Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Technical Qualified |
| 2 | Accepted-Technical | Accepted-Technical Technical Qualified |
Tender Value
₹9.9 L
EMD Value
₹23,305
Closing Date
19 Dec 2025, 5:00 pmClosed
Senior Manager (E) ED-III
A-1/4 Lakhanpur, Kanpur
Providing street light on 45 Mtr. Approach Road of I.A. Sanauli Kandhipur Distt. Barabanki.
2025_SIDC_1092972_1
ED_III_279_31072025
Open Tender
Electrical Works
Percentage
120 days
Sanauli Kandhaipur
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,475
UPSIDA
₹23,305
30 Jan 2026
22 Nov 2025
20 Dec 2025
22 Nov 2025
19 Dec 2025
22 Nov 2025
Supply and erection of steel tubular pole 410-SP-29, 9 m long ,129 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45 cm above the ground level.(SIDC Sch. Er 2(a)-II)
Supply and fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 120 watt confirming to IP 66 protection complete in all respects (With 5 Year Gaurantee. Catt. AA as per UPPWD Sch. No.1424 (Bajaj /Philips/Crompton/Wipro Make)
Supply & Fixing of 32 MM Dia 1.20 Mtr long G.I Pipe Bracket For Fixing of LED lights complete in all respects with clamp etc.
Supply & fixing of D clamp of size 50x6 mm flat iron on ST poles with nuts and washers etc. complete in all respect as per UPPWD Sch. No. 623
Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect rate.
S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(e-ii) (25 Amp. TPN)
Supply & laying 16 sq mm 2 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V grade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(c) & 507 (Polycab /KEI/ Havells/ Grandley/Gloster Make)
Supply & laying 25 sq mm 3.5 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(j) & 507 (Polycab /KEI/ Havells/ Grandle/Gloster Make)
S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer-incharge as per UPPWD sch. no. 503 (k) 25 sq. mm 3.5 core
Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint upto9 M. support above the ground level as per direction of Engineer in-charge of work/site including T&P , men & material required for proper completion of work.UPSIDC Sch. No.24.20.(A)
Supply&Fixxing of of UPSIDA LOGO Plate (Retro-reflective) on High Mast including cost of clamp nut & bolts all material men and T&P complete in all respect rates.
Tree Branches Triming for removing dark spots including cost of all material men and T&P complete in all respect rates.
Fabrication,Supply & Fixxing of work information board in M.S frame made by 50 mm dia sqaure pipe of stainless steel grade SS-304 &16 mm thick base plate with back supporting of bracing by MS flat of 25x6 mm and 2.85 Mtr. Long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green colour with white letters as required and shall be fixed at a height of 1.2 Mtr. from ground by providing 0.45x0.45x0.60 Mtr. cement concrete stone pad.
Supply & Fixing of 16 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 4 mm top dia minimum 150 mm bottom dia 500 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 8 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site reuimentt along with foundation bolts, nuts washers, anchor plates etc. complete in all respect as per UPPWD Sch. No. 652 (Bajaj, Philips, Crompton make)
Supply & fixing of factory wired integral LED flood light luminaries with die cast aluminium housing built with driver set suitable for 200 watt confirming to IP 66 protection complete in all respect as per UPPWD Sch. No. 1455 Cat.-AA (Philips, Crompton,Bajaj, Wipro make)
Supply laying and Fixing 50 dia Gi pipe trench less Through manual Boggi including trenching 90 C.M. dccp and refilling etc.Ann-2
Supply & fixing of LED Strip light with red, white and green (3 colour) in overall 18 Mtr. length (each colour 6 mtr.respectively) complete with LED strip driver (for each colour) etc.(complete with 01 year warranty for replacement from the date of work completion including tape and taping at entire tiranga strip (Philips,Crompton,Bajaj Make) complete in all respect.
Supply&errection of Stay set for ST pole with GI anchor plate(152x152x6mm) stay rod (16mm dia x 1.85 mtr.long) GI stay below (16 mm dia, thimble,double stay, tightener ,stay insulator ,clamps & stay wire (GS 7/13 .15 mm) including grouting in 1:4:8 ratio of cement concrete using course sand ,over brunt brick ballast. including all T&P, men & material for proper completion of work as per direction of Engineer in charge as per SIDC Sch. No. 06(a)
S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per UPPWD Sch. No.701
Supply & laying of following size 63 mm dia (OD 63 mm & ID 51mm niminal) DWC HDPE pipe ISI marked along with all accessories like socket band couplers etc. conferming to to IS 14930 Part-II complete with fitting & cutting joiting etc. direct & ground (75 cm below gaound level) including excavation & refilling the trench but excluding send cushioning and protactive covering etc. complete as required
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.09 MB
FEEFORMAT.xls
Tender Documents • 0.02 MB
etenderdocuments.pdf
Tender Documents • 0.44 MB
BOQ_2008306.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .