CA NO. GE (W)/HSR-13/2024-25 REPAIR REPLACEMENT OF CERTAIN B R WORKS LIKE STAIRS CONNECTING PATH RAILING AND OTHER MISC WORK OF ZONE B

Amount

Demolition of RCC in floors (other than ground floors), beams staircases, landing, chajjas, slab and similar suspended work, including removing out of MD Land complete all as specified and directed. Note : Demolition work is to be carried out in portion of building hence necessary scaffolding and safety measures required to support adjacent portions of bldg are deemed to be included in quoted rates.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar (1:6) including demoliton existing article/item/portion etc complete all as specified and directed.

Brickwork with fly ash' brick straight or curved on plan to any radius in half brick thick walls built in Cement mortar 1:4. including dismantling/ demolition of existing wall complete all as specified and directed.

M&L RCC M-25 using 20mm stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M-25 using 20mm stone aggregates as in Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC M-25 using 20mm stone aggregates as in Chajjas etc complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia complete all as specified and directed.

Description all as per item No 9.00 above but 6 to 8mm dia complete all as specified and directed.

Description all as per item No 9.00 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

Drilling holes in RCC , brick work and cement concrete etc upto depth 150mm by using mechanical dril machine for fixing bolts, TMT bar etc in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

Supply and Providing precast cement concrete (1:3:6) type C-0 using 12.50mm stone aggregate as in louvres and jallies 25mm thick (measured solid), including all mouldings but excluding frame set in cement mortar (1:6), including dismantling existing jallies/louvers of any description and fixed in any position including Pre cast frame complete all as specified and directed.

Providing precast cement concrete (1:3:6) Type C-1 using 20mm graded stone aggregates and set in CM (1:6) in window or door cills, lintels,bressumers, teps,quoin blocks (for use with masonry), string courses, copings.kneelers, apex stones, pier caps,columns, posts,boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including hamfers, weatherings, throat-ing etc. and setting in mortar complete with joints to match complete all as specified and directed.

Removing all disintegrated and loose concrete of any thickness including plaster if any in RCC coloumn, chajjas, slab, beam, lintel etc removing all loose rust/scale from exposed reinforced bars by using wire brushes and sand paper and reinforced with IRC fabric 50mmx50mmx12 gauge to reinforcement and apply concrete bonding primer uniformly to exposed surfcae and apply cement sand concrete mortar (1:3:1) (1 part cement : 3 Part sand : 1 Part 6mm coarse Aggregate) Average Thickness shall not less than 20mm and removing debris all as specified and directed.(Note : IRC fabric shall be measured and paid separtely as supply only)

Supply only IRC 50mmx50mmx 12 gauge mesh complete all as specified and directed.

Complete removal of existing treatment on walls and roughening surfaces of old plaster by picking sweeping clean and washing down with water to remove dust etc to receive rough plaster complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:4 as in backing coat for rough plaster including taking down of existing plaster complete all as specified and directed.

M&L for Rough cast plaster with rough mixture consisting of crushed stone or fine gravel agg, size 6 to 12mm mixed with course sand and cement in the ratio of 1:1:1 shall be applied and finished even on external wall including taking down of existing plaster complete all as specified and directed.

M&L for Dubbing out average OF CM (1:6), 15mm thick on irregular face of walls /Ceiling complete all as specified and directed.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 by adding WPC @ 3% by wt of cement finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid seperately.

M&L rendering 5mm thick plaster on concrete surfaces as in ceiling in Cement Mortar (1:3) including finish even and smooth with out using extra cement complete all as specified and directed.

M&L two coat of cement base paint over a coat of primer including preparation of newly plaster surface complete all as specified and directed.

M & L one coat of cement base paint on old surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L one coat of oil bound distemper on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L three coat of white wash on ceiling surface including preparation of newly plaster surface complete all as specified and directed.

Description all as per item No 27.00 above but one coat white wash on old ceiling surface complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290(Gde E-165) including dismantling existing similar items and removing from site complete all as specified and directed.

Fixing only Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290(Gde E-165) including dismantling existing similar item and repair by using mechanically or hand tools as required and replace damage parts/portion the existing item before refixing the same complete all as specified and directed.

M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over one coat of redoxide primer area Exc 10 cm width or girth complete all as specified and directed.

M&L preparing old steel surfaces and applying one coats of synthetic enamel paint area Exc 10 cm width or girth complete all as specified and directed.

M&L for chequered cement concrete tiles(30 cm x 30 cm/25cmx25cm) x 25 mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:4, including 50mm thick PCC (1:5:10) using 20mm graded stone aggregate as sub base including demolition of existing tiles etc complete all as specified and directed.

M&L for 50mm thick PCC (1:2:4), using 20mm graded stone aggregate as floor finishing even and smooth without using extra cement etc. complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2, using 40mm graded stone aggregate as sub base of floor finishing even and roungh complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick in floor / steps, laid over and including 20mm thick rendering to receive the stone in cement mortar 1:4 and jointed including demolition of existing tiles etc complete all as specified and directed. Note:Kota stone shall be provided on lt in one piece in steps (Tread)

Description all as per item No. 37.00 above but kota stone slab 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:4 and jointed including demolition of existing tiles etc complete all as specified and directed. Note : Kota stone shall be providedonlt in one piece in steps (Riser)

S&F 50mm dia PVC rain water pipe of pressure single socketed with rubber joint, jointed with solvent joint fixed to wall in repair complete all as specified and directed.

Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each resecuring, easing and adjusting and refixing in the same opening complete all as specified and directed.

S&F in Repair vitreous chinawareTable top wash hand basin of size 460x460x170mm, including cutting for and pinning in ends of brackets or erecting stand , waste pipe/Brass CP bottle trap, etc complete all as specified and directed.

S&F in repair 5.50mm thick Glass bevelled edge looking mirror complete all as specified and directed.

S&F in Repair 15mm bore Pillar taps, cast copper alloy, fancy type with Pop up head long shank,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm in repair complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement including Demolition of cement concrete (PCC) complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed including dismantling old AC/CGi or any patteren old sheet and removing from site complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick, joint free (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match including dismantling complete all as specified and directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / thick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match including dismantling complete all as specified and directed.

M&L for 20mm thick Granite (one piece) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old tiles/stone slab/ etc complete all as specified and directed.

S&F Universal shield cover for water storage tank made of mild steel sheet,Ms flat with mild steel nut and botl as specified by manufacture complete all as specified and directed. Make:- Dhakkan wala and equivalent

M/s Jai Hanuman Construction

M/s Rao Constructions, 1173 Urban Estate-II, Hisar

m/s krishna engineers1