CONSTRUCTION OF COMMUNITY HALL CUM WORK SHED WITH URINAL & WATER POINT AT VILL- LAUNDI, PANCHAYAT-PIPARDIH BLOCK-NAUHATTA ROHTAS

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

All kinds of soil.

Earth work in excavation in foundtion trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

All kinds of soil

1:2:4(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

1:4:8(1 Cement: 4 coarse sand:8 graded stone aggregate 40 mm nominal size)

Foundations, footings, bases for columns

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

Extra for providing and mixing water profing material in cement concrete work in the proportion recommended by the manufacturers.

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Edges of slabs and breaks in floors and walls.

Under 20cm wide

Weather shade, Chajjas, corbels, etc. including edges.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Cement mortar 1:4 (1 cement: 4 coarse send)

35 mm thick plain PVC door shutters

35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

25 mm thick (for cub-board) including nickel plated bright finished M.S.piano hinges with necessary screws

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

Fixed to steel windows by welding

Providing and fixing aluminium handles anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Twin rubber stopper

Windows

Steel windows

Steel ventilators

Providing and fixing pressed steel door confirming IS code 351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Profile B

Providing and fixing circular cast iron box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one ;pcf at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing bright finished brass casement window fastners of minimum weight 200 gms to side hung steel windows with necessary welding and machine screws etc. complete.

Providing and fixing bright finished brass peg stays 300mm long of minimum weight 330 gms. to side hung steel windows with necessary welding and machine screws etc. complete.

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders,

Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying apriming coat of approved steel primer

G.I pipes 40mm nominal bore(class B)

Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement

18 mm thick

Providing and fixing glass strips in joints of terrazo/cement concrete floors.

40 mm wide and 4 mm thick

Providing and laying Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brow laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigments etc. complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

Providing average 150mm thick dry rammed khoa beaten to 112mm (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved,curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar (1: 10) all complete as per building specification and direction of E/l,

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3(1 cement: 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

12mm cement plaster of mix:

1:6(1 cement: 6 coarse sand)

15mm cement plaster on the rough side of single or half brick wall of mix:

1:6(1 cement: 6 course sand)

20mm cement plaster of mix:

1:4(1 cement: 4 course sand)

6mm cement plaster to ceiling of mix:

1:4( 1 cement: 4 coarse sand)

White washing with lime to give an ever shade

New work (three or more coats)

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

New work (three or more coats)

Applying priming coat:

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations.(a) Applying and grouting a slurry coat of neat cement using 2.75kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand )admixed with proprietary water proofing compound conforming to IS:2645 over 20mm thick layer of cement mortar of mix 1:5 (1cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge.

With average thickness of 120 mm and minimum thickness at khurras point to be 65

Carriage of Materials:-

Bricks

Coarse sand

Stone chips

Local Sand

Providing Informatory Board with all complete Job

Providing Inaguration Board with all complete Job

Bricks

Coarse sand

Stone chips

Local Sand

Total

100 mm dia

Sand cast iron S & S pipe as per IS:1729

100 mm dia

Sand cast iron S & S pipe as per IS:1729

Sand cast iron S & S pipe as per IS:1729

100 mm dia

Sand cast iron S & S pipe as per IS:1729

110mm diameter

Coupler

110mm bend

Shoe (Plain)

110mm Shoe

DRAINAGE

With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5

HAND PUMP

125 mm dia UPVC Casing Pipe confirming to IS : 12818-1983/1992

32 mm dia medium quality G.I. Riser Pipe and 8 Nos. 3 mtre length (3 mtr each length confirming IS:1239

125 mm dia x 40 mm x UPVC reducing socket (Heavy Quality)

40 mm nominal outer dia CPVC Pipe

Supplying drain 3 m as per design etc. all complete job.(Detail Est Attached)

For 125 mm dia UPVC Pipe

For 40 mm dia pipe from 30 meter deep to 61.0 meter

Supplying labour and equipment including 125 mm dia G.I. cap & fitting and fixing over the T/W properly and taking it out as per direction of E.I. (Cap will be property of the contractor) 1 No.

Providing all labours for fitting and fixing of India mark II hand pump including supplying all tools and plants requred for the all job complete as per direction of E/I.

Supplying all tools equipment all labours for lowering 32 mm dia medium quality G.I. Pipe (Riser pipe) in drilled T/W in 3 mtrs lenth

Providing all labour for fitting and fixing of deep cylinder with the riser pipe including necessary connecting and jointing materials, chrom leather bucket all tools & plants required for the job low water lever all complete job as per specification and direction of E/I.

Supplying all materials & labours for arrangement of additional water required during the drilling work all complete job as per specification and direction of E/I.

Developing and t Testing of T/W till the discharge is free from sand one item all complete job as per specification and direction of E/I.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes,royalty all complete as per building specification and direction of E/l,

Providign 100A B/W(1:6) in superstructure etc. all complete job.

50 mm size brick aggrigate outer side of soak pit

Carriage of materials

Brick

Local sand

Supplying and fixing suitable size GI/PVC box on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet & 6A switch piano type connection painting etc. as required.

Supplying and drawing low resistance co-axial T.V cable RJ-6 grade copper conductor PE insulated, with PVC sheath in the existing PVC concuit etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.

2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (Circuit wiiring)

4 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire

Supplying and fixing metal box of following size in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

75mmX75mmX60mm

Supplying and fixing of following rating C series MCB suitable for inductive and other loads of following poles in the existing MCB DB complete witth connections ,testing and commissioning etc. as required .

6 Amp. To 32 Amp. SP MCB 240 Volt

32 Amp SPN MCB 240 Volt

Supplying and fixing bulkhead fitting die cast aluminium alloy body with prismatic glass cover suitable for the GLS/CFL lamp directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated, copper conductor single core cable etc. as required.

Supplying and fixing 2 pin 5 Amp ceiling rose on the existing junction box/ PVC box including connection etc as required.

Supplying and fixing batten / angle holder including connections with 1.5 sq.mm FR PVC insulated, copper conductor single core cable etc. as required.

Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :

300 mm dia piles

Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

Providing and laying in position machine batched and mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved desing mix, Including pumping of concrete to site fo laying but excluding the cost of centering, shuttering, finishing an including retard setting of concrete, Improve workability withoutt impairing strength and admixtures in recommended proportions as per IS:9103 to accelerate, reinforcement, durability as per direction of Engineer-incharge, Note:- Cement content considered in this item is @ 330kg/cum, Excess or less cement used as per design mix is payable or recoverable separetely.

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Centering and shuttering including strutting, propping etc. and removal of form for:

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Edges of slabs and breaks in floors and walls.

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

Mild steel 6.00mm dia

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all complete.

Fixed to openings / wooden frames with rawl plugs screws etc.

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders,

15mm cement plaster on the rough side of single or half brick wall of mix:

1:6(1 cement: 6 course sand)

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

New work (three or more coats)

Applying priming coat:

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Carriage of Materials:-

Difference Cost of materials :-

Bricks

Coarse sand

Stone chips

Local Sand

LAEO WD-01 SASARAM ROHTAS

GROUND FLOOR

AREA (Sq.Mtr)

CIVIL COST OF BUILDING

COMPLETE P.H.E. WORKS COST

ELECTRIC WORKS

BOUNDARY WALL

CONTINGENCY (0.5%)

LAEO WD-01 SASARAM

DESCRIPTION

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

All kinds of soil.

Earth work in excavation in foundtion trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

All kinds of soil

1:2:4(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

1:4:8(1 Cement: 4 coarse sand:8 graded stone aggregate 40 mm nominal size)

Foundations, footings, bases for columns

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

Extra for providing and mixing water profing material in cement concrete work in the proportion recommended by the manufacturers.

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Edges of slabs and breaks in floors and walls.

