Construction of Museum_Cum_Seminar Hall_Platinum Jubilee Memorial Building_at Assembly House Premises Kolkata_ Supplying fitting and fixing Sofa Chair Table and Work Station

Amount

Supply ,Fitting & Fixing ofRectangular workstation of size - 1050W x 600D x 750H mm. Panel height of 1200mm and thickness of 52.4mm on the main spine and 25mm on the return side. The spine comprises of blocks comprising of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate or fabric on both sides. The panel structure made of aluminum extrusion having material AL96063-T6 & have average wall thickness of 1.2 mm & powder coated with epoxy-polyester powder. Top tile is split into Fabric tackable tile and split white board. The Fabric tackable tile shall be upholstered metal tiles in 0.6mm thick G.I. grade O as per IS: 277, with P.E. foam in the tile for tackablity. White board tiles shall be made of 8.0 mm thick particle board conforming to IS: 12823 laminated with 0.6mm thick white glossy high pressure laminate on outer side & 0.6mm backing laminate on inner surface and will be having all its edges with minimum 0.5 mm thick PVC edging. The intermediate blocks made from 18mm thick PLB battens which hold 3mm MDF in between. 6mm thick PE foam shall be pasted on 3mm thick MDF and this assembly shall be upholstered with approved shade of fabric on both sides using adhesive. Bottom tile is metal powder coated metal tiles in 0.8 mm thick M.S. CRCA Grade D as per IS: 513. Workstation panel of 52 mm thk (the spine panel) shall have provision of cutout for a 4 module on the block above worksurface and a 6 module electrical + 2 module data switch on the bottom block (below worksurface). The switch cutouts will be located below the fabric tackable split tile in the spine (52mm thk) panel. Work top shall be made of 25mm thick prelaminated particle board interior grade (As per IS: 12823). Bottom shall have a backing laminate of minimum 0.6mm thickness. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC Edge band glued with hotmelt EVA glue. Pedestal -Welded Assembled  0.8 thk CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener.  1.2 thk CRCA Top Stiffener & Bottom stiffener 10 lever Cam Lock & Central RH locking with actuator & lock channel mechanism for ‘Free Standing Full Height BoxBoxFile’ Pedestal. KBPT-Dimensions(tray) - 473 X 200 mm Weight - 3.2 Kg Material - CRCA steel Finish : Powder coated Thickness - 0.6 mm . CPU Trolley-Dimensions - * Adjustable Width (150 -225 mm) Weight - 1.5 Kg. Material - CRCA Steel, Finish : Powder Coating, Thickness -0.8 mm Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/1/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors. TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of DOUBLE SIDED WOOD & STEEL BOOK RACK as per following specification. Overall Dimensions of Double Sided Wood & Steel Book Rack Base Unit shall be 900mm(W)x590mm(D)x1890mm(H). Rigid Knockdown construction . Back panel up to the bottom of third rack for additional rigidity . Racks, Back panel & Skirting : CRCA 0.8 mm thickness . Side panels : 25 mm thick pre laminated particle board (PLB) with laminate on both sides . Stackability shall have add-on units width wise to form a bank of racks having common side panel . Bottom plus four fixed racks plus 10 storage levels. Each rack is provided with stiffener at bottom for strength . Uniformly distributed load capacity per each full shelf is 80 Kg maximum . Rack back stiffener shall be there at the rear side of the racks back stiffener s are provided . These are to support books on the rear side . Label Holder on each main unit to insert labels for identification . Finish shall be Epoxy polyester powder coated to the thickness of 50 microns . Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Upbeat CONFERENCE TABLE WITH CUBE LEG (2100W x 1200D x 750H mm) as per following specification. Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Conference module comes as single offering with all components including access flap power box and wire raiser. Wire tray with integrated power box made with a combination of 0.6 mm thk CRCA (IS: 513) outer body and 0.8 mm thk CRCA (IS: 513) switch plate (8+3 Anchor Roma) module cut out as standard. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Middle Main Desk with ERU of Dimension 1650W x 700D x 743H mm(Main Desk) & 1000W x 450D x 743H mm (ERU) as per following specification. Trident Middle Main Desk with ERU (RHS) size shall be 1650 Width x 700 Depth x 743 Height (Main Desk) 1000 Width X 450Depth X 743 Height (ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and savannah Maple PLT board shall be used. The Understructure shall be in pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage units with different combinations to support tops made with 18 mm PLT boards of different colours.Modesty and back panels made with 18 mm PLT boards. The pedestals / storages shall be fitted with necessary locks. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Chair without Neckrest as per following specification. seat/back assembly: the seat should be made up of 1.2 ± 0.1cm thk. hot pressed plywood ocp-qlta-pl14-18.the back should be made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn.seat size: 47.0 cm. (w) x 51.5 cm. (d) back size :45.0 cm. (w) x 65.3 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. armrests : the armrests have an up-down adjustment of 8.5 ± 0.5cm which should be provi ded in armrest structure. armrest top has an integrated layer of thermoplastic elastomer (tpe). lumbar support assembly: the lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. the height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. Front pivot synchro mechanism: the adjustable tilting mechanism should be designed with the following features. 360° revolving type. single point control. front-pivot for tilt with feet resting on ground ensuring more comfort. tilt tension adjustment. 4-position locking with anti-shock feature. seat/back tilting ratio of 1:2. pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. pedestal assembly: the pedestal should be injection moulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheel castors. the pedestal pitch-center dia should be ∅66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors).twin wheel castors: the twin wheel castors should be injection moulded in black nylon.SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D)BACK SIZE: 45.0 cm. (W) x 65.3 cm. (H) Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Visitor Chair as per following specification. seat assembly: the seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded polyurethane foam. seat size: 47.0 cm. (w) x 48.0 cm. (d)back assembly: the back asembly. should be made of powder coated (oft 40-60 microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. ms erw tube designed with contoured lumbar support for extra comfort. the back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. back size : 46.5 cm. (w) x 60.5cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.armrests: the one-piece armrests should be injection moulded from black co-polymer polypropylene. tubular frame: the powder coated (dft 40-60.microns) tubular frame should be cantilever type & made of ø2.54 ±0.03cm. x 0.2 ±0.016cm thick m.s.e.r.w. tube. Overall Dimensions of Chair. Seat Height - 46.5cm. Height - 93.5cm. Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of 3 Seater Sofa as per following specification. Overall Size : Width : 201cm Depth : 90cm Height : 80cm Seating Height : 46.5cmSeat & Body: Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termile proof as per IS:303] & pinewood are cross section [22x25, 22x40, 25x75 & 25x100mm] are without major knots & defects on the surface. 3mm MDF is stapled on the seat front bottom vertical surface to get the surface to stick the foam. Dia. 3.8mm zigzag spring asly. is mounted on the seat structure with spring mounting plastic bracket for support & additional cushioning purpose. Elastic belt of 2" width are used above the spring asly. to give good sagging effect. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid the tearing of seat foam with the surface contact of metal spring. Back vertical surface is stapled with non-woven cloth to get surface to stick the foam. Complete understructure is made by gluing & stapling. Foam: Seat is made of PU foam with density 28 kg/m3 having an additional top layer of supersoft PU foam with density 18 kg/m3. Recron sheet of 230GSM is used above this foam. Seat front bottom vertical surface & back vertical surface is glued with the PU foam with density 22 kg/m3. Side vertical surface, body front taper vertical & top horizontal surface is glued with PU foam with density 16 kg/m3. Upholstry: Seat & body upholstry is made in the dual tone colour with fabric / fabric option & fabric / leatherite option. Back Top Cushion:· Understructure: Understructure is made of combination 12±1mm & 6±1mm thk. Foam: It is made with supersoft PU foam with density 18 kg/m3.Upholstry: It is upholstred with fabric. These back top cushions are fitted with the seat & body structure with the chipboard screws. Qty. of back top cushion fitted with each .Packet: One packet per Qty. 1No. of each SKU. Each SKU is packed in the seperate packet. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of 1 Seater Sofa as per following specification. 1 seater:Overall Size : Width : 100cm Depth : 99cm Height : 98cm Seating Height : 47cm LEATHER/PVC/FABRIC:pu,pvc , FRAME MATERIAL:wood,foam,pu,pvc,sofa spring,flexible belt,pocket spring . SEAT FOAM: (DENSITY, TYPE):35#hard , BACK FOAM: (DENSITY, TYPE):35#soft. LEG MATERIAL:wood 3 seater:Overall Size : Width : 203cm Depth : 99cm Height : 98cm Seating Height : 47cm LEATHER/PVC/FABRIC:pu,pvc , FRAME MATERIAL:wood,foam,pu,pvc,sofa spring,flexible belt,pocket spring . SEAT FOAM: (DENSITY, TYPE):35#hard , BACK FOAM: (DENSITY, TYPE):35#soft. LEG MATERIAL:wood Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Broadway Ottoman as per following specification. Overall Size : Width : 64cm Depth : 88cm Height : 46.5cmLeg Height : 23cmBody:Understructure: Understructure is made from the assembly of top body asly. & bottom body asly. Top body as,ly. is made of combination of 12+1mm thk plywood [moisture resistance & termite proof as per IS:303] & pinewood is of cross section 22x25mm is without major knots & defects on the surface. Cardboard is stapled on the outer vertical surface to get the surface to stick the foam. Bottom body asly. is made of combination of 12+1mm thk. plywood [moisture resistance & termite proof as per IS:303] & pinewood is of cross section [22x40, 22X100]mrn is without major knots & defects on the surface. Complete understructure is made by gluing & stapling.Top lid: Top lid is made of 12+1mm thk. plywood [moisture resistance & termite proof as per IS:303j.Foam: Foaming is done on the outer surface of top body & bottom body from PU foam. Top body asly. is sticked with the 2 layers of supersoft PU foam with density 32 kg/m3 & bottom body asly. is sticked with the PU foam with density 28 kg/m3.Upholstry: Top body asly., bottom body asly & top lid is upholstred seperately in the dual tone colour with fabric / leatherite option. Top body asly. is upholstred with the polyester plain fabric. Bottom body asly. & top lid is uphlstred with the leatherite. top lid is stapled with the leatherite hook for opening & closing of top lid.Top body asly. & bottom body asly. is fitted to each other by chipboard screws. Top lid is fitted to the top body asly. with the MS chrome plated door hinge & chipboard screws.Legs: Plastic PP moulded legs are used & fitted at the bottom surface with the chipboard screws. Before fixing legs, non-woven fabric is stapled on the bottom surface to cover the structure.Packet: One packet per Qty. 1No. of each SKU. Each packet contained assembled ottoman & hardware packet. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Corner Table as per following specification. Primary Material-Tempered Glass, Finish Color-Black Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Upbeat SQUARE TABLE WITH CORNER RADIUS SWING LEG (1050W x 1050) as per following specification. Meeting tables comes as single offering with all components including access flap, power box and wire raiser. Meeting tables are offered only with Inset type of Legs. Legs are connected directly to cross members (no. legs lateral member provided). Square table with radius (R 150 mm) available in size - side 1050 mm. Dual power box, raiser is used along with access flap for wire management of Square tables. Cross members in the Upbeat system are made from 50 mm x 25 mm x 1.2mm thk (as per IS: 7138 ERW). Cross members are assembled by friction fit PDC joinery and Grub screws. All cross members are mounted at a distance of 165 mm from worktop sides. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of 2 Seater Sofa as per following specification. seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood ocp-qlta-pl14-18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.Width (W): 146.0 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of 3 Seater Sofa as per following specification. seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood ocp-qlta-pl14-18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.Width (W): 205.5 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Auditorium Chair as per following specification. 1) SEAT / BACK: The seat sub-assembly is made up of 1.2±0.1cm Thk Plywood, upholstered with polyester fabric over moulded foam and covered with an injection-moulded polypropylene outer cover. The seat can be manually tipped-up when not in use. The back sub-assembly is made up of injection-moulded gass filled polypropylene inner upholstered with polyester fabric over moulded foam and covered with an injection-moulded polypropylene outer cover. Both these sub assemblies are fixed to the tubular structure. BACK SIZE: 46.3cm (W) X 59.0cm (H). SEAT SIZE: 47.0cm (W) X 49.5cm (D). TUBULAR FRAME STRUCTURE (I FRAME): The understructure is made of two straight I-leg of Ø3.81±0.03cm x 0.2 ±0.016cm THK M.S.E.R.W round tube and is fixed with the seat support assembly using M8x15 INT. SOC HD M/C Screw QTY-2 NOS on each side. The seat support assembly is made of a straight and bent tube of Ø2.22±0.03cm x 0.25 ±0.016cm THK M.S.E.R.W round tube with 5mm thk mounts at both ends. The Seat assembly is pivoted on this assembly. The Back assembly is mounted on a 3.15mm thick Armrest bracket. The I Frame Structure is grouted using 4 Anchor Bolts on a 5mm thick bottom plate which is welded to the upper frame structure . The Anchor Bolts are covered using 2 PP Foundation Bolt Cover which are fitted together on each leg.The I frame is used for straight layout typically. 3) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 ±2 kg/m³ and Hardness load for Seat 16 ± 2 kgf and Hardness load for back 14 ± 2 kgf as per IS:7888 for 25% compression. 4) ARMRESTS: The armrest is made of Injection moulded PP compound.The Armrest is mounted on a 3.15mm thick HR sheet which is welded on the tubular frame. 5) DESKLET (Optional SKU): The desklet assembly is flip-up type and is supported by a welded assembly of extension tube and a bent support tube of 1.9 ±0.02cm dia x 0.2 ±0.016cm Thk M.S.E.R.W. tube. The PLT desklet top is PP edge moulded. Rubber Bangers are installed to prevent banging and scratch in the bottom part of desklet. The desklet can be adjusted by 50 mm in depth as per comfort and reach requirement. 6) POWDER COATING: Steel components are epoxy polyester powder coated (DFT 40-60 microns). Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Visitor Chair with Arms as per following specification. seat/back assembly:the seat/back shall be made up of 1.2 ±0.1cm thick hot pressed plywood and upholstered with fabric and moulded polyurethane foam together with moulded seat and back covers. the back foam shall be designed with contoured lumbar support for extra comfort. the dimensions of back shall be-(w)50.0 cm x (h)49.0 cm and of seat shall be-50.0 cm (w) x 46.5cm. (d).high resilience(hr) polyurethane foam:the hr polyurethane foamshall be moulded with density 45±2kg/m3-and hardness load 16 ±2 kgf for 25% compression. seat/back covers:the seat cover shall be injection moulded in black co-polymer polypropylene and back cover should be vacuum formed from abs sheets.armrests:the one-piece armrests shall be made of black integral skin polyurethane with 50-70 shore 'a' hardness and reinforced with m.s. insert. the armrests shall be scratch and weather resistant tant. the armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ±0.05-cm. thick hr steel. .tubular understructure: the tubular frame shall be cantilever type & made of 0 2.54±0.03cm x 0.2 ±0.016cm.thk m.s. e.r.w tube and black powder coated (dft 40-60 microns).Overall Dimensions of Chair-Seat Height -45.0cm. Height -81.5cm.Width & Depth of Chair as measured from pedestal - Width-59.0 cm and Depth-63.0 cm. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Chair as per following specification. SEAT/BACK ASSEMBLY: The seat is made up of 1.2 +0 1cm thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam The back is made up 1.2 TO 1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam The back ply and foam is designed with contoured lumber support for comfortable seating posture. MID BACK SIZE 48.5 cm (W) X 64.5 cm (H). SEAT SIZE 51.0 cm (W) X 48.0 cm (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m* and Hardness load 16 2 kgf as per IS 7888 for 25% compression. ARMRESTS (ADJUSTABLE):The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of B3 81z0 03 cm x 0 2-LO 01 cm thk M S E R W tube having chrome plated finish The armrest height adjustable up to 6 5z0 Scm in 5 steps. KNEE TILT SYNCHRO MECHANISM WITH SEAT DEPTH ADJUSTMENT : 360° revolving type Single point control, Single point control, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4-position locking with anti-shock feature Seat back tilting ratio of 1.2, Seat depth adjustment of 6.0 +0 Scm can be locked in 6 positions FRONT PIVOT SYNCHRO MECHANISM: The mechanism is designed with the following features 360° revolving type Single point control Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment 4-position locking with anti-shock feature knockdown condition vacations within +1 0 cm ADJUSTABLE BACKREST: The back rest is connected to the mechanism with a drop-iift mechanism which can be adjusted in the range of 7.0 IO.5cm. and locked in 5 positions for the better lumbar support. FIXED SPINE (COFERENCE/ VISITOR): The seat and back are arrested together with fixed type spine i.e no back up/down adjustment; made of 0.8 TO.05 cm thk HR Steel and is black powder-coated ( DFT 40-60 microns ) HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 10.010.3 cm. PEDESTAL ASSEMBLY : The pedestal is fabricated from 0.2 0.02 cm thick HR sheet, chrome plated and assémbled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.010.Scm. Pitch-center dia. (76.011.0 cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in black Nylon. Mid Back (W)76.*(D)76*(H)93.4-110.4 (SH)47.5-57.5 cm Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Visitor Chair as per following specification. . The seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. the back foam should be designed with contoured lumber support for extra comfort. the chair should be available in three models: back size: 53.0cm.(w) x 73.0cm.(h) seat size: 54.6cm.(w) x 49.0cm.(d) the hr polyurethane foam should be moulded with density = 45 ±2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the fixed type mechanism should be made with a 0.8 ±0.05 cm thk hr steel spine welded to it and black powder-coated ( dft 40-60 microns ).the understructure should be made up of m.s.e.r.w. elliptical tube of size 4.5 ± 0.03cm x 1.9 ± 0.02cm x 0.25 ± 0.025cm welded to m.s.e.r.w tube of ∅ 1.6 ± 0.02cm x 0.2 ± 0.016cm thk. the understructure should be powder coated ( dft 40-60 microns ) in silver metallic gray.Overall Dimensions of Chair, Seat Height -46.5cm. Height -89.5cm. Width & Depth of Chair as measured from pedestal - Width 59 cm and Depth 68.5 cm of Chair as measured from pedestal - Width-59.0 cm and Depth-63.0 cm. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Visitor Chair as per following specification. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 44.0 cm. (/1/) x 56.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. VISITOR FRAME ASSEMBLY :- The powder coated (DFT 40-60 micron) tubular frame is cantilever type and made of dia 2.54 +/- 0.03 cm X 0.3 +/- 0.016cm thk MS ERW tube. Shoes are made of glass filled Poly amide and fixed to the tubular frame Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Work Table as per following specification. Work - 4020 size shall be 1200 Width x 600 Depth x 740 Height . The top shall be made from 25 mm thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge band all around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key . Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Chair as per following specification. seat/back assembly: the seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured and back should be injection moulded from black co-polymer polypropylene upholstered with fabric and moulded polyurethane foam together withseat and back covers. the back foam should be designed with contoured lumbar support for extra comfort.seat size: 45.0cm(w) x 42.0cm.(d) back size: 39.0cm(w) x 38.0cm.(h)seat i back covers: the seat and back covers should be injection moulded in black co-polymer polypropylene. high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. armrest assembly (for 7044t): the armrests should be made of black integral skin polyurethane wtih 50-70 shore 'a' hardness and reinforced with m.s. insert. the p.u. armrests should be then fixed to black powder-coated ( oft 40-60 microns ) armrest brackets made of of 0.5 ± 0.05 cm. thk. hr steel and fitted with claddings made of injection moulded polypropylene. fixed type mechanism: the fixed type mechanism should be without back tilt. tubular frame: the tubular frame should be made up of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. e.r.w. tube and black powder coated ( dft 40-60 microns .Overall Dimensions of Chair:Seat Height -49.5cm. Height -88.5cm. Width & Depth of Chair as measured from pedestal - Width-56.0 cm and Depth-54.0 cm. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of AYUSH PLUS LITE SEMI FOWLER BED WITH CASTORS WITH REMOVABLE HEAD / FOOT BOARD IN PP as per following specification. Dimension: Overall dimension: (L) 2145 mm x (W) 990 mm x (H) 560mm.Function: Single function bed with adjustable backrest 70deg. Head board & foot board: Made of PP (Polypropelen).Bed frame: bed frame should be made of MS ERW rectangular section longitunal tube of size 30mmx60mm of 1.6mm thick. It should have provision 4 iv pole holders . It is strengthned by rectangular cross tube section of size 60mmx40 mm having 1.6 mm thickness. It is further strengthen by 25.4 mm sq tube with 1.2 mm thickness. Leg Under Structure ERW round tubes should be used with thickness of 1.2mm with section 31.75 mm. Lying surface: Lying surface should be made of CRCA sheet of thickness of 1mm thick . This lying surface should have 4 sections for bed profiling i.e. back adjustment, fixed pelvic section, upper and lower leg adjustment. Lower leg rest section is provided with Ratchet for leg rest adjustment. Mattress platform is strengthned by tubular frame of size 25.4mm dia x 1.2mm thickness. It should be strengthned by trapizodal contour ( rounded corner ) 14 nos, embossed cut out. All metal components should be pre treated with zinc phosphating and then powder coated with anti microbial epoxy polyster powder coating. Mechanism: All functions should be operated with lead screw mechanism, ACME threaded EN8 made 6mm pitch for easy in movment Castors High endurance, plastic injection molded castors of 125mm dia having provision for diagonal locking with stem dia 22mm should be provided for better stability. Powder coating. Anti rust, thermosetting epoxy polyester powder coating should be used. All powder coating should be in Ral White. Certifications: The manufacturer should compilant with ISO 9001, 14001, OHSAS 1800, ISO 13485:2016, USFDA and CE certification. Maximum weight Maximum safe working load must be 135 kg. Handle All the functions should operated with the help of single ergonomically dedicated handles, which are made of metal inserted PP co polymer , it's lever should be snap locked when not in use. All the handles should be provided operating guidence stickers welding. To ensure qood quality welding " Co2 Argon" process should be adhered to. Powder coating: All metal components should be pre treated with zinc phosphating in 9 tank porcess and then powder coated with epoxy polyster powder coating . packing Goods should be supplied in knocked down construction to reduce carbon emission. In house test treport: proof loading test , cycle tests , impact test, horizontal & vertical load tests for side rails, salt spray test, castor break test, pull test for head and foot board. Certifications: The manufacturer should compilant with ISO 9001, 14001, OHSAS 1800, ISO 13485:2016, USFDA and CE certification Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of 2 SECTION MATTRESS 100 mm as per following specification. Dimension:- (L)1965*(W)830*(H)100 mm. The bed should be provided with 40 density 100 mm thick PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of SS STAND 5 CASTORS as per following specification. Infusion Pole can be mounted on all beds and is provided with telescopic IV pole. Overall dimension: Hook arm PCD dia 366mm x adjustable height from 1007 mm to 1300mm. The Infusion pole has 2hooks to hand the pumps and salineble. The zip & stiches for the mattress cover should be concealed. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Medicine Trolley as per following specification. Overall dimension: - 902(L) X 532(B) X 915(H) mm. Top shelf & bottom shelf should be made of SS304 sheet with 1mm thickness & 1.2mm. Rest of the components like supporting legs, horizontal bar handle should be made of SS 304 pipe having dia 31.8, 12.7 mm respectively. The castors of high quality plastic injected molded & anti static having the dia of 125mm should be used.Handles made of SS 304 pipe having section of 16mm & thickness of 1.2mm should be used. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of WALL CABINET 600W-320D-674H 2S as per following specification.WELDED OVER HEAD STORAGE CABINETS. Over head cabinets are to be Pure epoxy powder coated with thickness of 40-60 microns and should be fixed on the wall. The cabinet should have a corrosion resistance magnetic strip as shutter catch, shutters are to be equipped with 180 degree cam lock. PP constructed semi recessed handle to be screw fitted to the shutters. Hinges are to be of SS-304 knuckle overlay type with 270 degree opening and 2 nos of hinges are to be screw fitted to each shutter and cabinet. Approved make : Godrej or similar make.

Supply ,Fitting & Fixing of Table as per following specification.Insight 1800 W size shall be 1800 Width mm x 900 Depth mm x 740 Height mm . The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top . The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube . Approved make : Godrej or similar make.

WELL DECOR

Decor 9