SPECIAL REPAIR TO DRAINS AT CERTAIN PLACES AND PROVISION OF TEMPORARY STORAGE ACCN FOR GE (AF) VAYUSENA NAGAR NAGPUR

Amount

SPECIAL REPAIR TO DRAINS

Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as per specified and as directed

Removing excavated material n exc 50 m and depositng where directed at a level n exc 1.5 m above the starting points all as specified and directed.

M & L for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in foundation for manholes & drains completed all as specified and directed.

Demolition of brickwork or stone/ boulder masonry built in cement mortar or cement lime mortar completed all as specified and directed.

Material and labour for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 all as specified and as directed.

Material and labour for for brickwork except bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 including cleaning of old brick obtained from demolition etc all as specified and as directed

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Material and labour for for rendering 15 mm thick in CM 1:4 over brick or concrete surfaces, finished even and smooth without using extraa cement all as specified and as directed.

Material and labour for type B-1, 1:2:4 (20MM graded stone aggregate, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for

Material and labour for precast RCC 1:2:4 type B1 as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 etc all as specified and as directed.

Material and labour for mild steel TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking , bending and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

Material and labour for Reinforced concrete pipes, class NP2 600mm dia, laid and jointed complete with collars complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for 70 mm thick plain cement concrete 1:2:4,type B-1, using (20mm graded stone aggregate) complete all as specified and as directed.

Material and labour for for 75 mm thick PCC in 1:4:8 type D2 using (40 mm graded stone aggregate) as in floors, path & hard standing etc all as specified and as directed.

Material and labour for for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Material and labour for for preparing new surfaces of stonework of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of priming paints plaster coat all as specified and as directed.

Taking down of old factory made factory made machine pressed rubble moulded precast conctete interlocking paver block any shape and size

Material and labour for for factory made machine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 grade over and including 50 mm thick stone dust cousioning all as specified and directed

Material and labour for refixing of factory made nachine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over all as specified and directed

Material and labour for cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles all as specified and as directed

Supply and fix in repair 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified and directed.

PROVISION OF TEMPORARY STORAGE ACCN

Excavation in trenches n. exc 1.5 mtr wide & n. exc 1.5 mtr depth; for foundations, etc. n. exc. 10 sqm on plan and n. exc. 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) including demolition of existing brick work where ever required complete all as specified and directed.

Material and labour for for 10 mm thick rendering (internal) on fair faces of block masonry or concrete surfaces of wall in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for for 5 mm thick rendering on fair faces of concrete surfaces of ceiling in CM (1:3), finished even and smooth without using extra cement complete.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in hard/dense soil, complete all as specified and directed by Engr –in-Charge.

Removing of excavated material (soil) to a distance exc 250mtr but n. exc. 500mtr and depositing complete all as specified and directed.

Material and labour for for plain cement concrete, type D-2 (1:4:8) (using 40mm graded crushed stone aggregate), as in foundation filling and mass concrete and sub base of floors complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone agg as in plinth protection finished even and smooth w/o using extra cement complete all as specified and directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth eams; and similar work; vertical or to batter complete all as specified and directed.

Material and labour for for Formwork to sides and soffits of floor or roof beams, lintels, shelves etc complete

Material and labour for Formwork to chullah hoods, cha jjas, troughs and similar items in cluding edges complete all as specified and directed.

Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Material and labour for TMT Bars 10 mm dia & over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Description all as per item here- in- before, but 8 mm dia as in reinforcement complete all as specified and directed by Engineer-in-Charge.

Description all as per item here- in- before, but 5 to 10mm dia as in stirupps complete all as specified and directed by Engineer-in-Charge.

Material and labour for for RCC type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in plinth beams and mass concrete etc complete all as spd.

Material and labour for RCC type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in chajja and mass concrete etc complete all as spd.

Material and labour for RCC type B1,1:2:4 (using 20 mm graded crushed stone aggregate) roof beams, cantilevers, lintels over 1.5m span complete all as spd.

