8332 REPAIRS TO FLOORING PLASTERING CEILING AND ALLIED WORK IN CERTAIN BLDG IN AIPT AND APTC UNDER GE CENTRAL PUNE

Amount

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc in cement mortor of any description complete all as directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 including Demolition of old brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc all as specified and directed..

M & L for rendering 15mm thick cement plaster 1:6 other than fair faces ofbrick or stone surfaces of wall all as specified and directed.

M & L for 5mm thick plastering in CM 1:3 on concrete on fair faces concrete surfaces of ceiling finished even smooth with thin layer of sagol finish complete all as specified and directed.

M & L for preparation of new plastered surface and applying three coats of white wash on ceiling all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided etc and rubbish off the premises complete all as directed

M & L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded aggregate) as in levelling course etc complete all as specified.

M & L for PCC (1:2:4) type B1 50 mm thick ((using 20 mm graded aggregate) as in levelling course etc complete all as specified.

M & L for PCC (1:2:4) type B0 25 mm thick ((using 12.5 mm graded aggregate) as in levelling course etc complete all as specified.

Material and labour Virified Ceramic tiles light shade (square/ rectangular) polished, of size 600mm x 600mm x 10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM (1:6) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

Material and labour Virified Ceramic tiles (light shade) of size 600mm x 600mm x 10 mm thick (square/ rectangular) polished, as in skirting, set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 10mm thick backing coat in CM (1:4) including tringular filletting in CM 1:4 on top of tiles all as directed and specified.

M & L for coloured non-skid tiles 400 x 400 x 7 to 8mm thick (square/rectangular) in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all specified.

M & L for coloured non-skid tiles 300 x 300 x 7 to 8mm thick (square/rectangular) in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all specified.

M & L for Glazed Coloured ceramic tiles in verticle surfaces 450 x 300 x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in C:M 1:4 as a backing coat with filleting trangular shape on top of tiles etc completed all as directed

Demolation of stone slab/tiles of any description or thickness laid, bedded and pointed in cement mortar/in floor, skirting, hard standingg, Apron etc

M & L for Machine Pressed Precast concrete glossy finish interlocking Paver block of any shape and size confirming to IS 15658 - 2006 of 80 mm thickness M-40 grade with grey cement and pigment over and including 25 mm thick sand coushioning complete all as specified and directed

Material and labour for Chequered cement concrete tiles glossy finish of size 25cm x 25cm x 25mm thick over and including 15mm thick screed bed in CM 1:6, set, jointed with grey cement and pigments and pointed in neat cement slurry in floors complete all as directed and specified.

M & L for 20 to 25mm thick machine cut Kota stone (550 x 550 mm) in flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing upto entire satisfaction of Engineer-in-Charge complete all as specified over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

All as item 20 above but kota stone slab of size 100/150mm x 550mm x 20-25mm thick in riser of steps, skirting , dados and mirror polished to entire satisfaction of Engineer-in-Charge laid over and including 10mm thick backing coar to receive the stone in cement mortar 1:3 set and jointed complete all as directed and specified.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, shelve and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 all as specified and as directed

M & L for machine cut cudappah stone slab 20-25mm thick as stand for kitchen platform, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab on vertical supports of kitchen platform / WHB counter type including grinding exposed edge to required roundal shape complete all as specified and directed.

Dismantling of boarding, any description fixed in any position with nails i.e. cupboard shutters , partition, false ceiling and wall lining etc and similar position complete.

S & F Anodised aluminium snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete with including 8mm thick Gypsum ceiling board of Make & model No ARMSRONG OPTRA RH 95 High sound absorption 0.9 NRC or equivalant make as given in Appx 'A' including making nithces for fan , light , etc complete with sound proof Engineering as per Manufaturere's instructions with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 36.5 x 23.5 x 1.5mm and 23.5 x 23.5 x 1.28mm respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 25mm x 25mm x 1.5mm thick . (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.

S & F Gl frame work of size 605 x 605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete. Note:- ceiling band will be measured & paid separately

M & L for 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed

S & F 18/19 mm thick, prelaminated PVC moulded solid shelves and drawwers boxes fitted under cooking platform and other platfors including 2 Nos telescopic channel, 1 No handles (50mm to 65mm) including dismentling of existing wooden / PVC shutters fixed all as specified and as directed by Engineer-in-Charge complete

S & F in repairs bib tap of PTMT for 15mm bore dia pipe Make - Prayag Cat No -122 OR equivalent to Polytuf / Pearl complete all as specified.,

S & F Galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc fixed to walls and ceilings or laid in floors complete including taking up or down old unserviceable GI tubing all as specified and as directed of following sizes :-.

(a) 15 mm bore dia

(b) 20 mm bore dia

Discnnecting existing PVC over head tanks upto 500 Litres capacity, setting aside (or lowering if required) for water tanks, dewatering, cleaning and sterilisation with wire/ brush/fine steel wire brush. clothes, removing all dirt and scale and algae formation inside the tank by using TERBAC G5 (a lan tested chemical) including writing with yellow paint over base of the tank wall as "TANK CLEANED ON" with date, month and year of minimum of 10 cm height in capital letters/numbers. The tank cleaning process shall be follow as under : - (a) To drain out the water by using exit valve or high capacity dewatering system. (b) Cleaning all the algae formation inside the tank by using TERBAC G5 chemical. (c) Scrubing the walls with mechanised scrubber & fresh water cleaning by high speed jet pump. (d) 1st stage of bacteria screening by degermification by using TERBAC G5 halogen compoud. (e) Cleaning the floor of the water tank by industrial vacum cleaner. (f) 2nd stage of bacteria screening & sterilizing method by using UV Ray within the tank & killing all suspended bacteria. (g) 3rd stage by using strong oxidizing agent TERBAC-G65

All as per item 33 above but up to exceeding 500 Litres upto but not exceeding 1000 Litres capacity tank

All as per item 33 above but up to exceeding 1000 Litres but not exceeding 2000 Litres capacity tank .

S & F fixing in repair PVC OH tank cover of same colour of tank made of best quality PVC and fixed in position at any height secured tightly with tank complete

Supply and Fix rotational moulded polythylene water storage tanks, 500 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position connection up including dismantling of old broken/damaged PVC water tank complete all as specified and directed.

Supply and Fix rotational moulded polythylene water storage tanks, 1000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position and connection up including dismantling of old broken/damaged PVC water tank complete all as specified and directed.

Supply and fixed in repairs kitchen or laboratory sinks with drainage board made of stainless steel 1mm thick with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.and directed

Supply and Fix in repairs vitreous china urinal half stall type, with fixing accessories, including fixing plugs etc (but excluding flushing cistern and flush pipe) and fix to walls and connect to existing flush systems complete as directed and specified

S & F in repair vitreous china squatting pan "ORISSA" pattern size 580 mm x 440 mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) including including making good to floor with including cement concrete complete all as specified

S & F in repair vitreous china wash down water closet pedestal pattern (EWC), white with including cast iron 'P' or 'S' trap and connection to trap, white seat cover closed pattern and Jet spray etc. (but excluding flushing cistern and flush pipe) including making good to floor with including cement concrete complete all as specified

S & F in repair syphonic action PVC low level flushing cistern of 10 Ltr capacity, white with including internal fittings, brackets, 32mm flush pipe etc, complete all as specified.

Supply and Fix in repairs vitreous china Wash hand basin flat back, size 550 x 400mm white excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete

S & F in repair, 15mm dia Angular stop cock with wall flange cast copper alloy chromium plated fancy type screwed down high pressure with crutch or buterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in reapairs Stainless steel Plate rack made of sheet grade SS-304, thickness not less 0.63mm of standard size (36” x 36” x 10”) & approved quality of finish, complete all as specified & directed.

Supply and fixed in repair stop valves, 15 mm bore dia cast copper alloy fancy type, screwed down, high presuure, with crutch or butter fly handle, screwd both ends for iron pipe or for unions fancy type, chromium plated (long shank concealed type) complete

S & F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

S & F in repairs fancy type chromium plated bib tap, cast copper alloy with crutch or butter fly handle ,incl wall flange, screwed down,screwed for iron pipe 15 mm bore or brass ferrule complete all as specified and directed.

S & F in repair PVC connection 15 mm of size with PTMT nut of length 600 mm.

Supply and Fix in repairs Pillar tap 15mm bore dia , cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete.

S & F in repair 20mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as directed

S & F in repair 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete

Taking down chowkat or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame). complete all as specified and as directed

Taking down Chowkats or frameswith shutters not exc 1.5 Sqm each (without taking off shutters from the frame). complete all as specified and as directed

Taking down Shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed

Taking down Shutters of any description not exc 1 Sqm each complete all as specified and as directed

Taking down Shutters of any description not exc 1 Sqm each and re-fixing in same opening after carrying out necessary adjusting / minor repairs complete all as specified and as directed

S & F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete as directed

Supply and fixing 35mm thick 2nd class hardwood factory made plain framed panelled shutters (two panel ) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS: 1003 ( Part -I) kiln seasoned and chemically pressure treated complete fixed to chowkats all as specified.

Supply and fixing factory Made 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) complete all as specified.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2020 Part II complete all as specified and directed.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as shown in drg give on page 176 of SSR 2020 Part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 Part II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.

Dismantling aluminium section any description complete all as specified and directed.

S & F aluminium powder coated frame for doors & windows Shutters, ventilators, with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S & F powder coated aluminium door shutters (Single or double leaf) , or partition , aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium snap beading, screws etc. complete all as specified

S & F three track sliding window & ventiltors with two or more shutter with including using 5mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F louvers glass ventillators with partially guaged shutter with including using 5mm thick x 10 cm wide frosted glass strips with following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S & F stainless steel Wire cloth 0.71mm nominal dia of Wire and average Width of aperture 1.18mm and fixed with tinned tacked to steel or wooden windows/door/shutters/frames etc. complete all as specified and as directed

S & F in repairs galvanised steel Wire cloth 0.56mm nominal dia of Wire and average Width of aperture 1.18mm and fixed with stainless steel stapple/ wooden beads to steel or wooden windows/door/shutters/frames etc. complete all as specified and as directed

S & F in repair ordinary quality sheet glass 3.00 mm thick glazing with oil putty and atleast 06 Nos MS glazing clips per window pane fixed to steel window frame complete all as specified and as directed.

S & F in repair door closer hydraulically operated regulated, aluminum die cast body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed (aluminium extruded section) complete all as specified and as directed

S & F continuous (Piano) hinges, mild steel bright finished or electro galvanised width of flap 30mm all as specified and as directed

S & F aluminium anodised powder coated barrel tower bolts of extruded section 150 mm long all as specified and as directed

S & F aluminium anodised powder coate handles, fabricated type of size 150 mm all as specified and as directed

S & F mortice lock vertical type 100mm brass four lever complete Make - Godrej or equivalent.

S & F butt hinges 100mm size MS cold rolled medium weight all as specified.

S & F for 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete

S & F in repair aluminium alloy sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm long all as specified and as directed

S & F in repair 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller and roller plate complete

S & F MS framed work such as grills , grating with ends of bar shoudered and/or riveted or forged into spikes , framed Guard bars, railing and likes etc conformed to Fe-290, Gde-E-165 of MS angle or other section complete as directed .

M & L for preparation of new steel iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide zinc primer all as directed

S & F for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed

S & F in repairs aluminium powder coated fancy type curtain rod 20mm bore dia with rings @10 cm c/c complete all as specitied & directed

S & F in repairs Stainless steel fancy type brackets complete all as specified and directed.

Providing and fixing vertical venetion blinds 100 louver width quality of approved make fabric made of 100 % polyster woven fabric thickness 0.4 mm width of acralic coating resistance to cracking and fraying and treaed for dust repellency , vertually maintance free having plastic bottom chain thickness of 0.5 mm and dia 3 mm plastic with metal bottom weight 116.2 mm x 48.30 mm and suitable coating on exteriaor including all fixures and fitting complete in all respect as design/colour/shade including requisite istallation bracket etc as required for installation at site with anchoring arrengement including taking down old unserviceble blind complete all as specifed as directed

M & L for preparation of old plastered surface of wall and applying one coats of oil bound distemper complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coats of cement based paint complete all as specified and directed.

M & L for preparation of old plastered surface of wall/ceiling and applying two coats of white wash complete all as specified and directed.

R K CONSTRUCTION AND ENGINEERING