GE (N) P/TOKEN - 02 OF 2023-2024 CERTAIN SPECIAL REPAIRS, LBW WORKS AND MINOR WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (N) PUNE

Amount

Taking down Old RCC Lovered Jalli/ Jaffery without harming the exisiting wall of Stone/ Block or Bricks masonry complete all as specified and directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brickwork/ PCC Solid block built in cement mortar and rubbish off the premises complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated Soil to a distance exc. 1.50 km but n exc. 5 km and depositing where directed

M&L for PCC 1:4:8 type D2 (using 40 mm garded broken stone aggregate) in foundation complete all as specified and as directed.

M&L Brick work with fly ash bricks, conforming to IS- 12894:2002, Non modular, class designation 75, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and directed.

M&L for precast Solid cement concrete block masonry exc 10cm width type C1 1:3:6 using 20mm graded aggregates using solid blocks of PCC design mix grade C5 set in CM 1:6 complete all as specified and directed

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick, block masonary or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick, block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on newly plasterd surface of roof/ wall /floor etc, over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for mild steel framed work such as grill, grating, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed.

Supply and fix polycarbonate fibre glass reinforced translucent corrugated/ Plain sheeting 6.00 mm thick hollow section fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Dismantling of structural steel work of any description complete all as specified & as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete including dismantling Corrugated or Semi corrugated AC sheets complete all as specified & as directed.

- do - all as per item No 18 above above but plain sheet fix in valley gutter / ridge complete all as specified & as directed.

S&F mild steel rolled section as in main cross beams purlins, rafters, frame and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed.

S & F of mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST.-240,as in main cross beams and running rails fixed independently with angle iron cleats or connecting pieces complete all as specified and directed.

Material and labour Prelaminated Gypsum board 08 to 09 mm thick as in false ceiling board of size 600 mm x 600 mm on and including GI powder coated grid work with using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). Note: Height of ceiling is above 5 metres.

Dismantling of stone slabs,cudappah, Paver Blocks, Chequered tiles etc of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified & as directed.

M&L for 25mm thick coloured Glossy Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for precast rubber moulded cement concrete glazed interlocking tiles,paver block, any shape and size as approved , 60mm thick, conforming to IS 15658-2006, M-35 grade in floor/pavement laid dry to the profile including 25mm thick sand bed/ cushioning vibrating with surface vibrator after laying of tiles complete all as specified & as directed. NOTE: Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample.

Material and labour 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for machine cut cudappah stone slab 20-25 mm thick as in lintels, shelves, vertical supports, fixed with neat cement slurry or arldite, including rubbing and polishing complete all as specified and as directed

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps straight or round in shape , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified & as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges as in Coping complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified & as directed.

Material and labour for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified & as directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified & as directed.

Supply and fix 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of Gde 304 wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples complete all as specified and as directed

Supply and fix factory made solid Panel Wood Polymer Composite (WPC) moulded door shutter, 28 to 30mm thick machine pressed, with 2, 4 or 6 raised panel design with 4mm thick moulded PVC sheet on the front face and 4mm moulded prelam colour PVC sheet on back face wirth wood free EPS, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour, pattern and size as approved, fixed with approved adhesive as per manufacturer’s instructions on horizontal and vertical surfaces etc. complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.

Supply and fix 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.

Supply and fix butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.

Supply and fix floor door stopper of brass alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm complete all as specified & as directed.

Supply and fix 150mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.

Supply and fix aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section of 3mm thick or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc including taking out existing/ old complete all as specified and directed.

Supply and fix aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete including taking out old/ existing all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed.. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified & as directed.

