REPAIRS TO FLOORING, PLASTERING, JOINERY TO CERTAIN OMQ AND GJ AREA AT AF STATION TAMBARAM

Amount

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish of the premises all as specified and as directed.

Demolition of unreinforced cement concrete in pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L Non skid ceramic coloured tiles 6-7 mm thick (square/rectangular) area of each tile exc 0.06sqm but not exc 0.11Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed plaster in CM 1:6 all as specified and directed

M & L glazed ceramic coloured tiles of size 300x450x7 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors ,area of each tile exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and directed.

All as per item No 5 but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed.

M&L for vitrified ceramic coloured tiles light shade 10 mm thick (square / rectengular) polished area of each tile n exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1 :4 in floors etc complete all as specified and as directed.

All as per item No 7 but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed

M&L Machine cut kota stone slab flooring 20 -25 mm thick over cement screed based laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polish complete including 20 mm screed bed layed with CM 1 :4 etc complete all as specified and as directed.

M & L for kota stone salb 20-25 mm thick in riser of steps,skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polish complete including 15 mm thick screed bed in CM 1 :4 in floors etc complete all as specified and as directed.

Taking down old cement plaster including racking out joint hacking for keys and scrubbing down with water on wall/ceiling

M&L Rendering 15mm thick on brick/ concrete surfaces with cement mortar 1:6 finished even and smooth but without using extra cement all as specified and as directed

M&L Preparation of New plastered surfaces and applying three coat of white wash complete all as specified and directed

M&L Preparation of newly plastered wall surfaces and applying two coats of cement based paint complete all as specified and as directed

M&L Rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and as directed

M&L Preparing newly plastered surfaces and applying three coats of white on ceiling / facia complete all as specified and as directed.

Taking down chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and as directed.

All as per item No 17 above but area exc 1.5 Sqm & not exc 4 Sqm

Taking down shutters of any description of area exc 1Sqm & not exc 2 Sqm each all as specified and as directed.

S&F 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint all as specified and as directed.

S&F 2nd class Hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

S&F 2nd class hard wood plain framed panelled shutter 30mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers of ply wood commercial type all as specified and as directed.

S&F flush shutter 30mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides all as specified and as directed.

Taking down PVC chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style & rails with suitable PVC sheet beading, and jointed together with solvent cement,supplying & fixing in the frame at site as per specification and drawing all as specified and as directed.

S&F 100 mm long stainless steel butt hinges for PVC doors

S&F Extruded aluminum alloy with galvanised MS hinge pin anodised of size 100mm type B-21

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm

S&F in floor door stopper 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring in floors.

S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast alluminium alloy of size 250 mm

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L for framed work such as grill, grating, guard bars etc. Grade confirming to Fe-290 Gde E-165 all as specified and directed.

Dismantling of Mild steel works such as grills, gratings,guard bars of any description all as specified and directed.

M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F Stainless steel wire mesh of nominal dia of wire 0.36mm and average width of aperture 1.14mm & fixed with stainless steel wire staples including wooden fillets/beadings, screws etc complete all as specified and as directed

S&F in repairs Stainless steel wire mesh of nominal dia of wire 0.36mm and average width of aperture 1.140mm including wooden fillets/beadings, screws etc complete all as specified and as directed

Hacking out old broken glasses any thickness size, quality or description from steel/wooden frames fixed with putty or with beads all as specified and directed.

S&F 4mm thick plain ordinary glass fixed in squares not exc 0.5 Sqm in each panes with wooden beading or glazing putty all as specified and directed.

S&F in repair mortice lock of mild steel vertical type of size 150mm 6 Lever all as specified and directed.

S&F in repairs door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kG all as specified and directed.

S&F in repairs Aluminium alloy tubular 20mm external dia for curtain rod in pelmet box, curtain rods etc all as specified and directed.

S&F in repairs Aluminium Brackets for item No 43 above all as specified and directed.

S&F in repair aluminium powder coated grills (pattern DG-104) weight of 2.00 to 3.20 Kg/Sqm for windows, ventilators, etc including jointing, cleats etc and fixed with medium screws into walls / frame work etc complete all as specified and as directed

S&F for Powder coated for aluminium Powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S&F for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed

S&F for Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. complete all as specified and as directed

S&F for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle all as specified and as directed.

