Construction of Pre-Engineered Structure For Lab Space at Thaiyur campus, IIT Chennai, Tamil Nadu

BILL OF QUANTITY

Name of Work: Construction of Pre-Engineered Structure For Lab Space at Thaiyur Campus, IIT Chennai, Tamil Nadu

Sl. No DSR CODE 2021 DSR Amount NON DSR Amount TOTAL Amount

Sl. No DSR CODE 2021 DSR Amount NON DSR Amount TOTAL Amount

C Fire alram and Public address System ₹ 908,784.00 ₹ 71,852.55 ₹ 980,636.55

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of

2 2.6.1 excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly Cu.m 75.05 205.45 ₹ 15,418.61

dressed.All kinds of soil

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2

3 4.11 coarse sand : 4 graded stone aggregate 20 mm nominal size). Sq.m 38.30 452.25 ₹ 17,319.37

Providing and laying in position cement concrete of specified grade excluding the cost of

4 4.1.8 centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded Cu.m 101.61 6326.05 ₹ 642,804.27

stone aggregate 40 nominal size)

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075

mm ) to wet mix macadam (WMM) specification including premixing the material with water at

OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base

/ base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne

capacity to achievethe desired density, complete as per specifications and directions of Engineer-

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in

layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and

watering, lead up to 50 m and lift up to 1.5 m

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto

7 2.25(A) a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in Cu.m 543.86 368.65 ₹ 200,492.24

trenches, plinth, sides of foundation etc. complete.

Supplying and filling in plinth with sand under floors, including watering, ramming,

8 2.27 consolidating and dressing complete. Cu.m 205.48 2161.20 ₹ 444,078.10

Centering and shuttering including strutting, propping etc. and removal of form work for

9 4.3.1 :Foundations, footings, bases for columns Sq.m 56.56 307.95 ₹ 17,417.65

Centering and shuttering including strutting, propping etc. and removal of form work for :

10 4.3.3 Columns, piers, abutments, pillars, posts and struts Sq.m 73.40 804.25 ₹ 59,031.95

Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth

11 5.9.5 beams, girders bressumers and cantilevers Sq.m 572.76 608.35 ₹ 348,435.50

Centering and shuttering including strutting, etc. and removal of form for:Weather shade,

12 5.9.19 Chajjas, corbels etc., including edges Sq.m 6.10 814.95 ₹ 4,972.82

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-charge; for the following grades of

concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix

shall be payable separately. In case the cement content in design mix is more than 110% of the

specified minimum cement content, the contractor shall have discretion to either re-design the

mix or bear the cost of extra cement. All works upto plinth level. Concrete of M30 grade with

minimum cement content of 350 kg /cum

Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-charge; for the following grades of

concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix

14 5.33.2.2 shall be payable separately. In case the cement content in design mix is more than 110% of the Cu.m 26.70 10447.75 ₹ 278,954.93

specified minimum cement content, the contractor shall have discretion to either re-design the

mix or bear the cost of extra cement. All works above plinth level upto floor V level. Concrete

of M30 grade with minimum cement content of 350 kg /cum

Providing and fixing up to floor five level precast cement concrete string or lacing courses,

copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc.,

15 4.5.1 including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), CUM 0.03 9277.75 ₹ 259.78

cost of required Centering complete.1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded

stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position

16 5.22.6 and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D KG 6974.95 89.65 ₹ 625,304.27

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt

18 18.76.1 clay F.P.S. (non modular) bricks each 5.00 362.40 ₹ 1,812.00

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required)

and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required

size on the top of the floor or the side of waist slab with suitable arrangement as per approval of

Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Providing and laying autoclaved aerated cement blocks masonry with

150mm/230mm/300 mm thick AAC blocks in super structure above

plinth level up to floor V level with RCC band at sill level and lintel level

20 6.47 with approved block laying polymer modified adhesive mortar all CUM 125.36 6994.15 ₹ 876,791.68

complete as per direction of Engineer-in-Charge. (The payment of RCC

band and reinforcement shall be made for seperately)

Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade

M10 made of C&D waste from approved manufacturer in foundation and plinth in:

21 26.68.1 Cement mortar 1:6 (1 cement : 6 coarse sand) CUM 15.18 6057.95 ₹ 91,974.22

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or

crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in

two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10

22 13.19.1 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime SQM 74.72 752.40 ₹ 56,217.82

by volume of cement. Ordinary cement finish using ordinary cement

23 13.1.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) SQM 787.84 294.85 ₹ 232,294.62

15 mm cement plaster on rough side of single or half brick wall of mix: 13.5.1

Providing and fixing bright finished brass hanging type floor door stopper with necessary

25 9.82 screws, etc. complete. each 10.00 109.60 ₹ 1,096.00

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer

(having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door

26 9.83 width upto 700 mm), with necessary accessories and screws etc. complete. each 2.00 1025.65 ₹ 2,051.30

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality)

27 17.31 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and each 8.00 1411.15 ₹ 11,289.20

washers complete.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized

system of structural glazing (with open joints) for linear as well as curvilinear portions of the

building for all heights and all levels, including:

(a) Structural analysis & design and preparation of shop drawings for the specified design loads

conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind

pressure without any failure), including functional design of the aluminum sections for fixing

glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets,

screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire

stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure

equalisation & drainage and protection against

28 25.2 fire hazard including: SQM 21.00 3111.35 ₹ 65,338.35

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5

brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement

for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/

masonry/structural steel framework of building structure using stainless steel anchor fasteners/

bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel

grade 316, of the required capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather

silicone sealant compatible with the structural silicone sealant of required bite size in a clean

and controlled factory / work shop environment, including double sided spacer tape, setting

blocks and backer rod, all of approved grade, brand and manufacture, as per the approved

sealant design, within and all around the perimeter for holding glass.

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes,

shapes and profiles, as required as per the site conditions, to seal the gap between the building

structure and all its interfaces with curtain glazing to make it watertight.

