COMPREHENSIVE MAINT TO MARRIED ACCN OF POCKET 1 2 4 IN DOMESTIC AREA AT AF STN SIRSA

Amount

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete and all as directed by Engineer-in-Charge.

M&L for Cement Concrete 1:4:8, type D-2 (40mm graded crushed stone aggregate) 75mm thick as in Fillings, Sub-base to Floors, etc. complete and all as directed by Engineer-in-Charge.

M&L for Cement Concrete 1:2:4 (12.5mm graded crushed stone aggregate) 25mm thick in Sub-base for laying/fixing of Tiles in Floor, complete and all as directed by Engineer-in-Charge.

M&L for Cement Concrete 1:2:4 (20mm graded crushed stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete and all as directed by Engineer-in-Charge.

Supply only for Plastic dividing strips, 1.5mm thick and 38mm , inserted in Floor to confirm design, complete and all as directed by Engineer-in-Charge.

M&L for Cement Concrete 1:3:6 Type C-2 (40mm graded crushed stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, complete and all as directed by Engineer-in-Charge.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete and all as directed by Engineer-in-Charge.

M&L for Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete and all as directed by Engineer-in-Charge. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L for Non-skid Coloured Ceramic joint free Tiles 400x400x7.0 to 8.0mm thick in skirting/dado, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete and all as directed by Engineer-in-Charge. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L for Coloured/Printed Glazed Ceramic Tiles 450x350x7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete and all as directed by Engineer-in-Charge. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L for Floor (Paver) Tiles 300x300x9.0 to 10mm, highly abrasive, Anti-skid, Impact Resistance, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete and all as directed by Engineer-in-Charge.

M&L for Granite (of any type) Tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete and all as directed by Engineer-in-Charge. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L for Granite (of any type) Tiles 20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete and all as directed by Engineer-in-Charge. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L for Machine cut Kota Stone Slab 20-25mm thick in Flooring, laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete and all as directed by Engineer-in-Charge. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L for Machine cut Kota Stone Slab 20-25mm thick in Riser of Steps, Skirting, Dado and Pillar, laid over 10mm thick backing coat of Cement Mortar 1:4 and joined with grey Cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete and all as directed by Engineer-in-Charge. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

Demolition Cement Concrete (Reinforced) of any description and in any position complete and removing debris, etc. to Outside MD/AF Land, complete and all as directed by Engineer-in-Charge.

M&L for Reinforced Cement Concrete 1:2:4, type B-1 (20mm gradded crushed stone aggre-gate) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete and all as directed by Engineer-in-Charge. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Item.

M&L for Reinforced Cement Concrete 1:2:4, type B-1 (20mm gradded crushed stone aggregate) in Chajjas, etc., complete and all as directed by Engineer-in-Charge. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Item.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete and all as directed by Engineer-in-Charge.

M&L for Formwork to Chullah Hoods, Chajja, throughs and Similar Items including Edges for Rough Finished Flat Surfaces of Concrete, complete and all as directed by Engineer-in-Charge.

M&L TMT Bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete and all as directed by Engineer-in-Charge.

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete and all as directed by Engineer-in-Charge.

M&L for Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 M mean Radius, built in Cement Mortar 1:6, complete and all as directed by Engineer-in-Charge.

M&L for Brick work with Sub-Class ‘B’ Bricks but except Bricks (Serviceable Bricks obtained from Item No. 23 here-in-before) including removing old Mortar, Straight or Curved on Plan exc. 6.0 M mean Radius, built in Cement Mortar 1:6, complete and all as directed by Engineer-in-Charge.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete and all as directed by Engineer-in-Charge.

M&L Rendering (Internal) 12mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete and all as directed by Engineer-in-Charge.

M&L for preparing New Plastered Surfaces of Walls by applying a Coat of Wall Care Putty including rubbing down with Sand Paper to obtain a smooth finish surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete and all as directed by Engineer-in-Charge.

M&L for Rendering (Ceiling)5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete and all as directed by Engineer-in-Charge.

M&L for preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete and all as directed by Engineer-in-Charge.

M&L for Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls/Concrete Surfaces mixing with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete and all as directed by Engineer-in-Charge. NOTE : WPC shall be Measured and Paid for as ‘Supply only’ separately under appropriate Item.

Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete and all as directed by Engineer-in-Charge..

M&L for preparing New Plastered Surfaces of Walls by applying a Coat of Chalk Whiting (as Preparatory Treatment) and applying Two Coats of Weather Coat Exterior Paint over a coar of cement primer with approved Tint as per manufacturer's instructions, complete and all as directed by Engineer-in-Charge.

