801490/E8 PROVN OF PHOTO VOLTAIC POWER PLANT AT AFS HAKIMPET

Amount

BOQ Dated 23 Feb 2022

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to X are prepriced by MES under Ser No. 1 to 10. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for “Building or works” as listed in Schedule ‘A’ Part–I

Lumpsum price worked out by the contractor for “Internal Water Supply” as listed in Schedule ‘A’ Part - II

Lumpsum price worked out by the contractor for “Internal Electric Supply" as listed in Schedule ‘A’ Part–III

Lumpsum price worked out by the contractor for “Site Clearance / Land Development” as listed in Schedule ‘A’ Part - IV.

Lumpsum price worked out by the contractor for “Path / Hard standing" as listed in Schedule ‘A’ Part - V .

Lumpsum price worked out by the contractor for "Sewage Disposal" as listed in Schedule ‘A’ Part VI .

Lumpsum price worked out by the contractor for “Fencing” as listed in Schedule ‘A’ Part – VII.

Lumpsum price worked out by the contractor for “External Water Supply” as listed in Schedule ‘A’ Part – VIII.

Lumpsum price worked out by the contractor for “External Electric Supply” as listed in Schedule ‘A’ Part – IX.

Lumpsum price worked out by the contractor for “Lightening protection ” as listed in Schedule ‘A’ Part – X.

Sch 'A' Part - XI : Fittings / Fixtures & Misc items. INTERNAL WATER SUPPLY BLANK

Supply and fix 15mm bore angle cock cast copper alloy fancy type chromium plated for galvanised iron pipe complete all as specified and as directed.

SEWAGE DISPOSAL Material and labour for providing on site LLDPE septic tank designed to carry sewage and sullage water including excavation in any type of soil, PCC 1:4:8 foundation, Vent shaft, for connection for 25 Users etc complete all as specified and as directed.

Supply and fix sign board / Danger flags size 1.20m x 0.6m complete all as directed by Engineer in charge.

Supply and fix notice boards of size 1.20m x 1.2m complete all as directed by Engineer in charge.

INTERNAL ELECTRIC SUPPLY Supply and fix wall mounted LED batten fittings with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver for 22W/20W/18W LED (4ft) complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make:- Havells / Philips/ Crompton

Supply and fix LED security light fittings 25 watt capacity as building light with and including complete accessories for fixing the light to the building including GI pipe 1.5 mtr long bend to shape complete all as specified and directed.

Supply and fix exhaust fan with metal body, 230mm sweep, single phase, 230 volts, 50 Hz. Including making necessary arrangement of fixing with clamp on window and require size of window net all specified and directed by Engineer in charge.

Supply and fix MCB, SP, 'C' curve, 6 - 32 Amps, 10 kA ISI marked suitable for 415/240 volts operation, tested at CPRI, complete all as specified and directed.

Supply and fix Ceiling Fan complete with all accessories 230 V, 1200 mm sweep. BEE 5 star rating complete all as specified and directed by Engineer-in-Charge. Make : Havells/Khaitan/Usha

EXTERNAL WATER SUPPLY Supply and fix flexible hose 20 mm dia complete all as specified and directed.

Construction of valve chamber of size 600mm x 600mm x 600mm in 200mm thick Brick walls with sub class 'B' brick built in CM 1:4, rendering 10mm thick cement plaster on fair faces of brick work finished even and smooth (with out using extra cement) and providing 3mm thick MS plate hinged cover fixed to 25mmx25mmx3mm thick angle iron frame work on brick work chamber with locking arrangement including necessary earth work, excavation, PCC bedding & coping, applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and two coats of white wash on brick wall surfaces complete all as specified and as directed.

