GE(S)/M-54/2021-22

Amount

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated material (soil) exc. 50 m but n. exc. 250m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains and the like complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in benching, coping, bed plates, seismic band, lintle, kerbs and similar works, finished even and smooth including weathering, slightly rounded or chamfered angles, throating and necessary form work complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs and mass concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in beams, cantilevers, bressumers, lintels, shelves complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed. NOTE:- Inner girth shall be measured for payment purpose.

M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

Description all as per srl item No 11 here-in-before but EXCEPT BRICKS complete all as specified and directed.

M&L for form work to sides of flat, fair finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical to batter complete all as specified and directed.

M&L for form work to sides and soffits of flat, fair finished surfaces of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for form work to sides of square, rectangular or polygonal, fair finished surfaces of concrete of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con forming to Fe.290.Gde-E-165 including dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Carefully dismantling existing barbed wire fencing with angle iron post embedded on wall and refixing the same on new or old locations after required repairing complete all as specified and directed. NOTE:- PCC for bed block and painting to post shall be measured and paid separately under respective items.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in sub base of floors, pavements etc complete all as specified and directed.

M&L for coloured 60mm thickness, M-35 Grade, machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006, laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.

M&L for coloured 80mm thickness, M-40 Grade, machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006, laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.

M&L for 12mm thick rendering in CM 1:4 on brick work and concrete surfaces of drain, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, and applying one coat of cement based paint, white or tinted, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of external wall and applying two coats of exterior weather coat paint including curing before and after, including a coat of alkali-resistant priming paint complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, and applying one coat of exterior weather coat paint, white or tinted, complete all as specified and directed.

M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F Reinforced cement concrete 450mm bore pipes, class NP-2, laid and jointed complete with collars including demolition of existing RCC pipe complete all as specified and directed.

S&F "as in repair" both side retro reflective sign board of size 900mm wide and 600mm high made out of 1.25mm thick aluminium sheet base covered with approved make self adhesive reflective transparent prismatic engineering grade PVC sheet of required colour on both faces and pasted in words/Figure/numbers of self adhesive computer aided machine cut sheet including mounting of sign board on MS frame (duly painted) made out of 47mm square pipe of wall thickness 16 gauge and leg height not less than 2.75m embeded in ground in plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) foundation of size 30cmx30cmx45cm complete all as specified and directed.

S&F "as in repair" both side retro reflective sign board of size 2400mm wide and 900mm high made out of 1.25mm thick aluminium sheet base covered with approved make self adhesive reflective transparent prismatic engineering grade PVC sheet of required colour on both faces and pasted in words/Figure/numbers of self adhesive computer aided machine cut sheet including mounting of sign board on MS frame (duly painted) made out of 47mm square pipe of wall thickness 16 gauge including hanging on ATC wall with hanging clips with necessary scaffolding complete all as specified and directed.

Taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of deberies out of MoD land complete all as specified and directed.

M&L for demolition of cement concrete (unreinforced) in ground floor and pavings n. exc. 15cm thickness (below or above ground level) including removal of debries out of MoD land complete all as specified and directed.

Desilting and cleaning of blocked storm water drain/nallah and culvert etc, by removal of mud, soil, aggregate, debries manually and removal to a distance exc. 500m but n. exc. 1 km and depositing in low lying area complete all as specified and directed.

M/S SEVENUP

M. C. ENTERPRISES

Bidder Name

surjit enterprises

M/S SEVENUP

M. C. ENTERPRISES