Renovation work in the chamber of the Superintending Engineer, OM, Puducherry Region and Providing of false ceiling in the System Control Centre and Server room at Main Office Campus, Electricity Department, Puducherry II Call

Amount

Removing dry or oil bound distemper, waterproofing cement paint and the like byscrapping, sand papering and preparing thesurface smooth including necessary repairsto scratches etc complete

Dismantling doors, windows and clerestorywindows (steel or wood) shutter including chowkhats, architrave, holdfasts etc.complete and stacking within 50 metres lead- of area beyond 3 sq. metres

Dismantling tile work in floors and roofslaid in cement mortar including stacking material within 50 metres lead - forthickness of tiles 10mm to 25mm

Supplying chemical emulsion in sealed litre containers including delivery as specified- Chlorpyriphos / lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemicalemulsion) - Treatment of existing masonryusing chemical emulsion @ one litre perhole at 300mm interval including drilling holes at 45 degree and plugging them withcement mortar 1:2 ( 1 cement : 2 coarseand) to the full depth of the hole - with chlorpyriphos / lindane E.C. 20% with 1% concentration

Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed inposition with hold fast lugs or with ashfasteners of required dia & length (holdfast lugs or dash fastener shall be paidfor separately) -Vengai wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type , core of block boardconstruction with frame of 1 st class hardwood and well matched teak 3 ply veneeringwith vertical grains or cross bands andface veneers on both faces of shutters - 35mm thick including ISI marked StainlessSteel butt hinges with necessary screws

Providing 40 x 5mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30 x10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS: 1868), transparent or dyed to requiredcolour or shade, with nuts and screws etc complete - 300 x 16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating notless than grade AC 10 as per IS :1868), transparent or dyed to required colour orshade, with necessary screws etc. complete- 300 x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc, complete -100 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10as per IS : 1868) transparent or dyed torequired colour and shade with necessary screws etc complete - Single rubber stopper

Providing and fixing factory made uPVC door frame made of uPVC extruded sections havingan overall dimension as below (tolerance +_1mm ), with wall thickness 2.0 mm (+-0.2mm), corners of the door frame to be jointedwith galvanized brackets and stainlesssteel screws , joints mitred and plasticwelded. The hinge side vertical of theframes reinforced by galvanized M.S.tube ofsize 19 x 19 mm and 1mm (+-0.1mm) wallthickness and 3 nos. stainless steel hingesfixed to the frame complete as permanufacturer's specification - Extruded section profile size 42 x 50 mm

Providing and fixing to existing doorframes - 30 mm thick factory made PolyvinylChloride (PVC) door shutters made ofstyles and rails of a uPVC hollow section of size 60 x 30 mm and wall thickness 2mm (+- 0.2 mm) with inbuilt decorative moulding edging on one side. The stylesand rails mitred and joint at the cornersby means of M.S. galvanised / plasticbrackets of size 75 x 220mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced byinserting galvanised M.S.tube of size 25x20mm and 1mm (+- 0.1mm) wall thickness. Thelock rail made up of 'H' section, a uPVChollow section of size 100 x 30 mm and 2mm (+-0.2 mm) wall thickness, fixed to theshutter styles by means of plastic /galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichamberedsingle panel of size not less than 620mm,having overall thickness of 20mm and 1mm (+_ 0.1mm) wall thickness . They panelsfilled vertcally and tie bar at two placesby inserting horizontally 6mm galvanised M.S.rod and fastened with nuts and washers, complete as per manufacturer's specification

Providing and fixing of 65 mm Godrej Navatal lock of 7 levers with 3 keys etc complete

Providing and fixing aluminium die castbody tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weightupto 35 kg and door width upto 700 mm), with necessary accessories and screws etc complete

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make (Jhonson /Asian / Somany / Nitco) in all colours, shades of size 200 x 300 mm as approvedin skirting, risers of steps and dados,over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand) and jointing withgrey cement slurry @ 3.3 kg per sqm,including pointing in white cement withpigment of matching shade complete - size 200 x300 mm

Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to bespecified by the manufacturer), of 1stquality conforming to IS :15622, ofapproved make (Nitco / Kajaria ) in allcolours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thickbed of cement mortar 1:4 (1 cement : 4coarse sand), including pointing the jointswith white cement and matching pigmentsetc., complete

Providing and fixing PVC corner beading of required size to suit the thickness of thewall tile at the corner joints of dado works

Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre lowlevel white P.V.C. flusing istern, including flush pipe, with manuallycontrolled device (handle lever), conforming to IS: 7231, with all fittingsand fixtures complete, including cuttingand making good the walls and floorswherever required - W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with .I. brackets, 15mm C.P. brass pillar taps, 32mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required - white vitreous china flat back wash basin size 450x300 mm with single 15mmC.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC wastefittings complete - semi rigid pipe - 32mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete

Providing and fixing PTMT towel rail complete with brackets fixed to woodencleats with CP brass screws with concealedfitting arrangement of approved quality andcolour - 450mm long towel rail with otallength of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms

Providing and fixing CP brass health faucet of approved quality - 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms - 15mm nominal bore

Providing and fixing C.P.brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS: 8931- 15mm nominal bore

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres andunder including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the wallscomplete including disposal of rubbish to the dumping ground within 50 metres lead -with cement mortar 1:4 (1 cement : 4 fine sand)

Providing and applying ready mixed wallputty (JK / Birla) of 2 mm thickness overplastered surface to prepare the surfaceeven and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacturern wall surface - water thinnable cement primer

Applying priming coat - with ready mixed pink or grey primer of approved brand andmanufacture on wood work (hard and softwood)

Painting with synthetic enamel paint of pproved brand and manufacutre to give aneven shade - Two or more coats on new work

Varnishing with varnish of approved brand and manufacutre - Two or more coats of gluesizing with copal varnish over an undercoat of flatting varnish

Wall painting with plastic emulsion paint - Premium of approved brand and manufactureto give an even shade - two or more coatson new work

Chipping the worn out wall and concrete portion using proper tools and removing the loose particles and proparing the surface for treatment with wire bruch etc., complete until to reach good surface and removing the debris and disposal of the debris as directed by the Engineer-in-charge with all leads and lifts etc., complete.

