Carrying out various electric works for shifting of TF, Pole, Lines and Panel in the area of Executive Engineer (Technical 2, 11 KV and LT) under the jurisdiction of the Superintending Engineer, Electricity Urban Distribution Circle, Mathura

Cartage of following material from Store centre, Mathura to work site.

ST Pole (11 mtr. Long) SP-55 (Bottom Portion Galvanized)

11 KV XLPE Cable 3x120 Sqmm.

LT Aerial Bunch conductor 3x120sqmm.

LT XLPE Cable Al. 3.5x400 Sqmm.

LT XLPE Cable 3.5x240Sqmm.

Distribution Box

11 KV Polymer Pin insulator

11 KV Pin wth Nut

11 KV Polymer Disc. Insulator

11 KV Disc. Fitting

11 KV TPMO

11 KV Fuse Set

MS T-off Channel (125x65x1300mm)

Cross arm M.S. Angle 65x65x6mm V-type

Cross arm holding clamp

Suspension clamp with I-Hook

Dead end clamp with I-Hook

ASCR Ins. Weasel Conductor

Clamps for LT T-off with bolts & nuts

MS Nut, Bolt & Washer

Top Channel

Top Channel (125x65x2240mm)

Dropper Channel (100x50x2028mm) For Fuse Set

MS Angle cross bracing

Clamp with Bolt & Nut

Holding clamp for Top channel, TPMO & Fuse Set etc. with Bolts & Nuts

Straight Through for 3.5x240 Sqmm. XLPE Cable

Outdoor type Jointing Kit for 11 KV 3x120 Sqmm.

Al. Lugs of 240 Sqmm.

Clamp for Distribution Box

LT Insulating connector for Distribution Box connection

ACSR Weasel Conductor for cable support

Stay complete

Digging of pit & erection of new 11 Mtr. long single support ST Pole

Digging of pit & erection of new Double Pole Structure STP Pole (11 mtr. long)

Fixing of MS T-off Channel (125x65x1300mm)

Fixing of X-arm M.S. Angle 65x65x6mm V-type

Fixing cross arm holding clamp

Fixing of Suspension clamp with I-Hook

Fixing of Dead end clamp with I-Hook

Laying of ASCR Ins. Weasel Conductor

Providing & Fixing of Danger Board with clamp for 11 KV

Providing & Fixing Barbed wire

Fixing Clamps for LT T-off with bolts & nuts

Concreting of ST Pole

Concreting of Stay

Concreting of Support

Earthing of Pole by MS Earth Rod

Painting the Pole by Al. Paint

Providing & Fixing Number Plate with clamp and Nut & Bolt

Fixing MS Nut, Bolt & Washer

Fixing Top Channel

Fixing Top Channel (125x65x2240mm)

Fixing Dropper Channel (100x50x2028mm) For Fuse Set

Fixing MS Angle cross bracing

Fixing Clamp with Bolt & Nut

Fixing Holding clamp for Top channel, TPMO & Fuse Set etc. with Bolts & Nuts

Providing & Fixing Al. leg long barrel off size

Providing HDPE Pipe 120mm OD PN-6 PE-100 UV

Laying 3.5x240 Sqmm. XLPE cable inside HDPE pipe by digging/drilling

Laying 3.5x240 Sqmm. LT XLPE cable and connecting with existing LT Panel.

Filling Straight Through for 3.5x240 Sqmm. XLPE Cable

Providing & Fixing Cable end termination using total double compression gland 240 Sqmm.

Fixing Al. Lugs of 240 Sqmm.

Shifting of existing A Type Panel from existing site and installation of Panel by making all connection with it.

Mesh Fencing of existing 400 KVA T/F. h=1.82m x w = 3.25m = 4xhxw = 23.66 Sqmm.

Chemical Earthing of existing A Type Panel

Laying of 3x120 sqmm. AB conductor for LT line on erected poles.

Laying of 11 KV, 3x120 Sqmm. XLPE cable on Pole and testing, commisioning & energization of cable.

Laying ACSR Weasel Conductor for cable support

Laying & Connecting LT XLPE Cable Al. 3.5x400Sqmm.

Laying & Connecting LT XLPE Cable Al. 3.5x240Sqmm.

Fixing Outdoor type Jointing Kit for 11 KV 3x120 Sqmm.

Fixing of Distribution Box

Fixing clamp for Distribution Box

Fixing LT Insulating connector for Distribution Box connection

Fixing of 11 KV Polymer Pin Insulator

Fixing of 11 KV Pin with Nut

Fixing of 11 KV Polymer Disc Insulator

Fixing of 11 KV Disc Fitting

Fixing of Stay

Fixing of 11 KV Fuse Set

Fixing of 11 KV TPMO

Providing & Fixing Copper L-Piece 62x225x12mm

Installation of 250 KV T/F. on Plinth

Dismantling, Shifting and Re-installation of T/F. & Tailless Unit

Complete chemical earthingof 11/0.4 KV, 250 KVA Distribution Transformer by digging pits 6” dia upto 3 mtr. deep including chemical filled pipe in between (pipe-in-pipe) ISI mark B Grade & connecting with G.I strip of size 50mm X 6mm with neutral/body of 11/0.4 KV distribution transformer to above pipe-in-pipe (PIP) and filling of chemical crystalline conductive mixture containing highly conductive material around the (pipe-in-pipe) up to 3 Mtr. including making of chamber at the top of the earthing. Other details are as below:- 1. Earth pipe material – mild steel, Galvanized. 2-Main Electrode diameter – 42.4mm. 3-Auxiliary Electrode pipe, Diameter – 76mm. 4-Wall Thickness of main Electrode: - 2.6mm. 5-Wall thickness of auxiliary hole: - 3.2mm. 6- Length of earthing electrode (PIP):- 3 Meter.

The Construction of new Plinth of Size 2X2X1.5 M = 6 Cumtr.

Mesh Fencing for T/F. h=1.82M x w=3.25m = 4xhxw = 23.56 Sqmm.

Interlocking inside T/F. (3.25x3.25-2x2 = 6.56Sqmm.)

Following material to be Received back to deptt. By dismnatling at site and carriage from work site to Store under the supervision of deptt. Engineer

(A) ST Pole 11 Mtr. Long Old (171 Kg per Pole)

(B) ACSR Dog Conductor Old & Used 720x0.334 = 240.748 Kg.

(C) MS Channel (100x50x5x2240 mm)

(D) 11 KV Cross arm

(E) Existing Line & Poles