S&F Stainless steel utensil racks for modular kitchen including latches, magnetic hinges, handles and all necessary fittings required for modular kitchen, all as specified and directed by Engineer-in- Charge, Consisting Following components:- (a) Cup plate rack made of 3mm dia stainless steel wire (b) Meal Plate Rack made of 3mm dia stainless steel wire (c) Catlery Basket made of 3mm dia stainless steel wire (d) Bottle Basket Plate Rack made of 3mm dia stainless steel wire (e) stainless steel hinges 19mm long L type (f) Stainless steel hinges 12mm L type (g) Stainless steel hinges 6mm long L type. Notes:- (1) Weight of each unit shall be assessed at site (2) PVC parts/ shutters shall be measured and paid separately under Item No 49 Below

S&F Drawer Sliding channel fixed with screw and fittings fixture of 450mm long complete all as specified & as directed.

S&F 18 mm thick dark coloured solid PVC board suitablely fixed as in shelving, shutters of cupboard, kitchen trolly/ cabinets etc complete all as specified & as directed. Make- Rajshri/ Sintex/ Duraplast/ Accucell

Material and labour for cutting chases in brick wall, not exc. 0.5cm girth, pinning in for concealed water tubing and making good to facings where required and pointing to cement mortar (1:3) complete all as specified and as directed.

Material and labour for 10 to 12.00 mm thick PVC Coated mineral fibre false ceiling board of size 600 mm x 600 mm on and including GI powder coated grid work with using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. complete all as specified and as directed. Make :- Armstrong / Gyproc Diaken, New Age (ACE). Note: Height of ceiling is above 5 metres.

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified & as directed.

M & L Walling of random rubble, uncoursed as in well bonded, bedded and solidly hearted built in Cement mortar (1:4) etc including dismantling of stone masonery built in cement mortar and rubbish off the premises complete all as specified and directed.

Ditto all as per the item No 55 , but except stone complete all as specified & as directed.

M & L Providing, cement concrete (1:3:6) ,type C-1 (using 20mm graded stone aggregate) as in coping etc, rounded or chamfered on edges like including weathering, slightly rounded or chamfered angles and throating incl demolition / dismantling of existing concrete etc complete all as specified & as directed.

Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified & as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard dense soil complete all as specified & as directed.

M & L for hardcore of Broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified & as directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base complete all as specified and directed.

M & L for 50 mm thick cement concrete 1:2:4 type B-1 , using (20mm graded stone aggregate) as in floors finished even and smooth using extra cement complete all as specified & as directed.

S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 anyu size complete all as specified & as directed.

S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 5cm but n exc 10cm long dia of shank complete all as specified & as directed.

S&F flat iron straps to chain link fencing including drilling bolting or riveting etc complete all as specified & as directed.

Supply only chain link MS galvanised fencing incl line wire 50x50mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire complete all as specified & as directed.

M & L Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified & as directed.

M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & as directed.

M&L for preparation of old treated plastered / unplastered surfaces of walls by brooming down with steel brush including removal of moss, fungus, green growth of vegetation,make surface free from loose particles, oil stains etc etc and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of old treated plastered / unplastered surfaces of walls by brooming down with steel brush including removal of moss, fungus, green growth of vegetation,make surface free from loose particles, oil stains etc etc and applying one coat of oil bound distemper complete all as specified and as directed.

Taking down/ dismantling of wall paneling/boarding of any description, fixed in any position with nails complete all as specified & as directed.

S&F Solid PVC wall lining consisting of 5mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and as directed.(Make Rajshree/sintex) Note: PVC fillets and PVC strips shall be measured seperately.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification and drawing complete all as specified and as directed. (Make Rajshree/sintex)

Material and labour for false ceiling with 10mm thick 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of POP with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer including dismantling of existing ceiling of any description and any thickness including grid etc complete all as specified and as directed. NOTE: pop ceiling to be made in two /three tier design as directed)

M&L for POP decorative cornices/moulding to the pattern as approved, cross sectional area exceeding 13 Sqcm and not exceeding 25 Sq cm and fixed in decorative pattern including preparation of surfaces and applying two coats of acrylic distemper over a coat of primer matching with the colour of ceiling complete including dismantling of all as specified and as directed.

M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing with emeny papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces to receive new finish complete all as specified and directed.

M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces complete all as specified & as directed.

M&L for applying two coats of Oil bound distemper on ceiling, over a coat of alkali resistent primer complete all as specified and as directed. (note: height of building exceeding 5m)

M & L for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

- do- All as per serial item No.81 here-in-before but except tiles complete all as specified & as directed.

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc including dismantling of tile and rubbish off the premises complete all as specified and as directed.

Supply and fix for second class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete including dismantling of scantling and rubbish off the premises complete all as specified & as directed. (NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each).

- do- all as per serial item no 84 here-in-before but except batten complete all as specified & as directed.

M&L AC Fibre board Eves/ Weather Boarding 18 to 20mm thick or Feather Edged 15mm to 20mm thick complete as approved arch pattern any size and shape including taking down existing boarding complete all as specified and as directed. Make: V-Board(Visaka Industries Ltd)/Everest

Material and labour for Raised pointing to random or polygonal rubble uncoursed stone masonary walls in cement mortar 1:3 including raking out joints complete all as specified and as directed.

M&L RCC band (1:2:4) type B1 using 20 mm graded aggregate as in lintels/coping over 1.5 m span etc inluding weathring slightly rounded or chamferred angles including demolition of existing concrete complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with and including mild steel binding steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for preparation of old surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer on wall complete all as specified and as directed by Engineer-in-charge.

Material and labour for external coloured non skid ceramic tiles of size 300mm x 300mm x 8 to 10 mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

Material and labour for complete removal of existing treatment and applying two coats of 100% Acrylic exterior emulsion paint over a coat of primer to parapet wall/ Jaffery etc. complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premisescomplete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for GI tubing 15mm dia medium grade with all fittings & fixtures complete laid in trenches fixed complete all as specified and as directed

M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed complete all as specified and directed

M&L for masonry 10cm in width using ISI marked AAC block (Size- 625 x 250 x 100)of make "Powerlite" straight or curved on plan exc 6m mean radius, built using jointing adhesive manufactured by same company complete all as specified and as directed.

Material and labour for preparation of New plastered wall surface and applying two coats of oil emulsion distemper over a coat of alkali reistant primer over a thin layer (1 to 1.5mm) of wall care putty complete all as specified and as directed.

S&F in repair aluminum powder coated partition using ‘Jindal’ aluminum SP/DP section with 5mm thick tinted glass with PVC rubber bidding/12mm thick prelaminated particle board fixed with glazing clips etc/ both including taking down existing partition complete all as specified and as directed. by Engr-in-Charge.SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

M&L 75mm thick plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in floor, sub base, finished even and smooth with using extra cement including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed.

M&L for PU coating / Chemical waterproofing treatment to floor and walls using cementeous waterproofing material complete all as specified and as directed

S&F Coloured non skid ceramic tiles 300 x 300 x 6 to 7 mm thick, in floors etc., over 20 mm thick screed bed of cement mortar (1:4) and jointed in neat cement slurry and pointed in white or Coloured cement to match with colour of tiles complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 6 to 7mm thick of colour and pattern as approved by GE, as in vertical surface over 10mm thick backing coat in CM (1:4), set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles complete all as specified & directed.

M&L for coloured glazed ceramic highlighter tile of size 600mm x 300mm x 6 to 7mm thick, colour and pattern as approved by GE, as in vertical surface over 10mm thick backing coat in CM (1:4),set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles complete all as specified & as directed.

M&L for double charged vitrified ceremic tiles 8 to 10 mm thick (square/rectangular) polished, area of each tile exc. 0.42 sqm not exceeding 1 sqm, in flooring etc , laid over and including screed bed of 15 mm thick in cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade complete all as specified and directed.

Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for storage almirah, wall panelling and similar work to the size and pattern complete all as shown on drawing and as directed

Material and labour for 1st class hard wood plain fillets, square, rectangular or triangular in section, bull-nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails or brads, sectional area exc 13 and not exc. 25Sq.cm complete all as specified and as directed.

Material and labour for 4mm thick one side decorative group match veneer complete all as specified and as directed.

Material and labour for preparation of new wooden wall panelling surface and applying one or two or more coats of melamine polish with spray guns, compressor etc including filler, hardner and pigment of approved colour complete till fine glossy surface is obtained complete all as specified and as directed.

Material and labour for preparation of old treated wooden wall panelling surface and applying one or two or more coats of melamine polish with spray guns, compressor etc complete till fine glossy surface is obtained complete all as specified and as directed.

Supply and fix for powder coated aluminium single/double leaf, two panels, openable door , 5mm thick plain glass panes fixed with garware sun control film, fixed with rubber beading and glazing clips, alongwith supplying and fixing aluminium body hydraulically regulated door closer, designation No 2 universal type, suitable for sheet width 701 to 850mm of weight between 36 to 80 kg , mortice door lock, handle, tower bolt 200mm (02 Nos.), aluminium sliding bolt using aluminium sections all as specified and directed. Note :- Catlouge numbers of Jindal or equivalent company. (i) Top-19528 (ii) Middle-19575 (iii) Bottom-19530 (iv) Vertical-19526 (v) Glazed clips section No. 19381 and 19352 (vi) 1'' interlock (20939) (vii)1'' handle(20602) .

Supply and fix 100 mm size butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed type D-11 complete all as specified and as directed.

Supply and fix 200mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.

Supply and fix for brass mortice lock, vertical type, size 100mm of 4 levers with duplicate key complete all as specified and as directed.

S&F aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete all as specified and as directed.

Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/ Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

S&F in repair Pedstal type wash hand Basin of size 480mm x 560mm x 195 mm fixed in position including fixing of tap, waste pipe etc complete all as specified and as directed. Make: Jaquar Model ARIA Cat Part No – ARS-WHT-39801and 39301 or of equivalent make as per Appx 'A' as approved by GE.

S&F angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and as directed.. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repairs for 15mm dia PVC connection 450mm long including PTMT nuts etc complete all as specified and as directed

S&F in repairs chromium plated two way bib cock quarter turn with wall flange 15mm dia Cat No. QQT 7041 of make Jaquar series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repair for hand shower, chromium plated (health faucet) of ABC body with 8mm dia 1.2 metres long spirochrome flex tube and wall hook all as per Cat No. ALD-587 of make Jaquar or equivalent as approved by GE complete all as specified and as directed.

S&F chromium plated towel ring round, Cat No. AQN-7721 of make Jaquar Series or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F chromium plated toilet paper holder, Cat No. 7751 of make Jaguar Series or equivalent as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated single towel rail 600mm long including built in side brackets ,Cat No. AKP-35711 of make Jaquar ‘KUBIX PRIME' Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S & F chromium plated soap dish Jaquar make Cat Pat No CAN 1131N Continental Series or Equivalent complete all as specified and as directed.

S&F cast iron Nahani trap with grating of diameter of outlet 100 mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F Grating doom 100mm dia of Stainless steel complete all as specified and as directed.

Dismantling wooden scantling of any size and position complete all as specified and as directed.

S & F of mild steel work as in Roof battens complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST.-240, fixed independently with angle iron cleats or connecting pieces complete all as specified and directed.

Supply and fix 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'J' Bolts and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

Supply and fix in repairs 0.63mm thick Plain Galvanised mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashings (length and girth as fixed ) with grade of zinc coating 275 complete all as specified and as directed.

Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays / Pipe etc getting out in soft loose soil, complete all as specified and as directed.

Removing Surplus soils to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the starting Point, complete all as specified and as directed.