Supply and fix Monoblock pump set suitable for 415 volt TPN system having capacity 2 HP and all necessary fixing arrangements/connections and testing complete all as specified and directed

EXTERNAL ELECTRIC SUPPLY Design, Supply installation testing and commissioning of Set of Solar Modules 360 Wp or above, generating power of 0.95 MW capacity, (10% extra capacity to be considered for modules to compensate losses) mono crystalline Type, (minimum) 72 Cell duly connected using solar DC copper cables 1.1 KV, 4 Sqmm alongwith miscellaneous components like termination kits, lugs, sign boards, conduits etc.(cost of these items shall be deemed to be included in the cost of the modules) comprising of following technical specification and as specified in PS complete all as specified and as directed.

(a) Output power - Pmax (Watt peak)- 360 Wp or above (b) Modules should have efficiency of not less than 15% and the fill factor should be above 75% (c) Voltage at Pmax - 30.86 V minimum for 60 cells / 36.69V for 72 Cells (d) Current at Pmax - minimum 8.1A for 60 cells and 6.76A for 72 cells (e) Open circuit voltage - 36.86 V minimum for 60 cells / 36.69V for 72 Cells (f) Short circuit current - minimum 8.55A (g) Maximum system voltage (Volts) - 1000 V DC (h) Type of solar PV cell - mono crystalline silicon (j) Suitability - For grid connected system (k) Module output - MC electronics plug (Male and female) (l) Certification - The PV modules must conform to the latest edition of any of the following IEC/equivalent BIS Standards for PV module design qualification and type approval as per IEC61215/BIS14286 (n) In addition, the modules must conform to IEC 61730 Part 1(A1+A2+A11)-requirements for construction & Part 2(+A1)-requirements for testing, for safety qualification (o) Application Class - A (p) Safety Class - A (q) Fire rating Class - C (r) Power warranty - 10 year warranty on 90% of the minimum output and 25 years warranty on 80% of the minimum output (s) All above electrical parameter measured - Standard test condition (STC) of irradiance of 1000 W/m², AM 1.5 and cell temperature of 25° C

(t) Material and performance warranty: (i) PV modules including framework must be warranted by the contractor for output peak wattage, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years from the date of completion of work. Contractor shall obtain similar warranty from the original manufacturer and will submit the same to the GE (AF) Hakimpet. However contractor will be responsible for the enforcement of warranty which shall include (a) Defects and / or failures due to manufacturing (b) Defects and / or failures due to quality of materials (c) Non conformity to specifications due to faulty manufacturing and / or inspection processes. (d) If Module(s) fail(s) to exhibit such power output in prescribed time span, the contractor / manufacturer will be bound to either deliver additional PV Module(s) to replace the missing power output with no change in area of site used or replace the PV Module (s) without claim of no extra cost at the sole discretion of GE (AF) HAKIMPET. An amount as detailed in Particular Specifications here-in-after shall be held against as security deposit. (e) The mounting structures of solar PV modules, electrical works and overall workmanship of the grid solar power plant up to inverter must be warranted for a period minimum 05 (Five) years as detailed in Particular Specifications. (u) TESTING: The entire system should work 75% of performance ratio otherwise the solar panels alongwith connected accessories to be replaced by the contractor at his own cost. Notes:- (1) No negative tolerance in the minimum certified module capacity is acceptable. (2) Modules only with the same rating and manufacturer shall be connected. (3) Module mounting structure and testing and commissioning of various elements solar plant shall be measured and paid separately under relevant items of Schedule. (4) Solar module shall be inspected and tested at factory in India in the presence of an officer detailed by the Accepting Officer before despatch to the execution site. (5) The solar module must be made in India.

Design, Supply, installation testing and commissioning of Solar Grid Connected inverter of capacity 1000 KW, 3 phase, 440 Volt, AC operated, 50 Hz (IP 42 / Indoor) complete with following features complete all as specified and as directed:-

(a) For initializing the inverters from the sleep mode, it is important that there is sufficient sunlight and that the Utility Grid is available. Sufficient sunlight in the morning is needed to provide adequate power to the inverter so that it could start up from the over night sleep mode. Availability of the Grid is required to the inverter as it has been programmed to a logic and a pre-set window of Grid voltage and frequency. If the available Grid has all these qualities for which the inverter is designed, it would initialize the main out put contactor and couple with the Grid and start evacuating the power to the Grid it is coupled with. In case the Grid fails due to any reason, the inverter should come to idle mode till the Grid comes back again. Even during the power evacuation, if the sun light falls below the desired limit, due to clouds etc., the inverter also stops working, although the Grid is available, till it starts getting the desired solar power required to power the inverter it self. (b) If the power evacuation goes on till the evening the inverter should keep on getting the desired solar power which is in excess of the power needed to operate the inverter itself. As soon as it attains the power which is just sufficient to run the inverter, the power evacuation stops and only the inverter keeps running till the power drops further low due to decreasing sunlight in the evening, resulting in the inverter going to sleep mode to initialize again automatically the next morning. (c) A record shall be maintained with input from inverter in the event of failure of the utility grid resulting in inverter going to sleep mode and stop generating power. (d) The Power Grid should have the following salient features:- (i) The PCU shall be made in India. The PCU / inverters should be tested from the MNRE approved test centres / NABL / BIS / IEC accredited testing-calibration laboratories. (ii) The charge controller (if any) / MPPT units environmental testing should qualify IEC 60068-2 (1, 2, 14, 30) / Equivalent BIS standard. The junction boxes / enclosures as per IEC 529 specifications. (iii) Built-in meter and data logger to monitor plant performance through external computer shall be provided. (iv) The power conditioning units / inverters should comply with applicable IEC / equivalent BIS standard for efficiency measurements and environmental tests as per standard codes IEC 61683 / IS 61683 and IEC 60068-2 (1,2,14,30) / Equivalent BIS Standard

(e) Economical requirements:- (i) Maximum efficiency 98.5%. (ii) Opti trac MPP tracking for best MPP tracking efficiency. (iii) Active temperature management with Opti cool. (iv) Bluetooth communication. (f) Simple requirements:- (i) Three Phase Grid feed-in. (ii) Cable connection without tools. (iii) DC plug-in system. (g) 1000 KW INVERTER parameters:- (1) Input (DC) (i) Maximum input DC power - 1200 KWp (ii) Maximum Input voltage - 1100V (iii) Operating voltage range - 600 V - 850 V (iv) Max. input power - 600 kWp (v) Max. input current - 1710 A (vi) Connection type -10 Pairs MC4 (2) Output (AC) (i) Max. Output power - 1200 KW (ii) Nominal power -1000 kW (iii) Nominal output Current - 1445 A (iv) Nominal output Voltage - 400V (v) Operating voltage range - ± 10% (vi) Power factor (Adjustable) - 0.8 ind - 0.8 Cap (vii) Output frequency- 50/60 HZ ± 5 HZ (viii) Harmonic distortion, current < 3 %

(3) Efficiency:- (i) Peak Efficiency - 98.80%, (ii) Euro Efficiency - 98.60 %, (iii) Width/Height/Depth in mm (W/H/D) - 3630/2130/708, (v) Environmental limits Degree of protection - IP 42 , (vi) Operating temperature - -25 to +60⁰ C (vii) Maximum altitude (above sea level) - < 2000m (viii) User interface and communications LCD. (ix) Communication Port RS 485 (x) DC switch - DC relays (4) Protection:- (i) Ground fault monitoring (ii) Anti islanding (iii) Grid monitoring (iv) DC reverse polarity (v) AC and DC short circuit current (vi) Over current (vii) Over voltage

Supply, install, test and commissioning of step up transformer outdoor inverter type suitable for plinth mounting complete with standard accessories or fittings suitable for 433 volts/11 kV (at no load), AC, 3 phase, 50 cycles, 4 wire, capacity 1250 kVA, double copper wound, oil immersed, C R GO core type, naturally cooled, built-up with class "A" insulation conforming to IS-1180 (Part-I) 2014 with following requirements.

