GE863/EWS-T-12 OF 2022-23

Amount

Dismantling of Plain or corrugated steel sheeting, Pre painted galvalume aluminium Zinc Coating any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

Dismantling of timber scantlings under 40 sq cm in section in any position complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness, laid bedded and pointed in any type of cement mortar in floors, aprons etc., removing the rubbish out side of defence land complete all as specified and directed.

Dismantling of floor,hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling water tanks of capacity exc 250 & n exc 500 litres complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n exc 1000 litres complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in any type of cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thick complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) and removing complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm but not exceeding 4 sqm each with shutter (without taking off shutter from the frame) and removing complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and directed.

Taking down Shutters of any description exc 2 sq. m each complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal complete all as specified and directed.

Hacking out old glass (any thickness,size,quality or description) from wooden frames or stone,concrete or brick surrounds ,glazed with putty or fixed with beads complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins.

S & F for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. complete all as specified and directed.

S & F Plain Galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed.

S & F for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) over red oxide primer complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint with alkali resistant priming paint complete all as specified and directed.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M & L for preparation of old plastered surface of wall including complete removal of existing treatment and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.

M & L for preparation of old or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (first quality) complete all as specified and directed.

M & L for preparation of new plaster surface of wall and applying two coats of oil emulsion distemper over a coat of chalk whitning primer, complete all as specified and directed.

M&L for preparation of old treated wooden surfaces of any description exceeding 10 cms width or girth and applying one coat of varnishing over wood filler coat of thin varnish complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for Precast cement concrete block masonry 1:3:6 type C1 with solid block exc 10cm in width and setting in cement morter 1:6 complete all as specified and directed.

S&F rolled mild steel as in Roof trusses (Framed),trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing (Beam,tee,angle,channel or flat sections) including distance pieces,cleats etc complete all as specified and as directed.

M & L for rendering 15mm thick on brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10mm thick on brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, finished even and smooth with out using extra cement complete all as specified and directed .

Material and labour for 75mm thick, PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/PCC path, and paving, finished the surface even and smooth without using extra cement, joint filled with bitumen and sand mixture applied hot (area not exceeding 1.20 sqm ) , complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floor, including rough finished with out using extra cement complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 350x250x7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cm 1:4 complete all as specified and directed.

M & L 12 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, ceiling etc complete all as specified and directed.

S&F in repairs ply wood grade BWR type BB, 12 mm thick fixed to timber frame work with nails etc complete all as specified and directed.

M&L for 2nd class hard wood plain fillets,square,rectangular,or triangular in section clean sawn, area exc 13 sqcm and n exc 25 sqcm, secured with nails or brads complete all as specified and as directed.

M&L for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work complete all as specified and as directed.

S & F Second class hard wood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 35mm thick Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to Chowkat complete all as specified and directed.

Taking down shutter n. exc 1.0 sqm each complete all as specified and directed

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55Kg/m including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc complete all as specified and directed. NOTE: Thickness of powder coating shall not be less than 50 microne.

S&F powder coated aluminium door shutters aluminium section weighing 0.55Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nose in each door, hinges, powder coated aluminium snap beading, screws etc complete all as specified and directed. NOTE: Thickness of powder coating shall not be less than 50 microne.

Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, etc to make door or window fully functional complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with Stainless steel wire staples complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple,wooden beads or galvanised steel small nut and bolts etc. complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply and Fixing plain sheet glass/pin headded glass of 5.5 mm thick in Squares, area exceeding 0.50 Sqm in each pane with oil putty and clips complete all as specified and directed.

S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares, area not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares, area exc 0.5 sq.m in each pane complete all as specified and directed.

cutting holes in stone walls built in cement mortar for inserting hold fasts and making good the dismantled portion in cement mortar 1:3, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exceeding Half brick wall and not exceeding one brick wall complete all as specified and directed.

M & L for Preparation of surfaces of wood and wood based material, treating ends of posts, backs of chowkhats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and directed.

M & L for , treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, complete all as specified and directed.

S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed .

S&F in repairs aluminium alloy sliding door bolt 300 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs mild steel sliding door bolt plate type 300 mm long stove enameled, black with bright bolt, not less 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 100mm long extruded aluminium alloy with galvanised mild steel Butt hinges, pin anodise and fixed, type B-21 complete all as specified and directed.

S&F in repairs 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F in repairs 125 mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed.

S&F 100 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed.

Supply & fixing extruded aluminium alloy handles, fabricated type, of 125 mm long fixed with screw to shutter complete all as specified and directed.

Supply & fixing extruded aluminium alloy handles, fabricated type, of 75 mm long fixed with screw to shutter complete all as specified and directed.

S&F in repairs 125 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor All as specified.

S&F in repairs 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S & F in repairs 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and Fixing plain sheet glass/pin headded glass of 4 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as specified and directed.

