BARRICADING WORK AND ALLIED MAINT WORKS FOR ANNUAL NCC PM RALLY UNDER GE (EAST) DELHI CANTT-110010

Amount

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

Transporting and fixing only of wooden post and placing in position and fixing of wooden post including treatment of wooden post below gound level with hot mixture of tar and creosote in proportion of 20kg of coal tar to 20kg of cresote and paintng one coat of synthetic enamel paint on posts on portion above ground level. (size of post is 10cmx10cmx1.65mtrs), complete all as specified and as directed. (Note : Excavation and earth work shall be measured measured separately in item No 1 here-in-before)

Transporting and taking out after use, wooden post of any description embeded in ground and making good embeded portion of disturbed ground and removing the wooden post to respective MES store yard and stacking properly, complete all as specified and as directed.Note : (Wooden posts shall be obtained from item No 2 here in before.)

Transporting and fixing only GI Tubing 40 mm dia, placing and fixing in position with mild steel clamps & bolts to wooden posts, complete all as specified and as directed. (Note : GI Pipes, clamps and bolts shall be issued as free for fixing and return to MES store after completion of work.)

Transporting and taking out/down after use, GI tubing 40 mm dia including mild steel clamps, bolts nuts etc., and removing from site and depositing to respective MES store yard and stacking properly, complete all as specified and as directed.

Transportation and fixing only welded mesh with MS angel iron frame 300cmx165cm height, placing and fixing in position including one coat of aluminium paint, complete all as specified and as directed. (Note : 1. Welded mesh with angle iron frame shall be issued as free free for fixing only.)

Transporting and taking out after use, welded mesh frame including embeded portion and making good disturbed ground and removing the same to MES store Yard and stacking properly, complete all as specified and as directed.

Transporting and fixing only of GI pipe frame of 40mm dia and placing in position and fixing complete including one coat of aluminium paint size of frame 2.95 to 3.05m long and 1.5m high, complete all as specified and as directed. (Note : 1. Welded mesh with angle iron frame shall be issued as free free for fixing only )

All as per description of Srl item No.- 08 here-in-before but size of frame 2.85 m long and 1.5m high, complete all as specified and as directed.

All as per description of Srl item No.- 08 here-in-before but size of frame 1.5 m long and 1.5m high, complete all as specified and as directed.

Taking out after use, embeded posts of GI tubing including making goood disturbed ground and removing the welded frame to MES store yard with transportation and stacking properly, complete all as specified and as directed. (Note :- Taking down from Srl item No 8 to 10 of BOQ)

Transportation and fixing only steel wire fabric frame of size (1.5m x0.9m), placing and fixing in position of steel wire fabric and frame with nuts and bolts to the MS pipe posts and paintig one coat of aluminium paint, complete all as specified and as directed. (Note : 1. Welded mesh with angle iron frame shall be issued as free free for fixing only .)

Dismantling after use and Transporting of steel wire fabric from MS pipe stand and removing to MES store Yard and stacking properly, complete all as specified and as directed.

Transportation and fixing only Welded mesh of mild steel in angle iron frame of size 3000mm length x 1650mm height after applying two coats of aluminium paint over a coat of red oxide, complete all as specified and as directed (Note : 1. Welded mesh with angle iron frame shall be issued as free free for fixing only .)

Dismantling after use and Transporting of welded mesh of angle iron frame and removing to MES store Yard and stacking properly, complete all as specified and as directed.

Transporting and fixing only Stainless Steel square poles of 150mm size width and 1.50mtr height, placing and fixing in position complete including buffing and polishing of SS poles all as specified and as directed. (Note : SS Poles shall be issued as free for fixing only ).

Dismantling after use and Transporting of stainless steel poles and depositing to MES store Yard and stacking properly, complete all as specified and as directed.

Transportation and fixing Welded mesh of stainless steel in angle SS frame of (Overall area of frame with mesh not exceeding 4.00 Sqm each) including placing and fixing in position after buffing and polishing of SS complete all as specified and as directed. (NOTE : Welded mesh of stainless steel with frame shall be issued as free for fixing only ).