(a) Continuous rating : 1250 kVA (b) No load voltage ratio : 433 V / 11kV (c) Tapping on HV : +7.5%, +5%, +2.5% (d) Phase and frequency : 3 Phase & 50 Hz (e) Vector group : Dyn-11 (f) Cooling : ONAN (g) Type : Outdoor (h) Terminal arrangement : (i) HV side : Quadfurcating cable box with 03 Nos bushing type terminals for connecting HT XLPE cable and 01 No for earthing. (ii) LV side : Quadfurcating cable box with 05 Nos compression glands for PVC cable, 01 No additional neutral terminal will be brought out separately for earthing purpose. (j) First filling of new and unused transformer oil conforming to IS-335-1993 (fourth revision) shall be marked, filtered and tested upto 50 kV dielectric strength at 2.5mm air gap between testing electrodes."

(k) Fittings (i) Externally Hand Operated Off - Circuit tap switch with position indicator and locking arrangement device. (ii) Conservator with oil gauge, filling hole with plug and drain hole with plug. (iii) Undercarriage with four plain rollers. (iv) Oil - Filling hole cum air release plug. (v) Drain valve cum sampling valve. (vi) TOP Filter valve with plug. (vii) Rating plate with diagram plate. (viii) Lifting lugs for transformer. (ix) Lifting lugs for core. (x) Earthing terminals. (xi) Thermometer Pockets. (xii) Silica Breather. (xiii) Explosion Vent. (xiv) 150mm Oil temperature indicator with alarm and trip contacts, (xv) 150mm Winding temperature indicator with alarm and trip contacts. (xvi) Marshalling Box with double window. (xvii) OCTC(Off circuit Tap Changer) (xviii) Buchholtz relay - 01 No. Note: Cost of PCC foundation with hand rail support duly earthed for transformer as per IE rules shall deemed to be included in the quoted rate.

Design, fabrication, supply, installation, testing and commissioning of HT Vacuum Circuit Breaker panel board, factory made, indoor type, metal clad, totally enclosed, free standing floor mounting type HT 11 KV, 3 Phase, 4 wire, 50 cycles, AC supply system suitable for housing trolley mounted vacuum circuit breaker, horizontal isolation and horizontal draw out type, cubicle fabricated out of CRCA sheet 3mm thick weather, dust and vermin proof, epoxy powder coated, protection class of IS-2147 with self contained air insulated compartments for bus bars and cable boxes with necessary supports and 800 Amp rated copper bus bar including cable galleries, interconnecting bus-bar connection / linkage, suitable for housing and including provision of the following switch gears including all pre-wiring with PVC copper conductor cable of suitable size, nuts, bolts and washers and in accordance with IS-13947 (Part-I) 1993 & IS-8623 and all as specified and directed by Engineer-in-Charge.

(b) Power Pack Unit - 01 Set Power pack unit with battery bank suitable for 30 minutes power backup with maintenance free lead acid cells alongwith racks and connections with suitable rating copper bus bar covered with PVC sheet and suitable rating of float cum boost battery charger of rating 230 Volt AC i/p, protection for i/p & o/p. Copper conductor unarmoured cable, 2 core, 10 sqmm of 25m length (approximate) with crocodile clamp / lugs on ends from LT panel to Charger for 230 Volts AC supply and battery charger to VCB panel. (c) Alarm System Common alarm with reset system shall be provided on panel board for circuit breakers trip, DC auxillary supply failure and AC auxillary supply failure. (d) AC auxillary supply 230 Volts Copper conductor unarmoured cable, 2 core, 10 sqmm of 40m length (approximate) from LT panel / DB to VCB panel. (e) Outdoor type 11 kV single phase resin cast dry type PT of ratio 11 kV / rt3 / 110V/ rt3, Class 0.5-3, burden 100 VA, insulation level 28 kV / 75 kV, voltage factor 1.2 Continuous and 1.9 for 30 Seconds conforming to IS-3156 - 03 Nos.