Under 20cm wide

Weather shade, Chajjas, corbels, etc. including edges.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Cement mortar 1:4 (1 cement: 4 coarse send)

35 mm thick plain PVC door shutters

35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

25 mm thick (for cub-board) including nickel plated bright finished M.S.piano hinges with necessary screws

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

Fixed to steel windows by welding

Providing and fixing aluminium handles anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Twin rubber stopper

Windows

Steel windows

Steel ventilators

Providing and fixing pressed steel door confirming IS code 351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Profile B

Providing and fixing circular cast iron box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one ;pcf at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing bright finished brass casement window fastners of minimum weight 200 gms to side hung steel windows with necessary welding and machine screws etc. complete.

Providing and fixing bright finished brass peg stays 300mm long of minimum weight 330 gms. to side hung steel windows with necessary welding and machine screws etc. complete.

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders,

Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying apriming coat of approved steel primer

G.I pipes 40mm nominal bore(class B)

Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement

18 mm thick

Providing and fixing glass strips in joints of terrazo/cement concrete floors.

40 mm wide and 4 mm thick

Providing and laying Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brow laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigments etc. complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

Providing average 150mm thick dry rammed khoa beaten to 112mm (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved,curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar (1: 10) all complete as per building specification and direction of E/l,

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3(1 cement: 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

12mm cement plaster of mix:

1:6(1 cement: 6 coarse sand)

15mm cement plaster on the rough side of single or half brick wall of mix:

1:6(1 cement: 6 course sand)

20mm cement plaster of mix:

1:4(1 cement: 4 course sand)

6mm cement plaster to ceiling of mix:

1:4( 1 cement: 4 coarse sand)

White washing with lime to give an ever shade

New work (three or more coats)

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

New work (three or more coats)

Applying priming coat:

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations.(a) Applying and grouting a slurry coat of neat cement using 2.75kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand )admixed with proprietary water proofing compound conforming to IS:2645 over 20mm thick layer of cement mortar of mix 1:5 (1cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge.

With average thickness of 120 mm and minimum thickness at khurras point to be 65

Carriage of Materials:-

Bricks

Coarse sand

Stone chips

Local Sand

Providing Informatory Board with all complete Job

Providing Inaguration Board with all complete Job

Bricks

Coarse sand

Stone chips

Local Sand

Total

LAEO WD-01 SASARAM

ITEM NO

Providing znd installing cast in situ single under reamed piles

300 mm dia pile

Surface dressing of the ground

Earth work in excavation in foundation

Earth work in back filling

S/Filing Local sand in Foundation&Plinth

P/L PCC In

PCC 1:2:4 in

PCC 1:3:6 in plinth under floor

PCC 1:4:8 in foundation

Centering and shuttering for PCC work

Extra for providing water proofing material

Prov.RCC M20

All work up to plinth level

All work from plinth level upto floor V level

(a)Walls columns, pillars, posts cind struts

roof beam, Roof slab,Lintel,Stair case,Chajja, Band

Add for using extra cement in the items of design mix

quintel

Centering&shuttering

Foundation

Roof&landing

Shelves (Cast in situ)

Column

lintel (up to 1.5m span)

