REPAIRS TO TOILETS AT CERTAIN IN LIVING BLOCKS AND CLEANING OF OVERHEAD RESERVOIR TANKS AND UNDERGROUND SUMP AT INS SHIVAJI

Amount

Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing), removing serviceble tiles to store and rubbish off the premises complte all as specified.

Demolition of stone slabs and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortor complete all as specified.

Demolition of cement concrete (unreinforced) in sunken floors and in any description

Dismantling of existing water proofing treatment treatment consisting of cement mortar,tarfelt and foreign materials etc incl cleaning the surface and removal of dismantled materials outside MD land all as directed and specified.

Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6

M&l for Glazed ceramic tiles of any colour in vertical surfaces 300 x 600x 8mm thick mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4

M&L for 20mm thick Makrana white marble tiles machine cut in urinal partition and jointed with grey cement slurry including cutting and polishing and pointing in white cement (1:2) match with marble shade complete.

M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed.

M&L for machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete

M&L for applying 2mm thick heavy duty acrylic polymer modified cementitios water proofing coating of Nitocote CM 210 (Make : Fosroc/Dr Fixit including cleaning, repair of all cracks complete all as specified and directed.

M&L for 40mm thickness screed concrete (1:1.5:3) inside sunken slab laid to slope (using 12mm graded aggregate) finished, curing including checking the joints of pipe lines and rectifying any defects within sunken portions, cleaning the surface with air and water jet and also providing 40mm thick PVC spouts 45cm long in external wall all as specified and directed..

M&L for 15mm thick plastering over the newly laid screed concrete and side walls of sunken portion in CM 1:3 mixed with polypropylene fibres (Micron-B) of approved quality @ of 125 gms per bag of cement or as per manufacturers specification alongwith water proofing compound of approved quality @ 1kg per bag of cement including rounding of all corners wherever required, smooth, rendering, curing etc complete all as specified and directed.

M&L for PCC lean concrete 1:5:10 type E2 laid in layers of not more than 10cm thick tamping etc complete complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as padding concrete over lean concrete all as specified and as directed

M&L for Brickwork with Modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, for- ming toothing for, and bonding new into old brickwork /stone masonry

M&L for 5mm thick rendering in cement mortar 1:3 on ceiling finished even and smooth without using extra cement all as specified and directed.

M&L for Rendering 15 mm thick CM 1:6 on fair faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement)

M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick work/concrete surfaces finished even and smooth with WPC all as specified and as directed (Note : WPC will be measured and paid separately)

Supply Integral Water Proofing Compound

M&L for preparation of new plastered surface of ceiling surface and applying three coats of white wash etc all as specified and directed.

M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty

M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of antifungal weather proof paint exterior grade emulsion paint complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper complete all as specified and as directed.

Dismantling of cast iron/PVC or reinforced concrete drain pipes, jointed in cement mortor anf taking out of trenches if required 100/75 mm internal dia pipe complete all as specified.

S&F PVC (SWR) pipes of dia 110mm bore single socketed in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipe of 75 mm bore in single socketed in any length with rubber ring joints fixed to walls..

S&F PVC (SWR) bends of 110 mm dia bore with access door

S&F PVC (SWR) bends of 110 mm dia bore

S&F PVC(SWR) vent cowl of 110mm dia bore.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal for 110 mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110 mm dia

S&F PVC (SWR) bends of 75mm dia bore with access door

S&F PVC (SWR) branch piece, single (double Y) equal or unequal 75 mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm dia

M & L PVC Nahani trap100mm size with grating including jointing to waste pipe fixed in cement concrete type type B1 (1:2:4)

S&F PVC Bottle trap having minimum water seal of 25mm (Minimum weight 32mm-260gms/40mm-270 gms) of 32 mm dia, complete all as specified and as directed.

S & F in repairs Wash basin wall hung with half pedestal 550x400 mm as per CERA -CAT No. S2040105 wash basin and Cat No S2090102 Half pedestal complete all as specified

S&F in repairs two piece EWC 680x360x765mm white, with seat cover and Twin flushing cistern complete all as specified and directed by Engr-in-Charge as per CERA -CAT No. S1021103 S Trap 230mm, CAT No S1060101 Cistern, CAT No B1510101 seat cover, CAT No B1810101 Twin Flush fittings all as specified

Vitreous China urinal, coloured of size 420x395x635mm large flat back with all fittings including spreader, CP connection suitable for 15mm bore stop valve, discharge pipe and taking down the existing one. Make Cera – CAT Nio.S4020102 and urinal Spreader Cera – CAT No.F8070201

S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, fancy type chromium plated ,screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs Make Cera – Cat No. F2006101 or Equivalent

S&F Bib taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe fixed in repairs Make Cera – Cat No. F2006151 or Equivalent

S&F Stop valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed in repairs

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F Brass chromium plated overhead shower rose 120 mm dia with 3 flow with swivel joint, including shower arm, fixing to steel pipe or union including taking down old shower rose complete all as directed and specified by Engr- in- Charge. Make Cera shower rose F7020305 shower arm F7040104 or equivalent in Hindware/ Parryware.all as specified and directed

CP hand Health faucet of brass body with wall hook and 1mtr stainless steel braided rubber hose pipe fixed in repair complete all as specified and as directed.Make: Cera Cat No F8030102 or equivalent in Hindware / Parryware.

S&F Stainless steel soap dish, white of size 160X160X90 mm as approved fixed with brass screws or embedded in wall . Make : Cera Cat No. F5003106 or equivalent in other makes as specified

Towel rail brass chromium plated fancy type 60cm long including bracket fixed between flanges complete Make: Cera Cat No. F5007103 or equivalent in Hindware/ Parryware

S&F Salt glazed stone ware gully traps square or round mouthed type 150 mm x 150 mm. type 'P'

Taking up or down steel tubing 15 mm and connection, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 25mm and connection, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 40 mm and connection, including cleaning for refixing or removal to store complete all as specified.

S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

S&F CPVC pipes, SDR 11, 40 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

S&F in repairs High density polythylene (HDPE) pipes 50 mm dia, of pressure rating 6 Kg/sq cm, fixed to walls, ceilings or in floors complete all as specified and as directed.

Dismantling PVC water tanks capacity Exc 1000 & n exc 2000 and removing to store

S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) 2000 ltrs capacity hoisted and fixed in position all as specified

S&F ball or float valve 25 mm brass high pressure with polythene float and fly nut etc complete fixed in repairs.

Cement concrete type C-2, 1:3:6 (40 mm graded aggregate 75 mm thick as as in plinth protection complete all as specified.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqcm with shutter (without taking of shutter from the frame.

Taking down chowkats or frames N.exc 1.5 Sqm with shutter (without taking of shutter from the frame.

S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified

S & F 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, with commercial face veneers.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100mm butt hinges, stainless steel medium weight fixed with stainless steel screws.

S&F aluminium handles cast type anodised 125mm size.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 250mm length.

Cutting holes in brick wall or stone walls built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 or cement concrete (1:2:4), type B1 as requried for depth of embedded portion of hold fasts or lugs measured from the face of the Jamb into the wall exc half brick & N.exc one brick all as specified and as directed.

S&F Bands, straps, ; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165

M&L for preparation of new or previously untreated wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer

M&L for Machine cut green marble slab, 18-20mm thick, single piece in full length of window cill/jamb over and including cement mortar screed/backing coat, 15 mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Taking down Aluminium windows/ ventilators of any size or any description

S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron. (ii) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

M&L for powder coated aluminium two track, two shutters (of equal width), sliding type windows without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings (two No's for each sliding shutters) & 4.00mm thick plain glass for glazing with & including following powder coated sections as given in 'JINDAL' catalogue complete all as specified and as directed :- (i) Frame (Bottom)-20956 (ii) Frame (Top & Side)-20966 (iii) Shutter vertical (Handle lock)-20846.(iv) Shutter vertical (Int lock)-20845.(v) Shutter (Top)-20844.(vi) Shutter (Bottom)-20847. Note :- (i) The window opening shall be provided with two shutters of equal width. (ii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window. (iii) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (iv) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

S&F Cast iron work grade FG 150, unmachineed, in brackets, gully traps, gratings, railings, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 kg each

Preparing new steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide

Taking down GI tubing hot water supply of any dia including all fittings and fixtures carefully without any damages to pipe pline and fixed the same in position after tiling work has been complete.

M&L for cleaning of RCC Water tank at any height by removing all scale, dirt, mud ,any foreign material, accumulated silt, other dirty substance,algae, fungus and other bacterial material from sides/bottom of tank by draining / pumping out water/sludge and other growth from wall / floor / roof by high pressure cleaning method with jet set, vaccum machine and again cleaning the tank with fresh water. and disinfecting the tank by using UV radiator and approved chemical (chloriten) for RCC water tank of capacity exc 200000 Lit but not exc 300000 litres complete all as specified and as directed. Note:- (i) Unit rate quoted shall include for necessary ladder and machinery for pressure cleaning and safety apparatus required for execution of work. (ii) Unit rate quoted shall include for writing the date of actual cleaning with white paint on black background to match with the existing.

M&L for cleaning of Under Ground/ above ground sump by removing all scale, dirt, mud ,any foreign material, accumulated silt, other dirty substance,algae, fungus and other bacterial material from sides/bottom of tank by draining / pumping out water/sludge and other growth from wall / floor / roof by high pressure cleaning method with jet set, vaccum machine and again cleaning the tank with fresh water. and disinfecting the tank by using UV radiator and approved chemical (chloriten) for water tank of capacity exc 150000 Litre but not exc 250000 litres complete all as specified and as directed. Note:- (i) Unit rate quoted shall include for necessary ladder and machinery for pressure cleaning and safety apparatus required for execution of work. (ii) Unit rate quoted shall include for writing the date of actual cleaning with white paint on black background to match with the existing.

RK AND SONS CREATION