Design, fabrication, supply, installation, testing and commissioning of HT Vacuum Circuit Breaker panel board, attachment with existing VCB panels at MRS as per manufacturer / factory design including extension of busbar including modifications etc, indoor type, metal clad, totally enclosed, free standing floor mounting type HT 11 KV, 3 Phase, 4 wire, 50 cycles, AC supply system suitable for housing trolley mounted vacuum circuit breaker, horizontal isolation and horizontal draw out type, cubicle fabricated out of CRCA sheet 3mm thick weather, dust and vermin proof, epoxy powder coated, protection class of IS-2147 with self contained air insulated compartments for bus bars and cable boxes with necessary supports and 800 Amp rated copper bus bar including cable galleries, interconnecting bus-bar connection / linkage, suitable for housing and including provision of the following switch gears including all pre-wiring with PVC copper conductor cable of suitable size, nuts, bolts and washers and in accordance with IS-13947 (Part-I) 1993 & IS-8623 and all as specified and directed by Engineer-in-Charge.

(b) Power Pack Unit - 01 Set Power pack unit with battery bank suitable for 30 minutes power backup with maintenance free lead acid cells alongwith racks and connections with suitable rating copper bus bar covered with PVC sheet and suitable rating of float cum boost battery charger of rating 230 Volt AC i/p, protection for i/p & o/p. Copper conductor unarmoured cable, 2 core, 10 sqmm of 25m length (approximate) with crocodile clamp / lugs on ends from LT panel to Charger for 230 Volts AC supply and battery charger to VCB panel. (c) Alarm System Common alarm with reset system shall be provided on panel board for circuit breakers trip, DC auxillary supply failure and AC auxillary supply failure. (d) AC auxillary supply 230 Volts Copper conductor unarmoured cable, 2 core, 10 sqmm of 40m length (approximate) from LT panel / DB to VCB panel. (e) Outdoor type 11 kV single phase resin cast dry type PT of ratio 11 kV / rt3 / 110V/ rt3 , Class 0.5-3, burden 100 VA, insulation level 28 kV / 75 kV, voltage factor 1.2 Continuous and 1.9 for 30 Seconds conforming to IS-3156 - 03 Nos.

Design, Supply installation testing and commissioning , erection of module mounting structure alongwith fasteners, DC cables, MC connectors, AC cables, AC combination box, AC distribution board, earthing kit, lightning arrester, junction / combiner boxes (including the module junction box, string monitoring box and main junction box equipped with appropriate functioning safety including fuses, grounding suitable gland terminations etc.,) and installation accessories complete including have the following features complete all as specified and as directed:-

(a) Type - Linked Horizontal Single Axis Tracker system (b) Nominal DC Power of Tracker (c) Control algorithm: Astronomical Algorithms + Tilt Sensor close loop (d) Drive type: Slewing (Electrical drive based) with 2 motor per tracker (01 standby) (e) Tracking angle: (-) 45 to (+) 45 deg with HDG vertical post of 610 gm/sqm pre-galvanised rafter, bearing (minimum thicness of all membersshall be 4mm) designed for wind load capacity as per IS:875 (Part-3) : 2015 (clause 7.4.2.3 shall also complied with) and seismic load as per IS -1893 (Part -) 2016. Steel shall be hot rolled steel conforming to IS - 2062-2011. (f) Redundancy Design: Backup Control System and Backup Drive Motor (g) Material : Mild steel structure, Hot Dip Galvanised of 610gm/sqm, corrosion resistant and electrolytically compatible with material used in modular frame. The fasteners shall be stainless steel to fix with the modules and also with the foundation. No welding to structural members shall be used in mounting structure. The contractor shall submit the design, length, section, detailed layout etc., of the structure, duly approved by IIT/NIT to Accepting Officer. (h) Minimum ground clearance should be 500 mm above Highest flod level. (j) Design Wind Speed: 160 kmph (k) Max Stow Time: <5min (l) Tracking Accuracy: < ±2° (m) Number of junction/combiner boxes (including the module junction box, string junction box, array box and main junction box equiped with appropriate function, safety including fuses, grounding etc) shall be as per SPV modules string combinations. (n) Structure design shall be carried out using STAAD PRO connect software (latest edition). aAllowable Interaction ratio (Pass ratio ) for steel members shall be not less than 0.8 (o) Vetting of structural design and structural Drgs shall be got done from IIT/NIT. vetting certificate duly signed by the Professor of structural Engineering on Institute letter Head and bearing Institute file No, shall also be submitted. (p) Number of MC connectors for modules shall be as per SPV modules string combination (q) Supply fixing of HDG Cable Tray size not less than 300x50x2mm ladder type tray with cover & support, for MCR ties for cables with proper identification Marks on Trays (r) Supply, fixing of cable accessories heat shrinkable tube ,aluminium /copper lugs ,cable ferrules, aluminium cable tags, foams, painting of earth strip in green color etc (s) Supply, fixing cable ties with UV protected black cable, for 450mm length, 100 no. of ties/pack (t) Supply, fixing OD DWC HDPE conduit - positive / negative separate with its accessories like coupler, tee, plus etc (u) Material and labour for lightening protection to the grid with poles, aluminium rod 12mm dia 300mm long, test point gun metal or bronze size 75x75x25mm, aluminium strip 25x3mm, earthing pits as required at site complete all as specified and as directed.

