SPL REPAIR IN BLDG NO N-37, N-38 AND N-39 OF STOCKING WING AT DEPOT AREA OF 22 RAPID (S) ORD UNIT UNDER AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc completed all as specified & directed.

M & L brick work with fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 completed all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each. Completed all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each. Completed all as specified & directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm MS sheets complete all as specified & directed.

S&F for factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, completed all as specified & directed.

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F Mild steel sliding bolt 300mm long plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate completed all as specified & directed.

S&F mild steel barrel tower bolt stove enameled black with bright bolt 200 mm long completed all as specified & directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) completed all as specified & directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) completed all as specified & directed.

Supply and fix 150mm size helical door spring including roller and plate fixed with screws to wooden or welded to iron chowkat complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc completed all as specified & directed.

M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring completed all as specified & directed.

M&L PCC 1:3:6 type C-0 (using 12.5 mm greded aggregate) for hold fast pressed steel frame etc completed all as specified & directed.

M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, completed all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws in ridges. Completed all as specified & directed.

Dismantling timber scantlings 40 sq. cm and over in section as in framed work, in any position completed all as specified & directed.

S&F rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, reveting and / or welding or connecting with bolts and nuts (including revets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing conf to Fe-410-W (Gde-E-250) quality A. Completed all as specified & directed.

Dismantling asbestos cement (Corrugated or Semi corrugated ) sheet including ridge as in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws in ridges. Completed all as specified & directed.

S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 completed all as specified & directed.

Material & labour for powder coated GI frame work(snap grid) suitable for size as in false ceiling of size 605mm x 605mm including fixing 4mm thick gypsum board/E board in ceiling size 60cm x 60cm fixed to metacil snap gird and including dismantling of old unserviceable / exisiting wall and ceiling boards or insulation boards/slabs any thickness including cover fillets, consisting of followings and all as directed:-i) Powder coated GI sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of powder coated main /cross tee of size 36.5mmx25mmx1.0mm thick and 25mm x 25m x1.0mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of S & F 2mm to 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with powder coated GI angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with powder coated GI angle of size 25mmx25mmx1.0 mm anodized thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron.

Supply & fix galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer complete all as specified & directed.

Materials & labour for prepration of newely plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one coat of wall putty of, any colour, complete all as specified & directed.

Material and labour for preparation of old surfaces finishing of walls and applying two coats of oil bound distemper over a coat of putty complete all as specified & directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc. Completed all as specified & directed.

M&L Machine cut kota stone slab flooring 15mm to 20mm thick laid over & including 20mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed all as specified & directed.

M & L 15mm to 20 mm thick machine cut pre polished kota stone slab as in skirting and jointed with grey cement slurry mixed with pigment 10mm thick CM 1:4 to match the shade complete all as specified and directed.

Materials & labour for old plastered surfaces including finishing the surfaces of wall with primer and applying two coats of cement base paint of, any colour, complete all as specified & directed.

Supply & fix steel windows or ventilators fixed type, complete all as specified & directed.

S&F as in figured glass, 3mm thick, pin head type and glazing with oil putty / beading in square not exceeding 0.5 sqm each paint complete all as specified & directed.

m/s gupta construction (BID ID -3401356)

ATHARV CONSTRUCTION (BID ID -3401210)

AR Enterprises (BID ID -3401406)

B.K.construction (BID ID -3396265)

SHAKTI CONSTRUCTION CO (BID ID -3392874)

P K ASSOCIATES (BID ID -3390844)