Providing Repairs to TGWRJC (G) Sudimalla (V) Yellandu (M) in Bhadradri Kothagudem District ( Reserved for SC Community as per GO 59, Dt:21.05.2018)

Chipping and scarifying the existing DPC/plum concrete surface or impervious surface up to 50mm thick to expose the virgin surface of the concrete using low/ medium vibratory chiping machine as a part of structural repair (TBSC-Q.VIII-12)

Plain Cement Concrete (1:5:10) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc. to site, mixing concrete in concrete mixer, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, excluding seigniorage charges etc., complete for finished item of work (APSS No. 402)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in Ground Floor (APSS No. 126) Category-B Steel

Provoding and fixing factory made solid wood polymer composite (WPC) single shutter door frame will have a rebate of 32mm/37mm .The two vertical members are to be joined together with the horizontal member using 8x75mm long MS Star full thrread screws to be used with reverse forward speed control hand drilling machine, The ready / assembled door frame is fixed to wall using Z hand fast 300mm long hold fast.

Supply and fixing of musquito mesh for windows including fixing of TW Batterns , cost and conveyance of all materials , sales and other taxes and all lanour charges , fixing in position etc.. Complete for finished item of work

Supplying & fixing of 1.22x 2.13 Mts. (Double Leaf) Door frame made of roll formed section of 1.25 mm thick CRCA section, size should be 50 x 75 mm with 32 mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality M.S.Powder coated butt hinges IS 205 125mm long of 6 Nos. along with Double flush door shutters solid bond wood block board type with commercial ply on both faces of 30mm thick including fixtures such as Mild Steel "Z" type Hold Fasts 6 Nos., M.S.Powder coated tower bolts I.S. 204, 300 mm long and 10mm BOLT dia 2Nos, M.S.Powder coated handles IS 208 125mm long 4No, M.S.Powder coated Aldrop IS 2681 300mm long 1No., M.S.Powder coated Door Stoper 2No., sales and other taxes cost and conveyance of all materials to site, all labour cahrges such as making of door frame, fixing in position,fixing of shutters, & hard ware fixtures, etc.,complete for finished item of work. The frame should be embedded to a depth of 40mm in the flooring.

WATER SUPPLY & SANITARY ARRANGEMENTS

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks inlcluding cost and conveyance of all materials to site labour charges etc., complete for finished item of work.

Supplying & Fixing Orissa Pan 580 mm x 440 mm white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI mark 580 mm x 440mm as approved by the Engineer-in-charge fixed in brick masonry with necessary ‘S’ trap of water closet, shall be encased in C.C. (1:2:4) 6" alround well above the joint, to stop leakage at the joint, cost & conveyance of all materials and labour charges etc., including sales and other taxes on all materials complete for finished item of work for all floors.

Supplying & Fixing 550 x 400 mm Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore single Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso/Nice/Senior or equivalent complete with standard CI brackets including wooden block, 12.7mm PVC connection with Brass union nut CP coated, 12.7mm dia first qualifty NP angle stop cock, 38.1mm CP waste coupling , 31.75mm dia PVC flexible waste pipe of 914.4mm length of first quality including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. for All Floors.

Supplying & Fixing of 12.70 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Supplying & Fixing tested Bronze / Globe valve 25mm as per IS -778 Classs I , Indian Make heavy type - make equivalent or screweds type 1st quality of approved type including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Supply and fixing of Ashiravdh CPVC pipes and fitting to meet the required of ASTM -D-2846 and are procuced in CTS 1/2" to 2" Ashirvad floe guard SDR 11 & SDR 13.5 pipes are made from idential CPVC compounds having the smae physical properties for Hot and Cold water (IS 15778:2007) 28.60 mm dia OD Pipes SDR 13.50

Supply and fixing of Ashiravdh CPVC pipes and fitting to meet the required of ASTM -D-2846 and are procuced in CTS 1/2" to 2" Ashirvad floe guard SDR 11 & SDR 13.5 pipes are made from idential CPVC compounds having the smae physical properties for Hot and Cold water (IS 15778:2007) 22.200 mm dia OD Pipes SDR 13.50

Supply and fixing of Ashiravdh CPVC pipes and fitting to meet the required of ASTM -D-2846 and are procuced in CTS 1/2" to 2" Ashirvad floe guard SDR 11 & SDR 13.5 pipes are made from idential CPVC compounds having the smae physical properties for Hot and Cold water (IS 15778:2007) 15.90 mm dia OD Pipes SDR 13.50

Supplying and fixing of 110mm dia 3 M Single Socket PVC/SWR pipe -4 Kg/sq.cm including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

RUPEES SEVENTEEN LAKHS EIGHTY TWO THOUSAND EIGHT HUNDRED AND EIGHTY FIVE ONLY