Design, Supply, installation testing and commissioning of SCADA system which should be capable of communicating with all string invertors, energy meters, protection control and relay panels, transformers alarm and trip signals, circuit breaker status, weather station with server which should be a PCU with latest chip set technology and storage > 1 TB and supply and integration of mini RTU / Telemetry-data communication, state load despatch centre (SLDC) - (Telemetering unit interface scope) via GPRS / GSM /Suitable MODEM etc and provide information data logs of the entire solar PV grid connect power plants for the local monitoring at plant control room at site as well as remote monitoring via internet with suitable protection as per IEC standards. The SCADA shall be inverter level monitoring compatible and shall have features of remote access (control through WEB / App based control through mobile / PC) to the real time data and combination of wired / wireless technology as per design by the OEM and also supply and fixing of monitoring system i.e. suitable monitor, PC etc with local as well as web operating provisions for monitoring the generation and plant running parameters remotely complete all as specified and as directed:-

(a) The following parameters shall be accessible via the operating interface display in real time separately for solar power plant:- (i) AC output Voltage. (ii) AC Output current. (iii) Output Power (iv) Power factor. (v) DC Input Voltage (vi) DC Input Current. (vii) Time Active. (viii) Time disabled. (ix) Time Idle. (x) Power produced (xi) Protective function limits as below:- 1. AC Over voltage, 2. AC Under voltage, 3. Over frequency, 4. Under frequency ground fault, 5. PV starting voltage, 6. PV stopping voltage. Notes:- (a) All required items like Data logger, SIM, wire / cable required for the function of SCADA (cables within the SCADA system and to be connected with the SCADA) are inclusive and other items required for proper functioning of the system are deemed to be included in the quoted rate. (b) Required earth work shall be measured and paid separately under relevant items of this Schedule

Design, Supply installation testing and commissioning of CCTV camera net work complete with the following accessories complete all as specified and as directed:- (a) 2 MP fixed bullet camera - 6 Nos (b) 2 MP Manual PTZ dome indoor 360 degree rotation 3 X Zoom camera -2 Nos (c) 8 Bay NAS with 2 Nos 4 TB HDD- 2 Nos (d) 24 Port web management POE Switch -2 Nos (e) 32 inch LED display monitor - 2 Nos (f) Supply and installation of Computer system with 36 inches LCD Monitor 16GB RAM Minimum 4TB HDD with i7 Processor Intel Dual Quad Core Key Board Laser Printer and Mouse , 5KVA UPS complete with Licensed Software (Server configuration). graphics card with , keyboard and mouse and installed with motion detection video management Software - 2 Sets. (g) Wall mount rack made of FRP suitable for housing the NAS of size not less than 600mm x 300mm x 450mm (depth)- 2 Sets. (h) UTP Cable required shall be deemed to be included in the rate quoted.

Design, Supply installation testing and commissioning of Weather monitoring system which comprises the following features complete all as specified and as directed:- (a) Weather station sensor:- All in one Model (Ambient temperature, Relative Humidity, Air pressure, wind speed, wind direction, Solar radiation) alongwith RS 485 convertor - 01 No (b) Module temperature sensor:- PT 100 or equivalent-01 No (c) Silicon Irradiance sensor for PR calculation-01 No (d) All cable / wires required within the weather monitoring system and to connect to the system are deemed to be included in the rate quoted. (e) Testing and commissioning of various elements solar plant shall be measured and paid separately under relevant items of Schedule. (f) A record shall be maintained with input from weather monitoring system for duration when the inverter goes to sleep mode and stops generating power because of insufficient lighting.

Supply and fix Fire extinguisher with liquefied CO2 of capacity 10 kg ISI marked conforming to relevant IS complete all as specified and as directed.

Supply and fix Fire extinguisher with liquefied DCP (Dry Clean Powder) of capacity 10 kg ISI marked conforming to relevant IS complete all as specified and as directed.

XLPE insulated multistranded, armoured, halogen free, heavy duty electric cable with aluminium conductor, 1100 volts grade, single core, cross sectional area 300 sqmm laid in trenches / drawn through pipe / fixed on walls / bare in road crossings / paths / drains / ducts / floors / fixed on poles / equipments complete all as specified and as directed. Note:- Earthwork, sand cushioning, protection for cable etc., as required shall be measured and paid separately.

Design, fabrication, supply, installation, testing and commissioning of factory made LT distribution panel board, outdoor type, of overall dimension not less than 1200mm x 1000mm x 400mm made up of CRCA sheet 3mm thick, with cubicle pattern modular and compartmentalised construction, front and rear operated hinged doors, double shuttered, with locking arrangement, weather, dust and vermin proof, epoxy powder coated, to minimum IP-54 protection class of IS-2147, floor mounted free standing type, LT 415 volts, 3 Phase, 4 wire, 50 cycles, including cable galleries, interconnecting bus-bar connection / linkage, suitable for housing and including provision of the following switch gears including all pre-wiring with PVC copper conductor cable of suitable size, nuts, bolts and washers and in accordance with IS-13947 (Part-I) 1993 & IS-8623 and all as specified and directed by Engineer-in-Charge.

(a) Aluminium bus bar with rating 200 Amps 3 phase and neutral with epoxy insulated coating with colour code and aluminium earth bus of size 25mm x 3mm mounted on suitable insulators with terminal switch - 01 Set (b) MCCB, 415 Volt, 3 pole, of capacity 63 Amps and rupturing capacity not less than 25 KA - 1 Nos (incoming ) (c) DOL Starter with all accessories, 415 Volt, 50 Hz of capacity suitable for 2 HP, 3 Phase, motor - 2 Nos (d) Single phase preventer with reverse phase protection, 415 Volt, 3 Phase, 50 Hz of rating 10 Amps - 3 Nos (e) LED type pilot indicator lamps RYB phases with backup fuse, Set of three - 01 No. (f) MCB SP 10 Amp - 03 Nos (g) The LT panel board shall be kept 450mm above ground level, mounted by means of suitable bolts and nuts grouted into platform of PCC 1:3:6, type C1, using 20mm graded stone aggregate, using 20mm graded stone aggregate, over PCC foundation of 100mm thickness in PCC 1:4:8, type D2 using 40mm graded stone aggregate, the exposed brick / concrete surfaces shall be rendered in CM 1:4, 10mm thick, finished fair and even and applied white wash three coats.

Material and labour for Cable route indicator of oval shape, size 250mm x 250mm x 6mm thick of cast iron with letters embossed and fixed on 25mm x 25mm x 3mm mild steel angle iron 500mm long including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface embedded in PCC block of size 300mm x300mm x 300mm, 1:2:4, type B1 using 20mm graded stone aggregate buried in ground complete all as specified and as directed.

Supply, Installation Testing and commissioning of solar street lights 21 Watt with integrated MPPT charge controller, 5M Pole, Battery capacity 75AH, 80 Wp solar and LED driver with specific deep discharge batteries of 100% autonomy complete with mounting structure as specified and directed Make : Havells CAT Part No. 21W Solar or Equivalent of Bajaj/Philips.

