DAY TO DAY MAINT OF B/R NATURE RELATED TO COMPLAINTS IN KV AREA/10 AFH/ARJAN AREA AND REPAIR/MAINT OF EARTHING OF DISTRIBUTION BOX AND CONNECTED WORKS IN VARIOUS LOCATION AT AFS HASIMARA

Amount

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed.

Fixing only plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed. (Note : Serviceable sheet obtained from dismantling shall be re-used)

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, including disposal of debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.

M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L 15mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L 5mm thick rendering in CM (1:3) on ceiling surfaces/ chajja etc finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (1st grade quality) , complete all as specified and directed.

M & L for complete removal of existing treatment of walls/ceiling surfaces applying 1.5 to 2mm thick wall care putty to obtain a smooth surface including making good any undulations on the surfaces and applying two coats of oil bound distemper over the putty surfaces, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and as directed.

Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F steel water tubing and connection, medium grade, 15mm bore with all fitting fixed to wall and ceiling or laid in floors, complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and as directed.

S&F steel water tubing and connection, medium grade, 20mm bore with all fitting fixed to wall and ceiling or laid in floors,, complete all as specified and directed.

Re-fixing old steel tubing and connection, 20mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down, screwed for iron pipe, compelete all as specified and directed.

S&F in repair CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repair 15mm bore stop cock, chromium plated, cast copper alloy, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

All as per item No 24.00 here-in-before but fancy type, chromium plated with long shank and cup (concealed type), complete all as specified and directed.

S&F in repair 15mm bore angle stop valve, cast copper alloy, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S & F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (minimum wight 210 gms), complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed.

S&F in repair 32mm waste coupling of PTMT (half or full threaded) (minimum weight -45 gms), complete all as specified and directed.

S&F in repair 40mm waste coupling of PTMT suitable for kitchen sink (half or full threaded) (minimum weight -60 gms), complete all as specified and directed.

S&F in repair 140mm grating round of PTMT (minimum wight 50 gm), complete all as specified and as directed.

S&F in repair shower rose 125mm size, brass, chromium plated, with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends, complete all as specified and directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in-let, ball valve, float and handle, 32mm dia flush pipe polythelene or PVC, complete all as specified and directed.

S&F in repair internal assembly including valveless syphon 10 ltrs capacity PVC flushing cistern, complete all as specified and directed.

S&F in repair handle for 10 ltrs PVC flushing cistern, complete all as specified and directed.

S&F in repair inlet ball valve for 10 ltrs PVC flushing cistern, complete all as specified and directed.

S&F in repair float for 10 ltrs PVC flushing cistern, complete all as specified and directed.

S&F in repair of 32mm size PVC collapsible waste pipe for wash hand basin/sink, 800mm long, complete all as specified and directed.

S&F in repair of 40mm size PVC collapsible waste pipe for wash hand basin/sink, 800mm long, complete all as specified and directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) incl P or S trap, complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F vitreous china wash hand basin, white, flat back, size 550 x 400mm size (flat back or angle back type) including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning ends of brackets, complete all as specified.

S&F in repair sinks made of stainless steel with draining board 1mm thick (SS-304), ISI marked, with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm size, complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick (SS-304), ISI marked, with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 410mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm size, complete all as specified and directed.

S&F stainless steel plate rack of size 0.75 x 0.78m standard quality (SS-204) weight not less than 6 kg fixed with brass screw, complete all as specified and directed.

S&F in repair towel rail, 60cm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 63mm bore, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed.

S&F in repair tank cover suitable for rotational moulded polyethylene water storage tanks of any capacity, complete all as specified and directed.

S&F 1st class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc and removing old beads to store, complete all as specified and directed.

S&F in repair 2nd class hardwood plain fillets, square, ractangular or triangular in section area exc 3 Sqcm & n.exc 6sqcm clean sawn, secured with nails, complete all as specified and directed.

S&F in repair 2nd class hardwood plain fillets, square, ractangular or triangular in section area exc 13 sqcm & n.exc 25sqcm clean sawn, secured with nails, complete all as specified and directed.

S&F in repair 2nd class hard wood boarding,15mm thick, clean sawn with butt joints fixed with nails in any situaion as shelves of built-in-cupboard including replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc., complete all as specified and directed.

S&F in repair for 25mm thick wooden grain PVC celuka ply fixed in shelves; partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work fixed with screws/self tapping screws etc, complete all as specified and directed

S&F in repair for 18mm thick wooden grain PVC celuka ply fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work fixed with screws/self tapping screws etc, complete all as specified and directed.

S & F for ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

S&F in repair 100mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 200mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair 75mm size MS butt hinge, medium weight, cold rolled, mild steel, complete all as specified and directed.

S&F in repair 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed.

S & F in repair continuous (piano) hinges,mild steel, width of flap 30mm (when open) bright finish or electrogalvanised, complete all as specified and directed.

S&F in repair mild streel helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F in repair 150mm long extruded aluminium alloy handle, cast type, anodised, complete all as specified and directed.

S&F in repair 100mm long extruded aluminium alloy handle, cast type, anodised, complete all as specified and directed.

S&F in repair mild steel handles for MS windows/vents 75mm long suitable for left/right hand including fixing nut & bolts, complete all as specified and directed .

S&F in repair mild steel casement stays size 300mm with hinged joint and two plates with studs suitable for MS windows and vents, complete all as specified and as directed .

S&F in repair 75mm hasp & staple, safety type, aluminium anodised with mild steel hing pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F 100mm hasp & staple safety type aluminium anodised with mild steel hing pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repair 25mm dia curtain rod MS, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Hacking out old broken glass any thickness size quality or description from metel frame/aluminium frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed.

M&L for sheet glass, 3mm thick, ordinary quality and glazing with oil putty in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (die cast) body designation No 1, universal type, suitable for door shutters up to 700mm in width and weight not more than 35 kg, complete all as specified and directed.

Taking down, repair to aluminium doors, windows, of size exc. 1 Sqm but not exc. 2 Sqm etc by replacing its faulty parts i.e. rollers, hinzes, handles, lock to bring its functional conditions and refixing in the same position, complete all as specified and directed. (Note : Glass shall be measured and paid seperately)

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140mm, fixed on floor, complete all as specified and directed.

S & F in repair 2mm thick ruberised door seal, width exc 30mm but n.exc 50mm, fixed with screw, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed.

Resecuring or easing and adjusting without taking down Shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each, complete all as specified and directed.

M & L for plastering in patches (n. exc. 1 Sqm) to wall, ceiling and applying surface finishes etc, complete all as specified and directed. Note : Quoted rate shall deemed to be included taking down cement plaster, applying adjacent finishes, removel of debris and cleaning the area.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe 410W (Gde E-250) complete all as specified and as directed.

S&F steel windows with side hung shutters (ISI marked), factory fabricated including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed.

S&F steel windows with side hung shutters (ISI marked), factory fabricated including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/ painting required, complete all as specified and directed.

S&F steel ventilator with top hung shutter (ISI marked), factory fabricated including hinges, steel peg stay including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed.

M&L for preparing new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and directed.

M&L for preparing new or previously untreated wooden surfaces of any description, not otherwise described n. exc. 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and directed.

M&L for preparing of new steel & iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backin), removing serviceable tiles to store and rubbish off the premises, complete as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

All as per item No 102.00 here-in before but as in skirting/dado over and including rendering 10mm thick in CM (1:4) as backing coat to receive wall tiles, complete as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm/450 x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, on floors, over and including 15mm thick screed bed of cement mortar (1:6), complete all as specified and directed.

M&L for granite (of any type) tiles 20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over and including rendering 10mm thick in CM (1:4) as backing coat, complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B0 (using 12.5mm grade crushed stone aggregate) as in sub bases, floors and pavings etc, laid in alternate bays (n. exc. 2 Sqm each), complete all as specified and directed. Note :Glass strips shall be measured and paid seperately.

M&L for chequred cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C1 (20mm grade crushed stone aggregate) as in sub base, PCC path and similar works, complete all as specified and directed.

S&F 38mm width glass dividing strips, 3mm thick, inserted in position confirming to design, complete all as specified and directed.

M&L for earthing of equipment at power house/Sub Stn/DB complete with copper earth plate electrode 60 × 60cm × 3.00mm thick , buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to existing earth lead strip by means of bolts, nuts, check nuts and washers of brass or HS steel in any type of soil, connected to earthing test point and and necessary excavation and earth work, PCC (1:2:6) type C-1 as earth pit with pre-cast RCC (1:2:4) type B-1 cover slab size 400 x 400 x 50mm reinforced with 8mm dia TMT bar, 100mm c/c both ways including one handle made of 12mm dia including providing charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 20mm bore galvanized iron watering pipe (light grade) wire mesh, copper lugs, complete in all respect,including Copper earth strip 20 x 3.00mm, protected by 40mm bore (medium grade) galvanized iron pipe up to earthing test point including disposal of soil to a distance not exc 50 mtr and necessary testing on completion including taking out/dismantling of old unserviceable earthing, complete all as specified and directed. Note:- (i) Proper earthing pit should be provided with pit cover. (ii) Copper earth strip beyond 7.5 mtr shall be measured and paid seperately

M&L for earthing of machinery/equipment installed at power house/Sub Stn/ DB complete with galvanised steel earth plate electrode 60 × 60cm × 6mm thick , buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to existing earth lead strip by means of bolts, nuts, check nuts and washers of brass or HS steel all as shown in electrical plate No. 3 connected to earthing test point and and necessary excavation and earth work PCC (1:2:6) type C-1 with suitable size of CI cover plate with angle iron frame and opening arrangement ) incl providing charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 20mm bore galvanized iron watering pipe (light grade) wire mesh, copper lugs, complete in all respect,including galvanised earth lead wire 4.0mm, 15mm bore (medium grade) galvanized iron pipe up to earthing test point as directed, incl disposal of spoil to a distance not exc 50 mtr and necessary testing on completion including taking out/dismantling of old unserviceable earthing of any description, complete all as specified and as directed. Note :- (i) Earth lead wire/strip beyond 7.5 mtr shall be measured and paid separately. (ii) Proper earthing pit should be provided with pit cover.

All as per item No 113.00 here-in- before but using GI earth strip of size 32 x 6mm as earth lead including GI protection pipe of size 40mm bore (medium grade) upto earthing test point, complete all as specified and directed.

S&F in replacement 32 x 6mm Gl strip in short pieces on surface or in recess for inter connecting including taking down old unserviceable strip, complete all as specified and directed.

All as per item No 115.00 here-in before but copper strip 20 x 3.00mm, complete all as specified and as directed.

All as per item No 115.00 here-in before but copper strip 32 x 6.00mm, complete all as specified and as directed.

All as per item No 115.00 here-in before but galvanised earth strip wire 4mm dia, complete all as specified and as directed.

S&F in repair HDPE pipes 40mm bore of pressure rating 6 kgf/cm2 laid in trenches or fixed to walls and ceilings by MS iron clamp nuts bolts etc, with all fittings for protection of earth wire/ earthstrip and fixed complete all as specified and directed.

S&F in repair HDPE pipes 15mm bore of pressure rating 6 kgf/cm2 laid in trenches or fixed to walls and ceilings by MS iron clamp nuts bolts etc, with all fittings for protection of earth wire/ earthstrip and fixed complete all as specified and directed.

M &L for eathing pit in PCC (1:3:6) type C1 pre-cast RCC (1:2:4) type B-1 cover slab of size 300 x 300 x 50mm reinforced with 8mm dia TMT steel bars @ 15cm center to center in both direction and 10mm dia MS handle of suitable size including 20mm bore GI pipe, light grade, for watering, funnel, wire mesh, necessary earth work in soft / loose soil all as shown in Electrical plate No 4 of MES schedule Part -I (2009) and testing and applying three coats of white wash on exposed surface of concrete complete including taking down existing broken earth pit, complete all as specified and directed.

S&F in repair porcelain vitreous white/brown/green spacers insulator of size 75mm x 35mm x 40mm height complete with one number galvanized iron stud bolts 6mm dia x 40mm long including nut & washers and two number galvanized iron fixing bolts of size 6mm dia and 50mm long including washers and drilling holes for holding/foxing aluminium strip/roof conductor, as required, including taking down the broken insulator, complete all as specified and directed.

S&F in repair test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25mm drilled and screwed including 3 Nos. 8mm dia, 25mm long hexagonal head screw, complete all as specified and directed.

M & L for brazing of copper strip including removing of nut, bolt, washer, etc and connecting with equipment directly from earthing, complete all as specified and directed.

Note: An amount of Rs.84,550.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S SANMILAN NANDI (BID ID -3368198)

M/S ANNI ENTERPRISE (BID ID -3368429)

M/S RELIABLE CONSTRUCTION CO. (BID ID -3368256)

M/S MANODEEP CONSTRUCTION (BID ID -3370327)

MAA TARA TRADING (BID ID -3368242)

MAJUMDER ENTERPRISE (BID ID -3369309)