Edges of slab under 20 cms wide

chajja

Extra for additional height in centring,

Reinforcement for RCC work

Ms 6 mm dia

TMT 8mm dia

TMT 10mm dia

TMT 12 mm dia

TMT 16mm dia

100A Brick work in Cm 1:6 in F/p

Extra for Brick work in superstructure above plinth level

7 cm Brick work with bricks ofclass 100A in CM

Half brick work with bricks of100 in cm 1:4

Extra for half Brick masonry in superstructure above pinth level

Extra for providing 2 nos 6 mm dia ms bars

Sal wood in choukhat of doors

Providing and fixing factory made P.V.C. door frame

Providing and fixing factory made panel PVC door shutter

P/F non decorative flush door shutter

30mm thick non decorative flush door shutter

25mm thick non decorative flush door shutter

P& F M.S grills

Fixed to steel windows Vide-/10.12.1

P & F cupboard or ward robe locks

Providing and fixing aluminium but hinge

P&F Alluminium sliding door bolt

P&F Alluminium sliding tower bolt

P&F Alluminium handles

P&FAlluminium hanging floor door stopper

Bright finished 100mm mortice lock

Providing and fixing aluminium tee curtain rod

P&F steel windows& ventilator

Extra for steel beading

steel windows -

steel ventilator -

Providing and fixing pressed steel door

Providing and fixing circular cast iron box for ceiling fan clamp

Steel window fastner

Steel window peg stays

Steel work welded in built up sections

40mm dia G.I pipe in stair hand rail

40 MM Th.Cement concrete flooring 1:2:4(

18 mm th.Cement plaster 1:3 in skirting

Providing and fixing glass strips

Providing and Laying 300 x300 mmCeramic

Ceramic glazed wall tiles in dado

100A one brick flat soling in plinth

Providing average 150mm thick dry rammed khoa

Making Khurras

Internal Cement Plaster

15mm CP 1:6 in internal surfaces

20mm CP 1:4 in external surfaces

6mm CP 1:4 in ceiling

12 mm cement plaster 1:3

White Lime wash

Water proof cement paint

Applying priming coat

Pink or grey primer on wooden surfaces

yellow primer on steel surfaces

synthetic enamel paint on wooden & steel

Forming groove of12x12mm and up to

Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations.(a) Applying and grouting a slurry coat of neat cement using 2.75kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand )admixed with proprietary water proofing compound conforming to IS:2645 over 20mm thick layer of cement mortar of mix 1:5 (1cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge.

With average thickness of 120 mm and minimum thickness at khurras point to be 65

Local Sand

Brick Flat Soling

70 mmth B/W 1:3

50mm DPC 1:2:4

12mm C.P 1:3 Neat

40mm Th C.C. Flooring

18mm Th C.P 1:3 In Skirting

Ceramic Tiles in dado

Kota+Marble Flooring

Kota+Marble Skirting

20mm Th C.P 1:3 In Water Proofing

120mm Th I.C. Based Water Proofing

Ceramic floor tiles

L.sand

Brick bats

LAEO WD-01 SASARAM

Cement

Local Sand

Brick Flat Soling

70 mmth B/W 1:3

Kota+Marble Flooring

Kota+Marble Skirting

Ceramic Tiles in dado

20mm Th C.P 1:3 In Water Proofing

120mm Th I.C. Based Water Proofing

Ceramic Floor Tiles

Mosaic Tiles in skirting over 12mm th.CP (1:3)

Mosaic Tiles Flooring over 20mm th. (1:4)

100 mm dia

Sand cast iron S & S pipe as per IS:1729

100 mm dia

Sand cast iron S & S pipe as per IS:1729

Sand cast iron S & S pipe as per IS:1729

100 mm dia

Sand cast iron S & S pipe as per IS:1729

110mm diameter

Coupler

110mm bend

Shoe (Plain)

110mm Shoe

DRAINAGE

With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5

HAND PUMP

125 mm dia UPVC Casing Pipe confirming to IS : 12818-1983/1992

32 mm dia medium quality G.I. Riser Pipe and 8 Nos. 3 mtre length (3 mtr each length confirming IS:1239

125 mm dia x 40 mm x UPVC reducing socket (Heavy Quality)

40 mm nominal outer dia CPVC Pipe

Supplying drain 3 m as per design etc. all complete job.(Detail Est Attached)

For 125 mm dia UPVC Pipe

For 40 mm dia pipe from 30 meter deep to 61.0 meter

Supplying labour and equipment including 125 mm dia G.I. cap & fitting and fixing over the T/W properly and taking it out as per direction of E.I. (Cap will be property of the contractor) 1 No.

Providing all labours for fitting and fixing of India mark II hand pump including supplying all tools and plants requred for the all job complete as per direction of E/I.

Supplying all tools equipment all labours for lowering 32 mm dia medium quality G.I. Pipe (Riser pipe) in drilled T/W in 3 mtrs lenth

Providing all labour for fitting and fixing of deep cylinder with the riser pipe including necessary connecting and jointing materials, chrom leather bucket all tools & plants required for the job low water lever all complete job as per specification and direction of E/I.

Supplying all materials & labours for arrangement of additional water required during the drilling work all complete job as per specification and direction of E/I.