Supply & laying LT Power Cables, Aluminum stranded Conductor, XLPE Insulated, Cores Laid Up, PVC Innersheathed, Armoured, galvanised steel strip, Extruded PVC Type ST2 Outer Sheathed, 1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments, cross-sectional area 10 Sqmm 4 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed NOTE (i) Earthworks, Corrogatted pipe for cable protection, will be measured and paid under appropriate Items. (ii) Steel cable glands of adequate size , aluminium cable socket/ lugs ( bottle/ plate ) of required size at end termination in panel boards/ DBs , is deemed to be included in the item rate quoated.

Supply and laying Cable fit ( Double wall corrugated) as per IS16205 PART 24 Pipes Size 40 mm laid in trenches along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed.

Supply and fixing IP 55 Rating, Shockproof and rustproof ,Cable entry from bottom and/or sides , 100% weatherproof ,SMC/ FRP Material, Rectangular street light pole junction box of size 200X150X100mm with pole mounting arrangement and including of 4 pole connector/ terminal , Size 4 inch for street light cable connection complete all as specified and as directed. Make- Sintex, Hansel

Supply and fixing LED post top lantern 45 Watt fitting made in die-cast aluminium with innovative glare free indirect lighting distribution & IP 65 protection complete including provision of 1.5 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required complete all as specified and as directed . Make Bajaj Cat No BRIL 45W LED NW or equivalent

Supply and fixing LED ring bollard light IP65, Rated power 15 Watt including lamp having circular profile placed on top.Ideal for architectural outdoor lighting suitable to illuminating Gardens and walkways including provision of 1.5 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required complete all as specified and as directed . Make Orient Cat No LLRBL-15-W-B or equivalent

Supply and fixing Die cast aluminium housing, tempered glass di user, IP54, up-down light outdoor wall light 2x 3 Watt light fitting including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Jaquar Cat No- LWWL02X203XW

S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source and electronic driver of capacity 36watts, pre wired, necessary mounting arrangements and provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 1.5 metres long GI pipe medium grade bracket of suitable size & shape to light fitting mounting dia, secured and fixed with clamps made out of MS flat iron of size 25mm x 5mm, nuts, bolts etc, taking down old unserviceable fitting from existing postion & carrying to store, making good disturbed surfaces complete all as specified and as directed fitting Make Jaquar Cat No LSRT01S036XW or equvalent in Syska, Philips

Supply and fixing decorative wall Lamp Opal Glass fitting 7 Watt with Chrome Finish including Lamp: E-27 7W x 1 complete with all accessories prewired all as specified and directed ncluding provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed .Make- Jaquar Cat No KCH-CHR-MB160275541A

Supply and fixing 20/22 Watt Inverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FN1W020

Design, manufacture, supplying, installing in correct aligned position, making proper connections, testing and commissioning of LV panels (for metre board ) suitable for 415V, 3 phases, 4 wire, 50 Hz power distribution system, indoor type, IP42 rating wall mounting, sheet metal clad, cubicle, dust and vermin proof type, fabricated out of 16 SWG CRCA sheet steel, complete with earth bus bar and interlocked to avoid paralleling, adequate size cable alley, painting, etc as required as per specifications comprising of and including the following complete all as specified Incoming: one (1) 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 40-63 Amps Digital Electronic KWH Meter Fixing only serviceable electric meter obtained from dismantling of unserviceable meter box of 3 Phase and comnnecting complete with 10 Sqmm single ) Note :-Front opening door with locking arrangement but without locks as required & compartments of electronic phase meter shall be provided with the transperent glass .

Supply and fixing Energy Efficient BLDC Motor, wall mounted fan , Power-32 W consumption on high speed, Input voltage 90-245 V-AC single phase, Speed: 1350 RPM ,50 Hz , 400 mm sweep, 3 blade, and making connections complete all as specified & as directed. Make- Atomberg (EFFICIO +)

S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supplied and fixed Four pole MCCB, Thermal Release Range 63-80 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed

Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC surface conduit including all accessories after chasing in walls etc with Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame for modular switches , including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixturescomplete for two light point controlled by one, one way switch 6 Amps complete all as specified and as directed

Taking down carefully existing unserviceable main switch /cutout /DBs, Meter Board Box of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.

S & F Ceiling fan down rods 1.5 M Long of 15 mm dia GI pipe to the existing trusses of any height including necessary welding & fixing with clamps and nut bolts etc, complete all as specified and as directed.

S & F Ceiling fan down rods 2.0 M Long of 15 mm dia GI pipe to the existing trusses of any height including necessary welding & fixing with clamps and nut bolts etc, complete all as specified and as directed.

Taking down fan, (of any type) ceiling cable end, dismantling blades and removing fan and blades carrying to store for keeping in safe custody complete all as specified and as directed

Hanging only ceiling fan obtained from item Ser No 16 here-in-before after assembling and connecting up including provision of cable from ceiling rose or connector to fan & replacement of capacitor 2.5 MFD complete all as specified and as directed

Supply and fix ready made outdoor type heavy duty polymer earth pit chamber box of inner size 300mmx300mmx260 mm with provision of entry glands for earthing strip/ GI pipe and cover complete all as specified and as directed by Engineer-in-Charge. (Note sample is kept in GE Ofiice sample room)

M&L for Maintenance Free Grounding Solution set earthing comprising of High tensile low carbon steel rod of 3 Mts length & 17.2 mm dia with 250micron (average) molecularly bonded copper on the outer surface along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. Back-fill compound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground including taking out existing earthing complete all as specified and as directed. Make: JEF Technology or equivalant in True power earthings/Excel fibrotech NOTE :- (a) Rates for Excavation and earthwork in any type of soil/strata, testing on completion, Copper strip 20x3 mm and 40 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. (b) On testing, after completion, if the earth resistance < 3 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained. (c) Test certificate from the OEM has to be produced by the contractor for the material used in earthing

Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed. cable of the following size. (a) 10 Sq mm 2 Core

Supply and fixing LED street light fitting 36 Watt or above 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make Jaquar Cat No LPCRSRT 36WXC Note :- (i) GI medium grade pipe bracket of 1.5 Mtr length, size of pipe suitable to mouth of street light fitting along with nuts, botts washers and MS flat iron clamps of size as ordered shall deemed to be included in the unit rate quotated. (ii) Rate quated shall be inclusive of provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting

Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making good disturbed surfaces of wall by plastering disturbed surface smooth by applying two coats of same colour paint as existing, floor etc. complete all as specified and as directed.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes all as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSHH cable as earth continuity conductor to common earth with copper lugs and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No.163 above but with multistranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSHH cable as earth continuity conductor to common earth and connecting to earth dolly.

S & F for Modular Switch piano flush type, single pole, one way, 6 Amp, 1 module complete all as specified.

S & F for Modular Socket outlet 2/3 pin combined, 6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular switch, 1 way 16 Amp, 1 module piano flush type complete all as specified.

S & F for Modular Socket outlet 2/3 pin combined, 6/16 Amp, 2 module controlled by one switch piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for wall lamp 01 Light opal glass with nickel finishing of 07 Watt CAT Part No JNL- CHR-WLSL55004E27 of jaquar or equivalent all as specified and directed by engr-in-charge.

S & F for Ceiling rose, 3 phase/PVC/polycarbonate,surface Bakelite isolated body suitable ISI marked for batten fitting complete all as specified

S & F for modular type mobile charging socket double module for mobile charging USB type 1.5 amp 230 volt 50 HZ AC supply complete all as specified and as directed

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC heavy duty conduit/casing caping as per site requirement and its accessories including one run of PVC insulated 4.0 Sq mm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 4.0 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement and accessories will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawn through PVC non metallic rigid heavy duty conduit/casing caping as per site requirement and its accessories including one run of PVC insulated with 6.0 Sqmm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- four runs of 6 sqmm cable,one run of 6 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement will be measured as one unit

S & F for MCB DB VTPN 4 way with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 43 complete prewired including Bus Bar including MCCB 63/100 Amps 4 pole for incoming etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs double door with locking arrangement in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed . Make - Schneider/Legrand/L&T/ABB.

