CERTAIN REPAIR TO JOINERIES IN OTM AND MD ACCN AT AF STN CHANDIGARH UNDER GE(AF) CHANDIGARGH

Note :The unit rate quoted by the tenderer under Col No (13) of Sch `A’ (BOQ) unless specifically mentioned otherwise such as labour only/fixing only, for all items of works shall be deemed to be including cost of all materials, labour, tools and plants, testing and commissioning of work in position complete as required for entire completion of work.

Taking down shutters of any description not exceeding 1.00 Sq. m m each and making good the disturbed surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exceeding 1.00 Sq. m but not exceeding 2.00 Sq. m eeach and making good the disturbed surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description not exceeding 1.00 Sq. m each and Easing, Adjusting, replacing of builders hardware and screws including welding/cutting/chesing as required and refixing in same opening , complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exceeding 1.00 Sq. m but not exceeding 2.00 sqm each and Easing, Adjusting, replacing of builders hardware and screws including welding/cutting/chesing as required and refixing in same opening , complete all as specified and as directed by the Engineer-in-Charge.

Taking down carefully aluminum door/window Chowkhat or frame without taking of shutter from the frame and refixing in same opening after inspecting the parts/members of doors including minor repairs as required and removing unservicable members and replace as with new ones ,complete all as specified and directed by Engineer-in-Charge. Note: Replacment of aluminium section, glass and rubber packing shall be measured and paid separetly.

Taking down carefully aluminum shutters of aqny description exceeding 1.00 Sq. m but not exceeding 2.00 sqm and refixing in same opening after inspecting the parts/members of doors including minor repairs as required and removing unservicable members and replace as with new ones ,complete all as specified and directed by Engineer-in-Charge. Note: Replacment of aluminium section, glass and rubber packing shall be measured and paid separetly.

Anodised aluminium frame for doors, windows,ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engineer-in- Charge.

Aluminium Anodised door shutter, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, 3 hinges, anodised aluminium snap beading screw etc for fixing of Glass or baord , complete all as specified and directed by Engineer-in-Charge Note: Supplying and fixing of Glass or board shall be measured and paid seperately under respective items.

Anodised aluminium window and ventilator shutters fixed type ,without sash bar,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed by Engineer-in-Charge. Note: Supplying and fixing of Glass or board shall be measured and paid seperately under respective items.

Aluminium anodised window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) ,suitable handle (1 no.), complete all as specified and directed by Engineer -in-charge.

Aluminium powder coating (miniumum thickness of powder coating is 50 micron) frame for doors, windows,ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engineer-in- Charge.

Aluminium powder coating (miniumum thickness of powder coating is 50 micron) for door shutter, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, 3 hinges, anodised aluminium snap beading screw etc for fixing of Glass or baord , complete all as specified and directed by Engineer-in-Charge Note: Supplying and fixing of Glass or board shall be measured and paid seperately under respective items.

Aluminium powder coating (miniumum thickness of powder coating is 50 micron) for window and ventilator shutters fixed type,without sash bar,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed by Engineer-in-Charge. Note: Supplying and fixing of Glass or board shall be measured and paid seperately under respective items.

Aluminium powder coating (miniumum thickness of powder coating is 50 micron) for window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) , hinges type B-21 100mm long (2 no.) ,suitable handle (1 no.), complete all as specified and directed by Engineer -in-charge.

Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions and shown on drawing in section 8 on Page 180 of SSR Part-II ,complete all as specified and directed by the Engineer in Charge.

Factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplied and fitted as per specification & drawing and as per manufacturer's instructions and shown on drawing in section 8 on Page 181 of SSR Part-II ,complete all as specified and directed by the Engineer in Charge.

Factory made box type steel window with pintle hinges and two nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer in and including cutting holes in brick walls for inserting holdfasts and making good dismantled portion in cement mortar 1:4 or cement concrete 1:2:4 Type B-1, complete all as specified and shown on Drawing No CEAF/STD-184-2012 Sheets 1/3 & 3/3 and as directed by the Engineer in Charge.

Factory made made box type steel window with pintle hinges and two Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete in and including cutting holes in brick walls for inserting holdfasts and making good dismantled portion in cement mortar 1:4 or cement concrete 1:2:4 Type B-1, complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2 and as directed by the Engineer in Charge.

Factory made box type steel ventilator fixed type, dovetailed or welded and with one shop coat of zinc chromate primer in and including cutting holes in brick walls for inserting holdfasts and making good dismantled portion in cement mortar 1:4 or cement concrete 1:2:4 Type B-1, complete all as specified and shown on Drawing No CEAF/STD-186-2012 Sheets 1/1 and as directed by the Engineer in Charge.

Factory made made box type steel ventilator with glazed shutter or gauzed shutter with glazing bars or flat iron 12 x 3mm dovetailed or welded for fixing wire mesh/glass and with one shop coat of zinc chromate primer in and including cutting holes in brick walls for inserting holdfasts and making good dismantled portion in cement mortar 1:4 or cement concrete 1:2:4 Type B-1, complete all as specified and shown on Drawing No CEAF/STD-186-2012 Sheets 1/1 and as directed by the Engineer in Charge.

Plain solid, straight chowkats of 2nd class hard wood (SAL) and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fitted to chowkats, complete all as specified and directed by Engineer -in-charge.

Factory made 35 mm thick (Batten thickness) 2nd class hard wood plain, framed, paneled shutters( two number No of panels) with panels of timber flat on both sides (feather edges) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and detapering from 5 mm to 10 mm around the panel on one side fitted to chowkat, complete all as specified and directed by the Engineer in Charge.

35 mm thick (Batten thickness) Second class hard wood (Hollock) Glazed and skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats,complete all as specified and directed by the Engineer in Charge.

35 mm thick factory made Flush shutters ,solid core construction with particleboard core and plywood face panels commercial type on both sides, duly provided with 6mm thick Teakwood leeping on edges alround, fitted to chowkats, , complete all as specified and as directed by Engineer-in- Charge.

Pre-laminated particle board 12mm thick , interior grade, pre-laminated both side with decorative choice laminaton fixed with screws to aluminium/timber frame work, as in doors or partitions, complete all as specified and directed by Engineer-in-Charge

Aluminium body ( extruded section ) Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80 kg , complete all as specified and directed by Engineer -in-charge.

Aluminium body ( extruded section ) Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repair , complete all as specified and directed by Engineer -in-charge.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed , complete all as specified and directed by Engineer -in-charge.

Mortice lock of size 100 mm aluminium, verticle type 4 Levers , complete all as specified and directed by Engineer-in-Charge.

Solar control film 50 micron reflective type (gareware sun control or equivalent),complete all as specified and directed by Engineer-in-Charge.

Butt hinges 100 mm size ,heavy weight, cold rolled mild steel with galvanised mild steel hinge pin, anodised and fixed type B-21 ISI marked ,complete all as specified and directed by the Engineer in Charge.

Barrel tower bolts aluminum anodizes of extruded section and fixed of 125 mm long size (length of bolt) ISI marked, complete all as specified and directed by Engineer-in-Charge

Barrel tower bolts aluminum anodizes of extruded section and fixed of 150 mm long size (length of bolt) ISI marked ,complete all as specified and directed by Engineer-in- Charge.

Handles of size 100 mm 'D' type ,extruded aluminium alloy , fabricated type anodized ISI marked ,complete all as specified and directed by Engineer-in- Charge.

Handles of size 125 mm 'D' type ,extruded aluminium alloy , fabricated type anodized ISI marked ,complete all as specified and directed by Engineer-in- Charge.

Handles of size 150 mm 'D' type ,extruded aluminium alloy , fabricated type anodized ISI marked ,complete all as specified and directed by Engineer-in- Charge.

Aluminum alloy, anodized, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 300mm, bolts not less than 12mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked) , complete all as specified and directed by Engineer-in-Charge.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length of cover plate 140mm , complete all as specified and directed by Engineer-in-Charge.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length of cover plate 140mm fixed as in repairs, complete all as specified and directed by Engineer-in-Charge.

Plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws in and including dismantling of old plain fillets ,complete all as specified and directed by Engineer-in- Charge.

Prelaminated particle board 18 mm /19 mm thick ,interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around in and including dismantling of old board , complete all as specified and directed by Engineer-in- Charge.

Continuous (Piano) hinges, width of flaps (when open) 30mm, stainless steel bright finish or electro galvanised, ISI Marked ,complete all as specified and directed by Engineer-in- Charge.

Hasp & staple of 100mm size , safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws ,complete all as specified and directed by Engineer-in- Charge.

Magnetic catcher with Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed suitable for kitchen cabinate/cupboard,complete all as specified and directed by Engineer-in- Charge.

Cup board knob 40mm dia, fixed with nut, washers / screws etc., of brass polished, bright finished,complete all as specified and directed by Engineer-in- Charge.

300mm long ordinary rat tail rod pattern MS door springs including roller and roller plate with steel screws or with welding as required at site , complete all as specified and directed by Engineer-in-Charge.

300mm long ordinary rat tail rod pattern MS door springs including roller and roller plate with steel screws or with welding as required at site and fixed as in repairs, complete all as specified and directed by Engineer-in-Charge.

Door seal 50mm wide and 1 m in lenth built in aluminium black plate with nylon brush fixed with screws fixed as in repairs, complete all as specified and directed by Engineer-in-Charge.

Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. m in each pane ,complete all as specified and directed by Engineer-in- Charge.

Sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane including fixing with glass pins to hold glass in position upto 15.00 mtr height of building ,complete all as specified and directed by Engineer-in- Charge. Note:- No extra payment for replacment of damaged wooden beads required for glazing glass in wooden window.

Sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane including fixing with glass pins to hold glass in position upto 15.00 mtr height of building in and including Hacking out old broken glass panes of any thickness, size ,quality or description from wooden frames , glazed with putty or fixed with beads ,complete all as specified and directed by Engineer-in- Charge. Note:- No extra payment for replacment of damaged wooden beads required for glazing glass in wooden window.

Figured glass 4 mm thick, pin headed tyoe and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each paneincluding fixing with glass pins to hold glass in position upto 15.00 mtr height of building ,complete all as specified and directed by Engineer-in- Charge. Note:- No extra payment for replacment of damaged wooden beads required for glazing glass in wooden window.

Figured glass 4 mm thick, pin headed tyoe and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane,including fixing with glass pins to hold glass in position upto 15.00 mtr height of building in and including Hacking out old broken glass panes of any thickness, size ,quality or description from wooden frames , glazed with putty or fixed with beads ,complete all as specified and directed by Engineer-in- Charge. Note:- No extra payment for replacment of damaged wooden beads required for glazing glass in wooden window.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frame with first class hard wood bead, ,complete all as specified and directed by Engineer-in- Charge.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frame with first class hard wood bead fixed as in repair, complete all as specified and directed by Engineer-in- Charge.

Framed work as in doors/Chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete ( Fe-290,Gde-E-165)in and including dismantling of structural steel work including doors, gates but excluding framed truss etc., complete all as specified and directed by the Engineer-in-Charge.

Mild steel, plain, black sheet of 1mm thick in hearths; covering to door shutters; covering to door chowkats (frames);chullah hoods; water tanks; water troughs;ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as required in and including dismantling of structural steel work including doors, gates but excluding framed truss etc., complete all as specified and directed by the Engineer-in-Charge.

Drapery rod of mild steel 25mm dia, ribbed/fancy type, powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall with PVC finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

Preparation of new or previously untreated wooden surfaces of any description , not otherwise described over 10 cm width or girth and applying two coats of synthetic enamells paint over one coat of pink primer ,complete all as specified and directed by the Engineer in Charge.

Preparation of new or previously untreated steel surfaces of any description , not otherwise described over 10 cm width or girth and applying two coats of synthetic enamells paint over one coat of red oxide primer,complete all as specified and directed by the Engineer in Charge.

Preparation of new or previously primed steel surfaces of any description , not otherwise described over 10 cm width or girth and applying two coats of synthetic enamells paint over previously primered surface ,complete all as specified and directed by the Engineer in Charge.

Preparation of old painted wooden surfaces over 10cm width or grith not otherwise described and applying one coat synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge

Preparation of old painted steel or Iron surfaces over 10cm width or grith not otherwise described and applying one coat synthetic enamel paint , complete all as specified and directed by Engineer-in-Charge. Note For Srl Item No. 63 to 67 :- The rates quoted against those items shall being to be included for the use of scafolding, ladders, cradles etc, removing nails, making good holes, cracks etc removing furnitures, cub boards, washing floors, floor and wall tiles,cleaning glasses, joinerys, electric fittings, wiring, conduits etc of drops, splashes and living premises clean and tidy upto entire satisfaction of Engineer-in-Charge,

Taking down rolling shutter of any descreption, size not exceeding 20 Sqm each , complete all as specified and directed by Engineer-in-Charge.

Steel rolling shutters having 1.25 mm thickness of lath , with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: but gear operated type with bevel gear box and crank handle, complete all as specified and directed by Engineer-in-Charge.

Steel rolling shutters having 1.25 mm thickness of lath , without ball bearing, as specified including top hood cover, 50mm anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, push, pull or manual type , complete all as specified and directed by Engineer-in-Charge.

Taking down rolling shutter push pull or manual type, size n.exc 12Sqm and refixing to its original position after cleaning all parts, straighting sliding rails, replacing damaged strips, bottom rails, helical spring as required, greasing/oiling, servicing for smooth functioning for all parts, including welding etc, complete all as specified and directed by Engineer-in-Charge. Note:- Replaced parts shall be measured and paid fror supply only under respective items separately.

Taking down rolling shutter gear operated type with bevel gear box ,size exceeding 10 Sqm but not exceeding 20Sqm and refixing to its original position after cleaning all parts, straighting sliding rails, replacing damaged strips, bottom rails, helical spring as required, greasing/oiling, servicing for smooth functioning for all parts, including welding etc, complete all as specified and directed by Engineer-in-Charge. Note:- Replaced parts shall be measured and paid fror supply only under respective items separately.

Supply only steel sheet 75mm wide lath strip 1.00mm thick for rolling shutters including mild steel clips at either ends duly painted with two coats of synthetic enamel paint(shade to match with the existing) over a shop coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.

Supply only mild steel spring 75mm to 150mm dia, made of high tension steel wire conforming to IS: 4454 having 60 to 80helical for smooth working condition for rolling shutters, complete all as specified and directed by Engineer-in-Charge.

Mild steel anchorig rod 50mm dia including necessary fixture for rolling shutters fixed as in repair , complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fiber, plup, insulation, etc) or insulation /slab/blankets, any thickness, including cover fillets and removal from site , complete all as specified and directed by Engineer-in-Charge.

PVC sheet fillet 5mm thick of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and drawing(Page No-180 of SSR Part-II) ,complete all as specified and directed by Engineer-in- Charge.

PVC wall lining consisting of 5 mm thick solid/Hollow printed colour PVC sheet inclusive of solvent cement complete all as specified and drawing (Page No-180 of SSR Part-II) ,complete all as specified and directed by Engineer-in- Charge.

False ceiling at all height with fully perforated 12mm thick micro tegular edges or 10mm thick sqaure edged GRG (Glass fibre Reinforce Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resitance of 99%, NRCO.50 to 0.75 as per IS 8225: 1987, Noncombustible as per BS 476 (part 4) -1970 and light reflectance of 85% (minimum) including to be laid in true horizontal level suspended on interlocking metal T -Grid of hot dpeed galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides ) comprising of main T runners of size 15x32mm of length 3000mm cross-T of size 15x32 mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) ie 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.4mm of length 3000mm to be fized on periphery wall/pertition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specification, complete all as specified and directed by Engineer-in-Charge.

Replacement of damaged aluminium beading of aluminium doors windows with new beading , complete all as specified and directed by Engineer-in-Charge.

Replacement of damaged Rubber Gasket of aluminium doors windows with new Gasket , complete all as specified and directed by Engineer-in-Charge.

Wooden wall paneling of 10-12 mm thick fixed with nails on wooden frame includind polishing and dismantling boarding of any description etc complete all as specified and directed by Engr-in-Charge.

Welding in repair exc 2.5 cm but n exc 5.00 cm in length thickness of metal to be welded n.exc 6mm, including cleaning, preparing the surfaces and holding the member in true position for maintenance of steel items such as gates, grills, doors window etc. , complete all as specified and directed by Engineer-in-Charge.

Note :Schedule of credit to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documentse.

Please Enable Macros to View BoQ information