S & F in repairs corner galss of 5.5 mm thick sheet glass with stainless steel brakets complete all as specified.

S&F in repairs 18/19 mm thick plywood, grade BWP, type BB fixed in cupboard shelves, partitions etc., including wooden beading/ fillets all round etc., complete all as specified and as directed.

S&F in repair pre laminated particle board 18/19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in pelmet boxes all as specified and as directed

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised all as specified and as directed

Dismantling Plain or corrugated sheeting, any gauge, thickness, including Nainital or similar pattern roof covering all as specified and as directed

M & L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed

M & L Pre- painted galvatume aluminum zinc coating GI based plane steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed

Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and as directed

S&F in repairs mild steel, plain black sheet 0.80 mm thick in wall cladding, steel gates and similar work cut to size, holes punched; including round headed screws, clout nails or rivets and fited to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required all as specified and as directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, conforming to Fe-290 (Gde E-165) all as specified and as directed

S&F in repairs steel windows with side hung shutters including box type hinges steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and as directed

S&F in repairs steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and as directed

M&L preparation of old decorated surfaces of walls pilasters including cornices and applying one coat of white wash evenly complete all as specified and as directed.

M&L preparation of old decorated surfaces of walls pilasters including cornices and applying two coat of white wash evenly complete all as specified and as directed.

M&L preparation of old decorated surfaces of ceiling and applying one coat of white wash evenly complete all as specified and as directed.

M&L preparation of old decorated surfaces of walls, pilasters including cornices and applying One coat of Oil Bound Distemper washable complete all as specified and as directed.

M&L preparation of old decorated surfaces of wood work exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old surfaces (plastered/unplastered) of walls/pillars /cornices by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc including applying white cement based putty where required for filling to depressions to make the surface even and smooth after preparing the surfaces applying one coat of weather proof exterior emulsion paint as per existing or as approved tint/colour complete all as specified and as directed

M&L preparation of old decorated steel surfaces exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Complete removal of existing treatment of wall, including Washing, rubbing down and stopping of distempered and painted surfaces of pilasters, including cornices and applying two coats of Oil Bound Distemper over a coat of alkali resistance primer and wall care putty including preparation of surfaces all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

S & F for for providing gypsum board flse ceiling using 9 mm thick gypsum board tiles of size 60 m X 60 cm with aluminium laminate finish on one side and vinyl laminate finishon other side fixed with screw on powder coated aluminium sections grid frame work using 'T' and angle sections made out of 0.50 m thick required as in main member,seconndary members permeter angle section including provision of GI wire suspender of size not less than 4 mm dia fixed to roof members at the rate of 1200mm C/C both ways etc complete all as specified and as directed. ( Note: The unit rate quoted shall be deemed to include the cost of taking down and refixing of the electrical fittingssuch as ceiling fan, light fittings etc and safecustody of same till refixing)

S&F 18/19 mmm thick colour solid PVC prelaminated board fixed to timber fram work as in cup board shutter/shelves, pelmet box and similar items fixd in repair complete all as specified and directed.

S&F Auto closing hinges 35mm of 0 Crank (KH-001 or 8 Crank (KH-002) openable at 110 degree for kitchen cabinet shutters all as specified and directed.

S&F Ball bearing runners 45mm Telescopic (KTS-20) full extension load capacity 50 Kgs fixed in repair complete as specified and diected.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with (storage basket) pull out type for large utensils size 480x500x150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with (Cup and Saucers Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with (Plate Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with ( Cutlery Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with ( Grain Trolley Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with ( Bottle Pull out Basket)) pull out type Two self,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

Taking down of steel tubing and connections complete on walls floors etc for 15mm bore of pipe.

All as per item No. 82 above but bore of pipe in 20mm dia.

All as per item No. 82 above but bore of pipe in 25mm dia.

S&F Galvanised iron medium graded tubes with all fittings and fixed complete on walls ceiling or laid in floors etc,15mm in dia all as specified and directed.

All as per item No. 85 above but bore of pipe 20 mm all as specified and directed.

All as per item No. 85 above but bore of pipe 25 mm all as specified and directed.

S&F 3-Layer PP-R (Polypropylener random copolymer) 16 mm (outer dia) concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, all specified and as directed.

All as per item No 88 above but 20mm outer dia pipe

All as per item No 88 above but 25mm outer dia pipe

S&F in repairs 15 mm bore CP Bib tap cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule all specified and as directed.

S&F in repairs 15 mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes all specified and as directed.

S&F in repairs 15mm dia chromium plated fancy type angle/stop cock cast copper alloy screwed down high pressure fancy screwed both ends for pipe or for union all specified and as directed.

S&F in repairs 15 mm dia Bip tap standard PTMT any colour screwed for iron pipe (Min weight 90 gms) all specified and as directed.

S&F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) all specified and as directed.

S&F in repairs 15mm dia Angle/Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) all specified and as directed.

S&F in repairs PVC over head tank cover for any capacity all specified and as directed.

S&F in repairs Waste coupling of PTMT (half or full threaded) 32mm bore (Min wt 45gms) all specified and as directed.

S&F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends all specified and as directed.

S&F in repairs 125mm size brass chromium plated shower rose with swivel joints and shower arm complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges all specified and as directed.

Disconnecting existing tanks and S&F new PVC sintex water tank of capacity exc 250ltrs but n.exc 500ltrs Ltrs including hoisting and positioning complete all specified and as directed.

All as per item No. 103 above but 1000 Ltrs.

Supply and fixing in repair PVC Water closet Seat Cover white or Black closed pattern with flat bottom and cover with PVC, aluminium or MS cromium plated hinge devises etc all as specified and as directed.

S&F in repairs PVC valve less syphonic action type flushing cistern 10 litres capacity, high/low level with inlet ball valve, float and handle including brackets all specified and as directed.

S&F in repairs Ball valves of High pressure of PTMT with epoxy coated with aluminum rod & high density plastic ball 20mm inside flushing cistern( min wt - 142gms)

All as per item No.107 above, but 25mm dia (min wt - 455 gms)

Cleaning of tank by removing of all scale and dirts & etc, from tank and mouth of circutary pipe etc exc 500 ltr and not exc 1000 Ltrs including writing of date of cleaning and due date of cleaning on each tank all specified and as directed.

All as per item No.109 above but exc 1000 ltr but not exc 2000 ltrs

S&F in repairs vitreous china urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) all specified and as directed.

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and unionfor discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all specified and as directed.

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low / high level flushing cistern all specified and as directed.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe (min weight 40 gms) all specified and as directed.

Taking down rain water pipes, waste/soil pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to stores all specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors all specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors all specified and as directed.

S&F 75mm dia PVC (SWR) bend without access door

S&F 110mm dia PVC (SWR) bend without access door

S&F 75mm dia PVC (SWR) bend with access door

S&F 110mm dia PVC (SWR) bend with access door

S&F in repair viterous china WHB flat back of size 550x400mm incl GI Brackets, CP brass waste coupling with check nut and washers of suitable to be complete all specified and as directed.

S&F In repair viterous china water closet pedestal pattern with P or S trap incl connection to flush and water pipe etc complete all specified and as directed.

S&F in repairs Vitreous china squatting pan orissa pattern size 500x440mm white with integral foot rest (excluding flushing cistern and flush pipe ) and making good to floor all specified and as directed.

S&F in repairs toilet paper holder of brass, chromium plated fixed to walls with chromium plated brass screws all specified and as directed.

S&F in repairs brass, chromium plated soap dish fixed to walls with chromium plated brass screws

S&F in repairs chromium plated urinal spreader

Supply and fixing in repair CP health faucet of 1 Mtr long CP flexable tube with necessary fittings all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 0.9 mm thick kitchen or labourator with plug washers,and waste pipe, incl bedding in CM to drwaf wall or incl fixing cntilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm all as specified and directed.

Demolition of brick work built in CM including all quoins arches pillers etc all as specified and directed.

M&L Brickwork with using fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cement mortar 1:4 complete all as specified and directed.

M/L rendering 15 mm thick in CM 1:6 over brick surfaces finished even and fair without using extra cement all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying three coats of white wash all as specified and directed.

S&F in repairs Internal componants part (except PVC body) of PVC Flushing cistern 10 Ltr capacity incl ball valve etc complete (Flush Kit) all as specified and directed.

DELTA CONSTRUCTIONS

M/s KM Marimuthu Achary