Dismantling after use and Transporting of welded mesh of stainless steel in stainless steel frame and depositing to MES store Yard and stacking properly, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M & L for Mild Steel work as in Bands, straps, supports or stays for rainwater, base plate, staple plate, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed

M & L for Stainless Steel work of Grade-304 as in vertical post/pole of any type and size (upto a height of 10 Mtrs and 200mm dia) including special shaped washers, channels, plates horizontal/ vertical also ornamental works like designer railing chain, lattoo any type and size as approved by GE and as reqd at site made of hollow tubes or in any other shape as per requirement at site, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary nuts and bolts dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. (Note :- No extra payment shall be made to the contractor for ornamental works of this item).

Welding existing old GI/MS pipes /angle iron frame (length of weld joint exc 5mm but not exc 15 mm joint for barricadding including preparation of surface and finishing the same by painting two coats of synthetic enamel paint complete all as specified and as directed.

S & F in replacement for stainless steel 'Q' Master of 350mm dia base, 1.00 Mtr height 50mm dia stainless steel pole and 50mm width 2.5 Mtr long enclosure strip complete all as specified and as directed.

S & F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. (Make : Darkeye/3M/Alcolite).

S & F in repairs solar road stud aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. (Make : Darkeye/3M/Alcolite).

M & L for Epoxy Grouting of superior quality filling in joints to address seepage problem of any type of surfaces (Kota/Granite/floor & wall tiling etc) including scraping the existing treatment on joints of any type as per manufactures instructions complete all as specified and as directed. (Make : Aditya Birla/Asian Paints/Dr. Fixit) Note :- (i) Application shall be done through authorised applicator only. (ii) Purchase voucher of Epoxy Grout shall be produced for verification of Engr-in-Charge/GE before RAR.

Deep Cleaning of surfaces such as (Granite, Kota Stone, Any other type of floor/wall tiling surfaces) horizontal or vertical after complete filling of white cement and pigment on existing grooves including scraping/sweeping of the cement slurry, dust, mud, algae or any type of foreign materials or any type of debris and cleaning the splashes upto the complete satisfaction of Engr-in-Charge, complete all as specified and as directed. (Note :- 1. Deep cleaning shall be done through a light grinding cleaning machine having water tank mounted and water sprayer, operated by an experience operator and by using water and adequate floor cleaner and chemical. 2. Water through water bowser, grinding machine, operator and floor cleaning chemical shall be arranged from contractors side and no extra payment shall be made for the same 3. Splashes or debris coming out from cleaning shall be thrown, out side defence land and the rate shall be deemed to include in the quoted rate of item).

M & L for Machine cut kota stone slab flooring 20-25mm thick over & including15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing after dismantling of existing kota, stone slab of any description complete all as specified and as directed.

S & F for PVC hollow wall panelling 7 to 8 mm thick wood grain teak finished prelaminated inclusive of fixing to wall incl moulding end caps fixed with PVC sleeves and screws as required at site including taking down existing panelling of any type complete all as specified and as directed.

M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over & including 15 mm thick avg screed bed in CM 1:6 and after dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.

S & F designer board false ceiling of size 600x600x4mm thick E-Board white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.

M & L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required (Size and pattern as approved by GE) and including dismantling of old existing kerb stone of any type and size etc complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint, any tint on new brick, kerb stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of new surfaces and including 2-3mm wall care putty over a coat of primer complete all as specified and as directed.

M & L for preparation of Old concrete surfaces and applying two coats of synthetic enamel paint including 2-3mm wall care putty over a coat of primer complete all as specified and as directed.

M & L for preparation of pathway/flooring duly brooming/scraping the existing surfaces and also removing the vegetable/glass over it (over Interlocking/Chequired tile/concrete surfaces) or any type of other surfaces old/new or in any position and applying two coats of indigo floor paint of superior quality complete all as specified and as directed. (Make : Asian Paints/Berger/Indigo).

M & L for preparation of black top surfaces of road by cleaning with air blower and applying 1.5mm thick road marking strips, dahses, arrows letters etc 10cm wide or more (retro-reflective) of white or golden yellow shade/colour using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and driven by experienced operator on road surface including cleaning all loose dirt, seals, oil greases and foreign materials etc complete all as directed. (Make : Asian Paints/APCO or equivalent).

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade laid dry in floor/path over and including 50 mm thick sand bedding layer including dismantling of old interlocking tiles /path etc and remove from the MoD land complete all as specified and as directed. complete all as specified and as directed.

M & L for Coloured Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over & including15mm thick screed bed in CM 1:6 etc after dismantling of existing chequired tiles of any type complete all as specified and as directed.

M & L 20-22 mm thick granite (Type, Size and colour as approved by GE and as per site requirement) of any type work table rubbed and polished as in floors, steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching, moulding and polishing after dismantling of old granite of any type including cement mortar bedding (but not backing), complete all as specified and as directed .

S & F in repairs UPVC casement door handles made of zinc alloyed (white powder coated) with one side knob and one side key system complete all as specified and as directed.

S & F in repairs UPVC casement door locks Corner striker Secondary Strikers, Cylinder, Door transmission gear made of mild sleel with multi point locking system with strikes complete all as specified and as directed.

M & L for Vitrified coloured tiles dark shade 8-10mm thick (square/rectangular) polished, area of each tile exc 0.42 sqm but n exc 1.00 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size 300mmx300mm or 400mmx400mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15mm thick screed bed in CM 1:6, after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of chalk whitening putty complete all as specified and directed.

S & F in repairs for blinds fixing to window or doors of roller or any other pattern and colour as per requirement including necessary fixing material such as screw, guity etc complete all as specified and as directed.

Taking down cement or cement lime plaster , any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair incl scafolding etc, complete all as specified and as directed.

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

M & L for preparation of new plastered external wall and ceiling surfaces of and applying Two or more coats of 100% water proof exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Oil bound distemper complete all as specified and directed.

M & L for preparation of plastered, unplastered or pointing surfaces old decorated/un-decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of water proof exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achive desired finish at any height complete all as directed.

M & L for preparation of plastered, unplastered, pointing and other (fancy/ornamental/fort) old decorated surfaces of walls completely scraping down the existing finsih and applying 2-3mm thick wall care putty (JK/Birla) in two or more coats complete all as specified and as directed.

M & L for applying Two coats of water proof exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achive desired finish at any height over a coat of exterior primer complete all as directed. Make:Berger/Asian Paints/Nerolac.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.

S&F Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

S&F Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.

S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of hree track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. (Note:The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F 100mm size stainless steel butt hinges fixing with screws to PVC door frame complete all as specified.

S & F Aluminum Anodised 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size aluminum adodised handles complete all as specified and as directed.

Taking down rolling shutters of any size push pull or manual type incl accessories like shaft, top cover, guide channel etc complete all specified and directed.

S & F Steel rolling shutters (push pull or manual type)1.25mm thick with required Ball bearing for rolling shutters, including shaft, top cover, guide channel (width 75 mm deep, 50mm wide and 3.15mm thick), anchoring rod, hasp and staple erected in position as directed complete including Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

M & L two coat of synthetic enamel paint (finishing coat) over one coat of red oxide primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

S&F 2mm thick colour coated polycarbonate roofing sheet translucent plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, gate etc including taking down old UNSV fibre sheet of any type complete all as specified & directed.

SHIVA ENTERPRISES (BID ID -3150507)

M/s Shubh Enterprises (BID ID -3150976)

A R construction (BID ID -3150794)

M/s Sree Baba Traders (BID ID -3150954)

JPMS BUILDTECH (BID ID -3150184)

sunil traders (BID ID -3150812)

tarun construction co (BID ID -3154242)