(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to

make it watertight, by incorporating principles of pressure equalization, providing suitable gutter

profiles at bottom (if required), making necessary holes of required sizes and of required

numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating

and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other

incidental charges including wastages etc., enabling temporary structures and services, cranes or

cradles etc. as described above and as

specified. The item includes the cost of getting all the structural and functional design including

shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item

also includes the cost of all mock ups at site, cost of all samples of the individual components

for testing in an approved laboratory, field tests on the assembled working structural glazing as

specified, cleaning and protection till the handing over of the building for occupation. In the end,

the Contractor shall provide a water tight structural glazing having all the performance

characteristics etc. all complete as required,

as per the Architectural drawings, as per item description, as specified, as per the approved shop

drawings and as directed by the Engineer- in-Charge.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium

section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel

wire mesh shall be paid for separately under relevant items under this sub- head. However, for

the purpose of payment, only the actual area of structural glazing (including width of grooves)

on the external face shall be measured in sqm. up to two decimal places.

Note:-2. The following performance test are to be conducted on structural glazing system if area

of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by

NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of

Science & Technologies, India. Cost of testing is payable separately.

The NIT approving authority will decide the necessity of testing on the basis of cost of the work,

cost of the test and importance of the work. Performance Testing of Structural glazing system

Tests to be conducted in the NBL Certified laboratories

1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) &

(+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing

limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing

method for a range up to 2000 ml.

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing

method for a range upto 2000 ml

4. Structural Performance Deflection and deformation by static air pressure

test (1.5 times desing wind pressure without any failure) as per ASTME-330-

10 testing method for a range upto 50 mm

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method

for Qualitative test Tests to be conducted on site.

6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall

29 13.43.1 surface: Water thinnable cement primer SQM 1269.00 64.45 ₹ 81,787.04

Providing and applying white cement based putty of average thickness 1 mm, of approved brand

30 13.80 and manufacturer, over the plastered wall surface to prepare the surface even and smooth SQM 787.84 123.85 ₹ 97,573.98

Finishing walls with 100% premium acrylic emulsion paint having VOC less than 50 gm/litre

and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior

31 13.48A.1 paint of required shade (Company depor tinted ) with silicon additives. 13.48A.1 New work SQM 1269.00 154.45 ₹ 195,997.02

(Two or more coats applied @ 1.43 litre / 10 sqm. (ICI/ ASIAN/BERGER/NIPPON/NEROLAC)

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even

32 13.60.1 shade : Two or more coats on new work SQM 787.84 137.85 ₹ 108,603.74

Finishing walls with textured exterior paint of required shade : New work (Two or more coats

33 13.45.1 applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ SQM 29.54 245.00 ₹ 7,238.28

Providing & Applying polymer modified, flexible cementatious negative side waterproofing

coating with elastic waterproofing polymers on

interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of

cementatious waterproofing polymer(dilution

with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution

34 22.23A with water in the ratio of 3:1 ) after Sqm 109.50 522.20 ₹ 57,180.27

scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles

till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2

graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre

35 11.4 per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, SQM 34.25 855.90 ₹ 29,314.38

but excluding the cost of nosing of steps etc. complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved

make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

36 11.41.2 sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white sqm 95.70 1416.65 ₹ 135,573.41

cement and matching pigments etc., complete. Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70

kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg),

37 11.48.2 including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of SQM 52.44 258.65 ₹ 13,563.61

Tile 600x600 mm

Providing and laying tactile tile (for vision impaired persons as per standards) of size

300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of

approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi

modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in

38 16.90 all shapes & patterns including grouting the joints with white cement mixed with matching SQM 8.85 1719.00 ₹ 15,213.15

pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 % and

conforming to I.S. 15622, of approved make, in all colours & shade, in

skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joint with white cement & matching pigments

etc. complete Size of Tile 600x600 mm

Providing and laying flamed finish Granite stone flooring in required design and patterns, in

linear as well as curvillinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement

40 11.55.1 slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all SQM 3.08 2589.90 ₹ 7,976.89

complete as specified and as directed by the Engineer-incharge.a. Flamed finish granite stone

slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath,

parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/

shape, made by table vibratory method using PU mould, laid in required colour & pattern over

50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking

paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,

41 16.91.1 filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing sqm 52.10 932.35 ₹ 48,575.44

and sweeping extra sand. complete all as per direction of Engineer-inCharge.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)

including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or

lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken

floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and fixing stone slab with table rubbed, edges rounded and

polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal

partitions by cutting a chase of appropriate width with chase cutter and

embedding the stone in the chase with epoxy grout or with cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6

mm nominal size) as per direction of Engineer-in-charge and finished

smooth Granite Stone of approved shade

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of

approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%,

Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as

per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all

round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T

of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary

intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600

mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long

8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000

mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre

44 26.27.1 along main ‘T’. The system should rest on periphery walls /partitions with the help of GI Sqm 832.16 2069.90 ₹ 1,722,487.98

perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the

wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S.

screws. The exposed bottom portion of all T-sections used in false ceiling support system shall

be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per

specifications, drawings and as per directions of the engineer-incharge With 16 mm thick

beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium

silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level,

suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @

120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to

get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced

1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum)

sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of

1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm

thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of

size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated

steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl

plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and

laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid,

including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using

G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash

fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm,

spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections

shall be pre-painted with polyster baked paint, for a all heights, as per specifications, drawings

and as directed by Engineer-in-Charge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (

galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum)

sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm

thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to

form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm

made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel

to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles

of approved texture

in the grid including, required cutting/making, opening for services like diffusers, grills, light

fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI

slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long

dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x

0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all

T-sections shall be pre-painted with polyester paint, all complete for all heights as per

specifications, drawings and as directed by Engineer-in-charge, GI Metal Ceiling Lay in

perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick

with 8 mm drop; made of GI sheet having galvanizing of

100 gms/sqm (both sides inclusive) and 20% perforation

area with 1.8 mm dia holes and having NRC (Noise

Reduction Coefficient ) of 0.5, electro statically polyester

powder coated of thickness 60 microns (minimum),

including factory painted after bending and perforation,

and backed with a black Glass fiber acoustical fleece

Supplying chemical emulsion in sealed containers including delivery as specified.

47 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Ltr 826.44 200.90 ₹ 166,031.80

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Treatment of soil under existing floors using chemical emulsion @ one litre

per hole, 300 mm apart including drilling 12 mm diameter holes and plugging

48 2.35.3.1 with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Sq.m 1502.61 256.15 ₹ 384,893.55

Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and fixing false ceiling at all height including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of

120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts

of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9

mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at

450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30

mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

49 12.45.1 centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board Sq.m 12.67 1145.95 ₹ 14,519.19

to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at

230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing compound

in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings for

light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding

the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS:

2095- (Part I) : 2011 (Board with BIS Certification marks)

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x

60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating

not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The

frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will

have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style

of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS

50 9.161 Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame Mtr 6.00 1791.05 ₹ 10,746.30

shall be finished with a approved fire resistant primer or Powder coating of not less than 30

micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing

hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating

confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory

approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical

styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out

of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool

51 9.162 insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing Sq.m 2.88 9736.05 ₹ 28,039.82

hinges of size 100x89x3mm of approved make, including applying a coat of approved fire

resistant primer or powder coating not less than 30 micron etc all complete as per direction of

Engineer-in-charge (panelling to be paid for seperately).

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with

G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size

20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150

mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less

than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all

respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge

with glass of required thickness having 120 minutes of fire resistance both integrity & radiation

control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give

52 9.164 test report/certification of fire glass and the glass should have the stamp showing the value of E, Sq.m 0.07 39995.80 ₹ 2,699.72

EW & EI. The glass shall be tested in approved NABL accredited lab or by any other

accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per

ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size

shall not be more than 1100x2200 mm (w x h) or 2.42 sqm

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch &

53 9.139 Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Nos 1.00 7145.90 ₹ 7,145.90

Engineer- in- charge, all complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door

closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to

80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary

accessories and screws etc. complete.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side

/top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc.

complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars

tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of

approved steel primer, but excluding the cost of other fittings, complete all as per approved

55 10.11.1 design, (sectional weight of only steel members shall be measured for payment). Fixing with Kg 21.00 175.65 ₹ 3,688.65

15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1

Cement : 3 coarse sand : 6 graded stone aggregate 20 mm

Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in

height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and

sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section

made from roll forming process of required length (shape & size according to uPVC profile),

appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM

gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with

single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for

fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash

shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing

hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon sealent over backer rod of required size

57 9.147D.4 and of approved quality, all complete as per approved drawing & direction of Engineer-in- Sq.m 114.08 9642.60 ₹ 1,100,027.81

Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)

Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth

& width of profile shall be acceptable. Three track three panels sliding window with fly proof

S.S wire mesh (Two

nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62

mm both having wall thickness of 2.3 ± 0.2 mm and single

glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)

Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC

58 9.149 casement window with necessary screws etc. complete. Nos 34.00 188.55 ₹ 6,410.70

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators

comprising of uPVC multi-chambered frame and mullion (where ever required) extruded

profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll

forming process of required length (shape & size according to uPVC profile), , uPVC extruded

glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing

frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.

Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall

be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather

proof silicon sealant over backer rod of required size and of approved quality, all complete as

59 9.147B.1 per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and Sq.m 9.60 7249.90 ₹ 69,599.04

silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded

profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both

having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area

upto 0.75 sqm.)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed

shutters for doors, windows and clerestory windows (Area of opening for panel inserts

excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled

60 9.7.7.1 and glazed shutters 25 mm to 40 mm thick : Float glass panes. 4 mm thick glass pane (weight Sq.m 112.27 1897.10 ₹ 212,991.21

not less than 10kg/sqm).

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4

(1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,

61 8.2.2.2 epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss Sq.m 6.78 4425.35 ₹ 30,003.87

finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

platform, vanity counter and similar location in marble/ Granite/ stone work, including

62 8.5 necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. Each 20.00 808.15 ₹ 16,163.00

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and

63 8.4 drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. Mtr 48.00 475.55 ₹ 22,826.40

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer using structural steel etc. as

64 10.25.2 required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 1200.60 142.30 ₹ 170,845.38

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per

manufacturer's specifications including appropriate priming coat, preparation of surface, etc.

65 13.52.1 complete. On steel work Sq.m 15.96 201.70 ₹ 3,219.13

Providing 1400mm x 1110mm cubicle in ladies, gents & PH Toilets with 12mm thick compact

laminate, single standard and plain compact color HPL Board along with 1750mm x 600mm

door, 1775mm heigh divider and accessories of standard aluminium, SS 304 grade, aluminium U

channel, aluminium F channel at corners, aluminium door stopper channel, aluminium top rail,

66 MR SS coat hook, SS privacy thumb turn knob with occupancy indicator, SS spring loaded butt Nos 11.00 36398.31 ₹ 400,381.39

hinges with cover, rubber door stopper lining, SS screws 304 & pvc wall plugs.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed

door comprising of uPVC multi-chambered frame, sash and mullion (where ever required)

extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made

from roll forming process of required length (shape & size according to uPVC profile), uPVC

extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder

coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi

point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100

x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of

frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be

also fusion welded including drilling of holes for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather

proof silicon sealent over backer rod of required size and of approved quality, all complete as

per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and

silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be

accepted but no extra payment on this

account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm &

sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double

glazing bead of appropriate dimension.

