Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-AOC 417 OPP GYHAN DEVI SCHOOL SECTOR 10 GURUGRAM 122001 | GURUGRAM | GURUGRAM | HARYANA | 122001 | ₹1.3 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹1.3 Cr+₹2.5 L (1.97%)Rejected-AOC | ₹1.3 Cr+₹2.5 L (1.97%) | L2 | Rejected-AOC L2 |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹2.3 L
Closing Date
20 May 2022, 6:00 pmClosed
EEH2
Gurugram
Development and renovation of 13 nos park sector 38 ward no 28 zone IV MCG
2022_HRY_220525_1
MCG/EEH2/2022/18863
Open Tender
Civil Works - Others
Works
180 days
Gurugram
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
₹2.3 L
20 Sept 2022
10 May 2022
21 May 2022
10 May 2022
20 May 2022
10 May 2022
Amount
NS Item
(i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade.
Leg Press: Providing designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micror thick.
Supply and stacking of plants Tecomagaudichaudi 2'ht, 8''polybag, spread1' well grown
Harsingar 5'6" ht well grown
Supply of RH Pipe 1" dia.
Dwarf canna
Pebble dash exterior cement plaster on walls with a mixture of sand and gravel or crushed stone graded from 6 mm ot 12 mm nominal size dashed over and including fresh plaster in 2 coats first coat 10 mm cement plaster 1:4 and finishing coat 10 mm cement plaster with cement mortar 1:3 (1 cement, 3 sand, mixed with 10% finely ground hydrated lime by volume of cement including arises, chamfers and/ or rounded angles not exceeding 30 mm in in girth.
Hamelia patents cement bag
Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer
Supply of good earth work with 10 KM lead
Victorial Steel sitting bench of size 61"(L)x29½” (H)x 18½” (D). Seat with 5 steel pipe and back with five steel pipe of size 47mmx23mm rectangular of 16 gauge ISI mark e.r.w. spl. Pipe fixed with C.I. frame on both sides with durable nut-bolts duly welded to protect it unscrew. All duly anti rusting Red Oxide primered before P.U. bus green spray paint coating long lasting. (Including all taxes)
Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated wit main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be' made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of
Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete or minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base plate and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).
Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary
Chandini verigated in cement bag well grown Rate 70 Rs/unit
Bidder Name
Amount
M/s Sami Greenmax Landscape Pvt. Ltd.(GSTN-06AAPCS4484A1Z9)
Big Brother Traders(GSTN-NA)
Big Brother Traders
Big Brother Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .