REPAIR/MAINT OF PATH, FLOORING, FENCING, PLASTERING AND OTHER MISC WORK IN MES INSTALLATION IN VARIOUS ZONE AT TALBEHAT MIL STN

Amount

Dismantling post or struts(wood, steel or RCC) any section including taking out embedded portion from natural ground and making good the disturbed ground complete all as specified and as directed by Engr-in-Charge.

Dismantling of Barbed wire fencing or any type and size

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in PCC band, PCC beam, benching of drain, coping, slightly rounded or chamfered angles and throating, and similar work as directed etc complete all as specified.

Formwork to edges of concrete flats, treads, breaks in floors, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, or beam horizontal or sloping and similar work exc 10cm but n exc 20cm wide.

S&F MS hand rails, half round or other stock section or core for wooden hand rail, straight portion drilled and countersunk for balusters, running bars, door frame, balusters, nosing to steps including embedding in concrete land screwing etc frame of wiremesh wind tiles for roof including securing bolts, posts, struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc, flat iron, fillets(for securing wire mesh etc including all necessary drilling bolting welding or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

S&F expanded metal welded steel wire fabric, made of GI hard drawn wire mesh of size 25mmX25mm, plain steel wire with hot Zinc coating ,wt. n.exc 4 kg/Sqm fixed to MS frame work complete all as specified and as directed.

Supply only chain link MS galvanised medium coated confirming to as per IS-2721-1979 fencing 75mm x 75mm mesh & 3.00 mm dia of wire complete all as specified and directed.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provn of binding wire complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in loose/soft soil complete all as specified and directed.

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete.

M&L for 5 to 10 mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers etc complete all as specified and directed.

S&F galvanised medium coated as per IS -4826, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel complete all as specified and directed.

Preparation of new steel surfaces of any description n. exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F precast cement concrete louvers and jallies 35 mm thick made in Mix 1:2:4 type B0 using 12.5mm graded stone aggregate set in cement mortar 1:4 etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement complete all as specified and directed.

M&L15mm thick plaster in CM 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for rendering in cement mortar (1:3) 10mm thick as in ceiling surfaces finished even and smooth complete all as specified and directed.

M & L preparation new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M&L for writing letters or figures Indian or Roman size of 100mm height using synthetic enamel paint complete all as specified and as directed.

M&L for dots, commas, shor line, dashed, hyphens, brackets, etc using synthetic enamel paint complete all as specified and as directed.

M&L for preparation concrete/plastered surface over 10 cm width or girth applying two coats of synthetic enamel paint any description complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Ditto above item except brick complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.

M&L for PCC inter locking tiles,coloured,reflective type/rubber moulded, conforming to IS-15658-2006 of 60mm thick,M-35 grade of approved quality, laid over and incl 50 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20 cm / 30cm x 30cm,25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm screed bed in CM mortar 1: 6 all as specified &directed.

Cutting holes into or through brick wall built in cement lime mortar and walls of cement concrete of superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required.

S&F rolled mild steel section work as in main and cross beam, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates confirming to Fe 410W(Gde E-250 quality A) complete all as specified

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed. Note:- opening of existing wind tie where required for taking down of AC sheet is deemed to be included in the rate quoted .

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick, Trapezoidal roofing profile with 190 mm Pitch & 29 mm depth of profile of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed. Make:- JSW

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.

S&F Framed/ Unframed work as in doors or gates of angle or other section with gusset plates,rails,braces,also small article for old gates etc complete, all small articles including drilled for fixing of steel sheeting or other covering etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.

S&F MS sheets1.25mm plain black sheet cut to size, holes punched including rounded headed screws, clout nails or rivets and fixed to steel framing with plain 40mm lap joints with riveted or welded seams including bending or as in covering to door shutters complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter all as specified and directed by Engineer-in-Charge.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished etc complete all as specified

M&L for form work fair finished to edges of concrete flats, treads floor and roofs n exc 20 cm wide and sides of RCC/PCC bends in walls (horizontal or slopping) and similar works exc 10 cm but n exc 20 cm wide complete all as specified and directed.

S&F TMT bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or screwing with clips all as specified and directed by Engineer-in-Charge.

Same as per above item but 6 mm to 8 mm dia complete all as specified and directed by Engineer-in-Charge.

Demolition (carefully w/o damaging the other part of building) of RCC concrete as in chajjas, fins, parapet etc including cutting of reinforcement to facilitate the provision of new with all necessary scaffolding at any height complete all as specified and directed .

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate Foundations, beams, plinth beams, base of column, lintel band, roof beam etc complete all as specified and directed by Engineer-in-Charge.

M&L for RCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in chajjas all as specified and directed by Engineer-in-Charge.

M&L for RCC type B-0 1:2:4 (12.5mm graded aggregate) nominal mix using 20mm graded crushed stone aggregate as in roof slabs supported on walls etc complete all as specified and directed.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

HARNAM SINGH ANIL SINGH

M/S A.R BUILDERS