Providing, fixing, and changing of previously installed phase separators of 125 number span to prevent unwanted short circuit causes due to clapping of conductors on high wind during the rainy season, with changing of damaged insulators, cradleguard

Amount

Supply and fixing of LT PVC SPACER for Four wire System

Erection of G.I wire no-6/8 SWG including binding etc.as required for cage cradle and crosslacing.

Supply and fixing of Air Break Switch

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

40 mm dia. G.I. pipe (medium class)

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required as required for Conductor Tensioning as where required due to sag of conductor (10 span X 50 length X 4 wire X 0.148 kg/Metre)=296 kg

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.

Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 4 wire system.

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc, as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc, as required

Total impact of GST for the purpose of CTC