Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
30 Nov 2026, 11:00 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
120 days
Expenditure
General
70
3 conditions
1. Successfully designed, supplied and commissioned Onboard Remote Monitoring System as per specification no. CLW/C-D&D/ES/3/0554, Part 0 and Part 1 for three phase electric locomotives over Indian Railways OR 2. Designed, developed, supplied and commissioned minimum 01 (one) no. IGBT based traction equipment and/or Vehicle Control Unit on electric/diesel locomotive/EMU/METROs over Indian Railway OR 3. RDSO approved vendors for 3-phase locomotive traction motor bearing for TM type 6FRA6068 as per RDSO U-VAM item ID 3100122. OR 4. Those firm/ consortium / JV who are manufacturer of Vibration, temperature and level sensor for rolling stock application and has proven past performance f or supply and commissioning
In case, the bidder is a consortium of firms, relevant documents clearly defining the responsibility and role of each of the consortium members in the execution of the work should be submitted along with the offer against this tender.
Bidders must fulfill the "conditions for responsiveness of offer" mentioned in the tender documents, failing which, their offer will be summarily rejected.
67 conditions · 1 needing a document upload
Have you gone through the terms and conditions mentioned in the Tender Schedule, Special Conditions of the tender if any and the CLW BID DOCUMENT- (Rev.V) Jan. 2026 (Copy enclosed)? Having participated in the tender, it will be considered that you have gone through all the conditions mentioned in these documents and the same are accepted by you.
Have you agreed to supply the tendered stores at the rates quoted by you in accordance with the IRS conditions of contract and in accordance with special and other conditions specified / attached with the tender?
Have you ensured that you have not quoted/ uploaded any commercial/technical deviations/ financial term in place other than specified in the tender enquiry or otherwise the same will not be considered and will be ignored? Any contract placed after ignoring such financial/ commercial terms at the place other than the specified in tender enquiry will be binding on you.
Have you ensured that you are GST compliant and you have quoted Tax structure/ rates as per GST law?
Have you attached the self declaration certificate for percentage of local content and details of location where local value addition is made?
Have you mentioned the percentage of local content in the relevant para of techno commercial offer form.
Have you read the Public procurement policy: Make In India guidelines attached to the tender and offered bid after complying the conditions mentioned therein?
Have you agreed for submission of SD if you are not exempted from the same as per the tender condition mentioned in CLW BID DOCUMENT- (Rev.V) Jan. 2026 (Copy enclosed)?
Have you attached relevant document for MSE if you claimed purchase preference as MSE firm.
Have you attached along with the offer a certificate for compliance of OM of MoF dated 23.07.2020 ?
Have you enclosed signed copy of Bid securing declaration i.e. Annexure-A in case you have claimed exemption from EMD/SD.
Have your noted pre-decided rate of AMC during quoting of offer?
(a) All the bidders/Tenderers while quoting the rates should clearly indicate HSN Code, the rate of applicable duties and taxes included in the prices quoted by them. Any variation in tax structure/rate shall be dealt with under Statutory Variation Clause (b) All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law. (c) All vendors should have GST Registration Number. (d) GST Act and Rules as applicable from time to time is applicable (e) No bills for payment will be accepted without GST registration. (f) In case the successful tenderer is not liable to be registered under CGST/GST/UTGST/SGST ACT, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism [RCM] and deposit the same to the concerned tax authority.
The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS Conditions of Contract and [or] special Conditions and [or] other Conditions specified/attached with the tender.
The Firm shall pass on (as per section 17 (1) of CGST/SGST Act) any reduction in tax rate on supply of goods or any benefit of input tax credit to the Railway through a commensurate reduction in price without any undue delay. To the above effect the firm should give declaration that all the benefits accruing on account of change in tax rate and any additional input tax credit (ITC benefit) shall be passed on the Railways.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items,and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender condition.
EMD: - All bidders except those are exempted from submitting EMD as per relevant para of CLW BID DOCUMENT- (Rev.V) Jan. 2026 (Copy enclosed), shall be required to submit EMD as per the amount mentioned in the tender schedule. Offer submitted by bidders without EMD who are not eligible for exemption shall be summarily rejected.
Vendors who claim for exemption from payment of Earnest Money (EMD) as per the relevant para of CLW BID DOCUMENT- (Rev.V) Jan. 2026 (Copy enclosed) shall have to attach scanned copy of requisite documentary evidence in support of their claim along with offer, failing which the offer will be considered invalid, without Earnest Money and will be summarily rejected .
Security Deposit [S.D.] : Bidders must agree to furnish Security Deposit [S.D.] as applicable @ 5% of contract value subject to maximum ceiling limit as mentioned in CLW BID DOCUMENT- (Rev.V) Jan. 2026 failing which their offers will be summarily rejected. Bidders claiming exemption from paying Security Deposit [S.D.] must upload requisite document towards such claim, along with the offer as per relevant para of CLW BID DOCUMENT- (Rev.V) Jan. 2026 (Copy enclosed).
SFMS-based Bank Guarantee: As per Rly Bds Letter No. 2020/ACII/9/6/e Dt. 07.04.2022 & no. 2025/F(x)-II/10/14 dtd. 17.10.2025, it has been communicated that the online verification of Bank Guarantee submitted by Vendors / Contractors through the SFMS (Structured Financial Messaging System) platform is now enabled in IPAS, (ref. Section-II, Clause 13.4.1 of CLW BID DOCUMENT- (Rev.V) Jan. 2026 (Copy enclosed). Bank Guarantees not issued through SFMS or not verifiable in IPAS shall not be accepted.
All Tenderers claiming exemption from submitting EMD/SD, shall be required to sign a bid securing declaration as per Annexure-A (copy enclosed). By seeking exemption of EMD/SD by the tenderer, it will be considered that the contents of Annexure A have been read and unconditionally agreed to and accepted by the tenderers.
In compliance to Public Procurement (Preference to Make in India), Order2017 - Rev circulated vide Railway Board letter no. 2020/RS(G)/779/2/Pt.1(E-3322671) dated 20.08.24 (Copy enclosed), the Class-I local supplier/Class-II local supplier at the time of tender, bidding or solicitation shall be required to indicate percentage of local content and provide self-certification that the item offered meets the local content requirement for Class-I local supplier/Class-II local supplier. They shall also give details of the location(s) at which the local value addition is made.
Warranty Period: 72 Months after the date of delivery or 60 months from the date of commissioning. AMC : AMC be as per spec no. CLW/AMC/C-D&D/06 issued in April 2024 for 05 years. [ Warranty Period: 6 years, AMC Period: 5 years].
Bidders claiming to avail benefits and preferential treatment extended to Micro and Small Enterprises [MSEs] should necessarily enclose relevant documents. Bidders may please refer to the CLW BID DOCUMENT- (Rev.V) Jan. 2026 (Copy enclosed) in this regard.
The authorized dealer has to upload the tender specific authorization letter from the manufacturer authorizing him to submit offer against this tender. The tender specific authorization to the tender should be directly from the manufacturer without which, the offer will be summarily rejected.
Bidder to submit a certificate, as mentioned hereunder, along with a bid for compliance of OM of MoF dated 23.07.2020. Model Certificate: "I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India: I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.)". Even if the bidder does not give such declaration along with the offer and submits the offer then it will be considered that the contents of above declaration have been read and unconditionally agreed and accepted by the tenderer. If the bidders are not agreeable to this declaration they have to categorically mention about the disagreement in Techno Commercial Deviation. If such certificate given by a bidder whose bid is accepted is found to be false, this would be a ground for immediate termination and further legal action in accordance with law.
All bidders shall confirm declaration as below in compliance of restrictions under Rule 144 (ix) of GFR-2017 and as per Clause 30 of Section II of "CLW BID DOCUMENT- (Rev.V) Jan. 2026" :- (A) l have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. Where applicable, evidence of valid registration by the Competent Authority shall be attached. (B) (i) "l have read the clause regarding restrictions on procurement from a bidder having Transfer of Technology (TOT) arrangement. I certify that this bidder does not have any TOT arrangement requiring registration with the competent authority " OR (ii) "I have read the clause regarding restrictions on procurement from a bidder having Transfer of Technology (TOT) arrangement I certify that this bidder has valid registration to participate in this procurement." (Strikeout any one of two i.e. (i) or (ii) whichever is not applicable). If the bidder fails to give such declaration, as above, then it will be presumed that the contents of above declaration have been read and unconditionally agreed and accepted by the tenderer. If any tenderer is not agreeable to this declaration they have to categorically mention about the disagreement in Techno Commercial Deviation.
