Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹16.9 LAccepted-AOC | 1 | Accepted-AOC LOWEST RATE | |
| 2 | 2₹17.9 L+₹96,158 (5.68%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹18.7 L+₹1.7 L (10.2%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹18.7 L+₹1.8 L (10.5%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹20.6 L+₹3.7 L (21.8%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
24 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
REPAIRS TO JOINERY AND ALLIED WORKS TO CERTAIN BUILDINGS IN CAMP AREA AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2022_MES_526954_1
GENP-27/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹40,000
Yes
28 Apr 2023
27 May 2022
25 Jun 2022
27 May 2022
24 Jun 2022
11 Jun 2022
Amount
Taking down chowkhat or frame ( but without taking off shutter from frame) of area not exc. 1.5 sqm each .
All as per item No 1.00 above but area exc 1.5 Sqm and not exc 4.00 Sqm.
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in the same opening after repair complete .
S&F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; including MS butt hinges medium weight 100 mm size (03 Nos per leaf), welding hold fast, hinges to frame etc complete and conforming to Fe-290(Gde E 165)as etc all as specified and as directed.
S&F 35 mm thick factory made flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed.
M&L for second class hard wood factory made 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.
S&F for factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.
S&F for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for fixing of hold fasts and similar item all as specified and as directed.
S&F for mild steel as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete.
S & F in repair prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves, pelmet box etc complete all as specified and as directed.
S&F for butt hinge, stainless steel, ISI Marked 100mm size for PVC door shuter complete all as specified and as directed.
S&F for aluminium sliding door bolt 300 mm long with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long.
S&F for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.
S&F for stainless steel door stopper 150mm long with double legged rubber bushes at the end complete all as specified and as directed.
S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
Hacking out old broken glass, any thickness, size, quality, or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete upto 4th storey complete all as specified and as directed.
S&F for sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane upto 4th storey.
S&F for figured glass pin head type 3mm thick glazing with oil putty in square not exc 0.50 Sqm each panes upto 4th storey.
S & F in repair factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed
S & F in repair factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed
M&L for rubber beading of 50x15mm size for fixing as in door and similar situation including necessary drilling/cutting etc .
S&F in repair 20mm dia aluminium drapery rod, coated finish including teak wood brackets & end knob as required with teak wooden curtain rings complete all as specified and as directed.
M&L for preparation of newly or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.
S&F in repair framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.
M&L in repair 1.00mm thick mild steel, plain, black sheet as in wall cladding, steel gates and similar work, cut to size, holes round headed screws, clout nails or rivets and fixed to steel framing with plain 40mm lap joint with reveted or welded seams, including bending or turning up, mitred angles etc.
Taking down of aluminium doors/window of any type and description and re-fixing in same opening after necessary repairing such as floor spring, locks, hinges, glass, rubber beading, handles, tower bolts etc complete all as specified and as directed.
Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete.
M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings including finishing even and smooth surface without using extra cement.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surface in cement mortar 1:6 including finishing even and smooth surface without using extra cement on walls.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4 including finishing even and fair surface without using extra cement on walls .
M&L for preparing newly plastered surfaces in ceiling including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete .
M&L for preparing newly plastered surface on walls including brooming down or steel wire brushing, scraping down etc and applying two coats of distemper oil emulsion over one coat of alkalic resistent primer all as specified and as directed.
M&L for preparing newly plastered surface on walls including brooming down or steel wire brushing, scraping down etc and applying two coats of cement base paint of approved colour and shade all as specified and as directed.
S & F contineous (piano) hinges, mild steel, width of flap 30mm,bright finish or electrogalvanised.
JAIPAL and BROS
DEV CONSTRUCTION
M/S Davinder Kumar
Kunal Construction Co.
M/S Parshant Associates
Mahesh Enterprises
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .