SPL REPAIR TO ALL THE INTEGRATED ANALYSIS GROUP IAG ROOMS AT NDC UNDER GE NEW DELHI

Demolition of brickwork stone/boulder masonry built in cement mortar including all quoins, pillars etc by breaking up or down, separation of serviceable material from the unserviceable,incl removing the demolished material outside the MOD land.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6 with old size bricks complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.ecx 15 cm in thickness below or above ground level & removing the rubbish out of MoD land.

M&L 75mm thick cement concrete type D-2, 1:4:8 (40 mm graded agg) as in sub base complete all as specified

Supply & Fix Italian marble with border(3-4 layers as per dwg att in appx) 75mm to 100mm width flooring of approved sample in slab of 20mm (+/- 2mm) thk on upto 40mm thick white cement mortar bedding, joint shall be grouted with white cement paste pigmented to match shade of the marble. Marble shall be free from cracks. Flooring to be finished by tinoxide polished, pattern should be followed as per drawing . Marble honing and scrubbing with task 42 d machine with flexible diamond pad 200x to 6000x buffing the same surface to get mirror effect on floor. Analysing the quality of marble scrubbing with chemicals to make it dirt free, with 42 ds taski swiss made machine, Soaking the soapy dirty water with industrial vacuum cleaner, Clean the floor with soft water to remove the soapiness. Proper Marble cutting and mirror polishing work, proper boarder marking as per instructions complete all as specified and directed by Engineer in charge.(Makes : Calacatta Gold, Italian Statuario, Carrara) photo of flooring pattern is attached for guidline of pattern.

M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed PMM (Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.

Taking down plastering on brick or stone walls, etc. incl racking out joints, hacking for key, scrubing down with water, etc.in cement or cement lime plaster, any description.

M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge

M&L 5mm thick Ready mix plaster (Make : Ultratech) on concrete surfaces on ceiling finished even and smooth complete all as specified and as directed by Engr-in-Charge

M&L for preparation of the newly plastered surfaces of ceiling applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two coats of distemper approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M&L for preparation of newly plastered surfaces of walls and providing and applying plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. with necessary scaffolding/form work required for completion of work upto sixth storey height including all safety factor

M&L for preparation of old decorated plastered surfaces of walls/ceiling complete removal of existing treatment by rubbing , brooming down, washing with water etc and providing plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : old work (two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. with necessary scaffolding/form work required for completion of work upto sixth storey height including all safety factor

Dismantling boarding, any description, fixed in any position with nails.

S&F 18/19 mm thick HDHMR board CNC cut with PU coat polish with 3mm thick wooden teak vineer laminate both side fixed with aluminium screws for wall hung incl all fittings fixtures and builder hardware etc and the edges shall be covered with PVC banding tape complete all as specified and as directed by Engr-in-Charge etc Makes : Kitply/M/s Green Ply, Century Ply.

S&F 18/19 mm thick HDHMR board CNC cut with PU coat polish/paint with 3mm thick wooden teak vineer laminate one side fixed with aluminium screws for wall hung incl all fittings fixtures and builder hardware etc and the edges shall be covered with PVC banding tape complete all as specified and as directed by Engr-in-Charge etc Makes : Kitply/M/s Green Ply, Century Ply.

S&F 25 mmx10mm thick HDHMR moulding as per sample kept in AGE B/R KH office alongwith wall and corners incl two coat of PU paint after preparation of surface complete all as specified and as directed Half round/ Quirk/ Bead(Double ended)/ Any other of similar type as specified by engineer in charge of specified dimension. Makes : Crown, Beak, Ogee, Ovolo, Double Step

S&F prelaminated Wooden slat panel of 6 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasters including necessary moulding work on doors, windows, pillers and opening etc complete all as specified and directed. Note:- (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.