Conditions for Annual Maintenance- After expiry of Warranty Period of the equipment, a contract will be concluded by Zonal Railway where the locomotives installed with this golden loco will be homed. Execution of contract for maintenance of the equipment will be monitored by concerned Zonal Railway Authority. Rate of maintenance of equipment is already mentioned in this tender.
CONTRACT PERFORMANCE GUARANTEE FOR AMC:- The contactor shall submit to concerned zonal consignee performance Guarantee for amount equivalent to 5 % of contract agreement for (MX12 + 2) months where M is the no. of years for which contract agreement is to be signed. This Performance Guarantee shall be in the form of Bank Guarantee. The user Railway may forfeit the BG in case of the failure of the firm in execution of the contract or in the event of breach of any terms and conditions of contract by the contractor. Reference as per AMC para 15.0
The bidders/ tenderers have to quote the rates for Capital cost of this Golden loco. During the maintenance period after completion of warranty period, the Contractor shall be paid for its Maintenance obligations @ 2.5% (Two point five percent) of the total Capital cost of this Golden loco predefined cost of AMC equipment pertaining to the fleet in holding with Authority per annum, from the date of completion of Warranty Period till completion of Maintenance (i.e. 05 years after expiry of normal warranty period). The condition of AMC will remain be governed by Comprehensive Annual Maintenance CLW Spec no. CLW/AMC/C- D&D/06 issued on April 2024 (copy attached)
Formula for Price adjustment for Maintenance Price (WPI):- Lump sum payment for Maintenance shall be adjusted every quarter for changes in rates and prices of various inputs in accordance with the formula given below: V=P x (Wi -W0)/W0 Where V = Increase or decrease in the quarterly lump sum payment p = quarterly lump sum payment due to the Contractor after adjusting any reduction in payment for non-compliance of the Maintenance Requirements W0 = The wholesale price index (all commodities) for the month of the tender opening date as Base date' Wi = The wholesale price index (all commodities) for the first day of the quarter under consideration determining the price adjustment."
For AMC Contract:- Base date of WPI for price adjustment, shall be the tender opening date ( or month) which will be available.
Force Majeure Clause: As per IRS conditions of contract.
This tender is through single bid system (without e-Reverse Auction).
The bidder shall give self certification for local content in the quoted item (goods/works/services) at the time of tendering. However, at the time of execution of the project, for all contracts above INR 10 crores, the contractor/supplier shall be required to give local content certification duly certified by cost/ chartered accountant in practice. For cases where it is not possible to provide certification by cost /chartered accountant at the time of execution of project, the supplier shall be permitted to provide the certificate for local content from cost/chartered accountant after completion of contract, within time limit as mentioned in the contract. In case the contractor/ supplier does not meet the stipulated local content requirement and the category of the supplier changes from class-I to Class-II/ Non-local or from Class- II to Non-local, a penalty up to 10% of the contract value may be imposed. However, contract once awarded shall not be terminated on this account.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 condition
Validity of offers: Offers should be valid for 120 days after closing date of tender. Any offer having lesser validity shall be deemed as commercially unresponsive and will be summarily rejected.
1 location across West Bengal · 2 Set total
Golden Loco as per SOR no. C-D&D/T/24/Golden Loco
70265018~CLW
70265018
Open - Indigenous
Goods
West Bengal
₹0
₹2.2 L
6 Nov 2026
6 Nov 2026
1 item · 2 Set total
Golden Loco as per SOR no. C-D&D/T/24/Golden Loco dated 16.09.2026 comprising of One se t of System aggregator with MVB, CAN, Ethernet communication for integration of the same with propulsion systems if required and for integration of all the types sensors (current/.Pressure, vibration)for Golden Loco and capable of transmitting data from the onboard device (similar to specification no. CLW/C-D&D/ES/3/055 4, Part 0 and Part 1 and CLW/C-D&D/ES/3/0557, Alt 0) to CLW server for predictive analysis [ Warranty Per iod: 72 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SMM/RB/CLW/CRJ, CLW | West Bengal | 2.00 Set |
| Total | 2 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5959369.pdf
ATTACHMENT
5959371.pdf
ATTACHMENT
5959376.pdf
ATTACHMENT
5959377.pdf
ATTACHMENT
5959340.pdf
ATTACHMENT
5959201.pdf
ATTACHMENT
5959246.pdf
ATTACHMENT
5959258.pdf
ATTACHMENT
5959264.pdf
ATTACHMENT
5959196.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .