Annual repair, operation & maintenance of Storm Drainage Pumping Station 8( I) Punaichak DPS, 8 (2) S.K Puri, 8 (3) Boring Road, 8 (4) Officers Flat, 8 (5) Dr. Zakir Hussain Institute, 8 (6) 400 Set Rajbanshi Nagar, 8 (7) 800 Set Shastri Nagar & 8 (8) 80 set Rajbanshi Nagar under Nutan Anchal, Patna West (Mecanical) Works Division, BUIDCo, Patna for the years as session 2026-27

NIT-03/Mech/PW/2026-27 Group-08

Name of Work:-Annual repair, operation & maintenance of Storm Drainage Pumping Station 8( I) Punaichak DPS, 8 (2) S.K Puri, 8 (3) Boring Road, 8 (4) Officers Flat, 8 (5) Dr. Zakir Hussain Institute, 8 (6) 400 Set Rajbanshi Nagar, 8 (7) 800 Set Shastri Nagar & 8 (8) 80 set Rajbanshi Nagar under Nutan Anchal, Patna West (Mecanical) Works Division, BUIDCo, Patna for the years as session 2026-27 .

Estimated Cost (Rs.) Rs. 2,99,66,354.00

Earnest Money (Rs.) Rs. 5,99,400.00

Time of initial inspection & testing of thorough repaired all machineries. 15th May 2026

Cost of BOQ (Rs.) Rs. 17,700.00

To be filled by the Bidder

1 Name of the Contractor/Bidder

2 Address of the Contractor/Bidder

Gr 8 (1) Estimate for the work of Annual Repairing, maintenance & operation of electro-mechanical accessorries of the pump sets installed in storm drainage pumping plant at Punaichak monsoon 2026 for the Year 2026-27.

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Total Amount (in Rs.)

Rate In Figure Rate In Word

1 Cost for complete repairing and overhauling of 220 HP VT pump set no.-1 & 2( as per Annexure-1) 2 P/Job 0.00 0.00

2 Cost for complete repairing and overhauling of 175 HP VT pump set no.-3 (as per Annexure-2) 1 P/Job 0.00 0.00

3 Cost for complete repairing and overhauling of 375 HP VT pump set no.-4 (as per Annexure-3) 1 P/Job 0.00 0.00

4 Cost for Repairing and overhauling of 4 nos electric motors by dismantaling the motors, double coat varnishing, heating, loop repairing, replacement of the damaged bearing, assembling with all required consumable materials and testing on load as per Annexure-4 1 P/Job 0.00 0.00

5 Cost for complete repairing and servicing of 375 HP Diesel Engine with supplying all servicing spares, M.oil, gear oil, coupling bolts, battery terminals, new batteries -2 nos., repairing of self starter, alernator ,Air filter,Mobile filter,Diesel filter etc. as per Direction of Engineer-in-charge of storm Drainage Pumping Plant, Punaichak .(As Per Annexture -05) 1 P/Job 0.00 0.00

6 Cost for Complete repairing and overhauling of 375 HP diesel engine pump set and its accessories (As per Annexure-6) 1 P/Job 0.00 0.00

7 Cost for Complete Repairing & Servicing of Panel board & Starter of 2x220 HP & 175 HP VT & 350 HP VT Pump sets of Storm Drainage pumping Plant before Monsoon (As Per Annexture-07). 1 P/Job 0.00 0.00

8 Cost for Complete Reparing,Servicing & filteration of Outdoor Transformer 1x500 KVA With AB Switch & Existing 11 KV Electric Substation as per Direction of Engineer-In-Charge. (As Per Annexture-8) 3 each 0.00 0.00

9 Cost for Complete Reparing,Servicing & filteration of Outdoor Transformer 1x315 KVA With AB Switch & Existing 11 KV Electric Substation as per Direction of Engineer-In-Charge. (As Per Annexture -9) 1 each 0.00 0.00

10 Complete Reparing ,Overhauling ,Servicing & Functionlity of 10 Ton Manual Chain pulley block Over head crane mounted on DPS as Per Direction of Engineer-in-Charge. 1 each 0.00

11 Cleaning & Desilting of Existing sump at DPS by removing mud approx 1.2 m in depth and disposal of the same to away from storm Drainage Pumping Plant, Punaichak .(As Per Annexture -10) 1 P/Job 0.00 0.00

12 Earthing with copper earth plate 600mmx600mmx3mm thick imcluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. (but without charcoal/coke and salt as required. 2 P/Job 0.00

13 Cost for Providing & Installation of New M.S gratings (Double Coat painting)with required size & Shape of M.S Channel & M.S Flat (Thick 10 mm)as Per Direction of Engineer- in -Charge at storm Drainage Pumping Plant. 1 P/Job 0.00

14 Cost for Deployment of 6 nos. x 3 shifts sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st june 2026 to 15th Oct 2026 and during rest period 02 no. x 1 shift from 01.4.2026 to 31.05.2026 & 16th Oct.2026 to 31.03. 2027 ..(The no. of sweeper may increase as per situation arisen due to heavy rain fall). shift 2922 0.00

15 Cost for Deployment of 2 nos. x 3 shifts Highly skilled technician cum pump operators during the monsoon period 1st june 2026 to 15th Oct 2026 and during rest period 01 no. x 3 shift from 01.4.2026 to 31.05.2026 & 16th Oct.2026 to 31.03. 2027 (The no. of pump operators may increase as per situation arisen due to heavy rain fall). P/Shift 1506 0.00

16 Maintenance of miscllanious work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at DPS. The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer,Maintenance of new supply pump & transformer per annum, panel, starters, bearing replacing, Cleaning of Campus, Sprinkling of Bleaching Powder, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, , proper flood light, fan, chair, rubber mat, Log book ABC store press ( 4 kg - 02 nos)& Carbon dioxide (4 kg- 02 nos.) type fire extingusher required for safety purpose, Spray Painting, misc type of all civil releted work, light wiring, exhaust fan,Name plate of buidco.wall painting, Recharge of CCtv ,availability of 24 hrsx 365 days in sufficient quantity of saftey materials,black stone (ballast) transportation and loading, unloading of any equipment/material, repairing of Civil structure during emergency for water draining as per Direction of E/I. Payment will be made only if work other than the above 15 items is done. 1 P/Job 0.00

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (in Rs.)

Rate In Figure Rate In Word

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 220 HP VT motor and pump and all electrical connection of motor, taking down motor from from its base by top lifting of motor from motor stool and stacking the motor at proper place 1 p/job 0.00

2 Cost for providing labour, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc. of 220 HP VT pump. 1 p/job 0.00

3 Cost for transportation of pump accessories and motor from DPS to work shop and workshop to DPS including hydra and transport vehicle etc. with loading and unloading 1 p/job 0.00

4 Cost for complete opening of 220 HP motor part by part & taken out of top & bottom bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size. 1 p/job 0.00

5 S/F of DE and NDE SKF 6322C3 bearings 1 each 0.00

6 S/F of DE and NDE SKF 6319 C3 bearings 1 each 0.00

7 Cost for greasing the bearing of motor and varnishing, heating & taping of enamelled copper winding wire including required materials like grease and varnish-6 lit. etc. 1 p/job 0.00

8 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place etc. 1 p/job 0.00

9 Cost for opening and dismentling of bowl assembly of 220 HPVT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. 1 p/job 0.00

10 Cost for checking pump shaft, head shaft & line shaft on lathe for straightness and strenghtening the same on hydraulic press machine. 3 each 0.00

11 Remetaling and rethreading at both ends upto 3" length on top and line shaft. 3 each 0.00

12 Cost of making, supply and fitting line shaft bronze bush of size 95mm ID 115mm OD 200mm length 2 each 0.00

13 Cost for making and supplying stuffing box bronze bush of size 93mm ID 113mm OD 175mm length 1 each 0.00

14 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size 93mm ID 110 OD 175mm Length 2 each 0.00

15 Cost of making, supply and fitting bell mouth bronze bush of size 90mm ID 105mm OD 200mm length 1 each 0.00

16 Cost for supply and fitting of SS 416 shaft sleeve of size 95mm ID 115mm OD 210mm length 2 each 0.00

17 Cost for making and supplying lantern ring of appropriate size 1 p/job 0.00

18 Cost for repairing of rachet plate by doing CI welding, grinding & finishing and making 12 nos, sharp edge of proper size and sample by grinding machine 1 p/job 0.00

19 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 p/job 0.00

20 Cost for supplying and fitting following:-

(i) 'o' rings 3 each 0.00

(ii) Stuffing box packing 5 kg 0.00

(iii) Key for shaft sleeve 1 each 0.00

(iv) Key for pump shaft. 1 each 0.00

(v) Ratchet pin SS 410 8 each 0.00

21 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc. in bowl housing in the work shop 1 p/job 0.00

22 Cos for scrathing old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black japan paint. 1 p/job 0.00

23 Cost for supplying and fitting SS bolts & nuts with plane and spring washers of size……………for discharge header and column pipe. 55 each 0.00

24 Cost for supplying and fitting SS bolts & nuts with plane and spring washers of size……………for bowl mouth assembly. 72 each 0.00

25 Cost for supply of TVS make steel bolts with threading on both ends complete with washer and nuts as per size & sample 8 each 0.00

26 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) 40 kg 0.00

27 Cost for fitting materials such as cotton waste, grease, gland packing, emery paper, petrol etc required at the time of fitting of pump. 1 p/job 0.00

28 Cost for supplying and filling mobile 20 p/ltr 0.00

29 Cost for fitting of pump accessories and lowering such as ccolumn pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. 1 p/job 0.00

30 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing on full load. 1 p/job 0.00

31 Deduct : Cost of scrap materials Bronze -6 p/kg 0.00

32 Deduct : Cost of scrap materials Stainless steel -5 p/kg 0.00

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (in Rs.)

Rate In Figure Rate In Word

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 175 HP VT motor and pump and all electrical connection of motor, taking down motor from from its base by top lifting of motor from motor stool and stacking the motor at proper place 1 p/job 0.00

2 Cost for providing gas cutting set and mask with skilled welder and helper for cutting out the jam nut bolts under floor platform. 1 p/job 0.00

3 Cost for providing labour, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc. of 425 HP VT pump including hydra/crane etc. 1 p/job 0.00

4 Cost for transportation of pump accessories from DPS to work shop and workshop to DPS including hydra and transport vehicle etc. with loading and unloading 1 p/job 0.00

5 Cost for greasing for bearing of motor including labour, tools, tackles and requisite material like grease. 1 p/job 0.00

6 Cost for opening and and dismentling of bowl assembly of 425 HPVT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. 1 p/job 0.00

7 Cost for checking pump shaft, head shaft & line shaft on lathe for straightness and strenghtening the same on hydraulic press machine. 3 each 0.00

8 Remetaling and rethreading at both ends upto 3" length on top and line shaft. 3 each 0.00

9 Cost of making, supply and fitting line shaft bronze bush of size 78mm ID 128mm OD 205mm length 2 each 0.00

10 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size 79mm ID 128 OD 205mm Length 2 each 0.00

11 Cost of making, supply and fitting upper and lower bearing bronze bush of required size 2 each 0.00

12 Cost for supply and fitting of SS 416 shaft sleeve of size 78mm ID 128mm OD 205mm length 1 each 0.00

13 Cost for making and supplying lantern ring of appropriate size 1 p/job 0.00

14 Cost for supplying and fitting following:-

(i) 'o' rings 3 each 0.00

(ii) Stuffing box packing 5 kg 0.00

(iii) Key for shaft sleeve 1 each 0.00

(iv) Key for pump shaft. 1 each 0.00

(v) Ratchet pin SS 410 8 each 0.00

15 Cost for repairing of rachet plate by doing CI welding, grinding & finishing and making 12 nos, sharp edge of proper size and sample by grinding machine 1 p/job 0.00

16 Cos for scrathing old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black japan paint. 1 p/job 0.00

17 Cost for supplying and fitting SS bolts & nuts with plane and spring washers of size……………for discharge header and column pipe. 75 each 0.00

18 Cost for supplying and fitting SS bolts & nuts with plane and spring washers of size……………for bowl mouth assembly. 72 each 0.00

19 Cost for supply of TVS make steel bolts with threading on both ends complete with washer and nuts as per size & sample 20 each 0.00

20 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) 50 kg 0.00

21 Cost for supplying and filling mobile 30 p/ltr 0.00

22 Cost for fitting of pump accessories and lowering such as ccolumn pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. 1 p/job 0.00

23 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing on full load. 1 p/job 0.00

24 Deduct : Cost of scrap materials Bronze -5 p/kg 0.00

25 Deduct : Cost of scrap materials Stainless steel -4 p/kg 0.00

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (in Rs.)

