864/WS-56/2021-22

Amount

B/R Works Demolition of cement concrete of any description and in any position not otherwise specifically provided for and disposing of where directed complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0, (using 12.5 mm graded crushed stone aggregate) as in floors complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on brick or concrete walls surfaces (internal) other than fair faces finished even & smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on brick or concrete walls surfaces (external) finished even & smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering in CM (1:3) on concrete surfaces finished even & smooth without using extra cement as in ceiling complete all as specified and directed.

M&L for first quality Non skid joint free coloured ceramic tiles 7 to 8mm thick (Square/ Rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile incl laid over screed bed 15 mm thick in CM (1:4) complete all as specified and directed.

M&L for Glazed coloured ceramic tiles 350x250x7/ 450x350x7mm thick in vertical surfaces etc set and jointed in neat cement slurry and pointed in White or coloured cement to match shade of tile incl fixed over 10 mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick incl laid over 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F in repairs bib taps (ISI marked), 15mm bore, cast copper alloy, chromium plated, with crutch or butter fly handle, screwed down for iron pipe complete all as specified and directed.

S&F in repairs angular stop cock cast copper alloy chromium plated fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15 mm bore pipe complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), light coloured including fixing bolts, PVC seat cover and mild steel chromium plated hinging device, flush pipe, PVC valve less, symphonic action type, flushing cistern 10 ltrs capacity, low level, light coloured, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests with PVC 'P'/ 'S' bend including PVC valve less, symphonic action type, flushing cistern 10 ltrs capacity, low level, light coloured, with inlet, ball valve, float and handle complete all as specified and directed.

S&F in repairs Vitreous china, white, urinal, full stall type including providing PTMT spreader and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long screws, pointing around urinal back in cement connecting water pipe and waste pipe complete all as specified and directed.

S&F in repairs Vitreous china, white, urinal, flat back, size 465 x 355 x 265 mm with grating and union for discharge pipe, 32 mm waste coupling and waste pipe including providing and fixing plugs bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repairs WHB vitreous china 550x400mm, 'Flat back or angle back type', coloured including cutting for & pinning in ends of brackets or existing stand including PVC waste pipe and fitting 32mm complete all as specified and directed.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore and fixed complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm dia floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Vitreous china urinal partition white of size 310 x 700 mm complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

S&F figured glass 3 mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore complete all as specified and directed.

S&F 3 layar PP-R concealed pipes 20mm dia SDR 7.4 (PN-16) UV stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threated polypropylene random fittings fixed complete to walls, cellings or in floors etc complete all as specified and directed.

S&F in repairs 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors/ fixed to wall complete all as specified and directed.

Ditto all as per serial item No. 29.00 described here-in-before but 75 mm dia

S&F in repairs 110 mm dia PVC (SWR) bends complete all as specified and directed.

Ditto all as per serial item No. 31.00 described here-in-before but 75 mm dia

S&F in repairs 75 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

M&L for plain cement concrete (1:7:12) type F2 (using 40mm graded crushed stone aggregate) as in foundation/as in filling of sunken floor etc. complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:3) on concrete surfaces with water proofing compound finished even & smooth without using extra cement as in sunken floor complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over one coat of hot bitumen grade 85/25 @ 1.2 Kg/Sqm over primed surface with bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced complete all as specified and directed. Four courses roof treatment consist of as under :-

One coat of bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced on concrete/plastered surfaces

One coat of hot bitumen grade 85/25 @ 1.2 Kg/Sqm over primed surfaces

APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over one coat of hot bitumen Note : (a) Over lap longitudinally not less than 75mm and horizontally not less than 150mm (b) Joint shall be sealed with Gas torch application (c) Cost of above effects shall be included in the quoted rates. Nothing shall be extra paid to contractor on this account.

One coat of hot bitumen grade 85/25 @ 1.2 Kg/Sqm over APP membrane

M&L for complete removal of existing treatment on surfaces of walls including rubbing the surfaces with sand paper (emery) to achieve uniform surfaces and applying two coat of weather proof exterior acrylic emulsion paint anti fungal over a coat of alkali resistant primer over 3 mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of weather proof exterior acrylic emulsion paint anti fungal over a coat of alkali resistant primer over 3 mm thick wall care putty complete all as specified and directed

M&L for complete removal of existing treatment on surfaces of walls including rubbing the surfaces with sand paper (emery) to achieve uniform surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer over 3 mm thick wall care putty, complete all as specified and directed

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer over 3 mm thick wall care putty complete all as specified and directed

M&L for complete removal of existing treatment on surfaces of ceiling including rubbing the surfaces with sand paper (emery) to achieve uniform surfaces and apply two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new undecorated plastered/unplastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4.0 Sqm each complete all as specified and directed.

S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

S&F pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

M&L for cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in filling of pressed steel frame and hold fast block etc complete all as specified and as directed.

S&F 35 mm thick second class hard wood glazed and skeleton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Pt-I (2009) Sec 8 Clause 8.20(a) complete all as specified and as directed.

S&F 35mm thick second class hard wood plain framed, panelled shutter (two or more panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) or clause 8.24(a) of SSR Part - I (2009), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded single side prelam PVC sheet used instead of plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge, PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawings complete all as specified and as directed.

M&L for preparation of new or previously untreated wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wood based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long complete all as specified and directed.

Supply only butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

S&F butt hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, for built in cupboards complete all as specified and directed.

Dismantling boarding, any description fixed in any position with nails complete all as specified and directed.

S&F 6 mm thick plywood with 5 No. of ply grade BWR type BB fixed with screws to timber frame work complete all as specified and as directed.

M&L for plain fillets second class hardwood sectional area exc 3 & n exc 6 Sqcm bull nosed, splayed chamfered or rounded on one edge or face in section clean sawn screwed with nails or brads complete all as specified and as directed.

M&L for 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work. complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position unframed work complete all as specified and as directed.

M&L for second class hardwood clean sawn timber in scantling complete all as specified and as directed.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30mm wide flap when open complete all as specified and directed.

S&F 100 mm size aluminium anodised hasp and staple, safety type, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc. complete all as specified and directed.

M&L for 18-20 mm thick Kota stone slabs as in vertical surfaces like dado, skirting, riser over 10mm thick in CM (1:3) set & joined in neat cement slurry and pointed in coloured cement to match shade of stone incl rubbing & polishing complete all as specified and directed.

M&L for 18-20 mm thick granite stone slabs laid over 15 mm thick screed bed in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & polishing complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles over 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

S&F stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F stainless steel plate rack (ISI marked) of size 750 x 600 x 300mm made cut of 1.00mm thick stainless steel of first quality complete all as specified and directed.

S&F in repair fancy type SS curtain rod 25mm dia with bracket, knobs, rings @ 10cm c/c etc complete all as directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Ditto all as per serial item No. 79.00 described here-in-before but without glazing bars

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of red oxide or zinc chrome primer complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint (ordinary tint) on steel surface of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

S&F figured glass 4 mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3mm sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each plane complete all as specified and directed.

S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection etc complete all as specified and as directed.

M&L for preparation of new plastered or un plastered wall surfaces and applying two coats of oil bound distemper over 3 mm thick wall care Putty complete all as specified and directed.

M&L for preparation of new plastered or un plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed

M&L for preparation of old decorated or undecorated ceiling surfaces and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new plastered or un plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces and preparation and applying two coat of cement base paint complete all as specified and directed.

Ditto all as per serial item No. 27.00 described here-in-before but 20 mm dia

Ditto all as per serial item No. 28.00 described here-in-before but 25 mm dia

S&F in repair fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 25 mm size fitted to steel pipe or union. complete all as specified and directed.

S&F towel ring/rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 W (Gde E-250) Quality A complete all as specified and directed.

Cutting holes in brick walls (exc half brick but n.exc one brick thick) built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as required complete all as specified and as directed. Note : Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall

Dismantling of water tanks exc 250 & n exc 500 ltr capacity complete all as specified and directed.

S&F rotational molded polyethylene water storage tank 500 ltr capacity (Cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I (2009) complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball, screwed for iron pipe and fixed (Minimum weight -210gms) 20mm bore complete all as specified and as directed.

S&F in repair stop valve, cast copper alloy with crutch or butterfly handles, screwed both ends for 20mm bore iron pipe or brass ferrule complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/ semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge/roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm bore dia Branch pieces, double (double Y) equal or unequal complete all as specified and directed.

S&F in repairs PVC connections 15 mm dia with PTMT nuts of length 450 mm complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L for lagging to 20 mm dia pipes used in internal water supply or plumbing all round with 25 mm thick bonded mineral wool preformed 'SNAP ON' pipes sections of density 144 Kg/Cum conforming to IS 9842 with chicken wire netting 25 gauge 20 mesh with 0.01 mm thick aluminium foil complete all as specified and directed.

Ditto all as per serial item No. 112 described here-in-before but 25 mm dia pipe

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 meter in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exe 25 cm thick complete all as specified and directed.

Removing excavated materials (soils) to a distance exc 250m but not exc 500 M and depositing where directed complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar internal dia of pipe of any dia complete all as specified and directed.

S&F 150mm bore Reinforced cement concrete pipes class NP2 laid and jointed complete with collars in trenches complete all as specified and directed.

Ditto all as per serial item No. 118 described here-in-before but 200 mm dia pipe

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipes in PCC (1:3:6) types C-2 (using 40mm graded crushed stone aggregates) including cradles for 150mm bore of pipes complete all as specified and directed.

