SPL REPAIRS TO OR MD ACCN BLDG NO P-92/01 TO 06 (SHO LINES) AT NAMKUM POCKET OF RANCHI MIL STN

Amount

geran

Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6,using old size bricks all as specified.

M&L rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed.

15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

5mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement.

Supply only liquie water proofing compound as per manufacture instruction.

M & L preparation of newly plastered surfaces of walls/chajja/lintel and applying two coats of exterior acrylic emulsion paint (Apex or equivalent in berger. johnson paint white or tinted) over a coat of alkali resistant primer complete as specified and directed.

Materials & labour for prepration of newely plastered surfacea nd finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as directed

M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion complete all as directed

M&L for complete removal of existing surface of walls of any description by washing, rubbing down and applying two coats of acrlic emulsion weather coat paint over a coat of alkali resistant primer, complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified.

Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore.

Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe all as specifed.

Demolition of cement concrete unreinforced in floors , roof and pavings n. exc 15 cm thickness (below or above ground level).

Dismantling brick tiles or terracing tiles /roof covering materialsingle layer on roofs complete all as specified

Scarpping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as directed.

M&L for 10 mm thick plaster in cement mortor 1:3 laid over roof with integral water proofing admixture @ 200 ml per 50 kgs of cement (after the cement is cured the roof will be testd for water tightness by ponding with water for seven days of any seepage/leakage etc.) Note :- supply only water proofing compound shall be measured and paid separately.

M&L Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non woven polyester reinforced (wt not less than 150 grams) over applying one coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed.

M&L for two coats of bituminous based aluminum paint on APP membrane all as specified and directed.

M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 for fixing tiles. (Note :- Screed bed shall be mixed with water proofing compound as specified and directed and shall be measured and paid separately)

M&L for 20 mm thick machine cut & polished cement concrete tiles factory made with grey cement without pigment of size 250mm x 250 mm laid in neat cement slurry over screed bed and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of Dr Fixit or tile glue or as per manufacturer instructions complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof kerbs, benches and water troughs etc. including necessary moulding complete all as specified & directed.

M&L Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) set in CM 1:6 in window or door cills, lintels,bressumers, steps, quoin blocks (for use with masonry), copings, kneelers, apex stones,, columns, posts, with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match.

M & L cement concrete Type B0 1:2:4 in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed

Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame)

Taking down chowkats or frame with shutters (without taking off shutters from the frames) but Exc 1.5 and n. Exc 4 Sqm each

Taking down shutters of any description n exc 1.00 Sqm each complete.

Taking down shutters of any description exc 1.00 and n . Exc 2 Sqm each complete.

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

S & F Anodised aluminium window and ventilator shutters, side hung type or two or three track type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.if use sliding tack provide all locking arrangement,rubber beading,cleat incl all fitting and fixture complete.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane.

S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples in repairs.

S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixede in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing .

M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete.

Supply & fix second class hard wood 35m thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed .

Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S&F block boards 18/19mm thick gde 2 quality, interior grade, commercial type for cupboard shutter, shelf, etc complete

S&F 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination incl teak wood liping 6mm thick on sides complete all as specified and directed.

M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified.

M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long.

S&F Aluminium anodised handles of extruded section and fixed 150 mm long.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F 100 mm Stainless steel butt hinges, with stainless steel hinge pin,complete all as specified and directed

S & F Magnet catcher with nuts and screw of mild steel bright finish all as specified and directed

S & F mild steel Drawer handle projection drop 50 mm to 65 mm on screw plate complete

S & F Magic Eyes for doors complete

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

S&F Mild Steel 150mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete.

S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm

S&F Continious (piano) hinges, mild steel, bright finish or elecrogalvenised, 30 mm width of flaps(when open) .

M&L preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of pink primer

M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as directed.

M&L for preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed.

S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed.

Roughing surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc.

M&L brushing neat cement slurry with 3 Kg of cement per sqm . complete all as specified and directed.

