SPECIAL REPAIR REPLACE OF ACC SHEET SHELTER WORK ELECTRIC WORK AND PLASTERING PAINTING IN BLDG NO 206 208 209 MT GARAGE AND BLDG NO 215 VEHICLE REPAIR BAY AT BAMBOLIM CAMP UNDER GE PANAJI GOA

Amount

Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fixing for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with cross steel screws or self-tapping screws as specified complete all as specified and directed.

Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to quality 'B', Fe-410 (Gde E- 250) complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, over 10cm in width or girth complete all as specified and directed.

Material and labour for applying one coat (finishing coat) of synthetic enamel paint on old painted steel surfaces of any description not otherwise described, over 10cm width or girth including preparation surfaces complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for 15 mm thick cement mortar 1:6 on Brick or concrete surface finished even and smooth without using extra cement all as specified and as directed.

Material and labour for applying two coat of cement base paint over a coat of alkali resistant priming paint including preparation of new plastered surfaces of wall complete all as specified and as directed.

Material and labour for preparation of old surfaces of walls including complete removal of existing treatment and applying two coat of cement base paint complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster in cement mortar 1:4 on external fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surface complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.

Supply and fix 2nd Class H.W. plain solid straight chowkhats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints etc complete all as specified and as directed.

Supply and fix 35mm thick, 2nd class hard wood, kiln seasoned, chemically pressure treated, rail and style, factory made plain framed panelled shutter (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS: 1003 (Part-I), complete all as specified and as directed.

Material and labour 35mm thick 2nd class H.W Glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified in SSR Part I section clause 8.20(a) supplied and fitted to chowkhats complete all as specified and as directed.

Material and labour preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and as directed.

Supply and fix powder coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty of fixed with beads in square not exceeding 0.5 sqm each pane complete all as directed.

Supply and fix aluminium alloy wire cloth 0.45 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples/ wooden beads in repairs to existing shutter of any description complete all as specified and directed.

Supply and fix Butt hinges, medium weight cold rolled mild steel and fixed 100mm long complete all as specified and as directed.

Supply and fix Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long complete all as specified and as directed.

Supply and fix Aluminium handles cast type anodised 150mm long complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long complete all as specified and as directed.

Supply and fix Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete but gear operated type with bevel gear box and crank handle thickness 1.25mm in laths complete all as specified and as directed.

Supply and fix for Safety lever locks mild steel with 4 levers for rolling shutters.

Supply and fix for Ball bearing for rolling shutters

Material and labour for preparation of new steel surfaces and applying two coats of Aluminium paint over a coat of aluminium red oxide primer on surfaces of any discription, over 10cm in width or girth complete all as specified and as directed.

Supply and fix 300mm ordinary rat rail rod pattern spring including roller plate complete fixing mild steel spring complete all as specified and as directed.

Material and labour for preparation of Old steel surfaces and applying two coats of Aluminium paint on surfacess of any discription, over 10cm in width or girth.

Material and labour for cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar exc. Half brick but not exc one brick for inserting holdfasts and making good in dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and as directed.

Supply and fix for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if required, hooks (stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, handmade sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Demolition and dismantling cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness ( below or above ground level) complete all as specified and as directed.

Material and labour for 100mm thick cement concrete 1:2:4 (type B-2) using 40mm graded stone aggregate) complete all as specified and as directed.

Demolition of cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided complete all as specified and as directed.

Formwork to faces of walls retaining walls abutments, parapets and staircase railing and similar work, not exceeding 200mm thick (horizontal or sloping) complete all as specified and as directed.

Supply and fix TMT bars 10 mm dia and over, cut to length, bend to shape incl cranking, hooping etc. and binding with ms wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Material and labour for RCC M-25 using 20mm graded aggregate as in walls, retaining walls, ballast walls and the like any thickness, above top of footing including attached pilaster and buttresses slabs supported on walls beams and columns in floors , roofs and the like. All as specified and directed.

Taking down of existing Point wiring of any type any size including Complete fittings Such as Ceiling roses ,pendant holders, Batten Holders, shades regulator etc all as directed by EIC.

Taking down U/S Sub main wiring of any size including PVC conduit with all saddles and accessories all as directed by EIC.

Taking down carefully UNSV main switch DB including MCBS of any size make and capacity.

Material and labour for point wiring for one light point controlled by one way switch complete with 1100Volts grade 1.50 Sqmm PVC insulated unsheathed multistranded FRLSH grade copper conductor cable (Make: Anchor/ Havells/ Plaza/ Finolex/ Polycab) fixed/ drawn through and including white/ ivory colour heavy duty PVC casing and capping ISI marked of suitable size with all accessories/ fittings (Make: Prestoplast/ Pressfit/ Finolex/ Precision) and fixing on wall/ ceiling with and including providing PVC board with cover (ISI marked) for mounting switches, sockets, regulators etc. withand including one run of 1100Volts grade, 1.5 sqmm PVC insulated unsheathed multistranded FRLSH grade copper conductor cable as earth continuity wire and connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed.

All as per item NO. 47 above but one 3 pin 5 Amps socket outlet on same board with other switches.

All as per item No. 47 above but for one 3 pin 5 Amps socket outlet on independent board.

All as per item No 47 above but for one 3 pin 15 Amps socket outlet on independent board with cable 2.5 Sqmm size.

Supply & fix Switch piano, flush type, 5Amps, single pole, one way complete all as specified and as directed. Make: Plaza/havells, Anchor.

Supply and fix Switch Socket combination piano, flush type, 15 Amps, singel pole, one way complete all as specified and as directed. Make:- Plaza/havells,Anchor.

Supply and fix switch Socket combination piano, flush type, 5 Amps, singel pole, one way complete all as specified and as directed. Make :- Plaza/havells, Anchor.

Supply and fix ceiling rose surface bakelite 65x50mm two to three terminal all as specified and as directed. Make : Plaza/havells, Anchor.

Material & Labour submain wiring with two runs of single core PVC insulated FRLS, PVC shethed, 1100 Volts grade, multistranded copper conductor cable of size 6 sqmm (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through 20mm dia PVC pipe fixed to pole by means of suitable clamps with one run of 6 Sqmm PVC insulated FRLS PVC, shethed multistranded copper conductor cable as a continuous earth wire complete all as specified. Note:- (a) Two runs of 6 Sqmm single core copper cables and One run of earth conductor cable of 6 Sqmm will be measured and paid as one unit length. (b) Clamp/ PVC conduit pipe shall be measured and paid separately.

Supply and fix LED wall mounted light fitting 20 W LED, 230 Volt Energy efficient Box type epoxy power coated complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing Regulator step type 300 Watt 240 Volt for Ceiling Fan complete all as specified and as directed. Make - Plaza/havells,Anchor.

Supply and fix 70 W LED flood light fitting, 230 Volt Energy efficient IP protection 65 complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make:- Havells,philips,Bajaj.

Material and labour for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings Plaza/havells,Anchor.

Sheet metal enclosure,( DB’S) double door made out of CRCA Sheet, 240 Volts single pole and neutral with 200 Amps rated bus bar 8 way complete all as specified and directed. Make:- Plaza/havells,Anchor.

Sheet metal enclosure,( DB’S) double door made out of CRCA Sheet, 240 Volts single pole and neutral with 200 Amps rated bus bar 12 way complete all as specified and directed. Make:- Plaza/havells,Anchor.

Isolator SPN 6 to 40 Amps, 240 Volts Make:- Plaza/havells,Anchor.

MCB SP 6 to 32 Amps 240 volts, 15 Hz, 10 KA suitable for lightening load of capacity 6 to 32 Amps. Make : Plaza/havells,Anchor

Material and labour for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991) all as specified and directed by Engr-in-Charge. Note :- (I) The unit rate shall include for protection pipe, GI water pipe , wire mesh, funnel, excavation, RCC pit cover, PCC,Test point, 20x3mm copper from top of earth plate upto 5 meter above ground level and if GI protection pipe is less than 5 meter, no price adjustment shall be made.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4.0 core. Make:- Plaza/havells,Anchor,Polycab,

Supply and laying DWC HDPE pipe of outer dia of 40mm and inner dia 40mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable including bends complete all as specified and directed. Make : Rex Polyextrusion Ltd, Finolex, Suprem, Prince, Astral as approved by GE in writing.

Supply and fix DWC HDPE coupler of dia of 50mm to 120 mm complete all as specified and directed. Make : Rex Polyextrusion Ltd, Finolex, Suprem, Prince, Astral as approved by GE in writing.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5 m in depth and getting out in soft disintigrated soil for removing/laying of UG cables / Pipes etc complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5 m in depth and getting out in hard /dense soil for removing/laying of UG cables / Pipes etc complete all as specified and as directed.

Returning, filling including spreading leveling watering and well ramming in layers not exc 25 Cm thickness using excavated hard/dense soil complete all as specified and as directed.

Returning, filling including spreading leveling watering and well ramming in layers not exc 25 Cm thickness using excavated soft disintigerated rock complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point for soil complete all as specified and as directed.

Supply and fix GI tubing 50mm bore light grade for protection of cable fixed in wall or laid in trenches including taking down the existing pipe complete all as specified and as directed.

Genius Construction Co.

M/S. M M S ENTERPRISES

N VENKATESWARLU

industrial suppliers

elite enterprises

Sarkar Enterprises

OM INFRA

SAI ENGINEERS & CONTRACTORS

SHREE SHIV SHANKER ENTERPRISE

M/S jvsr constructions

M/s Abhay Enterprises