Material and labour for machine cut kota stone slab 20-25 mm thick (of size not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:6) base including rubbing and mirror polishing, complete all as specified and directed.

Material and labour for machine cut kota stone slab 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as in skirting over and including 10mm thick cement plaster in cement mortar (1:4) on wall surfaces, complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 for water tank staging complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 but EXCEPT STONE for water tank staging complete all as specified and directed.

M & L for providing precast cement concrete Type C1 1:3:6 using 20mm graded stone aggregate and set in cement mortar 1:6 as bond stone complete all as specified and directed.

M & L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate as in coping complete all as specified and directed.

M & L for rendering 15mm thick on stone walling in CM 1:4 using WPC @3% by weight of cement finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately as 'supply Only''

Supply only Integral water proofing compound (WPC) complete all as specified and directed.

S & F in repairs 16mm bore of pipes in 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete with insulation to walls, ceilings or in floors etc. complete all as specified and directed.

S & F in repairs 20mm bore of pipes in 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete with insulation all as specified and directed.

S&F 500 Litres capacity Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top), double layer hoisted and fixed in position including screwable lid complete with insulation all as specified and directed.

S&F 1000 Litres capacity Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top), double layer hoisted and fixed in position including screwable lid complete with insulation all as specified and directed.

S & F PUF insulated cylindrical tank of capacity 500 litres vertical type, double layer, duly filled with PUF insulation superior quality to resist in temperature - 30 to + 35 degree cenfigrade and hoisted on platform complete with making, pipe line connection including screwable lid complete all as as specified and directed.

S & F PUF insulated cylindrical tank of capacity 1000 litres vertical type double layer duly filled with PUF insulation superior quality to resist in temperature - 30 to + 35 degree cenfigrade and hoisted on platform complete with making, pipe line connection including screwable lid complete all as as specified and directed.

S & F 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site complete all as as specified and directed.

S & F 25mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site complete all as as specified and directed.

S & F 20mm bore of pipe PP-R Ball valves (brass insert) as per requirement of the site complete all as as specified and directed.

S & F in repairs bib taps 15mm bore dia fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule screwed down, complete all as specified and directed.

S & F in repairs 15mm bore dia stop valves fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15mm dia Pillar taps, fancy type, chromium plated, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15mm bore dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs PVC connections 45 centimetre long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, complete all as specified and directed.

S & F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, waste pipe etc complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed.

S & F in repairs vitreous China Water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed.

S&F in repairs stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed.

S & F in repairs 20 mm dia brass chromium plated tubular towel rail, D type, 60cm long between flanges complete all as specified and directed.

S & F in repairs cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified and directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repairs stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union, overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Checking of joinery (wooden/steel), iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed. Note : If any items required to be replaced, the same shall be measured and paid under respective items as 'S&F in repairs' and in that case this item will not be measured and paid.

S&F in repairs mild steel, chromium plated curtain rod 20mm dia with holder/bracket, stops, rollers etc. complete all as specified and directed.

S&F in repairs 2nd class soft wood beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc. complete all as specified and directed.

S&F in repairs 100 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 125 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 150 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs mild steel cold rolled butt hinges medium weight 100 mm long fixed to pressed steel/angle iron frames by welding complete all as specified and directed.

S&F 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F in repairs 18/19 mm thick block boards, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board etc. complete all as specified and directed.

S&F in repair 18/19 mm thick prelaminated particle boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

S&F MS flat iron as in hold fast , wall ties, hooks for hanging fans and similar small articles conforming to Fe-290-0 Gde-E-165 complete all as specified and directed.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumbing work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof. Note : If any items required to be replaced, the same shall be measured and paid under respective items as 'S&F in repairs' and in that case this item will not be measured and paid.

M&L 15 mm bore steel water tubing, medium grade, galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings ( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed.

S&F in repair C.P. grating 100mm square/round with or without hole complete all as specified and directed.

S&F in repairs 32 mm dia PVC waste pipe for WHB complete all as specified and directed.

S&F in repairs 40 mm dia PVC waste pipe for sink, complete all as specified and directed.

S&F in repairs stainless steel toilet paper holder fixed with wooden gutties and screws to wall surfaces complete all as specified and directed.

M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps, jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Supply and fixing in replacment of switch piano type 5 Amp, 230 Volt, flush button, single pole one way complete all as specified and directed.

Supply and fixing in replacement of socket outlet 3 pin, 5 Amp, 2-in-one, 230 Volt, flush type complete all as specified and directed .

Supply and fixing in replacement of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

Supply and fixing in replacement of socket outlet 3 pin, 15 Amp, 2-in-one, 230 Volt, flush type, including 2 way PVC gang box to accommodate 15 amp switch and socket complete all as specified and directed.

S&F in replacement Bell push flush type 5/6 Amps complete all as specified and directed.

S&F in replacement Bell AC 230 volt, single pole, complete all as specified and directed.

S&F in replacement ceiling rose, 3 terminal complete all as specified and directed.