Ditto all as per serial item No. 120 described here-in-before but 200 mm dia pipe

M&L for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for RCC (Nominal mix) (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and column in floors roof landings balconies canopies deck slabs and in selves and the like complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe 150 mm bore and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 Section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Ditto all as per serial item No. 125.00 described here-in-before but 200 mm bore dia

M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in coping including weathering slightly rounded or chamfered angles and throating as directed and including necessary form work required complete all as specified and directed.

Demolition cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 60mm thick Machine pressed factory made Precast cement concrete interlocking paver blocks with using grey cement and no pigment of Grade M-35 of any size & shape confirming to IS 15658-2006 as directed such as I-shape, Uni, Octagonal, Three-X, Dumble, Zig Zag etc., laid over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for 40 mm thick cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in floors complete all as specified and directed.

M&L for Pre-cast cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in blocks of kerb stone exc 10cm in width and set in CM (1:4) complete all as specified and directed.

E/M Works Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power) including fittings complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing complete all as specified and directed.

M&L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke (FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface/concealed conduit not less than 20 mm dia, clip, with suitable MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint including earth dolly with 3 mm thick plastic laminated hylem sheet top cover of approved colours including 1.50 sqmm green solid copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the following :-

One light/fan point controlled by one, one way switch

One 3/5 pin 5 Amp socket outlet point controlled by one, one way switch on independent board.

One 3/5 pin 5 Amp socket outlet point controlled by one, one way switch on same board.

One bell point controlled by one, one way switch

Ditto all as per serial item No. 133.00 described here-in-before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke (FRLS) cable for security light/ 3/6 pin 15 Amp socket outlet controlled by one, one way switch on independent board with and including 2.5 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.

S&F switch piano flush button type 5 Amp single pole one way ISI marked complete all as specified and directed.

S&F socket combination 3 pin 5 Amp AC 230 Volts piano flush type ISI marked complete all as specified and directed.

S&F Switch piano flush type single pole 15 Amp AC 230 Volts ISI marked complete all as specified and directed

S&F Switch and socket combination 6 pin 15 Amp AC 230 Volts piano flush button type (multipurpose) ISI marked complete all as specified and directed

S&F Fan stepped type electronic fan regulator rotary 0-4/5 steps step type, 240 Volt 50 Hz ISI marked complete all as specified and directed.

S&F Ceiling rose three terminals polycarbonate, isolated body complete all as specified and directed.

S&F LED light fitting 1x20 W, 230 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Lamp holder insulated body PVC/ polycarbonate with cord grip cap & back plate suitable for batten fitting ISI marked complete all as specified and directed

S&F Bell push, flush type, 5 Amp ISI marked complete all as specified and directed.

S&F Bell Buzzer, ding Dong Bell AC, 230 Volts single pole ISI marked complete all as specified and directed.

S&F LED light fitting 10 Watt 6000K LED Bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete with accessories complete all as specified and directed.

S&F LED 10 W (candle /ball type) with B-22 base, complete all as specified and directed. Make -Havells/Philips/Halonix

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F Sheet Metal enclosure double door SPN with 200 A rated bus bar 8 way AC 230 Volt complete all as specified and directed.

S&F isolator DP, 240 Volts 40 Amp 10 kA rupturing capacity 'C' series complete all as specified and directed

S&F 240 V, 10 kA 'B' curve MCB of single pole and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Taking down carefully existing exhaust fan/ceiling fan, ceiling cable end and refixing and connecting up including provision of cable from ceiling rose to fan complete all as specified and directed.

M&L for submain wiring of two single core 6 sqmm size stranded copper conductor PVC insulated unsheathed cable (FRLS) in and including PVC rigid non metallic conduit and one PVC cable 6 sqmm size solid copper conductor PVC insulated and unsheathed for continuous earth wire with junction boxes covered with laminated hylem sheet 3 mm thick and other accessories complete all as specified and directed

S&F in replacement distribution board iron clad, double door with IP-43 IK-9 protection suitable for MCCB as incomer 415 Volts, 3 phase, 50 C/s and MCB as outgoing, 4 way complete with appropriate size copper busbar and neutral link make of ABB/Havells/Indoasian complete with one MCCB 3 pole, 415 Volts, 100 Amp rating with rupturing capacity 16 kA and 12 Nos of MCB SP, 63 Amp of the same make as of distribution board and including cutting chases to wall for fixing DB and making good the disturbed surface to match with existing surface including taking down old unserviceable DB complete all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) and coping shall be in PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) 50 mm thick cover of RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia MS TMT bar @ 80 mm c/c both ways including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No 3 of SSR Pt 1 (2009) with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switched, DBs) complete all as specified and directed.

CLASSIC CONSTRUCTIONS

M/S NORTHERN ELECTRICAL WORKS

M/S Mohd Shafi Bhat

M/S SUHEEL CONSTRUCTIONS

ZAHOOR ENGINEERING WORKS

M/S TAJ DIN KHARI