REPAIR TO JOINERY WKS, SUNKEN FLOOR, ROOFS, WATER TANKS, STAIRS, SANITARY ITEMS AND OTHER MISC WORKS AT NEW PINTO PARK AND APPROACHES TO BUILDINGS AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT - 10

Amount

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) area not exc 1.5 sqm each and removing from the site with and including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Description all as per ser item No 2.00 here-in- above but area exc 1.5 sqm and not exceeding 4 sqm each complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling wrought iron or mild steel works of any description as in posts, wire fencing etc, complete all as specified and as directed.

Demolition of concrete in ground floor and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed.

Demolition of stone slabs and tiles laid, beded and pointed in any mortar of any description or thicknes in floors, aprons etc complete all as specified and as directed.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framed work as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.

S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for 2nd class hard wood factory made 35mm thick glazed and skelten shutters open repated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered heads for securing glass/wire mesh etc size of member of shutter with sash bar complete all as specified and as directed.

S&F 35 mm thick plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12 mm thick veneered particle board medium density, wood particle board with commercial face veneers on both faces with shisham wood beading all round the panel made out of (20 x15)mm on one side and fitted to chowkhats complete all as specified and as directed.

S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed.

Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

M&L for PCC (1:2:4) type B-1 (using 12.5mm graded stone aggregate) for fixing of hold fasts and clamps etc complete all as specified and as directed.

S&F for clamps; hold fast; bands, straps, supports or stays for galvanised plain mild steel wire including bolts, rainwater, ventilating pipe and simillar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Dismantling boarding any description fixed in any position with screws complete all as specified and as directed .

S&F 19mm prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc and all necessary fittings (hinges, scrowes, beeding piece hasp staple) complete all as specified and as directed.

S&F for butt hinges, stainless steel, ISI Marked 100mm size, complete all as specified and as directed.

S&F for MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed.

S&F for aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm long complete all as specified and as directed.

S&F for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.

S&F for extruded aluminium alloy handles, fabricated type, 100 mm size complete all as specified and as directed.

S&F aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass, any thickness, size, quality, or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete upto 4th storey building complete all as specified and as directed.

S&F sheet glass 4mm thick quality fixing to aluminium door, steel and aluminium window shutters in any position with new beads/ steel section with oil putty for steel window as required for securing upto 4th storey building complete all as specified and as directed.

S&F figured glass pin headed type 3mm thick glazing with oil putty in square not exc 0.50 Sqm each panes upto 4th storey building complete all as specified and as directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

M&L for rubber beading of (50x15)mm size for fixing as in door cills and similar situation including necessary drilling/cutting etc complete all as specified and as directed.

S&F in repair 20mm dia aluminium drapery rod, coated finish with and including teak wood brackets & end knob as required with teak wooden curtain rings complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for steel, plain, black sheet 1.00mm thick as in wall cladding, steel gates and similar work, cut to size, holes round headed screws, clout nails or rivets and fixed to steel framing with plain 40mm lap joint with reveted or welded seams, including bending or turning up, mitred angles etc complete all as specified and as directed.

Taking down of aluminium doors any type any description and re-fixing in same opening after necessary repairing such as floor spring, locks, hinges, glass, rubber beading, handles, tower bolts etc complete all as specified and as directed. Note:- (i) The cost of screws, misc items shall be deemed to be included in the quoted rate. (ii) The cost of floor spring, locks, hinges, glass, rubber beading, handles, tower bolts etc shall be measured and paid seperately.

Taking down carefully existing aluminium sliding/openable window shutters, taking down of existing broken any thickness from aluminium window shutters including existing rubber gasket complete, supply and fixing 4 mm thick plain sheet glass with and including provision of new rubber gasket and re-fixing the shutters in existing position complete all as specified and as directed.

Taking down carefully existing aluminium sliding /openable window shutters, taking down of existing stainless steel wire mesh from aluminium sliding window shutters including existing rubber gasket complete, supply and fixing stainless steel wire mesh of dia 0.36 mm and average width of aperture 1.40 mm with and including provision of "U" clip, re-fixing the shutters in existing position complete all as specified and as directed.

Taking down carefully aluminium sliding window shutters from the frames or chowkhat and supply and fixing new locking arrangement in place of old one and re-fixing the same shuters in existing position etc complete all as specified and as directed.