Rate In Figure Rate In Word

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 350 HP VT motor and pump and all the electrical connections of motor, taking down motor from its base by top lifting motor from motor stool and stacking the motor at proper place 1 p/job 0.00

2 Cost for providing all labour, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc. of 350 HP VT Pump from sump. 1 p/job 0.00

3 Cost for opening and dismantling of bowl mouth assembly of 350 HP VT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes etc. in workshop. 1 p/job 0.00

4 Cost for checking of pump shaft, head shaft & line shaft on lathe for straightness and straightening the same on hydraulic press machine. 3 each 0.00

5 Cost of remetailling & rethreading at both ends upto 3'' length on top shaft & line shaft. 3 each 0.00

6 Cost of supply and fitting O ring of different size. 40 p/m 0.00

7 Cost for making and supplying shaft bronze bush of size. ID 81 mm OD 95 mm Length 155 mm 3 each 0.00

8 Cost for making and supplying stuffing box bronze bush of size ID 81 mm OD 95 mm Length 175 mm 1 each 0.00

9 Cost for making and fitting of SS 410 shaft coupling by cutting and making internal thread of size. ID 75 mm OD 100 mm Length 180 mm 1 each 0.00

10 Cost for making and supplying lower bearing bush for bearing holder of discharge case of size. ID 90 mm OD 115 mm Length 200 mm 1 each 0.00

11 Cost for making and supplying upper bearing bush for discharge case of size. ID 81 mm OD 96 mm Length 90 mm 1 p/job 0.00

12 Cost for making and supplying lantern of size. ID 81 mm OD 115 mm Length 42 mm 1 p/job 0.00

13 Cost for supply and fitting of distance sleeve as per sample and size. 2 each 0.00

14 Cost for supplying and fitting following with GST @ 18%, CP @10% & L Cess @ 1% :-

(i) Stuffing box packing 1 each 0.00

(ii) Key for shaft sleeve. 1 each 0.00

(iii) Key for pump shaft. 1 each 0.00

(iv) Rubber coupling bush. 1 each 0.00

(v) Steel coupling bolts. 6 each 0.00

(vi) Ratchet pin SS 410. 8 each 0.00

15 Cost for repairing of ratchet plate by doing CI welding, grinding & finishing and making 12 nos sharp edges of proper size and sample by grinding machine. 1 p/job 0.00

16 ost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc in bowl housing in the workshop. 1 p/job 0.00

17 Cost for transportation of pump and its accessories from Pahari Old pump house to workshop and back to pump house including all cost of labour charge for loading & unloading. 1 p/job 0.00

18 Cost for scratching old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black japan paint. 1 p/job 0.00

19 Cost for supplying and fitting SS bolts & nuts with plain & spring washers of size 22 mm dia. X 100 mm long for discharge header & column pipe. Make - TVS. 72 each 0.00

20 Cost for supplying and fitting SS bolts & nuts with plain & spring washers of size 22 mm dia x10mm long for bowl mounth assembly. Make - TVS. 64 each 0.00

21 Cost for supplying of TVS make steel bolts with threading on both ends complete with wasdher & nuts as per size & sample. 8 each 0.00

22 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black). 40 p/kg 0.00

23 Cost for fitting materials such as cotton waste - 5 kg, grease - 3 kg gland packing - 2 kg, emery paper - 10 sheets, K oil - 8 lts. Etc required at the time of fitting of pump. 1 p/job 0.00

24 Cost for supplying and filling mobil. 20 p/job 0.00

25 Cost for fitting of pump accessories and lowering such as column pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. 1 p/job 0.00

26 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing the pump on load. 1 p/job 0.00

27 Deduct : Cost of Scrap materials Bronze -1 p/kg 0.00

28 Deduct : Cost of Scrap materialsStainless steel. -1 p/kg 0.00

Sl. No. Particulars of work Unit Qty. Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of VT motor & pump and all the electrical connections of motor, taking down motor from its base by top lifting of motor from motor base and stacking the motor at proper place. p/job 4 0.00

2 Cost for complete opening of VT motor part by part & taken out of top & bottom bearing from bearing houshing and repairing of bearing houshing with weilding with C.I electrode, turning, and finishing as required shape and size. p/job 4 0.00

3 Cost for greasing the bearing of motor and varnishing,heating & taping of enamelled copper winding wire including required materials like grease and varnish-6 lit.etc. p/job 4 0.00

4 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place etc. p/job 4 0.00

5 Cost for providing all labours, tools and tackles at site for fitting of VT motor on foundation base and refitting nut bolts & testing also. each 4 0.00

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (in Rs.)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 375HP diesel engine of Greaves make by checking of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc. all complete. 1 P/Job 0.00

2 Cost for supplying and fitting following with 18% GST, 10% CP & 1% labour cess :-

(i) Air filter 1 Each 0.00

(ii) Diesel filter set 1 P/Set 0.00

(iii) Lubcicating oil filter 2 Each 0.00

(iv) Set of Hoses 1 P/set 0.00

(v) Fuel Flexible pipe 1 P/Set 0.00

(vi) Gear oil for gear box 20 Ltr container 1 P/Cane 0.00

(vii) Coolant 5 ltr cane 1 P/Cane 0.00

(viii) V Belt 3 Each 0.00

(ix) Set of sealing rings 1 Each 0.00

(x) Coupling rubber 8 Each 0.00

(xi) Magnetic pick up 1 Each 0.00

(xii) Lubricating oil 40 P/Ltr. 0.00

3 Cost repairing of electrical panel of diesel engine by replacing all burnt and damaged electrical wires and fuses and checking the electrical panel including the cost of labour and electricians. 1 P/job 0.00

4 Cost for repairing of self starter by replacing all carbon brush, GM bush, bearings, solenoid etc. by experienced mechanic in workshop including the cost of materials. 1 P/job 0.00

5 Cost for repairing of alternator by dismantaling, petrol washing the entire components, changing of all damaged spares, carbon brushes, bearing and cooling fan etc. as required during repairing. 1 P/Job 0.00

6 Cost for repairing of rediator by checking the leakages from copper tubes, repairing & soldering by gas welding machine, changing the rotten out copper tubes with providing copper fins, repair of the raditor holding frame , rubber pad and painting of the same. 1 P/Job 0.00

Sl. No. Particulars of work Unit Qty. Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 375 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, bearing housing and taking out of bearing housing together with impeller coupling and pump shaft. P/job 1 0.00

2 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. P/job 1 0.00

3 Cost for remetalling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labours, tools & tackles etc. P/job 1 0.00

4 Cost for making, supply and fitting of bronze nush including cutting. Turning, polishing and finishing of size 100 mm ID x 122 mm OD x 220 mm Length Each 1 0.00

5 Cost for supply and fitting of S cylindercal roller bearing no. SKF 3322 A equivalent for 375 HP pump with GST, CP and Labour Cess. Each 2 0.00

6 Cost for supply and fitting of spherical Roller bearing no. SKF 3322 a equivalent for 375 HP Electric pump with GST,CP & labour cess etc Each 1 0.00

7 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. p/set 1 0.00

8 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. p/job 1 0.00

9 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. p/job 1 0.00

10 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. p/set 1 0.00

11 Cost for fitting consumable materials such as grease, gland packing 5/8", cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. p/job 1 0.00

12 Cost for supplying al labours, tools & tackles at size for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing on unload. P/job 1 0.00

13 Providing all labours, tools, tackles for installation of 375 HP C/F pump on foundation,refitting nut-bolt & testing on unload at DPS. P/job 1 0.00

14 Cost for supplying and fitting bolts and nuts of different sizes with washer including labours, tools & tackles. P/kg 10 0.00

15 Cost for supplying and fitting SS coupling bolt as per size and sample including labours, tools & tackles Each 10 0.00

16 Deduct: Cost of scrap materials stainless steel P/kg -2 0.00

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (in Rs.)

Rate In Figure Rate In Word

1 Cost for providing all arrangements, labours, tools and tackles at site for servicing LT distribution panel board by decarbonising its all contact joints, bushes washing with petrol, proper insulating of cable terminal with requisite kind of tapes and reapair its all internal wiring of 220 HP VT pump set. 1 p/job 0.00

2 Cost for providing all arrangements, labours, tools and tackles at site for servicing LT distribution panel board by decarbonising its all contact joints, bushes washing with petrol, proper insulating of cable terminal with requisite kind of tapes and reapair its all internal wiring of 350 HP VT pump set. 1 p/job 0.00

3 Cost for providing all arrangements, labours, tools and tackles at site for servicing LT distribution panel board by decarbonising its all contact joints, bushes washing with petrol, proper insulating of cable terminal with requisite kind of tapes and reapair its all internal wiring of 2x425 HP VT pump set. 2 p/job 0.00

4 Cost for cutting and removing old and damaged aluminium cable socket of panel board, rotor controller starter MCCB & motor and doing cable socketing of 240 mm² cable including the cost of cable socket and required insulating material. 36 each 0.00

5 Cost for providing all labours, tools and tackles at site for opening & dismantling all internal wiring copper bus bars of 1x220 HP pump sets starter, removing dust and foreign materials by blowing machine, cleaning and wahing all the internal joints & components with petrol and greasing them properly and resetting all complete job. 1 p/job 0.00

6 Cost for providing all labours, tools and tackles at site for opening & dismantling all internal wiring copper bus bars of 1x350 HP pump sets Soft starter, removing dust and foreign materials by blowing machine, cleaning and wahing all the internal joints & components with petrol and greasing them properly and resetting all complete job. 1 p/job 0.00

7 Cost for providing all arrangements, labours, tools and tackles at site for opening & dismantling all internal wiring copper bus bars of 2x425 HP pump sets starter, removing dust and foreign materials by blowing machine, cleaning and wahing all the internal joints & components with petrol and greasing them properly and resetting all complete job. 2 p/job 0.00

8 Cost for supplying and fitting followings for 2x425 HP starter no.2 & 3 & 220 HP & 350 HP starter including GST @18%, CP @10%, L.Cess@1%.

(i) MNX 650 Contactor 4 each 0.00

(i) MNX 550 Contactor 1 each 0.00

(iii)Cost for supply of overload relay with 630-1000Amp LR1F1000. Make - C & S 1 each 0.00

(iv)Cost for supply of timer 0-30 sec. Type PCNKRTPCN 11*0 for AC current make 2 each 0.00

(v) Thermal overload relay with relay setting range 100-160 Amp. Make C & S 12 each 0.00

9 Cost for providing all labours, tools suitable tacklees & an electrician for opening and dismantling all the contactors, timer, overload relay and other components of the starter, cleaning the starter by air blowing to remove dust & vermins, washing all the components with petrol, resetting the starter by replacidng burnt & damaged contactors and their accessories, tapping all the bus bars by rapping pvc tapes including the cost of pvc tape, petrol etc all complete job. 4 p/job 0.00

10 Cost for supplying & fitting following for 220 HP starter including GST @18%, CP @10%, L.Cess@1%.

(i) Cost for supply of LCIFDP 330AE contactor Make - C & S (Base price Rs. 36300.00) 3 each 0.00

11 Cost for cutting and removing old and damaged aluminium cable socket of panel board & starters and doing cable socketing of 240 mm² cable of cable socket and required insulating material. 81 each 0.00

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (in Rs.)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 500 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 P/job 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 P/job 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 P/job 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 6 Each 0.00

(ii) LT bush 6 Each 0.00

(iii) HT stud of copper 6 Each 0.00

(iv) HT bush 6 Each 0.00

(v) Rubberized gasket 1 Each 0.00

5 Cost for supplying and filling of tranformer oil. 430 P/ltr. 0.00

6 cost for transformer oil filtration 430 P/ltr. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 6 Each 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 P/job 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 P/job 0.00

10 Cost for supplying & fitting following spares. :-

i. Post insulator. 2 Each 0.00

ii. Horn gap fuse. ( 1 pcs = 3 nos.) 2 Each 0.00

iii. Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Each 0.00

iv. Copper wire 6 SWG. 2 P/kg 0.00

v. GI bolts & nuts with washer of different sizes 1.5 P/kg 0.00

vi. Knife type male & female contact for 400 Amp. AB switch. ( 1 Pcs = 3 nos) 1 Each 0.00

vii Lightening arrestor for 11 KV sub station 1 p/set 0.00

viii Rabit conductor for connection of main ncoming feeder. 5 P/M 0.00

ix Fuse wire 19 no. 0.5 P/kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 p/mtr 0.00

12 Deduct : Cost of Scrap materials Copper -4 P/kg 0.00

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (in Rs.)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 315 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 P/job 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 P/job 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 P/job 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 6 Each 0.00

(ii) LT bush 6 Each 0.00

(iii) HT stud of copper 6 Each 0.00

(iv) HT bush 6 Each 0.00

(v) Rubberized gasket 1 Each 0.00

5 Cost for supplying and filling of tranformer oil. 300 P/ltr. 0.00

6 cost for transformer oil filtration 300 P/ltr. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 6 Each 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 P/job 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 P/job 0.00

10 Cost for supplying & fitting following spares. :-

(i) Post insulator. 2 Each 0.00

(ii)Horn gap fuse. ( 1 pcs = 3 nos.) 2 Each 0.00

(iii)Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Each 0.00

(iv) Copper wire 6 SWG. 2 P/kg 0.00

(v) GI bolts & nuts with washer of different sizes 1.5 P/kg 0.00

(vi) Knife type male & female contact for 400 Amp. AB switch. ( 1 Pcs = 3 nos) 1 Each 0.00

(vii) Lightening arrestor for 11 KV sub station 1 p/set 0.00

(viii) Rabit conductor for connection of main ncoming feeder. 5 P M 0.00

(ix) Fuse wire 19 no. 0.5 P/kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 p/mtr 0.00

12 Deduct : Cost of Scrap materials Copper -4 P/kg 0.00

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (in Rs.)

Rate In Figure Rate In Word

1 Cost for supplying all labours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank, Drain,approach chhannel and inlet chamber, outlet chamber etc of DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site. 207 p/m3 0.00

(iv) Discharge side =40' x(18'+20')/2 x3' =2280 cft = 64.62 cum

2 Cost for supplying all labour, tools & tackles at site for dry lift and disposal of soils and foreign materials to a East Corner of Pump house.with loading & unloading charge all complete (70% of total taken and site)as Per Direction of Engineer-In-Charge. 656 p/m3 0.00

Gr 8 (2) Name Of Work :- Estimate For Annual repair, operation & maintenance of Storm Drainage Pumping Station SK PURI DPS for the year 2026-27.

SI. Description Of Work Qty unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Centrifugal pump and motor 100/120 HP having Q= 612 lps (SK PURI- 1x100, 1x120HP) (As per Annexure - 1) 2 job 0.00 0.00

2 Centrifugal pump and motor 75 HP having Q= 500 lps (SK PURI- 2x75 HP) (As per Annexure - 2) 2 job 0.00 0.00

3 FASD starter of 140 amp for 100/120 HP CF pump ( As per Annexure - 1A ) 2 job 0.00 0.00

4 FASD starter of 110 amp for 75 HP CF pump ( As per Annexure - 2A ) 2 job 0.00 0.00

5 (a)Outdoor Transformer 315 KVA, AB Switch & DP Structure of 11 KV Electric Sub-station. (As per Annexure - 3) 1 job 0.00 0.00

(b)Outdoor Transformer 200 KVA, AB Switch & DP Structure of 11 KV Electric Sub-station. (As per Annexure - 4) 1 job 0.00 0.00

6 Vacuum pump - 10 HP (SK PURI- 2 nos.) ( As per Annexure - 5) 2 job 0.00 0.00

7 Diesel engine pump - 38 HP ( As per Annexure - 6 ) 1 job 0.00 0.00

8 Diesel engine - 38 HP ( As per Annexure - 7 ) 1 job 0.00 0.00

9 Cost of desilting of Existing silt deposition in inlet, outlet drain, sump, extra area. (As per Annexure - 8) 1 job 0.00 0.00

10 Cost for dismentalling, repairing, servicing and refitting of butterfly valve of for 100 HP of SK Puri by making spindle groove, change of GM bush, rubber insertion etc. all complete job including labour, tool and tackles. 1 job 0.00

11 Repairing of water level Gauge as per direction of E/I 1 Job 0.00

12 Complete the Mention Misc. work as per instruction of E/I:- 1 job 0.00

A. Providing & Instalation of name plate of Buidco.

B. Writing the name details of officers & Pump operator, Sweeper on the wall with paint.

C. Providing Log book & other Required registers/Misc.

D. Providing & Installation of Fire Extinguisher.

E. Providing & availablity of 24 hrs x 365 days in sufficient Qty. required Safety materials as per Instruction of E/I.

13 Deployment of road sweepers 1095 Staff 0.00

SK PURI - 1 no. x 3 shifts from 01.04.2026 to 15.10.2026 and 1 no. x 3 shifts from 16.10.2026 to 31.03.2027 (1095 shift)

14 Deployment of Pump Operators (highly skilled labour) 1506 Staff 0.00

SK PURI - 1 no. x 3 shifts from 01.04.2026 to 31.05.2026, 02 nos. x 3 shifts from 01.06.2026 to 15.10.2026, and 1 no. x 3 shifts from 16.10.2026 to 31.03.2027 (1506 shift)

15 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at SK PURI DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, transportation and loading, unloading of any equipment/material, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge, servicing 5 ton chain pulley etc. as per Direction of E/I. 1 job (lumpsum) 0.00

Name of work - Estimate for repairing and servicing of 100/120 HP CF pump and motor.

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 100 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 100 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing 6319 C3 of SKF Make, if required including all labour tools and tackles 2 nos. 0.00

5 Cost for bearing greasing, taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

6 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

9 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 1 no. 0.00

88 mm ID x 112 mm OD x 200 mm length

10 Cost for supply and fitting of deep groove ball bearing no. SKF 6318 or equivalent for 100 HP Electric pump with GST,CP & labour cess etc 2 nos 0.00

11 Cost for supply and fitting of thrust bearing no. SKF 51118 in DE or equivalent for 100 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

12 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

13 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00

14 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

17 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

18 providing all labours, tools, tackles for installation of 100 HP C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 10 Kg 0.00

20 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackle TVS make. 10 nos 0.00

21 Deduct : Cost of Scrap materials of bronze 5 Kg 0.00

Name of work - Estimate for repairing and servicing of 75HP CF pump and motor

Sl. Particulars Qty unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 75 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 75 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing 6319 C3 of SKF Make, if required including all labour tools and tackles 1 nos. 0.00

5 Cost for bearing greasing, taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

6 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

9 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. 1 no. 0.00

10 Cost for supply and fitting of angular contact ball bearing no. SKF 3213A for DE or equivalent for 75 HP Electric pump with GST,CP & labour cess etc 2 nos 0.00

11 Cost for supply and fitting of thrust bearing no. angular contact SKF 3313 A in NDE or equivalent for 75 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

12 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

13 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 Set 0.00

14 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

17 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

18 providing all labours, tools, tackles for installation of 75 HP C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 10 Kg 0.00

20 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackle TVS make. 10 nos 0.00

21 Deduct : Cost of Scrap materials of bronze 5 Kg 0.00

Name of work - Repairing of 100 FASD air break Starter cum control panel for operation of 100/120 HP CF motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 100 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting, contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor MNX 140 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (84.6 - 135) Amp 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

Multifunction LED meter CI 0.5s 1 no. 0.00

Selector switch 16 Amp 2 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Name of work - Repairing of FASD air break Starter cum control panel for operation of 75 HP CF motor pump

SI.No Particular Qty unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 75 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting, contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor MNX 110 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (84.6 - 135) Amp 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

Multifunction LED meter CI 0.5s 1 no. 0.00

Selector switch 16 Amp 2 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Name of work - Estimate for repairing of transformer of 315 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 315 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 100 ltrs. 0.00

6 cost for transformer oil filtration 200 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Name of work - Estimate for repairing of transformer of 200 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 200 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 job 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 job 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 job 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 100 ltrs. 0.00

6 cost for transformer oil filtration 150 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

(i) Post insulator. 2 Pcs 0.00

(ii)Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

(iii)Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

(iv) Copper wire 6 SWG. 2 kg 0.00

(v) GI bolts & nuts with washer of different sizes 1.5 kg 0.00

(vi) Rabit conductor for connection of main ncoming feeder. 5 M 0.00

(vii) Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper 4 kg 0.00

Name of work - Estimate for opening, dismantling and repairing of 10 HP vacuum pump

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labour, tools and tackles at site for opening electrical connection of 10 HP vacuum pump motor, foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00

2 Cost for dismantling of 10 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00

3 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00

5 Cost for making supplying and fitting GM bush as per sample. 1 nos. 0.00

6 Cost for supplying and fitting ball bearing if required.. 1 nos. 0.00

7 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00

8 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00

9 Cost for providing all labour, tools and tackles for reinstallation of motor and pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00

10 Cost for cutting and removing burnt cable sockets and doing cable socketing of 6 mm² 3 core copper cable of both motor and starter. 3 nos. 0.00

11 Cost for supplying and fitting of 3 core 6 mm2 copper cable from starter panel to 10 HP motor. 20 mtr 0.00

Name of work - Estimate for repairing and servicing of 38 HP CF pump

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 38 HP CF pump from engine and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

4 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

5 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 1 no. 0.00

36 mm ID x 60 mm OD x 150 mm Length

6 Cost for supply and fitting of deep groove Roller bearing no. SKF for DE & NDE or equivalent for 38 HP diesel pump with GST,CP & labour cess etc 2 nos 0.00

7 Cost for supply and fitting of thrust Roller bearing no. SKF for DE or equivalent for 38 HP diesel pump with GST,CP & labour cess etc 1 nos 0.00

8 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

9 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

10 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

11 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

12 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

13 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

14 providing all labours, tools, tackles for installation of 38 HP motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

15 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 6 Kg 0.00

16 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 4 nos 0.00

17 Deduct : Cost of Scrap materials of bronze -4 Kg 0.00

Name of Work : - Estimate for servicing of 38 HP diesel engine, its accessories

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 38 HP diesel engine of Kirloskar make by repairing of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc. all complete. 1 job. 0.00

2 Cost for supplying and fitting/filling following :-

Air filter 1 no. 0.00

Diesel filter 1 set 0.00

Lubricating oil filter 2 no. 0.00

mobile 3 lit 0.00

Set of hoises 1 set 0.00

Set of flexibles 1 set 0.00

Fuel off solenoid switch 12 v DC for fuel pump 1 no. 0.00

Relay in electrical panel 2 no. 0.00

Set of sealings 1 set 0.00

Rocker cover joints 2 no. 0.00

Coolant 3 ltr 0.00

3 Adjust/Replace(if necessary) V belt condition and tension, Thermostat element,valve clearance, fasteners, exhaust silencer. 1 job. 0.00

4 Radiator cleaning and repairing of radiator fines externally,radiator tube internally. 1 job. 0.00

5 Supply, installation and testing of new battery if required capacity to operate the engine and deducting cost of old battery as per direction of E/I. 1 job. 0.00

6 S/F battery cable and terminal etc as required. 2 no. 0.00

7 S/F battery terminal wire of length 2 mtr. etc as required. 2 no. 0.00

8 Complete overhauling and refitting of self starter by changing the bearing,carbon brush,bushes, nut bolt,washer etc as required during overhauling. with all required materials . 1 Job. 0.00

9 Repairing, overhauling and refitting of alternator with changing its burnt armature,carbon brush,bearings, bushes etc as required. 1 Job. 0.00

Name of work- Estimate for cleaning and desilting of sump approach channel, outlet channel etc.

