Construction of Thozhi Working Womens Hostel building 70 Nos capacity (G plus 1 Floor) with development works at Udhagai Town in the Nilgiris District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt

1.6: Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6: Supply and filling of 40 mm HBSJ

2.7: Supply and filling of 20 mm HBSJ

7.2 : Providing Bitumen pad for Expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24 : Manufacturing & supply of steel windows (Weight basis)

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coat (slaked)

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3: Supply and planting avenue trees

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

52.1: G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

53.3: C.I Steps (5kg)

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 :Earthing Station IS3043 (Type I)

86 : Anti termite treatment

112. : S&F of 300 mm dia sweep AC exhaust fan

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Filling crushed stone sand

2.1.4 : Supply and Filling stone dust

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20mm HBSJ(using crushed stone sand) using

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm in Foundation and Basement

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In stilt / Ground Floor

c) In First Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and Basement

b.In Stilt / Ground Floor

c. In First Floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground Floor

b. In First Floor

14.1.1.I : Precast Cupboard slab 20mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Stilt / ground Floor

b. In First floor

14.1.1.II : Precast Cupboard slab 40mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation and Basement

16.1.1: Precast Jally ventilator 50mm tk.using standardised concrete mix M20 without vibrating charges.(using crushed stone sand) a. In Ground floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved surface

21.5.1.1 : Supply and fixing of Solid core flush door shutter of thickness 35mm a) door size 1000 X 2100 mm (Single leaf)

a) door size 1200 X 2100 mm (Single leaf)

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx 16 to 18mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) using plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Painting with two coat of Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Painting with two coat of Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1: Rain water harvesting using defunct borewell and providing perforated cover slab (M20) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 :Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : Supply and fixing of 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.4.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - other than G.F.(using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5. :PVC(SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.5.1 : Gully Trap using Country bricks of size 23 x 11 x 7cm (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.2.2 : PVC Equal Tee as per BIS 7834/1975 b. 160 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places

71. 2.1 : Supplying and fixing of 63Amps triple pole main switch with fuse and neutral link

75.1.2. : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1: Supply and fixing of Three phase ELCB/RCCB

98.3.2 : TW panelled door shutter (with brass fitting ) a. 1800 x 2400mm. (Double leaf)

112.1. : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1.: Supply & laying of stain free nano polished virtifed tile flooring with tiles size 600 x 600 x 8mm for flooring and other similar works in cement mortar 1:3 (one of cement and three of CS sand) 20mm thick including pointing

367: Providing wooden Melamine polish for new wood work

379.4.2.1: S & F of Granite slab of size 4'x2', 18 to 20mm Thick For kitchen arrangements (jet black) C.M 1:3, 20mm tk a) In Ground Floor

448.2. : Providing PVC Tee with end cap

ANNEXURE - II A1: Supply and laying of Hard core layer 300mm

A2: Supplying of stone dust including cost of materials and cost of conveyance etc., all complete and as directed by the departmental officers.(for paver block)

A3: Supplying of 3 to 10mm size HBSJ including conveyance and cost of materials etc., all complete and as directed by the departmental officers.

A4: Supplying, delivery and fixing of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges, laying of 83mm thick paver block and filling the gap between the paver blocks including cost of material and labour charges and machinery charges etc.,

A5: PVC Trims (Beading)

A6: One coat of wall putty for new walls and other similar works.

A7:Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

A8: UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm.

A9: Supply & Fixing of Qute / equivalent WPC solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms / Cub.Mt.. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve. A minimum of 4nos screws to be provided for each vertical member.

A10: Supplying & fixing of Stainless steel Hand Rails for Staircase

A11: Supplying and fixing of following dia MS pipe with 3.6mm thick including cost of all materials and all labour charges etc

A12: Supply and Fixing of CP two way bib cock with health faucet

A13: Supply and fixing of 9 watts LED bulb

A14: Supply and fixing of 4' 18 watts LED Tube Light

A15: Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

A16: Supplying and fixing of 25W LED street light fittings etc.,

A17:Supply and fixing of 12 watt LED bulb

A18: Run of 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

A19: Run of 4 Wires of 10 sqmm PVC insulated single core multi strand

A20: Supplying and delivery of Single Pole 6A to 32A, 10KA MINIATURE CIRCUIT BREAKERS 240 V / 415V 50HZ - AC Supply suiatble for both lighting and motor circuits etc., all complete and as directed by the departmental officers.

A21:SUPPLY AND FIXING OF GALVANIUM SHEET 0.47MM THICK

A22: Supply, installation, testing and commissioning of 25 KVA Diesel Generator set of approved makes like Kirloskar / equivalent as per the new CPCB norms complete with all accessories like engine, alternator, batteries with leads, control panel, base frame, antivibration mounts, residential silencer, 200 liters fuel tank, intake and exhaust piping, fuel oil hand operated pump, other miscellaneous accessories for the total set including test trial run at load for 6 hours.

A23: Supplying, testing and commission of 2 Ton Split Type AC Unit with copper coil 5 Star Rated Inverter (Carrier / Voltas /OGeneral / Equivalent) make consisting of outdoor condensing unit complete with compressor and air cooler condenser with fan motor and one indoor unit with evaporator blower etc., including initial charging of refrigerant gas and suitable for single phase operation (with cardless remote control facilities). All complete and as directed by departmental officers (The quality and brand of the AC unit should be got approved from the Executive Engineer before use)

A24: Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay

A25: Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit)

A26: Supply and fixing of MS stand for fixing outdoor unit

A27:Supply & fixing of 63 amps three phase 500 V 4 pole Change over switch including labour charges

A28: Supplying and fixing 3 Nos 100 Amps 500 volts grade/ well porcelin fuse unit on suitable teak wood plank

A29: Supply and errection of HDPE water tank 1000 Litres capacity with ISI mark

A30: Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum?Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (50litres)

A31: Supplying and fixing of Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN (make) ‘GAZEL’ (or) Equivalent (with ISI Monogram)

A32: Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level etc., all complete and as directed by the departmental officers. a) Using Hilux Board Plain Sheets (10mm thick)

R.SURESH BABU (BID ID -1420361)

JSR CONSTRUCTIONS (BID ID -1420550)