Taking down of steel rolling shutter of any type and description and re-fixing in same opening after necessary repair, greasing, etc complete all as specified and as directed. Note:- Material to be used for repairing the steel rolling shutter shall be paid under relevent items of BOQ.

Supply only safety lever lock mild steel with 4 lever for rolling shutters complete all as specified and as directed.

Supply only ball bearing for rolling shutter complete all as specified and as directed.

M&L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fix welded wire mesh of size (100 x 100)mm of 3 mm dia wire, weight not less than 1.37 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting in cement mortar (1:3) average 30mm to 50mm thickness and thereafter rendering 10 mm thick plaster in cement mortar (1:3), mixed with water proofing compound @2% by weight of cement and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour for necessary scaffolding and safety arrangement for guniting work complete all as specified and directed. Note:- The finish of the surfaces to be matched with the existing surface. WPC shall be measured & paid separately under relevant item of BOQ as supply only.

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), surface finished even and fair with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed. Note:- WPC shall be measured and paid separately including necessary scaffolding up to (G+3 storey) under respective item of BOQ complete all as specified.

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of surfaces plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and shade including necessary scaffolding up to (G+3 storey) complete all as specified and as directed.

M&L for preparing old surfaces on ceilings and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old plastered surfaces on walls and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for complete removal of existing treatment of old plastered surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old surfaces on walls including brooming down or steel wire brushing, scrapping down and applying one coat of cement base paint of approved colour and shade including necessary scaffolding up to (G+3 storey) complete all as specified and as directed.

M&L for complete removal of existing treatment of old plastered surfaces on walls including brooming down or steel wire brushing, scraping down and and applyingtwo coats of cement base paint of approved colour and shade including necessary scaffolding up to (G+3 storey) complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood & wood based surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including over screed bed or bedding layer of morar 15 mm in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete with and including laid over 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces with and including laid over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exc. 0.11sqm but not exc 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, with and including laid over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Description all as per ser item No. 64.00 but as in skirting /dado with and including laid over 10 mm thick bedding layer of CM (1:4) complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles as in vertical surfaces of size (450x300)mm x 7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match with and including laid over 15mm thick cement rendering in cement mortar (1:4) as in backing coats of tiles finished the surfaces rough to receive tiles etc complete all as directed and as specified.

M&L for vitrified tiles coloured, light shade 10 mm thick, area of each tile not exceeding 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, with and including laid over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Description all as per ser item No. 67.00 but as in skirting /dado with and including laid over 10 mm thick badding layer of CM (1:4) complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings exc.15cm thickness (above ground level) including removal of debrish out of MoD land complete all as specified and as directed.

M&L for PCC (1:5:10) type E2 (using 40mm graded crushed stone aggregate) as in foundations, mass concrete and filling in sunken floor etc complete all as specified and as directed.

M & L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages:- Stage 1: Providing 15mm thick plaster in CM (1:3) mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd in the proportion/quantity all as per manufacturer's instructions. State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces. Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions. Stage 4: Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions. Stage 6: Providing 10mm thick protective plaster in CM (1:3) mixed with STP No.1 @ 250ml/50 Kg cement all as per manufacturer's instructions. Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. Note:- (i) Actual area treated (floor and adjoining walls) shall be measured and paid.

M&L for 25mm thick PCC (1:2:4) type B1, (using 20mm graded stone aggregate) as in sub floor including use of necessary use and waste of form work complete all as specified and as directed.

M&L for cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) exceeding half brick wall and not exceeding one brick wall complete all as specified and as directed.

S&F in repair vitreous china squatting pan, 'Orissa' pattern, size (580 X 440)mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, including flush pipe all fittings etc complete all as specified and as directed.

S&F in repair low level flushing cistern 10 ltrs capacity, and connections to pies an fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white,with inlet, including brackets complete all as specified and as directed.

S&F in repairs for cast iron nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and as directed.

S&F in repair CP Soap dish complete all as specified and as directed. Make-AKP-35731P of Jaquar or equvelent in kohler.

S&F in repair corner glass shelf with bracket of complete all as specified and directed. Make-ACN-1173 of Jaquar or equvelent in kohler.

Taking up or down 15mm dia steel tubing and connections including cleaning for refixing or removal to store complete all all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections including cleaning for refixing or removal to store complete all all as specified and as directed.

M&L for 15mm bore, medium grade, GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors, with and including cutting chases, pinning in making good to facings where required in pointing in cement mortar (1:3) for concealed water tubing including necessary scaffolding up to (G+3 storey) complete all all as specified and as directed.