Providing and Fixing, uPVC factory made, white Louvers madeof extruded profiles. Profiles of

frames and sash will be mitered cut and fusion welded at all corners including drilling of holes

for fixing hardware and drainage of water etc., making arrangement for fixing of hardware,

EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be included in required

68 MR profile,frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per SQM 22.91 12106.88 ₹ 277,344.30

direction ofEngineer-in-charge. The Rates inclusive of Louvers, Locks, hardware hinges, handle

and fitting etc.

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work

by providing weather silicon sealant over backer rod of approved quality as per

69 21.8.1 architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm Mtr 237.60 85.25 20,256.11

2 MR PEB structure

Towards Design, Detailing, Fabrication & Supply and Erection of Pre Engineered Steel

i) Primary & Secondary members (Columns ,Rafters, Purlins with Mezzanine)

1 MR ii) Structural accessories like Bed Bolts, HSS bolts, Hill side Bolts KG 37556.83 125.08 ₹ 4,697,607.85

iii) 1 Coat of Primer and 1 Coat of Enamel Paint

i) Supply and Fixing of 30 mm thick puff roofing Panel, bottom 0.3 mm & top sheet 0.40 mm

Accessories – Gutter, Trim, Downspout, Flash 0.5mmtk

3 MR MISCELLANEOUS

TOILET signs made of imported clear acrylic of size 127mm x 127mm x5mm thickness . The

room location will be made 0.8mm raised letters with 16mm high. The number will be 37mm

1 MR high, 0.8mm raised letters. The signages will be painted with DuPont paint as per approved NO 3.00 1115.73 ₹ 3,347.18

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL.NO SPECIFICATION UNIT QUANTITY RATE AMOUNT

Electrical/Janitor/Store Room signs made of imported clear acrylic of size 127mm x 127mm

x5mm thickness . The room location will be made 0.8mm raised computer cut with 16mm high.

2 MR Signage will be painted with DuPont paint as per approved shade card. NO 3.00 1115.73 ₹ 3,347.18

Foundation stone and inauguration stone to be get installed with natmecarved in polished garnite

3 MR (Spotless jet black granite) on designated location and size with all necessory base and structure LS 1.00 42184.75 ₹ 42,184.75

upon architectural design in all respect.

GRAND TOTAL ₹ 18,534,633.30

GRAND TOTAL ₹ 18,534,633.30

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL .No CODE(E& Description of Item UNIT QTY RATE AMOUNT

1 CODE ELECTRICAL WORKS DSR NON DSR DSR NON DSR

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed steel

1 1.30 conduit, with modular switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as

Supplying and fixing suitable size GI box with modular plate and cover in front on

3 1.32 surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket Nos 40.00 586.00 23,440.00

outlet and 15/16 A modular switch, connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

4 1.70 FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel

conduit as required.

Supplying and fixing of following sizes of steel conduit along with accessories in

8 1.20 surface/recess including painting in case of surface conduit, or cutting the wall and

making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with

11 1.21 accessories in surface/recess including cutting the wall and making good the same in

case of recessed conduit as required.

B Distribution

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL .No CODE(E& Description of Item UNIT QTY RATE AMOUNT

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel,

MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V,

TPN MCB distribution board of sheet steel, dust protected, duly powder painted,

inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for

mounting MCBs (but without MCBs and incomer ) as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,

residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the

existing MCB DB complete with connections, testing and commissioning etc. as

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature

22 2.10 circuit breaker suitable for inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

25 2.10.5 Triple Pole and Neutral Nos 1.00 1,228.00 1,228.00

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and

earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel

enclosure, on surface or in recess, with chained metal cover for the socket outlet and

complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc.

C LT Cables Supply, laying & End Termination

28 a) Cable Laying

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size on cable tray as required.

31 7.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtr 550.00 45.00 24,750.00

30 7.8.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) Mtr 45.00 92.00 4,140.00

32 b) Cable End Termination

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL .No CODE(E& Description of Item UNIT QTY RATE AMOUNT

Supplying and making end termination with brass compression

33 9.1 gland and aluminium/copper lugs for following size of PVC insulated and PVC -

sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required.

36 c) Cable Supply

37 NS-E-1 Supply and laying 3.5C x 70 Sq.mm A2XFY Cable Mtr 45.00 586.72 26,402.56

38 NS-E-2 Supply and laying4.0C x 25 Sq.mm A2XFY Cable Mtr 45.00 311.74 14,028.37

39 NS-E-3 Supply and laying3.0C x 6 Sq.mm A2XFY Cable Mtr 75.00 172.10 12,907.32

40 NS-E-4 Supply and laying4.0C x 4 Sq.mm A2XFY Cable Mtr 500.00 164.10 82,050.17

41 NS-E-5 Supply and laying3.0C x 4 Sq.mm A2XFY Cable Mtr 15.00 154.28 2,314.13

42 d) Cable End Termination

Supplying and making end termination with brass compression gland and

43 NS-E-6 aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE -

aluminium/copper conductor cable of 1.1 KV grade as required.

44 NS-E-7 3.0C x 6 Sq.mm A2XFY Cable Nos 2.00 602.17 1,204.34

45 NS-E-8 4.0C x 4 Sq.mm A2XFY Cable Nos 48.00 572.49 27,479.49

46 NS-E-9 3.0C x 4 Sq.mm A2XFY Cable Nos 2.00 589.66 1,179.33

D Cable Trays & Cable Trunking for Power & Data

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable

tray (Galvanisation thickness not less than 50 microns) with perforation not more than

47 4.6 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, including Bends, Tee, Cross member,

Reducer etc. as required.

50 4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness Mtr 42.00 716.00 30,072.00

49 4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness Mtr 38.00 963.00 36,594.00

48 4.6.6 450 mm width X 50 mm depth X 2.0 mm thickness Mtr 38.00 1,325.00 50,350.00

Supplying and installing following size of perforated painted with powder coating M.S.

cable trays bends with perforation not more than 17.5%,, joined with connectors,

suspended from the ceiling with M.S. suspenders including bolts & nuts, painting

suspenders etc as required.

53 4.2.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 12.00 1,018.00 12,216.00

52 4.2.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 10.00 1,438.00 14,380.00

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL .No CODE(E& Description of Item UNIT QTY RATE AMOUNT

Supplying and installing following size of perforated painted

with powder coating M.S. cable trays Tee with perforation not

4.3 more than 17.5%, joined with connectors, suspended from the

ceiling with M.S. suspenders including bolts & nuts, painting

suspenders etc as required.

4.3.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 10.00 1,186.00 11,860.00

4.3.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 10.00 1,708.00 17,080.00

Supplying and installing following size of perforated painted with powder coating M.S.

cable trays Cross Member with perforation not more than 17.5%, joined with

connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts,

painting suspenders etc as required.

4.4.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 5.00 1,356.00 6,780.00

4.4.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 5.00 1,979.00 9,895.00

Supplying and installing following size of perforated painted with powder coating M.S.

cable trays Reducer with perforation not more than 17.5%, joined with connectors,

suspended from the ceiling with M.S. suspenders including bolts & nuts, painting

suspenders etc as required.

4.5.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 5.00 1,186.00 5,930.00

4.5.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 5.00 1,718.00 8,590.00

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,

54 5.4 and providing masonry enclosure with cover plate having locking arrangement and Nos 2.00 7,472.00 14,944.00

watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections

etc. as required.

56 NS-E-10 Providing and fixing 25 mm X 3 mm G.I. strip through existing cable tray Mtr 185.00 176.78 32,704.81

Providing and fixing 10 SWG dia bare copper wire on surface or in recess for loop

earthing as required.

F Lightning Protection

Supply and fixing of 8 mm Aluminum Round Conductor as horizontal air terminal for

58 NS-E-12 parapet wall/terrace with the required mounting clamps , cross connectors , expansion Mtr 250.00 104.28 26,070.12

piece and other accessories required as per IEC 62305-3

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL .No CODE(E& Description of Item UNIT QTY RATE AMOUNT

Providing and fixing of test joint suitable for hot dipped galvanized steel tape 30 mm x

3mm and 8mm dia solid round aluminium conductor made of stainless steel SS 304

59 NS-E-13 grade. Conforms to the requirements according to (IS/IEC 62305).with an outdoor Each 7.00 1,682.35 11,776.48

glass-fibre reinforced polycarbonate enclosure having minimum inner dimension of

Providing and laying hot dipped galvanized steel tape 30 mm X3 mm from earth

electrode directly in ground as required.

Supply,installation ,testing and comissioning of maintenance free earthing using 4 mtrs

length,20mm dia 250 microns molecularly copper bonded steel rod, stainless stell

connectors and fasteners for connecting earth strip.The earth electrode shall be filled

with earth enhancing compound (12.5 kg mineral compound / 22.6 kg low resistivity

61 NS-E-15 graphite compound).FRP (UFE FRP)Earth electrode inspection chamber with heavy Each 5.00 43,890.62 219,453.11

duty cover should be used to cover the Earth Rod. The dimension shall be 300mmx

300mmx 300mm with a weight bearing capacity of 15KN.The item shall be inclusive of

installation charges,including digging bore,providing all required accessories like

terminal connector,screw for fixing earth pit cover etc.

G Light Fixtures

Erection of wall bracket /ceiling fittings of all sizes and shapes containing upto two

62 1.35 GLS lamps per fitting, complete with all accessories including connection etc. as Each 67.00 119.00 7,973.00

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact

fluorescent fitting of all types, complete with all accessories and tube etc., including

supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6

mm thick steel conduit upto 30 cm length, painting and wiring the down rods and

connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable

and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods

64 1.44 of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper Each 25.00 213.00 5,325.00

conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing

65 1.25 modular plate switch box including connections but excluding modular plate etc. as Each 34.00 369.00 12,546.00

Digitally signed by

required. DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL .No CODE(E& Description of Item UNIT QTY RATE AMOUNT

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated,

ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.

blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding,

Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery

66 minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, Each 25.00 2,730.00 68,250.00

remote or electronic regulator unit for speed control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise=75 degree C (max.),

insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase

AC Supply, earthing

Supply, Installation, Testing and Commissioning of following light fixtures in True

Ceiling/False Ceiling including making connection to light fixture using single core

flexible cables, suspension cables, connectors, necessary clamps, brackets, screws,

grips, hanging chains, extension rods etc. complete

69 NS-E-18 36W LED Tube Light Nos 5.00 780.63 3,903.15

70 NS-E-19 20W LED Tube Light Nos 18.00 308.83 5,559.01

71 NS-E-20 12W Surface Mount Light Nos 21.00 861.36 18,088.49

72 NS-E-21 10W Recessed Light Nos 21.00 606.34 12,733.13

H Data & Telephone

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/

recessed Steel/ PVC conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed

75 1.18 copper conductor, unarmored telephone cable in the existing surface/ recessed steel/

PVC conduit as required.

Supplying and fixing following modular switch/ socket with modular plate etc. as

78 1.24.6 Telephone socket outlet Nos 13 148.00 1924.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover

plate for modular switches in recess etc. as required.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

SL .No CODE(E& Description of Item UNIT QTY RATE AMOUNT

Supplying and fixing of following sizes of steel conduit along with accessories in

81 1.20 surface/recess including painting in case of surface conduit, or cutting the wall and

making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with

84 1.2 accessories in surface/recess including cutting the wall and making good the same in 0.00

case of recessed conduit as required.

87 NS-E-22 Supply and Installation of RJ45 Information Outlet Jack Nos 26 544.45 14155.57

Supply and Installation of wall mounted 12U Network Rack with cable manager,

powerstrip with socket outlets, cooling fan etc. complete

89 NS-E-24 Supply and Installation of CAT 6, 24P Patch Panel Nos 2 12716.71 25433.43

90 NS-E-25 Supply and Installation of 1 Mtr. Long CAT 6 Patch chord Nos 26 293.40 7628.32

Supply and instlation 20 Pair Telephone Tag Block with Poweder Coated MS

I LT Switch Boards

Providing and fixing following capacity TP&N disconnector fuse

switch unit inside the existing panel board with ISI marked HRC

fuses including drilling holes in cubicle panel, making

connections, etc. as required.

93 NS-E-27 Main Switch Board Nos 1.00 541,412.83 541,412.83

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

BOQ (FIRE Alarm & PA System)

Sl. No Description Unit Qty

CODE Rate (Rs) Amount (Rs.)

A Fire Alarm System DSR NON DSR DSR NON DSR

Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop

modules and capable of supporting not less than 240 devices (including detectors) and

minimum 120 detectors per loop and loop length up to 2 km, network communication

card, minimum 320 character graphics/ LCD display with touch screen or other keypad

and minimum 4000 events history log in the non volatile memory (EPROM), power

supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free

batteries with automatic charger. The panel shall have facility to connect printer to

printout log and facility to have seamless integration with analog/digital voice evacuation

system ( which is part of the schedule of work under SH: PA System) and shall be

complete with all accessories . The panel shall be compatible for IBMS system with open

protocol Bacnet/ Modbus over IP complete as per spec fications ( 2 Loop Panel)

Supplying, installation, testing & commissioning of intelligent analog addressable

photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal

3 17.2.9 detector with rate of rise cum fixed tempreature thermistor complete with base as Nos 1 2,726 2,726

Supplying, installation, testing & commissioning of addressable beam detector with short

4 17.2.12 circuit isolator (inbuilt or seperate) complete with emitter and receiver including Nos 2 74,937 149,874

connections with remote test features etc complete as required

Supplying, installation, testing & commissioning of response indicator on

5 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all connections Nos 5 276 1,380

etc as required.

Supplying, installation, testing & commissioning of addressable manual call point

complete as required

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commissioning of addressable horn cum strobe

complete as required.

Supplying, installation, testing & commissioning of addressable fire control module

complete as required

Supply, Installation, Testing and Commissioning of Addressable Monitor Module to

11 4124 connect NO/NC contacts such as pressure switch, flow switches, fire pump contacts etc. Nos 5 2,985 14,924.06

including Junction Box, Cover Plate and other accessories as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with

12 17.5.2 annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer Mtr 650 173 112,450

sheath complete as required.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

Sl. No Description Unit Qty

CODE Rate (Rs) Amount (Rs.)

Supplying and fixing of following sizes of steel conduit along with accessories in

13 1.20.2 surface/recess including painting in case of surface conduit, or cutting the wall and Mtr 45 256 11,520

making good the same in case of recessed conduit as required 25MM Dia

Supplying and fixing of following sizes of medium class PVC conduit along with

14 1.21.2 accessories in surface/recess including cutting the wall and making good the same in Mtr 50 145 7,250

case of recessed conduit as required 25mm Dia

B Fire Pump & Equipment

Supplying, installation, testing and commissioning of electric driven terrace pump

suitable for automatic operation and consisting of following, complete in all respects, as

required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump

of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to

IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation

on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure,

horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c)

M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as

required. (d) Suitable cement concrete foundation duly plastered and with anti vibration

Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming

to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

2.0 18.8 gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and -

painting with two or more coats of synthetic enamel paint of required shade complete as

required :(Above Ground).

Providing, installation, testing and commissioning of non-return valve of following sizes

3 18.1 confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

4 18.1 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets -

conforming to IS 13095 of following sizes as required :

18.11.5 100mm Nominal dia Nos 2 6,667 13,334

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated

5 18.2 out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless -

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as

Digitally signed by

required. DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

Sl. No Description Unit Qty

CODE Rate (Rs) Amount (Rs.)

Supplying, Installing, testing and commissioning of emergency Start / Stop Push Button

7.0 NS-F1 station weather proof type for Booster pump at pump room terrace level. Rate shall Nos 1 678 678

include MS structural steel supports as required.

C Hydrant System -

Supplying, installing, testing and commissioning of Landing Hydrants comprising of the

8.0 18.9 following in the Fire duct, All hydrant accessories shall be given serial number for -

identification, numbers shall be written in the white paint

Single headed hydrant valves as per IS 5290, made of stainless steel with 63 mm dia

a 18.9.1 instantaneous outlet and 100mm dia flanged inlet, Blank caps , chain and hand wheels Nos 2 7,494 14,988

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and

b 18.16.2 female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as Nos 2 4,448 8,896

required :Stainless Steel (Grade 304)

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal

c 18.18.2 diameter size nozzle conforming to IS 903 suitable for instantaneous connection to Nos 2 1,662 3,324

interconnect hose pipe coupling as required :Stainless Steel (Grade 304)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post

office red,conforming to IS 884 complete with the following as required. 20 mm nominal

internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm

nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the

equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S.

Pipe and socket

Supplying and fixing of fire brigade connection of cast iron body with gun metal male

9.0 18.19.1 instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS No 1 6,742 6,742

pipe connection conforming to IS 904 as required :2 way-100 mm dia M.S. Pipe

Supplying, installing, testing and commissioning of approved make screwed inlet GM

10.0 NS-F2 single acting type 20mm dia. automatic air release valve with suitable size ball valves Nos 1 1,357 1,357

and unions etc. complete.

e NS-F3 Fireman Axe Nos 2 1,357 2,713

M.S. Hose cabinet stand mounted type fabricated out of M.S. sheet of 16 swg. with glass

fronted (4mm thick glass with rubber beeding) door and size of the cabinet shall be

f NS-F4 600mm x 750 mm x 250 mm Quoted rate shall include suitable stand for mounting, all Nos 2 2,442 4,884

fasteners, lockable key, key holder etc, and cabinet shall be powder coated of approved

color both inside and out side.

D Fire Extinguishers

Supplying, installing and commissioning Portable Fire extinguishers of following type &

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

Sl. No Description Unit Qty

CODE Rate (Rs) Amount (Rs.)

Mechanical Foam Stored Pressure type Fire Extinguisher of 9 ltr capacity, refillable

type fitted with internal discharge tube, pressure gauge, squeeze grip, valve with nozzle

and suspension nozzle and suspension bracket/stainless steel stand complete with initial

charge as as per confirming to IS:15683

ABC powder type fire extinguisher of 4 Kgs. Capacity, with initial filling in brand new

cylinder with powder coated finish, fitted with Gun metal union, discharge hose, wall

mounting bracket /stainless steel floor stand with mounting accessories with suitable

signage's etc. complete, confirming to IS:15683

ABC powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new

cylinder with powder coated finish, fitted with Gun metal union, discharge hose, wall

mounting bracket /stainless steel floor stand with mounting accessories with suitable

signage's etc. complete, confirming to IS:15683

Fire bucket stand fabricated by MS angles to install with 4 Nos of buckets and Fire

bucket stand shall be duly painted

1.0 NS-F9 Supplying and installing in position following photoluminescent type of sign boards. -

a. NS-F9A Fire Alarm Call Point Nos 2 570 1,140

b. NS-F9B Fire Extinguisher Nos 10 570 5,699

d NS-F9C Fire Hose Cabinet 2 570 1,140

Supply, Installation, Testing and Commissioing of Electricaly and battery powered LED

Fire Exit Signage Indicating the travel direction and Fire Exit

Supplying and installing in position below listed " FIRE ORDER" signages on 3mm

3.0 NS-F10 thick "Opaque" PVC foam board of computerized cut, PVC Non-reflective self adhesive -

vinyl painted foam board of 60cm x 100cm.

A) alert the security at security room by actuating manual call point located at strategic

B) evacuate the occupants by using fire exits and emergency exits only and assemble at

various assembly points.

C) if possible try to extinguish the fire by using nearest / suitable portable extinguisher or

water from nearest wet riser.

D) be calm and do not give any room from panic, walk, do not run.

E) if you encounter serious difficulty in evacuation, flat and try to attract attention of

Action by security/reception upon receipt of information through fire alarm or fire

detectors or by using public address system.

A) alert the occupants by using public address system.

B) inform fire control through any one of the following phone numbers: 101 /(local

C) refer evacuation plan from evacuating standard people.

D) guide the fire force, on their arrival to the seat of fire.

Digitally signed by

E) in case of the casualties, call ambulance by dialing number…….. DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

Sl. No Description Unit Qty

CODE Rate (Rs) Amount (Rs.)

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

BOQ-Sanitary and Drainage

DESCRIPTION UNIT QTY RATE AMOUNT

CP & Sanitary Fittings DSR NON DSR DSR NON DSR

Providing and fixing white vitreous china extended wall mounting water closet of

size 780x370x690 mm of approved shape including providing & fixing white

1 17.78 vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre Nos 12 13036.55 156438.60

(adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts

and gasket etc complete.

Providing and fixing white vitreous china battery based infrared sensor operated

urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water

2 17.80 (250 ml & 500 ml consumption), having water inlet from back side, including Nos 4 7004.45 28017.80

fixing to wall with suitable brackets all as per manufacturers specification and

direction of Engineer-in-charge.

3 17.34.1 Providing and fixing toilet paper holder C.P. brass Nos 1 680.8 680.80

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P.

brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap

4 17.11.2 with necessary C.P. brass unions complete, including painting of fittings and Nos 12 5610.85 67330.20

brackets, cutting and making good the wall wherever required : Size 600x450x200

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply including all CPVC plain & brass

18.9 threaded fittings This includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of joints complete as per direction of

Engineer in Charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

approved quality conforming to IS:8931

18.53.1 15mm nominal bore each 12 500.35 6004.20

Supply, Installation, Testing and Commissioning stainless steel vertical swing

8 NS-1 grab bar, right angled fixed grab bar and a straight fixed grab bar (For Nos 1 13633.20 13633.20

Differentially Abled Challenged / Disable toilet)

Supplying, Installation, Testing and Commissioing of 15mm CP health / Ablution

9 NS-2 faucet of approved make with necessary CP flexible hose, Nozzle, 15mm CP Angle Nos 12 1632.15 19585.78

Valve, CP Wall Flange etc. including all necessary accessories complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,

9 17.7 32 mm C.P. brass waste of standard pattern, including painting of fittings and

brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.

brass pillar taps

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and Digitally signed by

10 17.71 112 mm distance from wall of standard shape with bracket of the same materials each 5 146.30

731.50 DEEPAK KUMAR MEHRA

with snap fittings of approved quality and colour, weighing not less than 105 gms. KUMAR MEHRA Date: 2023.01.16 21:02:34

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and fixing PTMT towel rail complete with brackets fixed to wooden

11 17.73 cleats with CP brass screws with concealed fittings arrangement of approved

quality and colour.

450 mm long towel rail with total length of 495 mm, 78 mm wide and effective

height of 88 mm, weighing not less than 170 gms

B Soil, Waste and Rain Water Pipes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

12 12.41 conforming to IS : 13592 Type A, including jointing with seal ring conforming to

IS : 5382, leaving 10 mm gap for thermal expansion,

(i) Single socketed pipes.

12.41.1 75 mm diameter metre 10 79.80 798.00

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592

Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm

gap for thermal expansion.

12.42.1 Coupler

12.42.3 Single tee with door

Supplying, Fixing, Testing and Commissioing of PVC Rain Water pipes

conforming to IS-13592 and IS 14735 (SWR Class A) with all fittings like shoes,

bends fixed in the pipe shafts (ducts) including suitable GI

14 NS-3 Brackets/Supports/Clamps/Grips/Anchor Fastners/Bolts/Hangers/Washers etc.

complete. Pipes 200mm and above shall be UPVC Pressure pipes confirming to IS

4985:2000, 6 Kg/cm2 with Solvent Joints inclusive of all necessary specials like

benbs, tees, offsets, doorbends, junctions, cowls etc., complete.

Providing and fixing trap of self cleansing design with screwed down or hinged

Digitally signed by

16 17.6 grating with or without vent arm complete, including cost of cutting and making DEEPAK DEEPAK KUMAR MEHRA

good the walls and floors : KUMAR MEHRA Date: 2023.01.16 21:02:34

17.60.2 100 mm inlet and 75 mm outlet IST

DESCRIPTION UNIT QTY RATE AMOUNT

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per

Providing and fixing 100mm dia Cleanout with Spigot, with SS 304 Square Frame

& Round Frame with Flat Round Cover with Rubber Seal & SS Screw including

cost and conveyance of all materials, labour charges, sundries etc complete as

directed by the Engineer in charge at all levels.

Suppl, Fixing, Testing and Commissioing of PVC Soil, Waste and Vent pipes

(SWR) confirming to IS-13592 and IS 14735, Type B with solvent joint inclusive

of all necessary specials laid under earth etc complete. Pipes shall be laid in trench

excavated with compact earth base and laid in slope with design invert levels as per

the approved drawing. The quoted rate should include necessary supports and

concrete haunch at regular intervals and where ever required and filling back

excavated trench with good quality sand on side, bottom and top surface of pipe

with all leads and lifts without damaging pipes.

Supply, Fixing, Testing and Commissioing of PVC pressure pipes (6Kg/Sq.cm.)

23 NS-6 confirming to IS-4985 for pumping sewerage from sewage sump to STP with

solvent cement joints, including all the fittings, laid under ground etc. complete.

C Rain Water & Storm Water Drainage 0.00

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

DESCRIPTION UNIT QTY RATE AMOUNT

Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse

sand ) with R.C.C. top slab with 1:1.5:3 mix (1cement : 1.5 coarse sand (zone-III) :

3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1

cement : 4coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal

size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse

sand) finished with floating coat of neat cement and making channels in cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size) finished with a floating coat of neat cement complete as per standard design :

Inside size 120x90 cm and 90 cm deep including C.I. cover

with frame (medium duty) 500 mm internal diameter, total weight of cover and

frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)

: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Suppl, Fixing, Testing and Commissioing of PVC Soil, Waste and Vent pipes

(SWR) confirming to IS-13592 and IS 14735, Type B with solvent joint inclusive

of all necessary specials laid under earth etc complete. Pipes shall be laid in trench

excavated with compact earth base and laid in slope with design invert levels as per

the approved drawing. The quoted rate should include necessary supports and

concrete haunch at regular intervals and where ever required and filling back

excavated trench with good quality sand on side, bottom and top surface of pipe

with all leads and lifts without damaging pipes.

Supply, Installation, Testing and Commissioing of PVC foam core UPVC selfit

pipes confirming to IS 16098:1, Class SN 8, inclusive of all necessary specials laid

under earth complete. Pipes shall be laid in trench excavated with compact earth

base and laid in slope with design invert levels as per the approved drawing. The

quoted rate should include necessary supports and concrete haunch at regular

intervals and where ever required, filling back excavated trench with good quality

sand on side, bottom and top surface of pipe with all leads and lifts without

damaging pipes.

D Water Supply Pipes

Earth work in excavation by mechanical means (Hydraulic excavator)/manual

means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on

plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m,

disposed earth to be levelled and neatly dressed, All kinds of soil

2.6.1 Depth upto 1.5 Mtr. Cub. Mtr 50 205.45 10272.50

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

DESCRIPTION UNIT QTY RATE AMOUNT

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes

32 18.8.0 jointing of pipes & fittings with one step CPVC solvent cement and the cost of 0.00

cutting chases and making good the same including testing of joints complete as

per direction of Engineer in Charge. Concealed work, including cutting chases and

making good the walls etc.

Providing and Fixing Ball Valves (Brass) of approved quality, High or low

pressure, with plastics floats complete:

Supply, Testing and Commissioing of approved make PN10 GM Non-Return

40 18.19.0 Valve conforming to relevant IS specifications with unions, flanges, nut and bolts 0.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step CPVC solvent cement and

testing of joints complete as per direction of Engineer in Charge. Internal work -

Exposed on wall

Supply, Installation, Testing & Commissioning approved make CPVC Schedule-

40 pipes and SCH-80 fittings confirming to ASTM F-441/ IS 15778 with solvent

cement joints, specials such as tees, elbows,checknuts, unions, flanges, nipples, etc

, including cutting, fixing on walls inside shafts etc., as per drawing. etc., complete.

Rate quoted shall include necessary GI Brackets/Supports/Clamps/Grips/Anchor

Fastners/Bolts/Hangers/Washers etc. complete.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34

DESCRIPTION UNIT QTY RATE AMOUNT

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse

sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III)

: 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1

cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size),

inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)

19 19.7.2.2 finished with floating coat of neat cement and making channels in cement concrete Nos 3 24077.30 72231.90

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement complete as per standard design :Inside

size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)

455x610 mm internal dimensions, total weight of cover and frame to be not less

than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I.

grating brick masonry chamber with water tight C.I. cover with frame of 300 x300

mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not

less than 2.70 kg as per standard design:

19.4.1 100x100 mm size P type

19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 3 2453.55 7360.65

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in

21 19.27 cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast

R.C.C. horizontal grating with frame complete as per standard design :

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 3 5589.45 16768.35

Providing and Fixing Ball Valves (Brass) of approved quality, High or low

pressure, with plastics floats complete:

Supply, Installation, Testing and Commissioing of PN10 CI Butterfly valves with

NS-11 standard lever conforming to relavant IS specifications with necessary connecting 0.00

fittngs like flanges ,nuts and bolts etc., complete.

Supply, Testing and Commissioing of approved make PN16 GM Float Valve

NS-13 conforming to relevant IS specifications with unions, flanges, nut and bolts etc. 0.00

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.01.16 21:02:34