SPECIAL REPAIR TO BLDG NO P-211 OFFICERS MD ACCN (CAPTAIN AND BELOW) UNDER AGE (I) AYODHYA CANTT

Amount

Dismantling brick tiles any size laid bedded and pointed in any mortor.

M&L for PCC 1:2:4 type B0 (using 12.5 mm grd stone agg) in roof padding finishing the surface fair & even.

M & L for preparation of newly plastered surface of roof including cleaning the surface by using wire brush/ pressure hose and applying high performance polyurethane liquid membrane roof casting cold applied in two coats @ 1.5 Kg/Sqm applied with spray/brush an elongation of 300% to 700% and tensile strength of not less than 3N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C 1305, shore a hardness of not less than 60as ASTM D 2240. The item includes epoxy prime applied @ 0.15 Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instructions and sound engineering practice complete all as specified and directed.

M&l screed bed 10 mm thick in cement mortar 1:3 over roof slab mixed with water proofing compound ( WPC to be measured and paid separately) as per manufacturer’s instructions finished even & fair complete.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

M&L for dark shade/double charged/ultra charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified.

M&L for dark shade/double charged/ultra chargedVitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar

M&L for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete.

M & L for green Marble work 18 to 21 mm thick (table rubbed and polished) in steps,riser jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed .

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks

M&L for 1st quality non skid coloured ceramic ENDURA tiles n exc 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 75 mm thick cement concrete type-C-2, 1:3:6 using 40mm graded stone aggregate finished cement concrete surface even and smooth without using extra cement in floor

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement. Note-Plint protection will be laid in outward slope of 1in 12 and in alternative bays/panel.L ength of panel shall not exceed 2.5 m and joint between two panel shall be filled with mastic filling comrimising mixture of one part of hot blown bitumen 85/25 penetration and two part of heated sand

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ) external surface all as specified

Supply only Liquid water proofing compound of approved make.

M&L for rendering 10mm thick in CM (1:6) on Brick/ Conc surface finished even and fair on internal surfaces of wall.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling

M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer incl 1mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coat of oil bound distemper complete all as specified.

M&L for preparation of old surfaces of ceiling and applying two coats of Oil bound distemper complete all as specified

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe.

-ditto- all as per item above but 75mm.

M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe.

S&F 16 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe.

M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.)

S&F in repair 15 mm size bib taps (staright line model) with chromium plated complete all as specified Make- Esco,Gohre,Kohler

S&F in repair 15 mm size angular stop cock with wall flange chromium plated complete all as specified Make- Esco,Gohre,Kohler

S&F in repair Vitreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair brass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and directed

S&F in repair Health faucet brass body with 8 mm dia 1.00 m long flexible tube and wall hook including fixing complete all as specified and directed

S&F in repair stainless steel toilet paper holder with flat recessed type complete all as specified and directed.Make Jaquar or equivalent as approved by AGE(I)

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair Corner glass shelf with brass chromium plated bracket fixed to wall complete all as specified and directed

S&F in repair Sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified

S&F in repair single lever sink mixer swinging spouts(wall mounted model)with connecting legs and wall flanges(chromium plated) complete all as specified

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore central hole basin mixer with regular spout with popup waste system with 450 mm long braided hose complete all as specified Make- Esco,Gohre,Kohler

S&F in repair 15 mm bore brass CP Wall mixer with provision of overhead shower with 115 mm long bend pipe on upper side connecting legs and wall flanges for iron pipe and fixed complete all as specified and directed Make- Esco,Gohre,Kohler

S&F in repair Brass chromium plated shower rose 125 mm size and fixed complete all as specified and directed

Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed.

PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified

S&F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc.

S&F 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc.

S&F in repair Kitchen rack plate of stainless steel of size 75 x 60cm all as per sample kept with GE office

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed

S&F in repair brass chromium plated Tumbler holder all as specified as approved by Engr-in-charge.

S&F in repair SS soap dish complete all as specified and directed Make Jaquar or equivalent as approved by AGE(I)

S&F in repair fancy type drapery rod 20 mm dia mild steel, chromium plated with fixing brackets, incl side brackets, finials complete complete all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each all as specified.

S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified.

Providing and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified.

S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and fixed

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and fixed

M&L PCC (1:2:4) type B-1, using 20mm graded stone aggregate as in bed block and filling in door frames

S&F 30 mm thick flush shutters, solid core construction, with black board core moulded design with sunmica sheet on both sheet on both side hydraulic hot pressed with adhesive complete all as specified and directed

S&F for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 150mm Aluminium handles, cast type, anodised.

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed with ISI Marked complete all as specified.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer complete all as specified.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed

M&L MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165

Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm(+ - 0.2 mm). Window profile with hollow section with multi chamber.Frame (88 mm x 52 mm),sliding sash (42 mm x 67 mm ).Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners,including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.EPDM gasket 1.2 + - 0.2mm thick galvanized steel frame (30mmx18 mm) 2 No.s ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mmx100 mm long fasteners.HardwareTouch lock of zinc alloyed (white powder coated ),steel roller system ,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories .(Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Net opening will be measured for payment purpose.)Area n exc 2.00 Sqm Each

M&L for 4.8 mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring.

S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F in repair 150 mm X 100 mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1 complete all as specified and directed

S&F 18 mm thick celuka ply of single side prelam/Rigidlam colour fixed with epoxy coated screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete all as specified and directed (Density - 575 to 600 Kg/CBM)(Make Rajshri plastiwood or equivalent as approved by AGE(I)

S&F 12 mm thick celuka ply (PVC) of plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and directed (Density - 575 to 625 Kg/CBM)(Make Rajshri plastiwood or equivalent as approved by AGE(I)

S&F auto closing hinges 35 mm of 0 crank(KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed (Make- KAFF, Godrej & Hettich or equ as approved by AGE(I)

S&F magnetic catcher of size 20 mm X 50 mm suitable for cupboard shutter complete all as specified and directed

Supply only 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed

S&F stainless steel 304 grade wire basket of different sizes for utensils with necessary fixing clips fixed in cupboards etc complete in all respect complete all as specified and directed .

S&F 40 mm width continuous (piano) hinges, mild steel, bright finish or electro-galvanised complete all as specified and directed .

Supply only Telescope basket (channel) 18/20 inch(45/50cm) length extruded MS galvanised over rollers of approved make complete all as specified and directed

S&F stainless steel peg set of 6 hooks complete all as specified and directed.

Demolition of brickwork or stone boulder masonary built in cement mortar or cement lime mortar.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius laid in cement mortar 1:6 completed all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of not less than 01 mm thick wall care putty and including a coat of exterior wall primer complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of not less than 01 mm thick wall care putty and including a coat of exterior wall primer & complete removal of existing surface complete all as specified and directed. 1-Note-Exterior primer & acrylic emulsion paint to be applied on wall surface by using Airless spray technology with working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr.The spray machine shouild be of reputed manufacturer with pro gaurd technology and capability of tracking pressure.2-Allow 6-8 hrs to dry the surface for painting of subsequent coat

Taking down carefully aluminium point wiring 1.5 Sq mm of complete,switch socket 5amps & power point etc including switches and making good distured surfaces of walls / ceiling etc all as specified.

M & L point wiring for one light point/fan point controlled by one, one way switch using 1.5 Sqmm nominal cross sectional area multistranded copper conductor,FRLS PVC insulated unsheathed cable in and including 20 mm dia or higer size PVC concealed conduit and fittings with 1.5 Sqmm nominal cross sectional area used as continuous earth wire and connected to earth dolly including modular metal flush boxes with white cover plate and making neccessory electrical connection of modular type Switches, sockets,regulators etc all as specified and directed for the followings-

One light point or fan point controlled by one switch

One bell or buzzar point controlled by one push button on the same circuit or independent switch

One 3 pin socket outlet 5 amps on same board with other switches

One 3 pin socket outlet 5 amps socket outlet independent

One light point controlled by 2 Nos two way switch

M & L for point wiring with 2.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit/PVC casing caping of adequate size with all fittings and accessoriesincluding modular metal flush boxes with white cover plate and making neccessory electrical connection of modular type Switches complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one 16 Amp socket outlet on independent board.

-ditto- all as per sl item No 107.00 here in before but with cables 4 sq. mm size

S & F modular switch one way 6 Amps

S&Fmodular switch , one way, 16 Amps

S & F modular switch 2 way 6 Amps

S & F modular socket outlet 5 pin, 6 Amp flush type

S&F modular socket 2 in 1, 3 pin, 5 and 16 Amps flush type complete all as specified and directed.

S & F ceiling rose surface bakelite three terminals

S & F stepped type electronic fan regulator flush type complete all as specified and directed

S & F bell push flush type 5 Amp

Supply & fix bell /ding dong 230 volts Ac single pole complete all as specified and directed

M & L for Sub main wiring complete with two run of 4 sqmm ( nomoal area) single core ( Using colour code for phase & Neutral and one run of 4 sqmm ( nominal area) single core Green in colour as earth continuity conductor to common earth dollyPVC insulated multistranded copper conductor 1100 volts FR grade drawn through PVC casing & caping including taking down the existing submain wiring complete all as specified and directed. Note for item No. 118 :Two runs of 4 sqmm ,one run of 4 sqmm size& one run of casing caping cable shall be measured as one length

M & L for Sub main wiring complete with four run of 10 sqmm ( nominal area) single core ( Using colour code for phase & Neutral and two run of 10 sqmm ( nominal area) single core Green in colour as earth continuity conductor to common earth dolly PVC insulated multistranded copper conductor 1100 volts FR grade drawn through PVC casing & caping including taking down the existing submain wiring complete all as specified and directed. Note for item NO 15. :- Four runs of 6 sqmm ,Two run of 4 sqmm size& one run of casing caping cable shall be measured as one length

Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc. of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash/ paint/ distemper wherever required complete all as specified and as directed.

S&F epoxy powder coated MCB, DB, double door TPN vertical 8 way suitabe for MCCB TP as incomer and MCBs as outgoing, fitted with Bus Bars, Neutral Links including grouted/flush to wall complete all as specified. [Note: - MCCB and MCBs will be measured and paid under separate item]

S&F MCCB, 3 pole ,125 A, 16 kA

S&F MCB, sp 40 A, 16 kA, 'C' curve

S&F epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.

M & L MCB SPN 40 Amps 240 volts.

M & L MCB SP-32 Amps 240 volts.

S&F LED tube light fitting,1X18 Watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use paclk fitting including provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting including taking out complete all as specified and directed.

S&F LED tube light fitting,1X10 Watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use paclk fitting including provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete incl taking down complete all as specified and directed.

S&F modular AC box with 20 amp SP MCB plastic enclosure all as specified and directed.

Taking down existing earthing of any description and M&L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate not less than 1.50 m below ground level, connected to GI lead wire of 4 mm dia. (7.50 m long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 1.5 mm nominal bore (7.50 m Long) for earth plead wire, watering pipe light grade of 20 mm nominal bore, 0.63 mm thick CI funnel, wire mesh etc complete including necessary earth work and excavation in any type of soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified.

J R ENTERPRISES (BID ID -3451449)

K R KAUSHAL AND SONS (BID ID -3451668)

SAI RAM ASSOCIOATES (BID ID -3457015)

JYOT BUILDERS (BID ID -3457168)

Saket Traders (BID ID -3456976)

Jairajyadav security services (BID ID -3457028)

M/S IQRA CONSTRUCTION (BID ID -3451096)

R K BROTHERS (BID ID -3451277)

M/S PERFECT CONSTRUCTION CO. (BID ID -3446255)

awashyakta enterprises (BID ID -3451800)