S&F 55 mmx30mm thick HDHMR moulding as per sample kept in AGE B/R KH office alongwith wall and corners incl two coat of PU paint after preparation of surface complete all as specified and as directed Crown/ Beak/ Ogee/ Ovolo/ Double step / Any other of similar type as specified by engineer in charge of specified dimension

S & F senses akustik+ 9mm thick felt panel for reducing and controlling reverberated noise for wall & ceiling application with an NRC of 0.50, panel composition of 100 % wool felt, which is free of harmful substances. CII green pro certified , class-2 green building products . size of panel 1200mm x 2400mm Fixing as per manufacturer guidelines. Wastage will be extra. ,Weight 2400 g/sm Density 2.3 kg/m3 fire retardant properties AS/NZ 3887 Group Classification 3 Smoke Development Index 7- AS/NZ 3837 Group Classification 3 Color Fastness to Light ISO 105-B02 1994 (Grey Scale 1 to 5) 3 complete all as specified.

S&F 18mm thick PVC Jallies CNC machine cut as per the approved pattern and design as sample kept in GE Office. The PVC Jallies shall be fixed with the help of screw/nut bolt of suitable size and numbers as decided by the Engr-in-Charge. PVC Jallies shall be fixed to the existing steel frame work after replacing of rusted steel including necessary welding work complete all as specified and as directed by EIC. Note : MS steel work will be measured and paid seprately. Make Rajshree/Echon or equivalent as approved by GE

Dismantling wrought iron or mild steel work of any description no otherwise provided for as in grills, framaed railing etc.

S&F for Steel work in tubular trusses confirming to Fe 410-W Gde 250 A including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 complete all as specified and as directed

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed.

Dismantling wall & ceiling boards of any description as in panelling ceiling, partition, cup boards etc incl cover fillets in any surfaces complete all as specified and as directed

S&F false ceiling of 12.5mm thick square/tapered edge Gypsum board with floral pattern POP photo attached as appx and GI frame work for covered sunken or raised for any design as per approved conforming to IS : 2095, at all height & levels, as per approved drawing ,including providing steps as per design and pattern with complete GI ceiling suspension system. GI perimeter channel of 20x28x30x0.5mm is fixed to the wall/partition with impact anchor at not more than 600mm c/c. GI Ceiling angle of 25x10x0.5mm is fixed to the ceiling with soffit cleat of 27x37x25x1.6mm and with the help of Rawl plug 8dx45mm. The other flange of soffit cleat is fixed to GI ceiling angle with 12mm hex bolt and nut. The spacing for GI ceiling angle shall be 1220 c/c. GI Intermediate channel 15x45x15x0.9mm shall be fixed to ceiling angle at 1220 c/c with metal to metal screw. 80x26x0.5mm ceiling section shall be fixed at 450mm c/c. The ceiling section shall be fixed to intermediate channel with the help of connecting clip of high carbon spring steel wire and in direction perpendicular to intermediate channel at approx. 450mm c/c. The Gypsum board is fixed to the horizontal grid with self driven screws and joints are finished with putty & tape and one coat of primer. The joints to be finished with 48mm wide fibre tape to provide seamless finish. Work to include making and finishing of recesses for lighting fixture, preparing the board to take paint finish , providing cutting for trap door of required size for service access, Al. powder coated HVAC grills as per approval by Architect/HPCL, necessary coves,recesses as per design drawing, including cutting for access doors,sealing the joints with Air Drying Joining Compound or equivalent sealing materials, with flush bonded/ screwed securing of the hatch using a clip-lock mechanism that is integrated in the frame and concealed. Item to include all accessories, fitments, men & material & lift up to 50 mt., correct installation procedure, trap door cutting and necessary cutting in False ceiling strictly with unit template and finishing, necessary scaffolding, cleaning etc. complete. The finished surface including the cove surface will be measured for payment. Cove shall also be measured in sqm only. Note :- No extra will be paid for ceiling drops and it will be considered as flat ceiling and if there is projected drop ceiling curved as per design in different level it will also be paid as additional. No extra will be paid for light cutings. No extra will be paid if it is required channel/angle for additional supports for ceiling, continuous grill, diffusers, trap door for ductable unit, cassettes unit etc. Gypsum board shall be fitted and finished with base coat of putty, one coat of primer and 3 coats of plastic emulsion paint as per requirement and rate shall be inclusive of same.

Taking down chowkhats or frame with shutters without taking of shutters from frames exc 1.5 Sqm but not exc 4.00 sqm each & removing from site incl making good disturbed portion complete all as specified and directed.

M & L for taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each.

M&L for first class teak wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F first class teak wood 40mm thick panelled shutters plain, framed, panelled shutters ( any number of panels) with panels of timper feather edged teak wood planks supplied and fitted to chowkhats complete all as specified and directed.

S&F first class teak wood 30mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, guaze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-1 section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F 200 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed.

S&F 100 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed.

S&F Brass slidig door bolts 250 mm long and fixed with brass screws to wooden doors complete all as speciifed and directed.

S&F Brass butt hinges 125 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed

S&F Brass butt hinges 100 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed

S&F Brass handles 150 mm long polished bright with brass screws complete all as specified and directed.

S&F Brass handles 100 mm long polished bright with brass screws complete all as specified and directed.

S&F Brass wire, type -I gate and shutter hooks and eye 125 mm long complete all as specified and directed.

S&F Brass door stopper tounged with hard drawn steel spring 140 mm long complete all as specified and directed.

S&F Godrej door handle SEH01/Gold/7529 with all necessary fittings complete all as specified and directed.UNSPSC Code 46171598SD00935

S&F in repair door closer hydraulically regulated designation No 1 universal type, aluminum body suitable for door shutters of up to 700 mm in width and weight not more than 35 Kg and fixed complete all as specified and directed.

M&L for Prepartion of new untreated wood and wood based surfaces of any description over 10cm girth and applying two coats of synthetic enamel paint over a priming coat of pink primer complete all as specified and directed.

Dismantling A.C/Fibre sheet corrugated or semi corrugated sheet in roof coverings.

S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc

S&F 10mm thick coloured polycarbonate multiwell sheet manufactured from high quality, UV stabilzed reins in roof covering incl necessary fittings & fixtures like aluminium strips, aluminium tee , coach screw and washers etc with silicon joints filller for fixing complete of any colour all as specified and directed by engineer in charge.

S&F 4mm thick pre coated Alluminium Composite Panel cladding sheet of approved colour and shape, joint filled with silicon sealant, fixed as per manufacturers instruction complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness on steps, jambs, pillars, walls, cooking platform, floors, aprons, skirting etc laid bedded and pointed in any mortar complete all as specified and directed

M&L single pice/joint free Amber Onyx (Backlit) marble, translucent quality, allowing light to pass through and crete a war, glowing efffect with approved grained texture, premium astheick look (as per drg att) in vertical surface and like including jointed with chemical on a specefix frame/wall suitable for fixing of LED strip lithg. The cutting and polishing and laying by hightly skilled labours colour and shade, sand blested cut into shape and size (Horizontal and vertical shape using and placed anchars clamps in CM (1:4), with WPC Frameas directed by Engr in charge shall be as per aproved by GE all as specefied and directed.

M&L for 18-20mm thick coloured granite stone work Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite complete all as specified and directed by Engineer in Charge.

S & F 75mm ht. approved extruded aluminium skirting with Rubber strip fixed over masonry wall /opaque partition to proper line & level. with approved Screw, Complete as per manufacturer's specification, complete all as specified and directed.

S&F Brass finish trim wall stainless steel strip 2 to 4 mm thk SS strip width of 30 to 50 mm. PVD coated 8K mirror brass finish flat trim strip. Fixed over board/wall with adhesives.(Photos att as appx)

S&F in repair ZEBRA venetian blinds horizontal type incl guide rail, pulling thread etc incl taking down existing pelmets.

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fixture and fittings such as switches, light fittings,ceiling rose, pendent holders, bell, regulators and socket,light fittings etc .removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLSH type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLSH type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 25 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for the following :- Makes : Havells, Polycab, RR Kabel

One Light Point controlled by One No, One way 5 Amp Switch.

One Ceiling Fan/Exhast Fan Point controlled by One No, One way 5 Amp Switch.

One Three Pin 5 Amps Socket Outlet point controlled by One No, One way Switch on Independent Board.

One Three Pin 5 Amp Socket Outlet Point controlled by One No, One way switch on same board.

All as per item No. 55 here in before but with 2.5 sqmm (for Phase, Neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board. Note for item No 55 & 56 :- (i) Cutting chases for concealed conduit and making good in Cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

S&F Modular switch 230/250 Volts grade One Way (as catered in point wiring above) of following rating :-

Single Pole 6 Amp rating. Make : Legrand Arte Cat Part No 573400, Havells (Murano) - ACUSXXW101, Schneider- X1001WH.

Single Pole 16 Amp rating. Make : Legrand Arte Cat Part No 573410, Havells (Murano) - ACUSXXW161 Schneider-X1101WH

S&F Modular Socket outlet shutter type flush mounting type, 230/250 Volts grade (As catered in point wiring above) of following ratings:-

2/3 Pin 6 Amp Combined 2 module type. Legrand. Cat Part No 573470, Havells (Murano) - ACUKXXW063, Schneider-X2005WH

2/3 Pin 16 Amp combined 2 module type. Make : LegrandCat Part No 573471, Havells (Murano) - ACUKCXW163, Schneider- X2106WH

Supply and fixing of Modular MCB SP 16 Amps 240V 10 KA, C-Curve, fitted in main switch board, including 2.5 sqmm wire connecting power socket & modular MCB complete all as secified and directed by Engr-In-Charge. Make:Havells Cat No. DHFNCSPA016, LK (L&T) - CB93101KW16, Schneider Cat Part No. P8016-N.

Supply and fixing in replacement of Recessed max 10W COB based Accent lighting Adjustable downlighter. Luminaire made of die cast heat sink with Glossy Facetted diffuser. The luminaire should have CRI > 80 and CCT of 3000K/4000K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 100 lumen/Watt and a minimum system lumen output of 1000 lumens. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.90 , THD <10%.Luminare Operating Temp should be -10 Degrees to 45 Degrees & Input Voltage Range to be 140-270V with Driver Efficiency min 85% & Surge protection of 3.5 KV. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters along with technical data sheets of product. (Make : Philips, Jaquar, Trilux)

Supply and fixing in replacement of decorative wall mounted light Mirror Light, metalic housing in Metal & Aluminum Housing in bronze finish with Flexible neck for adjusting beam & Superior bronze finish. Fixture should have min Dimensions (mm) L= 800 mm W= 190mm H= 95mm. fixture should be integral type suitable for 1 x22W LED in lamp with CCT 3000K. Fixure must comply to IEC 60598-1, IS 10322 (Part5/Sec1). System delivered lumen 780lm & surge protection of Min. 2.5KV with WIDE VOLTAGE PROTECTION Range of : 160V-360V. (Make : Philips, Jaquar, Trilux)

Supply and fixing in replacement of wall mounted light Mirror/picture Light, metalic housing in Metal & Aluminum Housing in bronze finish with Flexible neck for adjusting beam & Superior bronze finish. Fixture should have min Dimensions (mm) L= 500 mm W= 80mm H= 95mm. fixture should be integral type suitable for 1 x12W LED in lamp with CCT 3000K. Fixure must comply to IEC 60598-1, IS 10322 (Part5/Sec1). System delivered lumen 420lm & surge protection of Min. 2.5KV with WIDE VOLTAGE PROTECTION Range of : 160V-360V. (Make : Philips, Jaquar, Trilux)

Supply and Fixing of aesthetically designed wall light single LED wall light fixture with opal diffuser to give glare free light including suitable LED having lamp base complete all as specified and as directed. (Make : Philips, Jaquar, Trilux, Homesake)

Supplying, installing, testing, and commissioning of flexible LED strip lights of length 5 Meter each (12V/24V DC), with high-brightness SMD LEDs (minimum 4W–12W/meter), fixed below bar shelves for accent lighting. The strip shall be housed inside an aluminum extrusion profile with diffuser cover, including suitable clips, end caps, and concealed fixing hardware. The system shall include necessary LED drivers, wiring connections, and switch/control provisions as per approved lighting layout. LED strips should provide uniform illumination, be cuttable on-site as required, and rated IP20 or higher for indoor use. (Make : Philips, Jaquar, Trilux)

Supplying, installing, testing, and commissioning of recessed/surface mounted LED spotlights, suitable for bar accent lighting, complete with high-efficiency COB/SMD LED light source, die-cast aluminum housing, reflector or lens for focused beam, and integral electronic driver. Fixture shall operate on 230V AC, and provide a narrow to medium beam angle (15°–40°) with high CRI (≥80), suitable for highlighting specific zones or objects. All accessories, wiring from junction box, mounting hardware, and aiming adjustment shall be included in scope. Installation to be done as per layout and interior design approval.(Make : Philips, Jaquar, Trilux)