Sl. No. Particulars Quantity Rate In Rs. (To be filled by the Bidder) Amount(Rs.)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Road Sweeper Analysis for desilting, Cost @ 550/day

Assume 1 sweeper required for 1 m3

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

complete cleaning of filled up sump in all lift and disposal of soil up to a lead of 50 mtr. as required and including all labour, tools & tackles

1 SK PURI DPS 25.23 m3 0.00

Cost for providing all labours, tools and tackles at site for repairing, removing rust,dust, scale, smokes etc. from old surface and painting two or more coats with anticorrosive bituminous paint of approved brand of two MS grating and channel. 1 job 0.00

Gr 8 (3) Name Of Work :- Estimate For Annual repair, operation & maintenance of Storm Drainage Pumping Station BORING ROAD DPS for the year 2026-27

SI. Description Of Work Qty unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Centrifugal pump and motor 40 HP having Q= 100 lps (BORING ROAD - 2x40 HP) (As per Annexure -1 ) 2 job 0.00 0.00

2 Centrifugal pump and motor 30 HP having Q= 75 lps (BORING ROAD - 2x30 HP) (As per Annexure - 2) 2 job 0.00 0.00

3 FASD starter of 60 amp for 40 HP CF pump ( As per Annexure - 1A ) 2 job 0.00 0.00

4 FASD starter of 60 amp for 30 HP CF pump ( As per Annexure - 2A ) 2 job 0.00 0.00

5 Vacuum pump - 10 HP ( BORING ROAD - 2 nos,) ( As per Annexure - 03 ) 2 job 0.00 0.00

6 Diesel engine pump - 38 HP ( As per Annexure - 04 ) 1 job 0.00 0.00

7 Diesel engine - 38 HP ( As per Annexure - 5 ) 1 job 0.00 0.00

8 Cost of desilting of Existing silt deposition in inlet, outlet drain, sump, extra area. (As per Annexure - 6) 1 job 0.00 0.00

9 Cost for dismentalling, repairing, servicing and refitting of butterfly valve of for 40 HP of Boring Road by making spindle groove, change of GM bush, rubber insertion etc. all complete job including labour, tool and tackles. 2 job 0.00

10 Repairing of water level Gauge as per direction of E/I 1 Job 0.00

11 Spray painting over double coat of paint with red oxide primer of all existing MS structure & all electromechanical equipments by removing old paint etc as required. 1 job 0.00

12 Complete the Mention Misc. work as per instruction of E/I:- 1 job 0.00

A. Providing & Instalation of name plate of Buidco.

B. Writing the name details of officers & Pump operator, Sweeper on the wall with paint.

C. Providing Log book & other Required registers/Misc.

D. Providing & Installation of Fire Extinguisher.

E. Providing & availablity of 24 hrs x 365 days in sufficient Qty. required Safety materials as per Instruction of E/I.

13 Deployment of road sweepers 867 Staff 0.00

BORING ROAD - 1 no. x 2 shifts from 01.04.2026 to 31.05.2026, 01 no. x 3 shifts from 01.06.2026 to 15.10.2026, and 1 no. x 2 shifts from 16.10.2026 to 31.03.2027 (867 shift)

14 Deployment of Pump Operators (highly skilled labour) 1506 Staff 0.00

BORING ROAD - 1 no. x 3 shifts from 01.04.2026 to 31.05.2026, 02 nos. x 3 shifts from 01.06.2026 to 15.10.2026, and 1 no. x 3 shifts from 16.10.2026 to 31.03.2027 (1506 shift)

15 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at BORING ROAD DPS. The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, transportation and loading, unloading of any equipment/material, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge etc. as per Direction of E/I. 1 job (lumpsum) 0.00

Name of work - Estimate for repairing and servicing of 40 HP CF pump and motor

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 40 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 40 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing N 313 ECP of SKF Make, if required including all labour tools and tackles 2 nos. 0.00

5 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

6 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

9 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 1 no. 0.00

53 mm ID x 77 mm OD x 150 mm Length

10 Cost for supply and fitting of deep groove ball bearing no. SKF 6211 2RS1 or equivalent for 40 HP Electric pump with GST,CP & labour cess etc 2 nos 0.00

11 Cost for supply and fitting of thrust bearing no. SKF 51211 in DE or equivalent for 40 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

12 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

13 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

14 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

17 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

18 providing all labours, tools, tackles for installation of 40 HP motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 10 Kg 0.00

20 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 10 nos 0.00

21 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00

Total Cost 0.00

Name of work - Estimate for repairing and servicing of 30 HP CF pump and motor of BORING ROAD DPS

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 30 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 30 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing 6310 M of SKF Make for DE, if required including all labour tools and tackles 1 nos. 0.00

5 Cost for supplying and fitting bearing 6210 ZZ of SKF Make for NDE, if required including all labour tools and tackles 1 nos. 0.00

6 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

7 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

8 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

9 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

10 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 1 no. 0.00

50 mm ID x 74 mm OD x 150 mm Length

11 Cost for supply and fitting of deep groove ball bearing no. SKF 6210 2RS1 or equivalent for 30 HP Electric pump with GST,CP & labour cess etc 2 nos 0.00

12 Cost for supply and fitting of thrust bearing no. SKF 51210 in DE or equivalent for 30 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

13 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

14 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

15 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

16 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

17 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

18 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

19 providing all labours, tools, tackles for installation of 30 HP motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

20 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 10 Kg 0.00

21 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 10 nos 0.00

22 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00

Total Cost 0.00

Name of work - Repairing of 50 FASD air break Starter cum control panel for operation of 40 HP motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 40 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete.

Selector switch 16 Amp 1 nos. 0.00

Bus-bar 400mm x 5mm thick 3 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Name of work - Repairing of 30 FASD air break Starter cum control panel for operation of 30 HP motor at BORING ROAD DPS

SI. Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 30 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

Selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 3 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

Total Cost - 0.00

Name of work - Estimate for opening, dismantling and repairing of 10 HP vacuum pump

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labour, tools and tackles at site for opening electrical connection of 10 HP vacuum pump motor, foundation bolts and nuts of pump, GI flange and taking out and removing it from base. 1 jobs. 0.00

2 Cost for dismantling of 10 HP vacuum pump for taking out impeller, pump shaft, etc and cleaning all the components for ready for repair. 1 jobs. 0.00

3 Cost for repairing of steel shaft by remetalling on cut point, turning and polishing of the shaft and making key way groove. 1 jobs. 0.00

5 Cost for making supplying and fitting GM bush as per sample. 1 nos. 0.00

6 Cost for supplying and fitting ball bearing if required.. 1 nos. 0.00

7 Cost for fitting materials such as packing paper, grease, gland packing, nuts and bolts, cotton waste etc required at the time of fitting of pump. 1 jobs. 0.00

8 Cost for reassembling of pump with shaft, impeller, bearing set, oil seal, etc accessories in work shop. 1 jobs. 0.00

9 Cost for providing all labour, tools and tackles for reinstallation of motor and pump on base and doing electrical connections and testing all complete. 1 jobs. 0.00

10 Cost for cutting and removing burnt cable sockets and doing cable socketing of 6 mm² 3 core copper cable of both motor and starter. 3 nos. 0.00

11 Cost for supplying and fitting of 3 core 6 mm2 copper cable from starter panel to 10 HP motor. 20 mtr 0.00

Name of work - Estimate for repairing and servicing of 38 HP (D) CF pump

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 38 HP CF pump from engine and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

4 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

5 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 1 no. 0.00

36 mm ID x 60 mm OD x 150 mm Length

6 Cost for supply and fitting of deep groove Roller bearing no. SKF for DE & NDE or equivalent for 38 HP diesel pump with GST,CP & labour cess etc 2 nos 0.00

7 Cost for supply and fitting of thrust Roller bearing no. SKF for DE or equivalent for 38 HP diesel pump with GST,CP & labour cess etc 1 nos 0.00

8 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

9 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

10 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

11 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

12 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

13 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

14 providing all labours, tools, tackles for installation of 38 HP motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

15 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 6 Kg 0.00

16 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 4 nos 0.00

17 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00

Name of Work : - Estimate for servicing of 38 HP diesel engine, its accessories

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 38 HP diesel engine of Kirloskar make by repairing of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc. all complete. 1 job. 0.00

2 Cost for supplying and fitting/filling following :-

Air filter 1 no. 0.00

Diesel filter 1 set 0.00

Lubricating oil filter 2 no. 0.00

mobile 3 lit 0.00

Set of hoises 1 set 0.00

Set of flexibles 1 set 0.00

Fuel off solenoid switch 12 v DC for fuel pump 1 no. 0.00

Relay in electrical panel 2 no. 0.00

Set of sealings 1 set 0.00

Rocker cover joints 2 no. 0.00

Coolant 3 ltr 0.00

3 Adjust/Replace(if necessary) V belt condition and tension, Thermostat element,valve clearance, fasteners, exhaust silencer. 1 job. 0.00

4 Radiator cleaning and repairing of radiator fines externally,radiator tube internally. 1 job. 0.00

5 Supply, installation and testing of new battery if required capacity to operate the engine and deducting cost of old battery as per direction of E/I. 1 job. 0.00

6 S/F battery cable and terminal etc as required. 2 no. 0.00

7 S/F battery terminal wire of length 2 mtr. etc as required. 2 no. 0.00

8 Complete overhauling and refitting of self starter by changing the bearing,carbon brush,bushes, nut bolt,washer etc as required during overhauling. with all required materials . 1 Job. 0.00

9 Repairing, overhauling and refitting of alternator with changing its burnt armature,carbon brush,bearings, bushes etc as required. 1 Job. 0.00

Name of work- Estimate for cleaning and desilting of sump approach channel, outlet channel etc.

Sl. No. Particulars Quantity Rate In Rs. (To be filled by the Bidder) Amount(Rs.)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Road Sweeper Analysis for desilting, Cost @ 550/day

Assume 1 sweeper required for 1 m3

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

complete cleaning of filled up sump in all lift and disposal of soil up to a lead of 50 mtr. as required and including all labour, tools & tackles

1 BORING DPS 8.89 m3 0.00

Cost for providing all labours, tools and tackles at site for repairing, removing rust,dust, scale, smokes etc. from old surface and painting two or more coats with anticorrosive bituminous paint of approved brand of two MS grating and channel. 1 job 0.00

Gr 8 (4) Name of Work- Annual repairing,overhauling,servicing ,operation & maintenance of all electromechanical equipments of Storm Drainage Pumping Station OFFICER'S FLAT DPS under Nutan Rajdhani Anchal, Works Division, BUIDCo, Patna for the monsoon year 2026-27 ( From 01st April 2026 to 31st March 2027 )

SI.No. Description Of Work Qty Unit Rate In Rs. (To be filled by the Bidder) Total Amount (RS.)

Rate In Figure Rate In Word

1 Pump Set-15 /20 HP C/F., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 4 job 0.00 0.00

2 Panel board and starter for 15/20 HP C/F Pump Set (As per Annexure - 01A) 4 job 0.00 0.00

3 PUMP-10 HP Vaccum pump,Running at 3 phage ,volt-440, f=50 HZ 1 job 0.00

4 Cleaning & Desilting of circular sump & intake in premises of the DPS (As per Annexure - 02) 1 job 0.00 0.00

5 Spray painting over double coat of paint with red oxide primer of all existing MS structure & all electromechanical equipments by removing old paint etc as required. 1 job 0.00

6 Cost for making and fitting of water level gauge etc as per required. 1 Job 0.00

7 Deployment of 01nos.x 02 shifts Road sweepars during period 1st April 2026 to 31st May 2026 , 01 nos. x03 shifts from 01.06.2026 to 15.10.2026 and 01 nos.x 02 shifts from 16.10.2026 to 31.03.2027 867 P/Staff 0.00

8 Deployment of 01 nos.x 3 shifts Highly Skilled Technician cum pump operators during period 1st April 2026 to 31st May 2026 , 02 nos. x 03 shifts from 01.06.2026 to 15.10.2026 and 01 nos.x 3 shifts from 16.10.2026 to 31.03.2027 1506 P/Staff 0.00

9 Maintenance of miscllaneous work of all Electro machanical equipment (electrical/mechanical/electronics) for the period of (01.04.2026 to 31.03.2027) at the DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing or supplying like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, transportation and loading, unloading of any equipment/material, repairing of civil structure during emergency for water draining , functionality of CCTV with recharge , Name plate of BUIDCO,Writing the name details of officers & pump operator, sweeper on the wall paint.,logbook and other required registers ,fire extingusher, availability of 24 hrs. x365 days in sufficient quantity of safety material, umbrella(02nos), torch,first aid kit box,rain coat,etc. as per Direction of E/I. Payment will be made only if work other than the above 08 items is done. 1 job (lumpsum) 0.00

Name of work - Estimate for repairing and servicing of 15 /20 HP CF pump and motor

Sl.No. Particulars QTY. Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 15/20 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation . 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 15/20 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing 6310 M of SKF Make for DE, if required including all labour tools and tackles 1 nos. 0.00

5 Cost for supplying and fitting bearing 6210 ZZ of SKF Make for NDE, if required including all labour tools and tackles 1 nos. 0.00

6 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

7 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

8 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. 1 job 0.00

9 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

10 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 1 no. 0.00

50 mm ID x 74 mm OD x 150 mm Length

11 Cost for supply and fitting of deep groove ball bearing no. SKF 6210 2RS1 or equivalent for 15/20 HP Electric pump with GST,CP & labour cess etc 2 nos 0.00

12 Cost for supply and fitting of thrust bearing no. SKF 51210 in DE or equivalent for 15/20 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

13 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

14 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

15 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

16 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

17 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

18 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

19 providing all labours, tools, tackles for installation of 15/20 HP motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

20 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 10 Kg 0.00

21 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 10 nos 0.00

22 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00

Name of work - Repairing of FASD air break Starter cum control panel for operation of 15/20 HP CF motor

SI.No. Particular Qty UNIT Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 15HP fully starter, panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-15/20)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Single phase preventer 1 no. 0.00

Annexture -02 (Desilting)

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Rate Analysis:-

Road Sweeper Cost @ 550/day (For 01 cum)

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

Officer's Flat DPS.

1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank, approach chhannel and inlet chamber etc of Officer's Flat DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site. (i) Circular sump of radious -2.0 m ,Height of Mud (Approx) - 1.22m ,volume of silt = 3.14 x 2.0 m x 2.0 mx 1.22 m =15.32 m³ P/m³ 15.32 0

Total mud= 15.32 m³

Gr 8 (5) Name Of Work :- Annual repair, operation & maintenance of Storm Drainage Pumping Station Dr. ZAKIR HUSSAIN INSTITUTE for the year2026 as session 2026-27.(01 April 2026 to 31 March 2027.)

SI.No. Description Of Work Qty Unit Rate In Rs. (To be filled by the Bidder) Total Amount (RS.)

Rate In Figure Rate In Word

1 Pump Set-15 HP C/F., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 2 job 0.00 0.00

2 Pump Set-20 HP C/F., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 02) 2 job 0.00 0.00

3 Panel board and starter for 2x15 HP C/F Pump Set (As per Annexure - 01A) 2 job 0.00 0.00

4 Panel board and starter for 20 HP C/F Pump Set (As per Annexure - 02A) 2 job 0.00 0.00

5 Pump Set-25 HP Sub.,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 03) 1 job 0.00 0.00

6 FASD Starter cum Panel Board for 25 HP sub.Pump Set ( As per Annexure - 03A ) 1 job 0.00 0.00

7 Cleaning & Desilting of circular sump & intake in premises of the DPS (As per Annexure - 04) 1 job 0.00 0.00

8 PUMP-10 HP Vaccum pump,Running at 3 phage ,volt-440, f=50 HZ 1 job 0.00

9 Complete the below Mention Misc. work as per instruction of Engineer - In - charge :- 1 job 0.00

A. Writing the name details of officers & Pump operator, Sweeper on the wall with paint.

B. Providing Log book & other Required registers/Misc.

C. Providing & Installation of Fire Extinguisher.

D. Providing & availablity of 24 hrs x 365 days in sufficient Qty. required Safety materials required as per Instruction of Engineer-in - charge.

10 Deployment of 1 no.x 2 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June 2026 to 15th Oct. 2026 and 1 no. x 1 shift from 01.04.2026 to 31.05.2026 & 16.10.2026 to 31.03.2027 502 shift 0.00

11 Deployment of 1 no. x 3 shifts man power (highly skilled labour) for the Operation of Pump & others during the monsoon period 01.04.2026 to 31.03.2027 1095 shift 0.00

12 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at storm drainage pumping plant Dr. Zakir hissain DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, Spray Painting of all existing MS structure,transportation and loading, unloading of any equipment, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge essential spare like as fuse wire, MCCB, gland packing, greese,mobil, bearing, coupling, coupling-bolt, nut-bolt of different size, AVF digital volt meter (96mm²) , and essential tools like wrinch, hammer, screw driver ,adjustable wrinch etc. as per Direction of E/I. 1 job (lumpsum) 0.00

TOTAL COST 0.00

(1) Name of work - Estimate for repairing and servicing of 15 HP CF pump and motor

Sl. Particulars QTY Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 15 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation . 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 15 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing 6310 M of SKF Make for DE, if required including all labour tools and tackles 1 nos. 0.00

5 Cost for supplying and fitting bearing 6210 ZZ of SKF Make for NDE, if required including all labour tools and tackles 1 nos. 0.00

6 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

7 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

8 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. 1 job 0.00

9 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

10 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 1 no. 0.00

50 mm ID x 74 mm OD x 150 mm Length

11 Cost for supply and fitting of deep groove ball bearing no. SKF 6210 2RS1 or equivalent for 30 HP Electric pump with GST,CP & labour cess etc 2 nos 0.00

12 Cost for supply and fitting of thrust bearing no. SKF 51210 in DE or equivalent for 30 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

13 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

14 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

15 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

16 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

17 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

18 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

19 providing all labours, tools, tackles for installation of 30 HP motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

20 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 10 Kg 0.00

21 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 10 nos 0.00

22 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00

(1) Name of work - Estimate for repairing and servicing of 20 HP CF pump and motor

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 20 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 20 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing N 313 ECP , if required including all labour tools and tackles 2 nos. 0.00

5 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

6 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

7 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

8 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

9 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 53mmIDx 77mmODx 150mm Length 1 no. 0.00

10 Cost for supply and fitting of deep groove ball bearing no. of equivalent no. for 20 HP Electric pump with GST,CP & labour cess etc 2 nos 0.00

11 Cost for supply and fitting of thrust bearing DE of equivalent no. for 20 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

12 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

13 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

14 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

15 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

16 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

17 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

18 providing all labours, tools, tackles for installation of 20 HP motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

19 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 10 Kg 0.00

20 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00

Name of work - Repairing of FASD air break Starter cum control panel for operation of 15 HP CF motor

SI. Particular Qty UNIT Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 15HP fully starter, panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

Selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Single phase preventer 1 no. 0.00

Name of work - Repairing of FASD air break Starter cum control panel for operation of 20 HP CF motor

SI. Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 20 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Selector switch 16 Amp 1 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

Name of work - Repairing of 25 HP sub. Motor

sl. No. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount (RS.)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 25 HP submersible pump set and taking out 25 sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00

2 Cost for opening and dismentling of 25 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00

3 cost for supplying and fitting bearing of SKF 3310 C3 and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

4 cost for supplying and fitting deep grooved single row bearing of SKF 6309 and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00

9 cost for supplying following :-

mobil 5 ltr 0.00

servo bearing grease 1.5 kg 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items. 1 job 0.00

11 Cost for labour, tools and tackles for making, supplying and fitting of shaft sleeve including turning, polishing, finishing etc, all complete job 1 job 0.00

12 Cost for assembly of all parts of 25 hp submersible pump at workshop including all labour tool and tackles 1 Job 0.00

13 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load including hire charges of pickup van and hydra/crane. 1 job 0.00

Name of work - Repairing of 25 FASD Starter cum panel for operation of 25 HP pump motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount (RS.)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 25 HP fully automatic star - delta air break starter with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor A type 40 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Over load relay unit having (37.0 - 50.0) Amp 1 no. 0.00

Push Button 2 nos. 0.00

Single phase preventer 1 no. 0.00

C.T Coil 150/5 rectangular magnet 1 no. 0.00

Selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 5 nos. 0.00

MCB 6A 4 nos. 0.00

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Rate Analysis:-

Road Sweeper Cost @ 550/day (For 01 cum)

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

Zakir Hussain DPS.

1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank, approach chhannel and inlet chamber etc of Zakir Hussain DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site. (i) Circular sump of radious -2.0 m ,Height of Mud (Approx) - 1.00 m ,volume of silt = 3.14 x 2.0 m x 2.0 mx 1.22 m =15.32 m³ P/m³ 15.32 0.00

Total mud= 15.32 m³

Gr 8 (6) Name of Work:- Estimate for complete Annual Repairing, overhauling, servicing, operation & maintenance of Drainage Pumping Plant 400 Set Rajbanshi Nagar, Patna for the session 2026-27. (1 st April 2026 to 31 March 2027 )

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Pump Set- 50 HP VT ,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 1 Job 0.00 0.00

2 Pump Set- 20 HP VT ,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 02) 1 Job 0.00 0.00

3 Pump Set-100 HP VT ,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 03) 2 Job 0.00 0.00

4 FASD Starter cum Panel Board for 50 HP VT Pump Set ( As per Annexure - 01A ) 1 Job 0.00 0.00

5 FASD Starter cum Panel Board for 20 HP VT Pump Set ( As per Annexure - 02A ) 1 Job 0.00 0.00

6 FASD Starter cum Panel Board for 100 HP VT Pump Set ( As per Annexure - 03A ) 2 Job 0.00 0.00

7 Existing Outdoor Transformer 150 KVA (AS Per Annexture -04) 1 Job 0.00 0.00

8 Existing Outdoor Transformer 315 KVA (AS Per Annexture -05) 1 Job 0.00 0.00

9 Complete repairing and servicing of Diesel Engine- 156 HP pump set (As Per Annexure -06). 1 Job 0.00 0.00

12 Complete repairing and overhauling of Diesel Engine- 156 HP pump set (As Per Annexure -07). 1 Job 0.00 0.00

11 Pump Set-30 HP Sub.,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 08) 1 job 0.00 0.00

12 FASD Starter for 30 HP submersible Pump Set. ( As per Annexure - 08A ) 1 job 0.00 0.00

13 Providing & installation of New water level Gauge 1 Job 0.00

14 Spray painting over Double coat of paint with red oxide primer of all Existing MS Structure & all Electromechanical equipments by removing old paints. 1 Job 0.00

15 Cleaning & Desilting of Existing sump at DPS by removing mud approx 1.2 m in depth .(AS Per Annexture -09) 1 Job 0.00 0.00

16 Deployment of 02 nos.x3 shifts Road sweepars for cleaning & Screening at DPS during monsoon period 1st June 2026 to15th Oct 2026 and 01 nos. x 02 shift for the period 16.10.2026 to 31/03/2027 & 01.04.2026 to 31.05.2026. 1278 Shift 0.00

17 Deployment of 02 nos.x3 shifts Highly Skilled Technician cum pump operators during period 1st June 15th Oct 2026 and 01 nos. x 03 shift for the period 16.10.2026 to 31/03/2027 & 01.04.2026 to 31.05.2026. 1506 Shift 0.00

18 Complete the below Mention work/ Services of Misc. Work as per instruction of E/I :-

A Writing the name details of officers & Pump operator, Sweeper on the wall with paint. 1 Job 0.00

B Providing Log book & other Required registers/Misc. 1 Set 0.00

C Providing & Installation of Sufficient Qty. Of Fire Extinguisher as per Requirement. 1 Set 0.00

D Providing & availablity of 24 hrsx365 days in sufficient Qty, required Safety materials as per Instruction of E/I. 1 Job 0.00

19 Cost for Complete Repairing,Servicing of Drinking water tube well cum motor & its Pipe line 1 Job 0.00

20 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at storm drainage pumping plant 400 Set Rajbanshi Nagar DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, Spray Painting of all existing MS structure,transportation and loading, unloading of any equipment, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge essential spare like as fuse wire, MCCB, gland packing, greese,mobil, bearing, coupling, coupling-bolt, nut-bolt of different size, AVF digital volt meter (96mm²) , and essential tools like wrinch, hammer, screw driver ,adjustable wrinch etc. as per Direction of E/I. 1 Job 0.00

Name Of Work :- Repairing and servicing of 50 HP VT motor and pump

sl.no. Description of work Qty unit Rate In Rs. (To be filled by the Bidder) Total Amount (Rs.)

Rate In Figure Rate In Word

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of motor and pump and all electrical connection of motor, taking down motor from from its base by top lifting of motor from motor stool and stacking the motor at proper place 1 job 0.00

2 Cost for providing labour, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc. of pump. 1 job 0.00

3 Cost for transportation of pump accessories and motor from DPS to work shop and workshop to DPS including hydra and transport vehicle etc. with loading and unloading 1 job 0.00

4 Cost for complete opening of motor part by part & taken out of top & bottom bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size. 1 job 0.00

5 S/F of DE and NDE bearings of appropriate size 2 no. 0.00

6 Cost for greasing the bearing of motor and varnishing, heating & taping of enamelled copper winding wire including required materials like grease and varnish-6 lit. etc. 1 job 0.00

7 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place etc. 1 job 0.00

8 Cost for opening and dismentling of bowl assembly of 50 HPVT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. 1 job 0.00

9 Cost for checking pump shaft, head shaft & line shaft on lathe for straightness and strenghtening the same on hydraulic press machine. 3 nos. 0.00

10 Remetaling and rethreading at both ends upto 3" length on top and line shaft. 3 no. 0.00

11 Cost of making, supply and fitting line shaft bronze bush of size 2 nos. 0.00

58mm ID 78mm OD 125mm length

12 Cost for making and supplying stuffing box bronze bush of size 1 nos. 0.00

58mm ID 78mm OD 100mm length

13 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size 2 nos. 0.00

55mm ID 80 OD 145mm Length

14 Cost of making, supply and fitting bell mouth bronze bush of size 1 nos. 0.00

60mm ID 80mm OD 150mm length

15 Cost for supply and fitting of SS 416 shaft sleeve of size 1 job 0.00

58mm ID 78mm OD 150mm length

16 Cost for making and supplying lantern ring of size 1 job 0.00

17 Cost for supplying and fitting following:-

(i) 'o' rings 3 nos. 0.00

(ii) Stuffing box packing 3 kg 0.00

(iii) Key for shaft sleeve 1 no. 0.00

(iv) Key for pump shaft. 1 no. 0.00

(v) Rubber coupling bush 6 no. 0.00

(vi) steel coupling bolts 6 no. 0.00

(vii) Ratchet pin SS 410 8 no. 0.00

18 Cost for repairing of rachet plate by doing CI welding, grinding & finishing and making 12 nos, sharp edge of proper size and sample by grinding machine 1 job 0.00

19 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

20 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc. in bowl housing in the work shop 1 job 0.00

21 Cost for scrathing old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black japan paint. 1 job 0.00

22 Cost for supplying and fitting SS bolts & nuts with plane and spring washers for discharge header and column pipe. 55 nos. 0.00

23 Cost for supplying and fitting SS bolts & nuts with plane and spring washers for bowl mouth assembly. 72 nos. 0.00

24 Cost for supply of steel bolts with threading on both ends complete with washer and nuts as per size & sample 8 nos. 0.00

25 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) 20 kg 0.00

27 Cost for fitting materials such as cotton waste, grease, gland packing, emery paper, petrol etc required at the time of fitting of pump. 1 job 0.00

28 Cost for supplying and filling mobile lubricant 15 ltr 0.00

29 Cost for fitting of pump accessories and lowering such as ccolumn pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. 1 job 0.00

30 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing on full load. 1 job 0.00

31 Deduct : Cost of scrap materials Bronze -5 kg 0.00

32 Deduct : Cost of scrap materials Stainless steel -4 kg 0.00

Name Of Work :- Repairing and servicing of 20 HP VT motor and pump

sl.no. Description of work Qty unit Rate In Rs. (To be filled by the Bidder) Amount (Rs.)

Rate In Figure Rate In Word

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 20 HP VT motor and pump and all electrical connection of motor, taking down motor from from its base by top lifting of motor from motor stool and stacking the motor at proper place 1 job 0.00

2 Cost for providing labour, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc. of 20 HP VT pump. 1 job 0.00

3 Cost for transportation of pump accessories and motor from DPS to work shop and workshop to DPS including hydra and transport vehicle etc. with loading and unloading 1 job 0.00

4 Cost for complete opening of 20 HP motor part by part & taken out of top & bottom bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size. 1 job 0.00

5 S/F of DE and NDE bearings of appropriate size 2 no. 0.00

6 Cost for greasing the bearing of motor and varnishing, heating & taping of enamelled copper winding wire including required materials like grease and varnish-6 lit. etc. 1 job 0.00

7 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place etc. 1 job 0.00

8 Cost for opening and dismentling of bowl assembly of 20 HPVT pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. 1 job 0.00

9 Cost for checking pump shaft, head shaft & line shaft on lathe for straightness and strenghtening the same on hydraulic press machine. 3 nos. 0.00

10 Remetaling and rethreading at both ends upto 3" length on top and line shaft. 3 no. 0.00

11 Cost of making, supply and fitting line shaft bronze bush of size 2 nos. 0.00

58mm ID 78mm OD 125mm length

12 Cost for making and supplying stuffing box bronze bush of size 1 nos. 0.00

58mm ID 78mm OD 100mm length

13 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size 2 nos. 0.00

55mm ID 80 OD 145mm Length

14 Cost of making, supply and fitting bell mouth bronze bush of size 1 nos. 0.00

60mm ID 80mm OD 150mm length

15 Cost for supply and fitting of SS 416 shaft sleeve of size 1 job 0.00

58mm ID 78mm OD 150mm length

16 Cost for making and supplying lantern ring of size 1 job 0.00

17 Cost for supplying and fitting following:-

(i) 'o' rings 3 nos. 0.00

(ii) Stuffing box packing 3 kg 0.00

(iii) Key for shaft sleeve 1 no. 0.00

(iv) Key for pump shaft. 1 no. 0.00

(v) Rubber coupling bush 6 no. 0.00

(vi) steel coupling bolts 6 no. 0.00

(vii) Ratchet pin SS 410 8 no. 0.00

18 Cost for repairing of rachet plate by doing CI welding, grinding & finishing and making 12 nos, sharp edge of proper size and sample by grinding machine 1 job 0.00

19 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

20 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc. in bowl housing in the work shop 1 job 0.00

21 Cost for scrathing old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black japan paint. 1 job 0.00

22 Cost for supplying and fitting SS bolts & nuts with plane and spring washers for discharge header and column pipe. 55 nos. 0.00

23 Cost for supplying and fitting SS bolts & nuts with plane and spring washers for bowl mouth assembly. 72 nos. 0.00

24 Cost for supply of TVS make steel bolts with threading on both ends complete with washer and nuts as per size & sample 8 nos. 0.00

25 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) 20 kg 0.00

27 Cost for fitting materials such as cotton waste, grease, gland packing, emery paper, petrol etc required at the time of fitting of pump. 1 job 0.00

28 Cost for supplying and filling mobile lubricant 15 ltr 0.00

29 Cost for fitting of pump accessories and lowering such as ccolumn pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. 1 job 0.00

30 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing on full load. 1 job 0.00

31 Deduct : Cost of scrap materials Bronze -5 kg 0.00

32 Deduct : Cost of scrap materials Stainless steel -4 kg 0.00

Name Of Work :- Repairing and servicing of 100 HP VT motor and pump

s.n. Description of work Qty Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs.)

Rate In Figure Rate In Word

1 Cost for providing labour, tools and tackles at site for opening all coupling bolts of 100 HP VT motor and pump and all electrical connection of motor, taking down motor from from its base by top lifting of motor from motor stool and stacking the motor at proper place 1 job 0.00

2 Cost for providing labour, tools and tackles at site for opening and taking out discharge tee, column pipe, bowl mouth assembly, etc. of 100 HP VT pump. 1 job 0.00

3 Cost for transportation of pump accessories and motor from DPS to work shop and workshop to DPS including hydra and transport vehicle etc. with loading and unloading 1 job 0.00

4 Cost for complete opening of 100 HP motor part by part & taken out of top & bottom bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size. 1 job 0.00

5 S/F of DE and NDE SKF make bearings of appropriate size 2 no. 0.00

6 Cost for greasing the bearing of motor and varnishing, heating & taping of enamelled copper winding wire including required materials like grease and varnish-6 lit. etc. 1 job 0.00

7 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place etc. 1 job 0.00

8 Cost for opening and dismentling of bowl assembly of pump, taking out pump shaft, upper & lower bowl mouth, impeller, upper and lower bushes, etc in workshop. 1 job 0.00

9 Cost for checking pump shaft, head shaft & line shaft on lathe for straightness and strenghtening the same on hydraulic press machine. 3 nos. 0.00

10 Remetaling and rethreading at both ends upto 3" length on top and line shaft. 3 no. 0.00

11 Cost of making, supply and fitting line shaft bronze bush of size 2 nos. 0.00

58mm ID 78mm OD 125mm length

12 Cost for making and supplying stuffing box bronze bush of size 1 nos. 0.00

58mm ID 78mm OD 100mm length

13 Cost for making and fitting of SS 416 shaft coupling by cutting and making internal thread of size 2 nos. 0.00

55mm ID 80 OD 145mm Length

14 Cost of making, supply and fitting bell mouth bronze bush of size 1 nos. 0.00

60mm ID 80mm OD 150mm length

15 Cost for supply and fitting of SS 416 shaft sleeve of size 1 job 0.00

58mm ID 78mm OD 150mm length

16 Cost for making and supplying lantern ring of size 1 job 0.00

17 Cost for supplying and fitting following:-

(iii) Key for shaft sleeve 1 no. 0.00

(iv) Key for pump shaft. 1 no. 0.00

(v) Rubber coupling bush 6 no. 0.00

(vi) steel coupling bolts 6 no. 0.00

(vii) Ratchet pin SS 410 8 no. 0.00

18 Cost for repairing of rachet plate by doing CI welding, grinding & finishing and making 12 nos, sharp edge of proper size and sample by grinding machine 1 job 0.00

19 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

20 Cost for reassembling of pump accessories such as bowl mouth bush, impeller, pump shaft, etc. in bowl housing in the work shop 1 job 0.00

21 Cost for scrathing old paint of column pipe and discharge pipe and doing one coat primer with red oxide and painting two coats with black japan paint. 1 job 0.00

22 Cost for supplying and fitting SS bolts & nuts with plane and spring washers for discharge header , column pipe and bowl mouth assembly 127 nos. 0.00

24 Cost for supply of steel bolts with threading on both ends complete with washer and nuts as per size & sample 8 nos. 0.00

25 Cost for supplying and fitting rubber insertion sheet of size 1/8" thick (black) 20 kg 0.00

27 Cost for fitting materials such as cotton waste, grease, gland packing, emery paper, petrol etc required at the time of fitting of pump. 1 job 0.00

28 Cost for supplying and filling mobile lubricant 15 ltr 0.00

29 Cost for fitting of pump accessories and lowering such as ccolumn pipe, bowl mouth assembly, discharge tee line shaft, all spider bushes, etc into the sump. 1 job 0.00

30 Cost for placing of motor on its base, doing coupling of motor & pump, doing all electric connection of motor and testing on full load. 1 job 0.00

31 Deduct : Cost of scrap materials Bronze -5 kg 0.00

32 Deduct : Cost of scrap materials Stainless steel -4 kg 0.00

Name of work - Repairing of 50 HP Starter cum control panel for operation of 50 HP motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 50 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete.

Selector switch 16 Amp 1 nos. 0.00

Bus-bar 400mm x 5mm thick 3 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Three pole MCCB 150 A 1 no. 0.00

Name of work - Repairing of 20HP Starter cum control panel for operation of 20 HP motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 20 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete.

Selector switch 16 Amp 1 nos. 0.00

Bus-bar 400mm x 5mm thick 3 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Three pole MCCB 100 A 1 no. 0.00

Name of work - Repairing of 100 HP FASD air break Starter cum control panel for operation of 100 HP motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 100 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting, contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor MNX 140 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (84.6 - 135) Amp 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 3 nos. 0.00

Single phase preventer 1 no. 0.00

MCCB 250 A 36KA 1 no. 0.00

Multifunction LED meter CI 0.5s 1 no. 0.00

Selector switch 16 Amp 2 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Name of work - Estimate for repairing of transformer of 150 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount (RS.)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 150 KVAtransformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 80 ltrs. 0.00

6 cost for transformer oil filtration 100 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper -4 kg 0.00

Name of work - Estimate for repairing of transformer of 315 KVA transformer and servicing, cleaning, greasing, repairing of AB switch & DP structure of 11 KV electric sub - station

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 315 KVA transformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 100 ltrs. 0.00

6 cost for transformer oil filtration 320 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper -4 kg 0.00

Name of work - Estimate for Repairing & servicing of 156HP diesel engine and its accessories of storm drainage pumping plant Pahari Old before monsoon, 2023 for the year 2023-24

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools, tackles and an experienced mechanic at site for servicing of 156 HP diesel engine of Greaves make by checking of fuel pump, oil pump, decarbonisation of engine cylinder head and testing of engine on unload and load, etc. all complete. 1 P/Job 0.00

2 Cost for supplying and fitting following with 18% GST, 10% CP & 1% labour cess :-

(i) Air filter 1 Each 0.00

(ii) Diesel filter set 1 P/Set 0.00

(iii) Lubcicating oil filter 2 Each 0.00

(iv) Set of Hoses 1 P/set 0.00

(v) Fuel Flexible pipe 1 P/Set 0.00

(VI)Fuse 24V assly 1 P/set 0.00

(vii) Gear oil for gear box 20 Ltr container 1 P/Cane 0.00

(viii) Coolant 5 ltr cane 1 P/Cane 0.00

(ix) V Belt 3 Each 0.00

(x) Relay in electrical power 2 Each 0.00

(xi) Solenoid 24v 1 Each 0.00

(xii) Head Gasket 1 Each 0.00

(xiii) Set of joint 1 Each 0.00

(xiv) Set of sealing rings 1 Each 0.00

(xv) Set of Hose clip 1 Each 0.00

(xvi) Magnetic pick up 1 Each 0.00

(xvii) Battery Terminal 4 Each 0.00

3 Cost repairing of electrical panel of diesel engine by replacing all burnt and damaged electrical wires and fuses and checking the electrical panel including the cost of labour and electricians. With GST, CP,& Labour cess 1 P/job 0.00

4 Cost for repairing of self starter by replacing all carbon brush, GM bush, bearings, solenoid etc. by experienced mechanic in workshop including the cost of materials.With GST, CP,& Labour cess 1 P/job 0.00

5 Cost for repairing of alternator by dismantaling, petrol washing the entire components, changing of all damaged spares, carbon brushes, bearing and cooling fan etc. as required during repairing.With GST, CP,& Labour cess 1 P/Job 0.00

6 Cost for repairing of rediator by checking the leakages from copper tubes, repairing & soldering by gas welding machine, changing the rotten out copper tubes with providing copper fins, repair of the raditor holding frame , rubber pad and painting of the same. 1 P/Job 0.00

7 Cost for repairing the leakages in exhaust system by dismantling the exhaust manifolds and providing the gasket set and bolts and testing on load. 1 P/Job 0.00

8 Cost for dismantaling the power btakew off system, providing and fitting of cluch set with pressure plate and testing on load at site. 1 P/Job 0.00

(1) Name of work - Estimate for repairing and overhauling of 156 HP CF pump

Sl. Particulars Unit Qty. Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 156 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing and from foundation base. p/job 1 0.00

2 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. p/job 1 0.00

3 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. p/job 1 0.00

4 Cost for making,supply and fitting of bronze bush including cutting, turning, polishing and finishing of size. each 1 0.00

100 mm ID x 122 mm OD x 200 mm length

5 Cost for supply and fitting of S-cylindrical Roller bearing no. SKF 3322 of equivalent for 105 HP Electric pump with GST,CP & labour cess etc each 2 0.00

6 Cost for supply and fitting of Spherical Roller bearing no. SKF 3322 of equivalent for 105 HP Electric pump with GST,CP & labour cess etc each 1 0.00

7 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. p/job 1 0.00

8 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. p/set 1 0.00

9 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. p/job 1 0.00

10 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. p/set 1 0.00

11 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. P/job. 1 0.00

12 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. P/job. 1 0.00

13 providing all labours, tools, tackles for installation of 105 HP C/F pump on foundation,refitting nut-bolt & testing on unload at DPS. P/job. 1 0.00

14 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. P/Kg 10 0.00

15 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackle TVS make. each 10 0.00

16 Deduct : Cost of Scrap materials of bronze P/Kg -2 0.00

(1) Name of work - Estimate for repairing and servicing of 30 HP sub pump and motor

Sl. No. Particulars Qty unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 30 HP submersible pump set and taking out 50 sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00

2 Cost for opening and dismentling of 30 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00

3 cost for supplying and fitting 3310 C3 bearingand providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

4 cost for supplying and fitting deep grooved single row bearing of appropriate no. 6309 making of SKF and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00

9 cost for supplying following :-

mobil 5 ltr 0.00

servo bearing grease 1.5 kg 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

11 Cost for labours, tools and tackles for making, supplying and fitting of shaft sleeve including turning, polishing etc all completed job 1 Job 0.00

12 Cost for assembly of all parts of 30 hp submersible pump at workshop including all labour tool and tackles. 1 Job 0.00

13 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 1 job 0.00

Name of work - Repairing of FASD Starter cum control panel for operation of 30 HP Submersible motor.

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 50 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 40 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

C.T Coil 100/5 1 nos. 0.00

Single phase preventer 1 no. 0.00

Selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 5 nos. 0.00

MCCB 6A 4 no. 0.00

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Rate Analysis:-

Road Sweeper Cost @ 550/day (For 01 cum)

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

400 Set Rajbanshi Nagar DPS.

1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank, approach chhannel and inlet chamber etc of 400 Set Rajbanshi Nagar DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site. (i) Circular sump of radious -4.15m ,Height of Mud (Approx) - 1.20 m =3.14x4.15x4.15x1.2 - 64.89M³ P/M³ 65.3 0.00

(ii) inlet of sump - 5'x 5' x 0.5' (avg.) = 12.5 cft=0.4M³

Total mud= 65.29M³

Gr 8 (7) Name of Work:- Estimate for complete Annual Repairing, overhauling, servicing, operation & maintenance of Sewarage pumping Plant 800 set Shastrinagar under Mech. Work division , Patna for the session 2026-27 (1 st April 2026 to 31 March 2027 )

Sl. No. Particulars of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Pump Set-30HP Sub., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 2 job 0.00 0.00

2 Repairing of soft starter cum Panel Board for 30 HP SUB motor pump (As per Annexure-01A) 2 job 0.00 0.00

3 Existing Outdoor Transformer100 KVA with AB Switches (As per Annexure- 02 ) 1 job 0.00 0.00

4 Complete the below Mention work/ Services of Misc. Work as per instruction of E/I :-

Writing the name details of officers & Pump operator, Sweeper on the wall with paint. 1 Job 0.00

Providing Log book & other Required registers/Misc. 1 Set 0.00

Providing & Installation of Sufficient Qty. Of Fire Extinguisher as per Requirement. 1 Set 0.00

Providing & availablity of 24 hrs x 365 days in sufficient Qty, required Safety materials as per Instruction of E/I. 1 Job 0.00

Providing & installation of water level Gauge as per direction of Engineer-in-charge (If required) 1 job 0.00

5 Cost for the proper cleaning & desilting of Existing circular sump & its Intake channel complete job as per direction of E/I.(As per Annexure- 03 ) 1 job 0.00 0.00

6 Cost for the deployment of Highly Skilled Pump operators 01 nos.x 03 shift per day from 01.04.2026 to 31.03.2027 (1095 shift ) 1095 shift 0.00

7 Deployment of 01 no.x3 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June to 15th Oct. 2026 and 1 no. x 1 shift from16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 (639 shift) 639 shift 0.00

8 Maintenance of miscllaneous work of all Electro machineries for the period of (01.03.2026 to 31.03.2027) at storm drainage pumping plant 800 set shastrinagar DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, Spray Painting of all existing MS structure,transportation and loading, unloading of any equipment, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge essential spare like as fuse wire, MCCB, gland packing, greese,mobil, bearing, coupling, coupling-bolt, nut-bolt of different size, AVF digital volt meter (96mm²) , and essential tools like wrinch, hammer, screw driver ,adjustable wrinch etc. as per Direction of E/I. 1 job 0.00

Total Rs. :- SAY Rs. 0.00

Name of work - Repairing of 30 HP sub. Motor of DPS for the monsoon 2026 for the year 2026-27

Sl.no Particulars unit Qty. Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 30 HP submersible pump set and taking out 30hp sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane p/job 1 0.00

2 Cost for opening and dismentling of 30 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. p/job 1 0.00

3 cost for supplying and fitting double row angular contact bearing of appropriate no. making of SK and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. each 1 0.00

4 cost for supplying and fitting deep grooved single row bearing of appropriate no. making of SKF and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. each 1 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours p/job 1 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit each 2 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles each 1 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. p/set 1 0.00

9 cost for supplying following :-

mobil p/ltr 5 0.00

servo bearing grease p/kg 1.5 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. p/set 1 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. p/job 1 0.00

11 Cost of labour, tools, and tackles for making supplying and fitting of shaft sleev including turning, polishing, finishing etc all complete job. p/job 1 0.00

12 Cost for assembly of all parts of 50 hp submersible pump at workshop including all labour tool and tackles. p/job 1 0.00

13 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. p/job 1 0.00

Name of work - Repairing of 30 HP Starter cum control panel for operation of30 HP sub motor at DPS before monsoon 2026 for the year 2026-27.

SI.No Particular Unit Qty Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 30 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 40 amp A type each 1 0.00

Timer (0-30)sec each 1 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting each 1 0.00

Push Button each 2 0.00

C.T Coil 100/5 each 1 0.00

Single phase preventer each 1 0.00

Selector switch 16 Amp each 1 0.00

Phase indicating lamp each 5 0.00

MCCB 6A each 4 0.00

Name of work - Estimate for repairing of 100 KVA transformer

Sl. No Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount (RS.)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening and dismantling all electrical connections of HT and LT of 100 KVAtransformer, loading and unloading the transformer on transportation vehicle by using hydraulic crane including the hire cost and reinstallation, commissioning after repairing at DPS 1 jobs. 0.00

2 Cost for opening the top cover and dismentling the same for taking out HT and LT coils from transformer body after draining out transformer oil and stacking in a container, taking out sludge of transformer oil and cleaning inside of transformer body and radiator fins by blowing pressurised oil. 1 jobs. 0.00

3 Cost for providing all labours and tools and taking out HT and LT coil from transformer body by using chain pulley block 1 jobs. 0.00

4 Cost for supplying and fitting following :-

(i) LT stud of copper 2 nos. 0.00

(ii) LT bush 2 nos. 0.00

(iii) HT stud of copper 2 nos. 0.00

(iv) HT bush 2 nos. 0.00

(v) Rubberized gasket 1 nos. 0.00

5 Cost for supplying and filling of tranformer oil. 80 ltrs. 0.00

6 cost for transformer oil filtration 100 ltrs. 0.00

7 Cost for cutting and removing old and damaged cable socket of LT cable of transformer and doing cable socketing including the cost of 185 mm² cable socket and all requisite insulating materials such as glass tape, PVC tape, empire Tape, etc. 2 nos. 0.00

8 Cost for tightening of HT & LT studs after refilling of transformer oil and fitting of top cover with ruberised gasket and re-installing equalizing pipes, etc all complete work. 1 jobs. 0.00

9 Cost for providing all labours, tools and tackles at site for opening and dismantling of 400 Amp. AB switch such as male & female contact, knife type contact, cleaning & washing each component with petrol properly and resetting them all complete job. 1 jobs. 0.00

10 Cost for supplying & fitting following spares. :-

Post insulator. 2 Pcs 0.00

Horn gap fuse. ( 1 pcs = 3 nos.) 2 Pcs 0.00

Net fuse for 400 Amp. AB switch. (1 pcs =3 nos.) 2 Pcs 0.00

Copper wire 6 SWG. 2 kg 0.00

GI bolts & nuts with washer of different sizes 1.5 kg 0.00

Rabit conductor for connection of main ncoming feeder. 5 M 0.00

Fuse wire 19 no. 0.5 Kg 0.00

11 Cost for PVC sleeving suitable to withstand 11 KV power supply for sleeving of 6 SWG jumpher wire 5 Mtr. 0.00

12 Deduct : Cost of Scrap materials Copper -4 kg 0.00

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

BCD SOR 2.24.1 Rate Analysis:-

Road Sweeper Cost @ 550/day (For 01 cum)

In or under water and/or liquid mud, including pumping out water as required and etra due to slow progress and dewatering 20% of the rate of item

Cost = 550 X 1.2 = 660/day

Labour Cess @ 1% = 8.95

Grand total = 904.57

800 Set Shastri Nagar DPS.

1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank, approach chhannel and inlet chamber etc of 800 Set Shastri Nagar DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site. (i) Circular sump of radious -7.5' = 2.3m ,Height of Mud (Approx) - 1.00 m, volume of Mud=3.14 x2.3x 2.3 x 1.00 =16.61M³ P/M³ 17.03 0.00

(ii) Silt in inlet of sump - 6'x 5' x 0.5' (avg.) = 15cft=0.42M³

Total mud=17.03M³

SAY TOTAL Rs. 0.00

Gr 8 (8) Name Of Work :- Annual repair, operation & maintenance of Storm Drainage Pumping Station 80 SET RAJBANSHINAGAR for the years as session 2026-27 ( 1 April 2026 to 31 March 2027)

SI.No. Description Of Work Qty UNIT Rate In Rs. (To be filled by the Bidder) Amount (RS.)

Rate In Figure Rate In Word

1 Pump Set-15 HP C F., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 2 job 0.00 0.00

2 Panel board and starter for 2x15 HP C/F pump and moror (As per Annexure - 01A) 2 job 0.00 0.00

3 Pump Set-25 HP Sub.,Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 02) 2 job 0.00 0.00

4 FASD starter for 25 HP submersible motor pump. ( As per Annexure - 02A ) 1 job 0.00 0.00

5 Cleaning & Desilting of circular sump & intake in premises of stor drainage pumping plant ( As per Annexure - 03 ) 1 job 0.00 0.00

6 PUMP-10 HP Vaccum pump,Running at 3Ø ,f=50 Hz volt=440 V for CF Pump 2 job 0.00

7 Complete the below Mention Misc. work as per instruction of Engineer - In - charge :- 1 job 0.00

A. Providing & Instalation of name plate of Buidco.

B. Writing the name details of officers & Pump operator, Sweeper on the wall with paint.

C. Providing Log book & other Required registers/Misc.

D Providing & Installation of Fire Extinguisher.

E Providing & availablity of 24 hrs x 365 days in sufficient Qty. required Safety materials required as per Instruction of Engineer-in - charge.

8 Cost for providing & installation of water level gauge 1 job 0.00

9 Deployment of 1 no.x3 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June 2026 to 15th Oct. 2026 and 1 no. x 2 shift from 01.04.2026 to 31.05.2026 & 16.10.206 to 31.03.2027. 867 shift 0.00

10 Deployment of 1 no. x 3 shifts man power (highly skilled labour) for the Operation of Pump & others during the monsoon period 1st April 2026 to 31 st March 2027. 1095 shift 0.00

11 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at storm drainage pumping plant80 Set Rajbanshi Nagar DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, Spray Painting of all existing MS structure,transportation and loading, unloading of any equipment, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge essential spare like as fuse wire, MCCB, gland packing, greese,mobil, bearing, coupling, coupling-bolt, nut-bolt of different size, AVF digital volt meter (96mm²) , and essential tools like wrinch, hammer, screw driver ,adjustable wrinch etc. as per Direction of E/I. 1 job (lumpsum) 0.00

(1) Name of work - Estimate for repairing and servicing of 15 HP CF pump and motor

Sl. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 15 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation base. 1 job 0.00

2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00

3 Cost for complete opening of 15 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00

4 Cost for supplying and fitting bearing 6310 M of SKF Make for DE, if required including all labour tools and tackles 1 nos. 0.00

5 Cost for supplying and fitting bearing 6210 ZZ of SKF Make for NDE, if required including all labour tools and tackles 1 nos. 0.00

6 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00

7 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00

8 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. at workshop. 1 job 0.00

9 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00

10 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 50mm IDx74mmODX150mm Length 1 no. 0.00

11 Cost for supply and fitting of deep groove ball bearing no. SKF 6210 2RS1 or equivalent for15 HP Electric pump with GST,CP & labour cess etc 2 nos 0.00

12 Cost for supply and fitting of thrust bearing no. SKF 51210 in DE or equivalent for 15 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00

13 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00

14 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00

15 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00

16 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00

17 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00

18 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00

19 providing all labours, tools, tackles for installation of 15 HP motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00

20 Cost for supplying and fitting bolts and nuts of different sizes with washer labours, tools & tackles TVS make. 10 Kg 0.00

21 Cost for supplying, making and fitting SS bolt for coupling as per size and sample labours, tools & tackles. 10 nos 0.00

22 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00

Name of work - Repairing of 15 HP Starter cum control panel for operation of 15 HP motor

SI. Particular Qty UNIT Rate In Rs. (To be filled by the Bidder) Amount(RS)

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 15HP fully starter, panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor 65 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00

Push Button 2 nos. 0.00

Selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 3 nos. 0.00

Single phase preventer 1 no. 0.00

Name of work - Repairing of 25 HP sub. Motor

sl. No. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Cost for providing all labours, tools and tackles at site for dissconnecting the 25 HP submersible pump set and taking out 25 sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00

2 Cost for opening and dismentling of 25 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00

3 cost for supplying and fitting bearing of SKF 3310 C3 and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

4 cost for supplying and fitting deep grooved single row bearing of SKF 6309 and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00

5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00

6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00

7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00

8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00

9 cost for supplying following :-

mobil 5 ltr 0.00

servo bearing grease 1.5 kg 0.00

nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00

10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items. 1 job 0.00

11 Cost for labour, tools and tackles for making, supplying and fitting of shaft sleeve including turning, polishing, finishing etc, all complete job 1 job 0.00

12 Cost for assembly of all parts of 25 hp submersible pump at workshop including all labour tool and tackles 1 Job 0.00

13 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load including hire charges of pickup van and hydra/crane. 1 job 0.00

Name of work - Repairing of 25 FASD Starter cum panel for operation of 25 HP pump motor

SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount

Rate In Figure Rate In Word

1 Providing all Labours,tool & tackles for repairing of 25 HP fully automatic star - delta air break starter with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.

Contactor A type 40 amp 1 no. 0.00

Timer (0-30)sec 1 no. 0.00

Over load relay unit having (37.0 - 50.0) Amp 1 no. 0.00

Push Button 2 nos. 0.00

Single phase preventer 1 no. 0.00

C.T Coil 150/5 rectangular magnet 1 no. 0.00

Selector switch 16 Amp 1 nos. 0.00

Phase indicating lamp 5 nos. 0.00

MCB 6A 4 nos. 0.00

Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)

Rate In Figure Rate In Word

1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank, approach chhannel and inlet chamber etc of 80 Set Rajbanshi Nagar DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site. (i) Circular sump of radious -7.5' ,Height of Mud (Approx) - 3' =3.14 x 7.5' x 7.5'x 4' =706.5cft =20.00 m³ P/m³ 20.51 0.00

(ii) Silt in inlet of sump - 6'x 6' x 0.5' (avg.) = 18cft=0.51m³

Total mud= 20.51m³

Sl. No. Abstract Amount

1 Estimate for the work of Annual Repairing, maintenance & operation of electro-mechanical accessorries of the pump sets installed in storm drainage pumping plant at Punaichak monsoon 2026 for the Year 2026-27. 0.00

2 Estimate For Annual repair, operation & maintenance of Storm Drainage Pumping Station SK PURI DPS for the year 2026-27. 0.00

3 Estimate For Annual repair, operation & maintenance of Storm Drainage Pumping Station BORING ROAD DPS for the year 2026-27 0.00

4 Annual repairing,overhauling,servicing ,operation & maintenance of all electromechanical equipments of Storm Drainage Pumping Station OFFICER'S FLAT DPS under Nutan Rajdhani Anchal, Works Division, BUIDCo, Patna for the monsoon year 2026-27 ( From 01st April 2026 to 31st March 2027 ) 0.00

5 Annual repair, operation & maintenance of Storm Drainage Pumping Station Dr. ZAKIR HUSSAIN INSTITUTE for the year2026 as session 2026-27.(01 April 2026 to 31 March 2027.) 0.00

6 Estimate for complete Annual Repairing, overhauling, servicing, operation & maintenance of Drainage Pumping Plant 400 Set Rajbanshi Nagar, Patna for the session 2026-27. (1 st April 2026 to 31 March 2027 ) 0.00

7 Estimate for complete Annual Repairing, overhauling, servicing, operation & maintenance of Sewarage pumping Plant 800 set Shastrinagar under Mech. Work division , Patna for the session 2026-27 (1 st April 2026 to 31 March 2027 ) 0.00

8 Annual repair, operation & maintenance of Storm Drainage Pumping Station 80 SET RAJBANSHINAGAR for the years as session 2026-27 ( 1 April 2026 to 31 March 2027) 0.00

Project Director (Mech.)

Patna West (Mech.)

Works Division, Buidco, Patna.