REPAIR TO POTHOLES, ROAD AND SPEED BREAKERS WITH ROAD FURNITURE IN CERTAIN LOCATION UNDER AGE B/R-II AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.

Amount

M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm with paving bitumminous primer VG-10 grade and putting required (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller for pot holes exc 30mm depth complete all as specified and directed.

M&L for premix bituminous macadam laid, rolled and compacted to required gradient and camber using binder (paving bitumen VG-30) grade with 4% by weight of total mix (consolidated thickness 75 mm or less) all as specified in particular specifications. Note:- (i) The quoted rate shall be worked out on the basis of binder contents (bitumen VG-30) of 4% by weight of total mix. (ii) Work shall be executed as per design mix as approved by GE and less bitumen shall be deducted from the quoted rate.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. Note: (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.

S&F in repair speed bumps/breaker of size 340-380mm width and of height 50mm having high resistance to severe impacts and hard weather conditions made of sturdy plastic (black/yellow colour) & UV Stabilizers, studded with reflectors on either side complete all as specified and directed. Make:- Dark eye /Sinor Infrastructure/3M Green lite or equivalent make as approved by GE.

S&F in repair cat eyes ABS body with scratch and abrassion resistant, micro prismatic, polycarbonate and ultrasonically welded lenses, temperature resistance body of size 90x100x17mm fixed on road with bituminous adhesive as per manufactures instruction having resistant creamer coating and reflective surface complete all as specified and directed. Make-3M/Dark Eye/ Green lite/Sinor infrastructure/equivalent as approved by GE.

M&L for cleaning old/new dirt, oil/ grease spots and foreign materials etc, from road surface and applying 2.5mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved, having clear and sharp edges over road surfaces by using thermo plastic paint applicator machine and necessary T&P, including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arragement for traffic during operation etc. complete all as specified and directed. Make:- Asian/ Nerolac/ Berger Paints. Note:- Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecting beads in required proportion as per MORTH specification and conforming to relavent IS. (b) The Contractor will made proper arrangement for traffic diversion and safety rules during laving of painting on Roads.

S&F in repairs Heavy duty delineator with reflective tap bands made out of MS pipe of 55mm dia wall thickness in 3mm. Length of the delineator is 1000mm. MS pipe duly powder coated. Top cap 100mm dia fitted with MS bolt. Anti Theft net 360mm length and bottom dia of the net is 100mm. Reflective tape bands 1 No Red colour, 1 No amber colour & 1 No Green colour and 2 Nos in white colour. All bands are highly reflective type XI or type IV grade. Three bands of reflective tape 2 inch width red, amber & Green & 2 bands of 1 inch width white reflective tape including necessary excavation and earthwork and fixed in PCC (1:2:4) type B-1 of size 300mmx300mmx300mm complete all as specified and directed. Make- Dark Eye/3M/Sinor infrastructure/Green lite or equivalent make as approved by GE.

S&F in repair solar stud alumininum alloy powered with high efficiency solar monocrystalline solar panel (3.0 V/0.3 watt) Ni-MH rechargeble battery (1.2V/1.3AH) with 6 super bright LEDs 8mm, flash rate 60 to 70 times per minute normally, dimension-125mmx125mmx25mm (shank 67mm) including adhesive for fixing arrangement complete all as specified and directed. Make :- Dark eye Model DA 110 or Sinar Infrasture or equivalent make as approved by GE.

Demolition of cement concrete including tiles if any of any size n.exc 15 cm thickness (below or above ground level) unreinforced complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate, as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for taking down and refixing 80mm thick M-40 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 30mm thick sand cushion and joints filled with sand complete all as specified and directed.

M&L for 80mm thick M-40 grade factory made vibratory compacted cement concrete rubber moulded interlocking paver block in approved design and colour conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 30mm thick sand cushion and joints filled with sand complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregate as in lintels upto 1.5 clear span, cills, steps sersmic and other similar bands plinth courses, string course lacing courses, parapets and railings upto 60 cm in height, copings, edging concrete for paver boock, kerbs etc complete all as specified & directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed wtih cement mortar 1:3 (1 cement 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

A S ENTERPRISES (BID ID -3372653)

M/S A P CONSTRUCTION (BID ID -3379040)