Developing and t Testing of T/W till the discharge is free from sand one item all complete job as per specification and direction of E/I.

LAEO WD-01 SASARAM

Estimated Cost:

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes,royalty all complete as per building specification and direction of E/l,

Providign 100A B/W(1:6) in superstructure etc. all complete job.

50 mm size brick aggrigate outer side of soak pit

Carriage of materials

Brick

Local sand

Coarse sand

Stone chips

Bricks

Coarse sand

Stone chips

Local Sand

LAEO WD-01 SASARAM

Supplying and fixing suitable size GI/PVC box on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet & 6A switch piano type connection painting etc. as required.

Supplying and drawing low resistance co-axial T.V cable RJ-6 grade copper conductor PE insulated, with PVC sheath in the existing PVC concuit etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.

2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (Circuit wiiring)

4 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire

Supplying and fixing metal box of following size in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

75mmX75mmX60mm

Supplying and fixing of following rating C series MCB suitable for inductive and other loads of following poles in the existing MCB DB complete witth connections ,testing and commissioning etc. as required .

6 Amp. To 32 Amp. SP MCB 240 Volt

32 Amp SPN MCB 240 Volt

Supplying and fixing bulkhead fitting die cast aluminium alloy body with prismatic glass cover suitable for the GLS/CFL lamp directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated, copper conductor single core cable etc. as required.

Supplying and fixing 2 pin 5 Amp ceiling rose on the existing junction box/ PVC box including connection etc as required.

Supplying and fixing batten / angle holder including connections with 1.5 sq.mm FR PVC insulated, copper conductor single core cable etc. as required.

LAEO WD-01 SASARAM

ROHTAS

DESCRIPTION

Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :

300 mm dia piles

Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

Providing and laying in position machine batched and mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved desing mix, Including pumping of concrete to site fo laying but excluding the cost of centering, shuttering, finishing an including retard setting of concrete, Improve workability withoutt impairing strength and admixtures in recommended proportions as per IS:9103 to accelerate, reinforcement, durability as per direction of Engineer-incharge, Note:- Cement content considered in this item is @ 330kg/cum, Excess or less cement used as per design mix is payable or recoverable separetely.

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Centering and shuttering including strutting, propping etc. and removal of form for:

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Edges of slabs and breaks in floors and walls.

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

Mild steel 6.00mm dia

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all complete.

Fixed to openings / wooden frames with rawl plugs screws etc.

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders,

15mm cement plaster on the rough side of single or half brick wall of mix:

1:6(1 cement: 6 course sand)

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

New work (three or more coats)

Applying priming coat:

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Carriage of Materials:-

Bricks

Coarse sand

Stone chips

Local Sand

TOTAL

LAEO WD-01 SASARAM

ITEM NO

Providing znd installing cast in situ single under reamed piles

300 mm dia pile

S/Filing Local sand in Foundation&Plinth

100A one brick flat soling

Prov.RCC M20

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Add for using extra cement in the items of design mix

quintel

Centering&shuttering

Column

Reinforcement for RCC work

Ms 6 mm dia

TMT 8mm dia

TMT 10mm dia

TMT 12 mm dia

TMT 16mm dia

100A Brick work in Cm 1:6 in F/p

Extra for Brick work in superstructure above plinth level

P& F M.S grills

Fixed to opening

Steel work welded in built up sections

15mm th. Cement Plaster

White Lime wash

Water proof cement paint

Applying priming coat

yellow primer on steel surfaces

synthetic enamel paint on wooden & steel

Local Sand

Brick Flat Soling

L.sand

LAEO WD-01 SASARAM

Cement

Local Sand

Brick Flat Soling

70 mmth B/W 1:3

Kota+Marble Flooring

Kota+Marble Skirting

Ceramic Tiles in dado

20mm Th C.P 1:3 In Water Proofing

120mm Th I.C. Based Water Proofing

Ceramic Floor Tiles

Mosaic Tiles in skirting over 12mm th.CP (1:3)

Mosaic Tiles Flooring over 20mm th. (1:4)

Footing

column

plinth protection