RATE CONTRACT FOR SUPPLY OF LOCAL PURCHASE SAFETY APPLIANCES MATERIAL under Jurisdiction of General Manager (OandM) MPMKVVCL,Morena

Tools (1 No. Cutting Plier, 1 No. Screw Driver 12 Inch., 1 No. Screw Driver 8 Inch. and 1 No Neon Tester)

Line man Discharge road 6 feet long Bamboo with 2.5 sqmm copper wire 6 mtr length fixed at top of bamboo 3 type copper strip size 173x19x3

Safety Helmet

Rubber Hand Gloves Size 14” (355mm) Joint less dully tested up 17000 volt and working potentials 7500 volt as per ISS no. 4770-1991 Make Crystal

Rechargeable Torch with 6 to 6.5 volt battery charger supply AC 240 watt

Aluminum Lugs suitable for 50 Sq.mm cable . As per IS 8309

Aluminum Lugs suitable for 70 Sq.mm. cable As per IS 8309

Aluminum Lugs suitable for 120 Sq.mm. cable As per IS 8309

Aluminum Lugs suitable for 150 Sq.mm

Aluminum Lugs suitable for 185 Sq.mm

Aluminum Lugs suitable for 300 sq.mm

Chain Pully Block Capacity (2 ton)

Chain Pully Block Capacity (3 ton)

Chain Pully Block Capacity (5 ton)

11kv DO Fuse Elements 3 Amp As Per ISS-9385

11kv DO Fuse Elements 5 Amp As Per ISS-9385

11kv DO Fuse Elements 10 Amp As Per ISS-9385

11kv DO Fuse Elements 15 Amp As Per ISS-9385

Flood Light of 200 Watt(complete) Make-SHARP With 2 year replacement guaranty & pipe / clamps suitable for pole mountin

Hand operating Crimping tool Suitable for Crimping of aluminium copper lugs from 25 sq. mm to 300 Sq. mm with changeable dies

LED Street Light of 48-50 Watt (complete) Make-SHARP With 2 year replacement guaranty & pipe /clamps suitable for pole mounting

Manual Pole pruner longth 6.5 m extendable length 2362-6500 mm length adjustable 75 Stage with 16" curved tooth Saw weight 2.55 Kg.

CT Clamp suitable for 16 mm dia brass stud aluminum portion filled with 4 Nos. GI Bolt & Nuts with spring and plain washer clamp suitable for ASCR Conductor (weight 422 gram)

Insulated Neon tester Make- Venus/IS standard

Raincoat (Rubberisied) with cap Make Duckback

Bi-metallic clamp suitable for 315, 200, KVA X-mer flat brass size 60x60x10 mm in central 20 mm hole having joint aluminium section size 60x70x42mm suitable for 150 sq .mm cable 06 No. GI Nut & Bolt flat and spring washer weight 0.900 gram (Approx+-5)

Bi-metallic clamp suitable for DTR Brass pad 50x50x6 mm with 20 mm hole fitted in aluminium portion size 70x40x40mm fixing with 06 No. GI Nut & Bolt weight 0.600 gram

Bamboo ladders 24‟ (feet) Long approx having 2” to 3” Dia at the Bottom and 1.5”to 2.5” at top of Bamboo the Cross Piece i.e. 16 No. Step should be at a distance of approx 17” and bamboo ladder should be tightened with G.I. Wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm

Poly Propylene Rope 24 mm Dia make Tuff Rope/Equivalent Standered make with ISI mark.

Piercing connector Type I for single phase/Three Phase suitable for 70-150 sq.mm cable

Gum Boots Suitable for 200 C and upto 560 Double density sole Shoes height 15 inches (size 8 No.)

Gumboots suitable for 200 C and up to 560 C double density sole shoes Heights 11 inches ( Size – 9 No.)

TC Fuse Wire 14 SWG As Per IS 8130:1984

TC Fuse Wire 16 SWG As Per IS 8130:1984

HRC fuse base 250 Amp with copper contact.173x19x3

HRC fuse base 400 Amp with copper contact

HRC fuse link 400 Amp suitable for 400 amp HRC fuse base as per ICE/ISI Standard.

HRC fuse link 400 Amp suitable for 400 amp HRC fuse base as per ICE/ISI Standard.

Screw driver insulated plastic handle blade length 250mm (10 inch) Make- Venus/IS standard

Screw driver insulated plastic handle blade length 200mm (8 inch) Make- Venus/IS standard

Insulated Cutting Plier 8” (inch). Make Tapariya, venus, jhalani or other euqivalent IS standard

Insulated Fiber Discharge Rod 18 feet long extention ¾ section with alluminium c type clamp with wire