Supply and fixing in replacment of Switch socket combination 2 in 1, 5 Amp, 230 Volt, flush type with PVC gang box complete all as specified and directed.

Supply and fixing in replacment of Switch socket combination 2 in 1, 5/ 16 Amp, 230 Volt flush type with PVC gang box complete all as specified and directed.

Supply and fixing in replacment Modular switch 1 way, 6 Amp, 1 module, multipurpose, flush type, complete all as specified and directed.

Supply and fixing in replacment Modular switch 1 way 16Amp, 1 module, multipurpose, flush type, complete all as specified and directed.

Supply and fixing in replacment Socket, 6Amp - 2/3 pin, combined, 2 module, multipurpose, flush type, complete all as specified and directed.

Supply and fixing in relacment Socket, 16Amp - 2/3 pin, combined, 2 module, multipurpose, flush type, complete all as specified and as directed.

Supply and fixing in replacment of modular white cover plate with frame, 3 module complete all as specified and directed.

M&L in replacement lamp holder, PVC/ Polycarbonate type with back plate suitable of batten fittings complete all as specified and directed.

Supply and fixing in replacment surface & wall mounted LED 20W tube light fitting batten 4 feet, mirrorlite slim type with extruded aluminium housing alongwith 20W LED lamp PC body with all accessories complete all as specified and directed. Make: Crompton Cat No. LDLSR20-CDL or equivelent of Havells/Wipro/Philips/Bajaj.

Supply and fixing in replacement of LED 10 W Bulk head luminaire, compact modern design utility with high energy savings as specified and directed. Make: Crompton Cat No. LBHP-10-CDL or equivelent of Havells/Wipro/Philips/Bajaj.

Supply and fixing in replacement 9 watts LED lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode complete all as specified and directed. Make: Crompton Cat No. LED9WDFINV4CDL or equivelent of Havells/Wipro/Philips/Bajaj.

Supply and fixing in replacement LED Lamp 9 Watt in lamp (Bulb) complete all as specified (Make-Crompton Cat No. B22/E27-CDL or equivalent in wipro/Havells/Philips

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 4 way 240 volt complete all as specified and directed.

Supply and fixing in replacement MCB SPN, 40 Amps, 230V complete all as specified and directed.

Supply and fixing in replacement MCB SP, 6-20 Amps, 230V complete all as specified and directed.

M&L in replacement Sheet metal enclosure with two pin and earth plug and socket complete with one single pole and neutral MCB 20 Amp , 10 KA complete all as specified and directed.

S&F in replacement of thermostat suitable for 25/50 litres capacity Geyser complete all as specified and directed.

S&F in replacment of multifunction safety device (pressure release valve) suitable for 25/50 ltrs cap geyser complete all as specified and directed.

S&F in replacement of heating element triangular type1500 Watt suitable for 25/50 litres capacity Geyser complete all as specified and directed.

S&F in replacement of heating element triangle type 2000 Watt suitable for 25/50 litres capacity Geyser complete all as specified and directed.

S&F in replacment of indicating lamp set red/ green colour complete all as specified and directed.

S&F in replacement of PVC flexible connection pipe, size 2 feet's ,suitable for Geyser hot water including washer complete all as specified and directed.

Supply and fixing in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm dia suspension wire, one twin core cable flat or circular of size 16 Sqmm complete all as specified and directed.

Supply and fixing in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm dia suspension wire, one twin core cable flat or circular of size 10 Sqmm 2 Core complete all as specified and directed.

Supply and fixing in replacment of LED driver 36-40 watts suitable for internal electric LED fittings including testing on completion size complete all as specified and directed.

Supply and fixing in replacement PVC Casing Caping 1/2" (12/20mm) complete all as specified and directed.

Supply and fixing in replacement PVC Casing Caping 3/4" (20/25mm) complete all as specified and directed.

Supply and fixing in replacement PVC Casing Caping 1" (25/32mm) complete all as specified and directed.

Supply and fixing in replacement Thimble 10 Sqmm complete all as specified and directed.

Supply and fixing in replacement Thimble 16 Sqmm complete all as specified and directed.

Supply and fixing in replacement Thimble 25 Sqmm complete all as specified and directed.

Supply and fixing in replacement Thimble 35 Sqmm complete all as specified and directed.

Supply and fixing in replacement Thimble 50 Sqmm complete all as specified and directed.

Supply and fixing in replacement Thimble 70 Sqmm complete all as specified and directed.

Supply and fixing in replacement Thimble 95 Sqmm complete all as specified and directed.

Supply and fixing in replacement Thimble 120 Sqmm complete all as specified and directed.

Supply and fixing in replacement Thimble 150 Sqmm complete all as specified and directed.

Supply and fixing in replacement of stainess steel fastner suitable for fixing geyser 25/50 ltrs complete all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 70,698.25 for old Materials as per Schedule of Credit.

M/S SHIV NATH ENTERPRISES

M/S Shamsher Negi Dewa