Supply, installation, testing, and commissioning of 2 TR capacity Ductable Type, inverter type, Air Conditioning unit, complete with indoor unit (evaporator coil, fan, casing, insulated drain tray), outdoor condensing unit, refrigerant piping (Copper) with suitable insulation, electrical control cabling, vibration isolation arrangement, insulated flexible duct connections, canvas connections, and all necessary supports, brackets, and accessories for proper installation, as per manufacturer’s specifications and approved drawings. The unit shall be suitable for operation on 230V/415V, 50Hz AC supply, and shall be complete in all respects for efficient cooling and trouble-free performance, including charging of refrigerant, pressure testing, and commissioning at site. Make : Daikin, Hitachi, Mitsubishi

Disconnecting mains connection and taking out old distribution board any way SPN with 200 amp rated bus bar complete with MCB and making good to the disturbed surface all as specified.

S&F MCB DBs Single pole with neutral, Sheet metal enclosures double door type, 240 Volts, with 200 Amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete without MCB and with enclosures blank plate for unused way suitable for 12 Way including cutting chases and making good to walls. Make : Legrand 507611, or equivalent model in L&TPH108DD8 /Schneider NBKRESNDD08

S&F in replacment of MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule). Note : Make of the MCB should be the same as that of DB (Make : Legrand, L&T, Schneider)

MCB SP 5 to 32 Amps,Type-C

MCB DP 40 to 63 Amps, Type-C

MCB SP 40 Amps, Type-C

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 6.00 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 6.00 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSH type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed. Make : Havells, Polycab, RR Kabel Note (i) : Two (02 No) Runs of 6.00 Sqmm copper conductor cable, 01 Run of PVC Conduit and 01 Run of 6.00 Sqmm copper conductor earth wire shall be measured as one RM. (ii) Rate quoted for this item shall be inclusive of the cost of rigid non-metallic PVC conduit of 25 mm dia with Tees, Elbows, Reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 2.50 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 2.50 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSH type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed. Make : Havells, Polycab, RR Kabel Note (i) : Two (02 No) Runs of 2.50 Sqmm copper conductor cable, 01 Run of PVC Conduit and 01 Run of 2.50 Sqmm copper conductor earth wire shall be measured as one RM. (ii) Rate quoted for this item shall be inclusive of the cost of rigid non-metallic PVC conduit of 25 mm dia with Tees, Elbows, Reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

S&F in replacement of aestgetically designed ceiling mounted decorative chandelier light (Jhoomar light) medium size to be installed in the IAG Room of NDC with LED Bulbs of suitable size complete all as specified and as directed. Make : ARTXX Italian Chandelier 5051-12+8+4 or Equivalent

Central Air Cleaner for AHU Design, supply, installation, and commissioning of SEMI -HYBRID HEPA class ( polarization based ) central air purification system using Filterless Magnetic Air Purification Process of different capacities inside AHU to improve the air quality by removing microbial, pollution inside the air combined with a high kill rate on airborne infectious diseases using Ultraviolet Germicidal Irradiation. The system shall be designed for providing protection from airborne infection and maintaining Indoor Air Quality in AHU unit with the following features and technical specifications.. The air purification system must be IS 17570:2021 : ISO16890:2016 certified in accordance to ASHRAE 52.2 2017 with valid test data by ASHRAE validated lab having in USA only. The system shall meet EUROVENT ePM 1.0 80% requirement and ASHRAE guideline for UV-C application for airborne infection inactivation. It should be a monobloc-structured unit specifically designed for integration in the Return Air path of units of all sizes, to centrally capture and kill germs. It shall be in grids of sizes 610x370x150mm (1000 CFM), and 610x680x150 mm (2000 CFM) to cover the full capacity (CFM) of the units. (10000 CFM)

The central air cleaner unit should have no consumable parts and the minimum life of central air cleaner unit should be more than 10 years. The central air cleaner shall be capable of removing particulates as small as 0.01 microns including particulate matter PM 2.5 & PM 1.0, allergens, pollen, bacteria, pathogens and various VOC. The system shall be designed in accordance with Chapter 62 Ultraviolet Air and Surface Treatment, 2019 ASHRAE Handbook. It must be a monobolic-structured unit specifically designed for integration in return air path of air delivery systems to provide a single indoor air quality (IAQ) solution meeting global safety and performance standards set forth by ISHRAE, GRIHA, IGBC, CDC , ASHRAE & CPCB Notification No B-29016/20/90/PCI-L Manufacturer must comply with DIPP guidelines for public procurement policy notification No REGD No. DL-33004/99 dated 21 July2006 & Micro and Small Enterprises (MSEs) Order, 2012 inline with make in India initiative. For ease of supply and spares the OEM must have manufacturing facilities in India/Delhi NCR and support MAKE In India initiative. The OEM must strictly follow DIPP guidelines, Green Pro for more than 50 % Indian components and OEM registered under MSME will be given preference. Supplier must have experience of more than six years 'executing projects with the same technology products and have successful installation in CPWD /PWD hospitals/governments project. List of project need to be submitted for approval.

The below global certificate/ report is a must to ensure the performance, safety and reliability of the Air Purification being proposed • The central air cleaner must be designed to trap and kill microbes with high efficiency duly tested on E. coli (ATCC 15597), H1N1, as per ASTM E2149 with no less than 99% killing in less than 15 minutes. • The central air cleaner must be tested as per FDA GLP Regulations (40 CFR Part 160) for corona virus inactivation capability of over 99% in presence of FDA inspector in global labs. • The unit shall be UL2998 (that does not produces ozone, ozone generation shall be less than 50 ppb from an International Lab) & Intertek ETL, UL 867, CSA C22 No. 187, and CE certified for safety and quality and with EMC (Electromagnetic compatibility), LVD (Low Voltage directive) and RoHS compliant for complete modules. • The system shall be ANSI/ASHRAE 52.2 2017 tested with at least a MERV 15 rating and an ISO 16890 ePM 1.0 90%. • Each central air cleaner modules should be UL certified and not components or individual parts. The central air cleaner must be listed and certified by a US OSHA set standards duly implemented through NRTL accredited labs such as Intertek, Underwriters Limited, etc. to ensure safety and compliance with no consumable media filter. • The central air cleaner performance must be tested from a ASHRAE compliant from an International Lab third-party testing laboratory to confirm CME (Composite Minimum Efficiency) meeting following criteria: Particle Size CME 0.3 to 0.4 μm 90% • The failure to submittal the certifications along with the submittal. shall lead to rejection of the product. • For safety & security no arching, popping noise should occur during dust test. Also there should be no residual charge to avoid any shock risks.

The system shall meet EUROVENT ePM 1.0 80% requirement and ASHRAE guideline for SARS-CoV-2 inactivation. • The system should have a UL certified inbuilt pneumatic sensor allowing it to work as a controller (optional). It must automatically detect airflow and the capability to interface with the building management system. If the HVAC system is turned ON and the airflow is detected, then the output power should be available to the system, otherwise the system shall automatically turn off for the protection of service personnel. APPROVED MAKES : Trane/Dr Air / Magneto

Supply, Installation, Testing and Commissioning of Fresh Air Energy Recovery Air Purification ceiling mounted unit with triple functions of fresh air, energy recovery and air purification system.. The unit must have 04 stages of Fresh Air purification to control PM2.5, Germs, Bacteria, VOCs & odor through trap & kill technology. It must be a self contained sturdy unit with 02 no. of BLDC fan encased in MS body with powder coating. The unit must have minimum energy recovery efficiency ≥ 65% through anti microbial graphene - new age technology coated heat exchanger. It must have intelligent controlled with LCD display with functions control. The intelligent controller must have CO2& PM2.5 sensors to optimize performance of high PM2.5 efficiency & anti microbial capability. The system must also have manual and auto control function to recirculate the indoor cleaning of its indoor pollutants. Sound level should be less than 55 DBA at 1.5 meter. Preferences as mentioned in "Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012" shall be given to Micro and Small enterprises. For ease of supply and spares the OEM must have manufacturing facilities in India and support MAKE In India initiative. The OEM must strictly follow DIPP guidelines for more than 50 % Indian components. Make - Magneto/Drair/Trane Fresh Air Purification - Energy Recovery System 500 CMH - 01 Nos

Supply, installation and testing and commissioning of Air flow sensor. - 02 Nos

Please Enable Macros to View BoQ information