Removing the loose particles / rust / mill scale deposits completely duly cleaning it with wire brush / crush sheet etc., and removing the dust over the old concrete surface and providing and system based aromatic Rust remover of CERA / SIKA / FOSEOC / MC Bauchmie / DON / DASF or Equivalent make certified and tested by accredited Institutions (Confirming to IS: 9077-1979 (reaffirmed - 1997) Appendix B, Clause 5.3.3) including all tools complete as per manufacturers specification and as directed by the Engineer-in-charge.

Applying a polymer based anticrrosive coating material of CERA / SIKA / FOSROC / MC Bauchmie / DON / BASF or Equivalent make certified and testing by accredited instritutions mixing mechanically unitl it is homogeneous and applying the same as one rich coat on prepared steel surface with brush with all lead and lift etc., complete and as idrected by the Engineer-in-charge (Measurement as per the total area of treatment)

Plastering the wall surface with cement mortar of mix 1:4 (one part of cement: 4 fine sand) mixed with styrene butadiene styrene rubber latex of CERA / SIKA / FOSROC / MC Bauchmie / DON / BASF Or Equivalant make certified and tested by accredited institutions (confirming to ASTM 1059-99 for bonding agent, Physical properties: Compressive strength 7.5 + or -2.0MPa, Tensile strength 2.0MPa at the ratio of 1:1:5 (1 part of cera polymer Latex : 1 part of water; 5 parts of cement) in 2 coats including all lead and lift etc. complete as per manufacturer's specification and as directed by the Engineer-in-charge.

Providing one coat of petro resin based curing compound of CERA / SIKA / ROSROC / MC Bauchmie / DON / BASF or Equivalent make certified and testing by accredited institutions (confirming to ASTM C309 - 99 & ASTM C15699(A) over the finishing surface immediately after de shuttering of concrete surface or final trowelling of plastered surface with all lead and lift etc., complete and as directed by the Engineer-in-charge.

Providing and fixing sun control film approved brand and quality. The rate include the cost of adhesive compound, labor for fixing and transportation etc., complete all as directed by the Engineer - in - charge

Providing and fixing vertical blinds of 100mm and louvers made up of non woven faabrics of approvesd make and quality of requirerd depth and length. The rate includes the cost of 45x32x1.3mm powder coated head rail and control unit,alumonium tilt rod ,moulded plastic runners,moulded design spacers,polystre fibres trnsverse card,2mm polyster card having 42mm ABS plastic heads,tilterchain,corsd weight,bottom weight and transporting the mterials to the work site aand lbour for fixing etc,Complete as directed by the Engineer -in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubularsections / appropriate Z sections and othersections of approved make conforming toIS:733 and IS: 1285, fixing with dashfasteners of required dia and size,including necessary filling up the gaps atjunctions , i.e at top, bottom and sideswith required EPDM rubber / neoprene gasketetc. Aluminium sections shall be smooth,rust free, straight, mitred and jointedmechanically wherever required includingcleat angle, aluminium snap beading forglazing / paneling , C.P.brass / stainlesssteel screws , all complete as perarchitectural drawings (Glazing, panelingand dash fasteners to be paid forseparately) - for fixed portion - Powdercoated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprenegasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) -with float glass panes of 4.0 mm thickness

Filling the gap in between aluminium frame & adjacent RCC / Brick / Stone work byproviding weather silicon sealent overbacker rod of approved quality as perarchitectural drawings complete - Upto 5 mmdepth and 5 mm width

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 20mm nominal outer dia pipes

Providing and fixing PVC switch lock of 100mm length for aluminium sliding windows

Providing and fixing PVC false roofing with the existing PVC cabin using sintex PVC section of size 6mm x 250 mm , having interlocking facilities supported in the PVC extruted multi chamber frame section of 40 x 48 mm , with necessary MS / Stailess screws. The rate includes the cost of sintex PVC section , labour charges for fixing and transport etc.complete

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead - thickness above 10mm upto 25mm

Providing and fixing special type ornamental carved designed dimensions corner type First class teak wood show beading to doors and window frames in partitions (piano design) and wodden flase ceiling with iron screws, plug including polishing the beading with melamine polishof two coats with base coat of melamine fillets. The rate shall include the cost of teak wood beading, all other materials labour charges, transport etc.,. complete size 70X35mm

Providing and fixing ornamental carved designed type Burma teak wood show beading (PIAS CHECK) to doors and window frames in parttitons false ceiling with iron screws, plug inclding of two coats polishing with melamine polish with base coat of melamine fillets. The rate shall include the cost of teak wood beading, all other materials labour charges, transport etc.,. complete size 70X10mm