Material and labour for RCC type B1,1:2:4 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and as directed.

Surface dressing n.exc 15cm deep in soft/loose soil complete all as specified and as directed.

Material and labour for hardcore of gauge exc. 63mm but n. exc. 100mm deposited spread and levelled in layers n. exc. 15cm thick, watered and rolled and rammed to a true surface with broken stone or boulders as in hardstanding complete all as specified and as directed.

Material and labour for moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Material and labour for for 100mm thick, PCC 1:4:8, type D -2 (using 40 mm graded crushed stone aggregate), as in sub base of floor’s complete all as specified and directed by Engr-in- Charge.

Material and labour for 50 mm thick, PCC 1:2:4, type B -1(using 20 mm graded crushed stone aggregate), as in floor finshesh complete all as specified and directed by Engr-in- Charge.

Material and labour for preparation of newly plastered surfaces of walls, and applying two coats of cement based paint over a coat of cement primer complete all as specified.

Material and labour for for preparation of new plastered surfaces of wall and applying two coats of oil bound distempr over a coat of primer complete all as specified and s directed.

Material and labour for for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and s directed.

Material and labour for preparing new steel and iron surfaces of any description, over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and s directed.

Material and labour for pressed steel frames (size 165 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and s directed.

Supply and fixing flush shutters 30 mm thick, solid core construction, with blockboard core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Steel windows with side hung shutters including projecting type hinges with steel handle, and teel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

Material and labour for aluminium alloy, anodised, sliding door bolt (250mm long) with hasp,nstaple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-uminium alloy and fixed complete all as specified and as directed

Material and labour for floor door stopper 140 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fix stainless steel butt hinges medium weight size 100 mm long complete all as specified and as directed.

Supply and fix aluminium handles cast type anodised size 150 mm long complete all as specified and as directed

Supply and fix aluminium anodised barrel tower bolt of extruded section size 200 mm complete all as specified and as directed

Material and labour for roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat ections) including distance pieces, cleats etc.confirming to Fe 410 -W (Gde E- 250) quality A complete all as specified and as directed.

Supply and fix of pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Material and labour for ATT (Anti termite treatment) and treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

Material and labour for for ATT (Anti termite treatment) and treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

Material and labour for for ATT (Anti termite treatment) and Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

Material and labour for for ATT(Anti termite treatment) and treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

Supply only Integral waterproofing compound.

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.

(a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c) One switch socket outlet modular type 3 pin 6 amp on same board.

All as per item No 70 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

All as per item No 70 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Note for Item No. 70 to 75 :- The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate for point wiring shall be deemed to include the cost of making good.

Supply & fix master led tube 4ft 20 W LED batten of high-quality materials and design, extruded aluminum housing enhances safety, High quality PC diffuser. reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/ Wipro.

Supply & fix 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531 or equivalent in SEIMENS, Anchor Roma.

Supply & fix switch modular type, single pole one way 6 Amps, 250 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in SEIMENS/ Anchor Roma.

Supply & fix socket modular type 6 Amps 3 pin 2 module 250 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in SEIMENS/ Anchor Roma.

Supply & fix for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.Make : Leader, Anchor

Supply & fix socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in Schneider/Seimens.

Supply & fix switch modular type 16 Amps,one way with indicator, 1 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in Schneider/Seimens.

Supply & fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507611 or equivalent in Schneider/Seimens.

Supply & fix MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408617 or equivalent in Schneider/Seimens.

Supply & fix MCB SP 10-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand or equivalent in Schneider/Seimens.

Supply & fix ceiling fan 1200 mm sweep in opal white colour and BEE 5 star rated BLDC type energy saving complete including provision of 3 core copper wire of size 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed. Make : Crompton Greaves/ Havells/ Orient/ Bajaj.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core.

Material and labour for High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 of size 25 mm dia laid in trenches for passing of LT cable complete all as specified and directed.

M/s Ashwin Bhange

M/S. YADAV ENTERPRISES

Varsha G Nagphase