15th SFC Untied Grant 2023-2024 1st Insallment Construction of Parvathipuram Burial Ground and compound wall in Achanpudur Town Panchayat.

Earthwork excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales,murram, ordinary earth, earth mixed with 50% fair sized boulders etc., with initial lead and lifts including laying, sprading, levelling sectioning breaking clods etc., incuding all incidential changes complete as per standard specification for foundation SS 20B

Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90X60cm & 10 gauge stiffened, welded with steel angle of size 25 X25 X 3mm for boarding laid over silver oak joists (Country wood) of size 10X6.5cm spaced @ about90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2. for the following items. (RCC floor slab, roof slab, Rectangular / square, Tee / Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc.,) and For RCC Column and plain surface and For BEAM AND ROOF

RCC 1:11/2:3 (One cement one point five sand and three aggregates) mix using 20mm gauge hard granite broken stone jelly in all RCC works connected to the work excluding shuttering, Centering and cost of Reinforcement grills but including curing, finishing etc completed

Plain Cement Concrete 1:2:4 Mix (one part cement, two part M.Sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

BRICK WORK in cement mortar 1:5 (One cement and five sand) using best quality of country bricks of size 8 3/4 "X 4 1/4" X 2 3/4" for the following including curing etc., complete complying with standard specifications.

Supply and fabrication of steel and placing in positon TMT steel grills for RCC works as per design given including cost of steel and GI binding wire in floors etc., complete with standard specification

Supply and fabrication of steel and placing in positon TMT steel grills for RCC works as per design given including cost of steel and GI binding wire in floors etc., complete with standard specification

Supply and fabrication of steel and placing in positon TMT steel grills for RCC works as per design given including cost of steel and GI binding wire in floors etc., complete with standard specification

Supply and fabrication of steel and placing in positon TMT steel grills for RCC works as per design given including cost of steel and GI binding wire in floors etc., complete with standard specification

SPECIAL PLASTERING and finfishing all the RCC exposed surface such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (One cement and three sand) 10mm thick and including hacking the surfaces and providing necessary cement mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standarad specification.

PLASTERING walls with cement mortar 1:5(One cement and five sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges etc. complete.

Finishing the top of roof with one course of PRESSED TILES of size (23cm X23cmX2cm) approved quality in cement mortar 1:3.12mm thick mixed with water proofing compound confirming to IS @ 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by departmental officers.

M CHINNA THAMBI