(A) Making of pumping accessories like bend, nipples etc for Golepahari pump house and Dhori East pump house (B) Erection of 250 m 4 inch dia pipe line along with a 4 inch dia tanker point (C) Fabrication of three number rest shelter in respect of AA

Amount

Part A: Making of pumping accessories

Making of C-bend 8” dia.

Making of L-bend 8” dia.

Making of nipple pipe 8” dia.

Making of reducer pipe 8” to 6”

Fitting charge on item no. 1 to 4

Part B: Erection of 250 m 4 inch dia pipe line

Transporting of 4” dia pipeline to working site.

Laying of 4” dia pipe in position

Providing of 4” dia flange.

Welding of 4” dia flange on pipe.

Providing of 4” dia rubber joint.

Providing and fixing of nut bolt of required size.

Cutting of 4” dia pipeline.

Welding of 4” dia pipeline.

Making of 4” dia C-bend

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m disposed earth to be leveled and neatly dressed : Ordinary rock.

Erection of pole/pipe height above 9m to 10m

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia x 1.8 metres long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, bow tightener, 7/3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Loading, unloading including transporting of ¾” dia pipe, bend, nipple.

Laying of ¾” dia pipe line in normal surface

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with and finished paint as required.

Cutting of pipe.

Welding of pipe.

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100mm diameter : Class I

Part C: Fabrication of three number rest shelter

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.

Transporting of shelter.

Total impact of GST for the purpose of CTC

M/s Welltech Engineering works (BID ID -1142900)

Ram Charan Turi (BID ID -1142895)