M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, edgeless , area of each tile exc 600 x 600 mm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.

Description all as per Item No 71 but as in Skirting with 10mm thick rendering in CM 1:3

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete

Description all as per Item No 73 but as in Skirting with 10mm thick rendering in CM 1:3

M&L for 450x350x7mm thick glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.

M&L for 20 mm thick granite (of any type), as in cooking plateform etc set in CM 1:4 and grinding and polishing and rounding / moulding the edges complete.

Disconnecting existing tanks setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position complete all as directed.

Dismantling water tanks capacity exc 250 ltrs & n exc 500 ltrs and removing from site complete all as specified and directed.

Dismantling water tanks capacity exc 500 ltrs & n exc 1000 ltrs and removing from site complete all as specified and directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for

Supply and fixing three layer PVC tank of 500 ltr capacity including Supplied and fixed 20mm dia brass float valve assembly complete all as specified and directed.

Rotational moulded polythene water storage tanks, triple layered (Cylindrical vertical with closed top) of capacity 1000 lit, hoisted and fixed in position as in repair complete all as specified.

S& F Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs, complete all as specified and directed.

M & L for repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area exc 0.05 sqm but n exc 0.10 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately)

All as per ser item No 84 above herein before but exposed area exc 0.10 Sqm but not exc 0.16 Sqm

M&L for repair and rendering 10mm thick in cm 1 :3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed .

Mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required, incl cranking bending spirally for hooping for columns and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips.

M&L for mild steel 6 - 8mm dia TMT bars bent to shape required, including cranking, bending and binding with mild steel annealed wire not less than 0.9mm dia complete all as specified and directed.

S&F of white/colour PVC Cabinet Mirror of Size 350 mm X450 mm of approved make

S & F Viterous china wash basin, white, flat back, of size 550x400mm with CP waste coupling, and PVC waste pipe and including fixing brackets, complete fixed as in repairs suitable for pipe of bore 15mm.

S&F PVC waste pipe 32 mm dia and 900 mm long for WHB and Kitchen sink.

S & F Brass chromium plated tubular towel rail, 20mm dia, D Type, and 600mm long with brackets fixed complete with brass chromium plated screws.

S&F in repair Soap dish, chromium plated with fittings complete all as specified & directed by Engr.in.charge.

S & F Chromium plated mixture cock for wash hand basin for hot and cold water of copper alloy with long shank inlets suitable for 15mm bore connections complete all as specified and directed. Make - JAQUAR or equivalent as approved by GE.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed

S & F 15 mm bore chromium plated nozzel for RO connection complete

Supply and fixing in repairs Brass CP mixer for basin mixing for hot and cold water screwed down for iron pipe of 15 mm bore, complete all as specified and directed

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete.

Supply and fixing in repair PVC valveless syphonic action low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc. complete all as specified and directed.

S&F in repair Stainless steel sink with drainage board made out of 1 mm thick stainless steel sheet 1 mm thick, kitchen type, with plug,washer and waste, incl fixing with cantilver brackets and connecting union to pipe over all size 915x460mm, bowl size 410x 330 x 160mm. all as specified.

S&F in repairs shower rose brass cromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 6" long made to shape comptete.

Mild steel Powder coated pipes 32 mm dia with wall thickness 16 gauge, with fixing brackets stops, roller etc. in curtain rods fixed in repairs complete all as specified and directed.

S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete

450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality

S&F in repairs 15mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions.

S & F Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in repair complete all as specified

Hard core of broken bricks of gauge n exc 63mm, deposited, spread, leveled in layers n exc 15cm thick each layer including watering and well ramming to a true surface.

75mm thick, PCC 1:3:6, type C-1 using 20 mm graded stone aggregate, as in plinth protection finished even & smooth without using extra cement complete all as specified and directed .

Demolition of cement concrete of any description and in any position and removing the rubbish from the work site.

Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(IWPC will be paid separately)

PCC 1:7:12 type using 40 to 60 mm thick brick aggregate as in filling of sunken portion completed all as specified.

25mm thick PCC 1:2:4 type B0 using12.5 mm graded stone aggregate as in sunken floor complete as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate with WPC as in sunken portion and making adequate slope toward spout pipe complete all as specified and as directed. NOTE: - Water Proofing Compound shall be measured and paid separately

M&L for rendering 15 mm thick on concrete or brick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement.Note - WPC will be measured and paid separtely

M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat over plaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed

M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.

M&L for PCC (1:5:10) Type E-2 using 40mm graded brick aggregate as in sunken portion complete all as specified and directed.

Demolition and breaking of drain pipes of 110/75mm size etc complete all as specified & directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75 mm dia

S&F PVC (SWR) bends/shoes any radius of 110mm dia

S&F PVC (SWR) bends any radius provided with access door of 110mm dia

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia

S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 110mm bore with access door

M&L PVC(SWR) Tee of radius 110mm dia.

S & F PVC(SWR) vent cowel of 110mm dia.

S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 75 mm bore with access door

S&F 75 mm bore PVC floor trap with 75mm dia grating including jointing to waste pipe, all as specified

M&L PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall with and including stack and clamp.

M&L PVC (SWR) bend of radius 75mm dia.

S & F in repair Brass chromium plated wall mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality all as specified and directed.

S&F in repair waste coupling of PTMT (half or full threaded) for 32mm dia complete all as specified and directed.

S&F in repair PTMT grating doom 100mm dia.

Post construction treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors

Post construction along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

Post construction at points of contact of wood work by chemical emulsion (in oil or kerosene based solution)@ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same

Material & labour for chequered cement concrete tiles 20cmx20cmx20-25mm thick set, jointed and pointed in neat cement slurry in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified & directed.

Material & labour for pre-cast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slabs, set in CM 1:6 including necessary form work and finishing to exposed surfaces complete all as specified and directed.

Demolition and breaking of SGSW or RCC drain/Soil pipes jointed in cement mortar and taking out from trenches if required internal diameter 150mm.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

M & L PCC 1:3:6 type C2 as Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in

Supply & fix 150mm dia salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed.

S&F rolled MS framed work as in doors or gate of angle or other section with gusset plate, rail, brases etc ornamental and intricate design including either hooks and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-0 or 310-o complete all as specified and directed

S&F mild steel plain black sheet 0.80 mm th. in steel gate and similar work,cut to size hole punched including round headed screw/welded with steel framing with 40mm lap joint with reveted or welded seams including bending or turning up ,mitred angles etc as required complete all as specified and directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down ceiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Namkum complete all as specified and as directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One light point controlled by one, two way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One bell point controlled by one, bell switch 5 Amps

Description all as per item No 153 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

S & F for Switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed at site.

S & F for switch bell push piano type 5 amp, 230 Volts Complete all as specified and directed at site.

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

S&F switch socket combination 2 in 1, 3 pin, 15 amp multipurpose, flush type, all as specified and as directed

Supply and fixing ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified.

S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site.

S & F for lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make : Schneider, Havells, ABB.

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed

Labour only for refixing the celing fan/ Exhaust fan obtained from item No 4 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 2 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 2 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired, warrenty option of 2 years from date of installation and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed.

S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

M/S JAI MATA DEE CONTRUCTION CO. (BID ID -3208630)

M/S ANUJ KUMAR (BID ID -3210135)

BHARATI ENTERPRISES (BID ID -3208649)

BUILDCON ENTERPRISES (BID ID -3204978)

M.H CONSTRUCTION (BID ID -3204905)

Raj Construction (BID ID -3209934)

M/s Ray construction (BID ID -3209912)

M/S SWASTIK HI-TECH BUILDERS PVT LTD (BID ID -3209474)

M/S RANKWAR CONSTRUCTION (BID ID -3210143)