258/EPD-III/BTPS/2019-20

1-1/4” Quick release coupling Male & Female (as per sample)

3/4” Quick release coupling Male & Female (as per sample)

3/4”-3/4” Male Adopter (as per sample)

3/4”-1-1/4” BSP Male Adopter (as per sample)

Gasket for stub shaft OD- 100 mm, ID- 50 MM, thickness- 5.00 mm, Material- Neoprene

Gasket for bearing housing for stub shaft, Material- Neoprene

Head End Shaft for SSC (As per sample)

Return trough idler shaft, (Drawing No.- 35161/X/0300/4) (As per sample)

Snub/idler shaft for SSC (Material-817 M40/EN-24) (As per sample)

Valve Plate R for A10VSO45DFR/31

Piston Shoe for A10VSO45DFR/31

Retainer Plate for A10VSO45DFR/31

Cylinder Block for A10VSO45DFR/31

Drive Shaft with 02 Nos. of bearing and washer for A10VSO45DFR/31

C.I. gate valve with wheel, pressure- 15 kg/cm2, size- 40 mm

C.I. gate valve with wheel, pressure- 15 kg/cm2, size- 100 mm

Oil Seal size- 28X40X7 mm, (double core)

Oil Seal size- 55X72X7 mm, (double core)

Oil Seal size- 15X35X7 mm

Latern Ring for C.G., SIZE- 169.4X131X20 mm, Material- Gun Metal

Support Ring size- 169.4X131X11.5, Material- Gun Metal

Gland Follower, OD- 160 mm, ID.D- 100 MM, Thickness- 6.0 mm, Material- Gun Metal

Thrust Washer for stub shaft, OD- 160 mm, ID- 100 mm, Thickness- 6.0 mm, Material- Gun Metal

Walker Seal style-I, with eye spring, size- 130X170X16 mm, Material- Neoprene

Walker Seal style-II, with eye spring, size- 130X170X16 mm, Material- Neoprene

Spacer Ring (as per sample)

Locking Collar (M.S.)

Collar Ring for C.G. with Grub Screw (as per sample)

Chuck Nut (M.S.) (as per sample)

Locking Washer (M.S.) (as per sample)

Bearing Bracket for C.G., Mark No. 35131/X/0050/13 (as per sample), Material- Cast Iron or as per sample

Blind Cover for C.G. as per sample, Material- Cast Iron

Open Cover for C.G. as per sample, Material- Cast Iron

Collar Ring for CA-50 Motor, Material- SS304 (as per sample)

Collar Ring for MA-141 Motor, Material- SS304 (as per sample)

Aluminium Viscous Filter, Size- 600X600X25 mm (as per sample)

Aluminium Viscous Filter, Size- 600X500X25 mm (as per sample)

Aluminium Viscous Filter, Size- 500X500X25 mm (as per sample)

Fabric Filter Size- 500X500X25 mm (as per sample)

PHG Belt B-77 (as per sample)

PHG Belt B-55 (as per sample)

Coupling Assembly running under Bell housing of HP-1 Pump (One set coupling includes two halves with Spidex, Allen key, grub screw etc. with finished bore and key way on both side. Specifications: Bore dia. Motor side 42.00 mm and Pump side bore dia.: 40.00 mm, Key way size: 11.5 x 4.00 mm, One hole of 8 mm with Allen screw on the middle section hub length (from inside) and at the 900 from key way. Material: Aluminium Alloy, Make: ROTEX KTR 48 ALU or Equivalent (as per sample)

Spidex for Above Coupling Assembly Make: ROTEX KTR 48 ALU or Equivalent (as per sample)

M/S INDIA TRADING COMPANY

M/S ANURAG ENGINNERING WORKS

SARVAMANGALAM ENTERPRISES