Supply, installation, testing and commissioning of UPS online 2 KVA system with battery backup 30 mins together with MS battery stand and connectors:- (a) UPS 2 KVA (b) Single phase AC input, 160 to 260 V and output 230 + 1% (c) IGBT based system (d) 32 bit microprocessor based UPS to delivery accurate power (e) Battery details: Sealed maintenance free batteries (06 Nos:- 12 volts - 26 AH) (f) Battery make : Exide or equivalent (g) UPS to Battery cable upto 10m distance

Supply, installation, connecting, testing and commissioning of wall mounted split AC units indoor & outdoor complete with cordless remote control unit, with inverter technology of capacity 1.5 TR, 5 star EER 3.2 adjustable inclusive of suction and discharge lines of suitable size and length of copper tube including necessary brazing and providing nitrile tubing over gas circulating copper tubes and neatly tying the ends with PVC insulating tape and mounting on suitable bracket inclusive of suitable drain pipe for disposal of waste water upto ground level including cutting holes in to stone /walls built in cement mortar or cement lime mortar and wall of cement concrete not exceeding 150 sqcm area of holes for running copper tubes from indoor to outdoor split unit and testing neatly finishing the disturbed surfaces of walls to match with the surroundings complete etc all as specified and directed. Make : Carrier /Hitachi/Voltas/Blue star/ Daikin

Supply and fix Electronic Voltage Stabilizer having 5 KVA capacity, wall mounting type naturally air cooled having features such as intelligent time delay system, low and high voltage cutoff protection , latest IC technology to protect from power fluctuations thermal over load protection wide input variation between 170V to 270V with output voltage stabilized at 220 to 240V with accuracy of + 2.5% suitable for Air conditioner complete all as specified and directed. Make : V Guard /Automatic Electrical/ Vinitec/Brent Ford/Power Ware meerut

Supply, laying, testing of LT Cable DC power cable 2 runs of single core 240 Sqmm 1100 volts with multi standard aluminum conductor XLPE insulated confirming to IS (ST-2) PVC inner sheathed (C2 category type FRLS) (ST-2) PVC outer sheathed complete incl suitable size and terminations with glands lugs, etc complete for connection from all SPBs to PCU/Inverter all as specified and directed.

Supply, laying, testing of LT Cable 1.1 KV 4 runs of single core 300 Sqmm per phase copper conductor XLPE insulated multistranded armored, PVC sheathed conforming to IS of required run for current carrying capacity in LT side for connection from PCUs to Inverter transformers and suitable size end terminations with glands. lugs etc complete all as specified and directed.

Material and labour for riddle sand dry spread compacted / rammed / punned down for cable cushioning in trenches complete all as specified and as directed.

LIGHTENING PROTECTION Material and labour for PCC Block 1x 1x2 Ft by using 20 mm graded aggregate for fixing of GI pipe 50 mm bore complete all as specified and directed.

Sch 'A' Part - XII : Manning and operation Operation and comprehensive maintenance of Solar PV power plant system of capacity 1.0 MW on turnkey basis by providing all services inclusive of daily, monthly, half-yearly and yearly as detailed below in shifts of three with 01 No of Qualified Tradesman and 01 No unskilled worker under the expert supervision of one degree / diploma holder (Once in a fortnight or shorter interval as required) including Sunday and holidays (Performance demonstration during defects liability period.) (a) OPERATOR SCHEDULE Shift of 8 hours 0600 to 1400(Ist Shift), 1400 to 2200(IInd Shift), 2200 to 0600(IIIrd Shift) (b) The operation and maintenance of Solar Power plant shall be carried out for a period of 24 (Twenty four) months after the date of completion of the project i.e. during the defects liability period also considered as performance demonstration period. Note: Repair / replacement of solar modules, mechanical structure of solar module, electrical work, minor spares, chemicals and consumables and overall workmanship of grid solar power plant upto Inverter is already covered under material and performance warranty

Phoenix Infra

TRIVENI CONSTRUCTIONS