Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹12.7 L
EMD Value
₹25,400
Closing Date
12 Oct 2026, 6:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
E.E. PWD City Dn.-I, Jaipur
E.E. PWD City Dn.-I, Jaipur
Supply of Furniture in Library at HCM RIPA ,(Raj.)
2026_CEPWD_603443_6
ST NIT No. 36 of 2026-27 City Dn-I, Jaipur
Open Tender
Miscellaneous Works
Percentage
90 days
Under Jurisdiction of PWD City Dn.-I
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Through E-Grass Challan City Dn-I, Office ID-13644
₹25,400
Yes
8 Oct 2026
8 Oct 2026
13 Oct 2026
8 Oct 2026
12 Oct 2026
8 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of uPVC Sliding windows: Frame Made from the Extruded uPVC Window Profile Section of size as mentioned below having outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2 mm thick GI section. Frame shall have three track configuration, two for sliding of window shutter and one for mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side.
Shutter : The shutter of sliding window shall be made of size as mentioned below Extruded 3 box multi- chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets alongwith 6mm thick ISI make plain float glass. Mesh shutter shall be made of 39w x 69h mm Extruded 3 box multi-chamber UPVC Window profile section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5 mm thick GI section duly mitered cut & thermal welded at all corners and fitted with nylon/polymer mesh and rollers/pully. Window profile section of size 106 w x 50 h & shutter of sliding window shall be made of 39 w x 69 h | 5.95 | Sqm | 8,443 | ₹50,235.85 |
| 2 | 5 mm float glass | 30 | Sqm | 1,122 | ₹33,660 |
| 3 | Providing & Fixing of ward robe shutters made out of 19mm thick BWP block board ISI of superior quality make with following details :- Front side finishing with 1mm thick superior quality mica approved make and 0.8mm thick approved shade mica in the inner side. Covering with teak wood beading 25x12mm all the sides of shutter & 35x12mm on outer frame for making good the wall joint including heavy brass S.S. fittings (Handle 200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos., SS Hanger Rod 20mm dia) complete as per drawing and design approved by Engineer in Charge. | 13 | Sqm | 6,128 | ₹79,664 |
| 4 | Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 0.8mm thick mica | 200 | Sqm | 838 | ₹1,67,600 |
| 5 | Providing & Fixing decorative veneer of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 4.0mm thick veneer | 117 | Sqm | 1,577 | ₹1,84,509 |
| 6 | Providing & Fixing BWR ISI marked 19 mm board of approved make for making wardrobe/shelves and other furniture with fevicol & nails complete as per approved by engineer in charge. | 170 | Sqm | 1,485 | ₹2,52,450 |
| 7 | IS 710- 1976 marked 12 mm thick Teak ply BWR one side | 130 | Sqm | 2,003 | ₹2,60,390 |
| 8 | Providing & Fixing Commercial Ply as per IS 710 : 1976 BWR of approved make for making wardrobe/shelves and other furniture with fevicol & nails complete as per approved by engineer in charge. 12 mm thick | 10 | Sqm | 1,134 | ₹11,340 |
| 9 | Providing & Fixing telescopic channel of approved make for drawers with screws complete as per approved by engineer in charge. 450mm long. | 18 | Nos | 619 | ₹11,142 |
| 10 | Providing & Fixing drawer handle of approved make for drawers with screws complete as per approved by engineer in charge. 150mm long | 20 | Nos | 215 | ₹4,300 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.69 MB
Tendernotice_2.pdf
PDF • 3.22 MB
Tender_Document_36_06.pdf
Tender Documents • 2.35 MB
BOQ_1070014.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .