Construction of 12.5 MVA 66/11 kV T/F Plinth and allied civil works at 220 kV S/S Mahilpur

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation

Scraping of bricks

Dismantaling of brickwork

Dismantaling of Concrete 1:2:4

Dismantlement of RCC

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centring and shuttering for columns (Square or rectangular or poly gonal in plain)

Cement Concrete 1:6:12 with stone ballast 40mm gauge stone aggregates using concrete mixer volumetric type

Cement Concrete 1:5:10 with stone ballast 40mm gauge stone aggregates using concrete mixer volumetric type

Cement Concrete 1:2:4 with stone ballast or shingle using concrete mixer volumetric type

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure

Extra for vibrator used by the contractor at his own cost.

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.

115 mm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth.

Conglomerate floor 25mm thick cement concrete topping 1:2:4.(Using mechanical mixer for mixing of material)

Conglomerate floor 50mm thick cement concrete topping 1:2:4.(Using mechanical mixer for mixing of material)

12.5 mm thick cement plaster 1:3

12.5 mm thick cement plaster 1:4

12.5 mm thick cement plaster 1:5

20mm thick cement plaster 1:4 in two coat work

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position R S Joists (Through rate)

Mild steel reinforcement for RCC work where not included in the complete rate of RCC including bending, binding and placing in position complete in all respects-Above 20mm dia bars

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete

Welding by gas or by electric plant, including carriage to and from workshop.

Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia above: From 0 to 15m

Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia above: Exceeding 15m but upto 30m

Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia above: Exceeding 30m

Fixing of templates along with bolts as per drawing

Supply, hoisting & placing of ferro cement trench covers, frames of size given below made of MS Flat 50x3 mm with 6 mm dia bars at 4.5" and 9" welded to flat with lifting hook as per Drg No. CW/DS2537 R5 AND cs/ds2420 R3 Complete of ferro cement trench covers of various sizes: T3- Type (2'-2"x 2'-2")

Supply, hoisting & placing of ferro cement trench covers, frames of size given below made of MS Flat 50x3 mm with 6 mm dia bars at 4.5" and 9" welded to flat with lifting hook as per Drg No. CW/DS2537 R5 AND cs/ds2420 R3 Complete of ferro cement trench covers of various sizes:T4 -Type (1'-9"x2'-6")

Supply, hoisting & placing of ferro cement trench covers, frames of size given below made of MS Flat 50x3 mm with 6 mm dia bars at 4.5" and 9" welded to flat with lifting hook as per Drg No. CW/DS2537 R5 AND cs/ds2420 R3 Complete of ferro cement trench covers of various sizes: P-Type(3'-4" x 1'-8")

Providing and Fixing various sizes M.S Cable Racks

Providing and fixing MS Angle iron nosing made out of 50x50x3 angle iron with hold fast complete in all respects

Providing and fixing MS Angle iron nosing made out of angle iron 50x50x6with hold fast complete in all respects

Supplying and spreading of crushed stone nominal size 20mm in 75 mm thick layer complete

Providing & Fixing base Plates Size 235x220x12mm for Transformer plinth

Supply & Fixing MS Cleats 65x65x6 mm

Disposal of Earth/Debris

Extra for Carriage beyond 5KM:- Coarse sand & crusher & Stone Ballast

Extra for Carriage beyond 5KM:- Fine sand

Extra for Carriage beyond 5KM:- Cement

Extra for Carriage beyond 5KM:- Steel

Difference of Rates of Material:- Crushed Bajri 13.2mm

Difference of Rates of Material:- Crushed Bajri 11.2mm

Difference of Rates of Material:- Coarse Sand

Difference of Rates of Material:- Stone ballast 40/20mm

Difference of Rates of Material:- Bricks (Distt. Jalandhar)

Recovery of dismantled material:- i) Bricks

Recovery of dismantled material:- i) Brick bats

PAUL AND COMPANY

SURJIT SINGH AND SONS

INDO ENGINEERING WORKS