8515 REPAIR TO COMPOUND WALL FENCING GATE AND OTHER CONNECTED WORKS AT CERTAIN 4 RMC NO 01 LINE PERSONAL LINE AND BALANCE AREA UNDER AGE B R III OF GE SOUTH PUNE

Amount

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks including dismantling of old existing brick work or stone boulders or PCC block masonary built in cement mortar etc. complete all as specified and directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in hard / dense soil complete all as specified and as directed.

Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

Returning, filling in hard / dense soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, fixed to walls / under floor / as in rain water pipe / weep holes, complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed blocks for embedding hold fasts / grouting angle iron posts etc. complete all as specified and directed.

M & L for 10 mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces of walls, surface finished even and smooth with out using extra cement including taking down of old existing plaster complete all as specified and as directed.

M&L for broken glass coping in cement mortar 1:3 on top of walls including removing rubbish off the premises, complete all as specified and directed.

M&L for applying two coats cement base paint (snowcem) over a coat of alkalai resistant primer on new walls surfaces, including preparation of surface of walls, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes including demolition of old existing PCC of any type in floors / paving n. exc. 15 cm thick and removing of demolished materials exceeding 50 m from the starting point, complete all as specified and directed.

S&F chequered cement concrete tile 300x300x25 mm thick, glossy finish / rubber moulded, set and jointed in neat cement slurry and pointed in grey cement & pigment laid over and including 20mm thick screed bed in cement mortar 1:6 including dismantling of old unserviceable stone slab / tiles fixed in any position, complete all as specified and directed.

M&L for providing and laying 60mm thick concrete paver block of M-35 grade with approved colour, factory made chamfered edge, rubber moulded / glossy finish, design & pattern as in foot path, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling of old unserviceable stone slabs / tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed

Dismantaling fencing wire mesh, any type, complete all as specified and directed.

Dismantling posts & struts of any type, embeded in concrete, any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete / base of fencing posts, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles, complete all as specified and directed.

M&L for mild steel framed work conforming to Fe-410-W(Gde E-250) quality B as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running railsand guides) and hanging, also fastening and fixing complete all as specified and directed.

Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work conforming to Fe-410-W(Gde E-250) quality B, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbes at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

S & F of mild steel screw bolt dia of shank 11 to 15 mm (machine made) exc. 5 but n. exc. 10 cm in length, with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square etc. complete all as specified and directed.

Supply only chain link mild steel galvanised fencing with line wire 50x50mm mesh size, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc, complete all as specified and directed.

M&L for round bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including MS Wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd

M/s.BAJRANG CONSTRUCTION

SARATH ENTERPRISES

Agarwal Agencies

PRASHANT CONSTRUCTION

Suma Construction

G M CONSTRUCTION COMPANY