S & F for LED down light recess mounted luminare, round type 15 watts as per site requirement with efficiency of 1500 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz all as specified. Make- JAQUAR Cat part No. LNEP01R015XC or equivalent

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.

Supply and fix MCB Protected SRCD box 4 module 25 Amps with surface mounted PVC enclosure SRCD(socket residual current device) single pole with a three pin socket & top complete with 25 Amps MCB single pole. Make: Havells Cat part No DHDTCSN0251020 OR Equivalent Schneider/Siemens/Legrand.

Supply & fix in replament of old unserviceable decorative wall mounted energy saving 03 watt or above LED bedside light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories. Cat Part No 48042 of philips black & metallic or equivellent make all as directed by Engr-In-Charge

S & F for wall mounted LED 06 watts (WW) or more, 3000K with good color rendering (CRI>70) picture light fitting, 230 volts with durable aluminium housing and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, complete all as specified and as directed.. Cat Part No 31402 of philips or equivellent make.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting with peanut lenses luminaire with high power LEDs as light source and electronic driver of capacity 25 watts or above with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 0.6 to 0.9 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Jaquar LPCRSRT25WLC or equivalent.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 187 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly.

S & F for Modular socket, 6A/16A - 2/3 pin combined 2 module complete all as specified.

S & F for MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, fixed on wall good to disturbed surfaces, and connecting with existing cable complete all as specified and directed.

S & F for MCB Single pole and neutral rated capacity 40 amps, 240 volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 amps, 240 V breaking capacity 10 KA complete all as specified and as directed.

Taking down carefully ceiling/Exhaust fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan, replacement of fan condensor 2.5 Mfd and painted with synthatic enamel white colour paint by spray machine including filling of cavities with filler material complete all as specified and as directed.

S & F for LED down light recess mounted luminare, round/square type 15 watts as per site requirement with efficiency of 100 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz all as specified.

S & F for wall/ceiling mounted 10 watts indoor , box type light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 2' x 10 watts complete all as specified and as directed.

Supply and fix Rigid non-metallic PVC conduit of size 25mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknuts, saddles, pipe hooks etc complete all as specified and as directed.

M&L for cutting of existing 25 mm dia GI water tubing in position for altreation or insertion of booster pump complete all as specified and as directed.

S&F on replacement on- line pressure boosting pump , outdoor, weather proof electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia of capacity head 16 mtrs flow rate - 50 LPM power input 0.2 KW with three operating position OFF/AUTO/MANNUAL, IP 44 and components of ceramic radial ball bearing, copper stator winding , EPDM rubber gasket, aluminium oxide shaft carbon trust ball bearing, composit PP 30 % GF impeller including the integrated flow switch starts or stops the pump when a tapping point is truned on or off including electrical connections relaying of pipe lines, GI fittings and GI sheet cover complete all as specified and as directed. Make : Wilo cat No PB 200, Kirloskar, KSB

M&L for supply and fixing of 20 amp modular starter complete with modular plate all as specified and as directed Make : Havells, Coral , anchor Penta, Legrand Myrius.

S&F for 25 mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked , fixed to GI pipe complete all as specified and as directed.

Taking down and supply and fix 20 mm bore gun metal gate valve , cast/ ductile screwed down , high pressure with iron wheel handle , screwed both ends for iron pipe or unions complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 m and depositing where directed at level not exc. 1,5 m above starting point complete all as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

ANIL CONSTRUCTION CO.

J P ASSOCIATES

M/S Eknath agencies

Parhar Enterprise

Sai Construction