M&L for 20mm bore, medium grade, GI tubing with all fittings and fixed complete to walls and ceilings or laid in floors, with and including cutting chases, pinning in making good to facings where required in pointing in cement mortar (1:3) for concealed water tubing including necessary scaffolding up to (G+3 storey) complete all all as specified and as directed.

Refixing old 15 mm bore GI steel tubing and connections in new or old position (walls, ceiling, floors, etc), including necessary new fittings complete all all as specified and as directed.

Refixing old steel tubing and connections 20 mm bore, in new or old position (walls, ceiling, floors, etc), including necessary new fittings complete all all as specified and as directed.

S& F in repair for 15 mm dia stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle fancy type screwed both side for iron pipe oe for union and fixed complete all all as specified and as directed.

S&F in repair pillar taps fancy type 15mm dia bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all all as specified and as directed.

S&F in repair chromium plated bib taps fancy type of 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all all as specified and as directed.

S&F in repair kitchen or laboratory sink made out of stainless steel 1mm thick with drainage board of size (915X460)mm & bowl size (410X330X160)mm complete with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over complete all all as specified and as directed.

S&F in repair health faucet with double lock, one meter long brass chromium plated steel flexible hose pipe and wall hook complete all as specified and as directed .

S&F in repair 15 mm angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm and fixed complete all as specified and as directed.

Dismantling water tank of capacity exc. 250 ltr and n. exc. 500 ltr and removing to store complete all as specified and as directed.

S&F 500 ltr capacity three layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Dismantling water tank of capacity exc. 500 ltr and n. exc. 1000 ltr and removing to store complete all as specified and as directed.

S&F 1000 ltr capacity three layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (minimum weight-142 gms)

S&F ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixedcomplete all as specified and as directed. (minimum weight-210 gms)

S&F in repair wash hand basins vitreous china flat back (450mmx300)mm size white, first quality, with and including chromium plated waste grating 32mm size, PVC waste pipe 25mm bore heavy duty Chain and plug and porcelain stopper, brackets of mild steel angle iron (35mmx35mmx5mm) of suitable size with and including two coats of synthetic enamel paint over a coat of primer complete all specified and as directed.

S&F in repair 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall with and including suitable iron clamps after every one mtr of interval including necessary scaffolding up to (G+3 storey) complete all as specified and as directed.

S&F in repair, 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall with and including suitable iron clamps after every one mtr of interval including necessary scaffolding up to (G+3 storey) complete all as specified and as directed.

S&F in repair CI 100mm bends with door complete all as specified and as directed.

S&F in repair CI 100mm single branch piece with door complete all as specified and as directed.

S&F in repair cast iron 75mm single branch piece with door complete all as specified and as directed.

S&F in repair cast iron 75mm double branch piece with door complete all as specified and as directed.

S&F in repair for cast iron cowls 100 mm size complete all as specified and as directed.

S&F in repair for cast Iron `P' Trap 100mm bore complete all as specified and as directed.

S&F in repair cast iron floor trap with CP grating including jointing to waste pipe with run lead, dia of outlet 100mm, set in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repair aluminium (die cast body) hydraulically door closer regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

M&L for provision of 2 mm thick cement based wall care putty applying on walls for smooth finish complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows, ventilators, partations with or more rebates including jointing cleats for fixing etc. complete all as specified and as directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F powder coated aluminium three track sliding type glazed window shutter with 5 mm thick plain sheet glass fixed open track section (100x38x1.5)mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section (38x12x1.5)mm and other standard sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips rubber packing, aluminium snap beading etc complete all as specified and as directed. Note:- The cost of glass panes /wire cloth / lock / handle required for the item shall be deemed to be included in the quoted rate.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F 12 mm thick prelaminated particle, board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to aluminium frame work complete all as specified and as directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for precast cement concrete RCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in landing cover slab, shelves troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

VIJAY KUMAR GUPTA (BID ID -3059371)

ETERNITY PROJECT (BID ID -3052893)

Commercial Traders (BID ID -3059411)

GIR RAJ BUILDERS (BID ID -3059549)

RK TRADERS (BID ID -3059338)

Shiv Shankar Nirman Co. (BID ID -3059253)

DEV CONSTRUCTION (BID ID -3062947)

R R ENTERPRISES (BID ID -3067044)