M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete and all as directed by Engineer-in-Charge.

M&L for preparing New Rough Cast Plastered Surfaces of Walls by applying Two Coats of Weather Coat Exterior Paint over a coat of cement primer with approved Tint as per manufacturer's instructions, complete and all as directed by Engineer-in-Charge.

M&L for Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, and fixed-in-repairs, and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of 1.5 mm thick wall care putty for priming the surface complete and all as directed by Engineer-in-Charge.

Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Sqm Each, complete and all as directed by Engineer-in-Charge.

S&F Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete and all as directed by Engineer-in-Charge.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick Wood grain printed PVC sheet consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails of Mild Steel Frame shall be covered with Heat Moulded Wood Grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width Stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood Grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles & Rails with suitable 5.0mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mmx10mm (90°) and jointed together with Solvent Cement and fixing in the Frame at Site, complete and all as directed by Engineer-in-Charge.

S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete and all as directed by Engineer-in-Charge.

S&F Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete and all as directed by Engineer-in-Charge.

S&F Aluminium Handle 125mm long (weight not less than 90 Gram), Cast type, anodised, complete and all as directed by Engineer-in-Charge.

Taking down Pressed Steel Frame of any description (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete and all as directed by Engineer-in-Charge.

Taking down Shutter of any description, exc. 1.00 Sqm but not exc. 2.00 Sqm each,complete and all as directed by Engineer-in-Charge.

S&F Pressed Steel Frame for door of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete and all as directed by Engineer-in-Charge.

S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc.,complete and all as directed by Engineer-in-Charge.

M&L Cement Concrete 1:3:6 type C-1(20mm graded crushed stone aggregate) as in filling Back side of Pressed Steel Frame, complete and all as directed by Engineer-in-Charge.

M&L for Flush Shutters of 30mm thick, sloid core construction with block board core and plywood face panels, cmmercial type on both sides and fitted to Steel Frame, complete and all as directed by Engineer-in-Charge.

S&F for Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood (factory made) prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete and all as directed by Engineer-in-Charge.

M&L for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples,complete and all as directed by Engineer-in-Charge.

M&L for Galvanised steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F for Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete and all as directed by Engineer-in-Charge..

S&F Mild Steel Sliding Door Bolts having length of Bolt 300mm, plate type, stove enamelled black, with bright Bolt not less than 12mm dia with and including a minimum of 6 Bolts and Nuts, 4 on Bolt Plate and 2 on Staple Plate and fixed, complete and all as directed by Engineer-in-Charge.

S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete and all as directed by Engineer-in-Charge.

S&F Floor Door Stopper 150mm in size, Aluminum alloy Body and Tongue with Hard Drawn Steel Spring (weight not less than 90 Gram), complete and all as directed by Engineer-in-Charge.

S&F Mild Steel 150mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete and all as directed by Engineer-in-Charge.

S&F Mild Steel 150mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

M&L for preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete and all as directed by Engineer-in-Charge.

Taking down Steel Window, Ventilator Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, not exc. 1.00 Square Metre Each, complete and all as directed by Engineer-in-Charge.

S&F Steel windows or ventilators, fixed type, with glazing bars complete and all as directed by Engineer-in-Charge.

Taking down Steel Window Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete and all as directed by Engineer-in-Charge.

S&F Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete and all as directed by Engineer-in-Charge. NOTE :- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under appropriate Item. MAKE : RAM FABRICATORS PVT LTD, PANCHKULA/ GANPATI DOORS, RAJPURA/ FRIENDS MANUFACTURING COMPANY, KOTKPURA (PUNJAB)

M&L Cutting Holes in Brick Walls, exc. Half Brick but not exc. One Brick thick, built in Cement Mortar for inserting of Cooler Stand, Lugs and Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded crushed stone aggregate) or Cement Mortar 1:3 (as required) and adjoining Surfaces in Cement Mortar 1:4, complete and all as directed by Engineer-in-Charge.

Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old Glazing Pins/Spring Clips, complete and all as directed by Engineer-in-Charge..

S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete and all as directed by Engineer-in-Charge.

S&F Sheet Glass 4.0mm thick, Frosted quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete and all as directed by Engineer-in-Charge.

Dismantling Structural Steel or Mild Steel Work of any description not otherwise provided for, complete and all as directed by Engineer-in-Charge.

M&L for Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and similar Work, conforming to Fe-290, Gde-E-165, complete and all as directed by Engineer-in-Charge.

Dismantling plain or corrugated steel/fibre sheeting of any gauge or thickness including nanital or similar pattern roof covering complete and all as directed by Engineer-in-Charge.

M & L for 2mm thick fibre glass reinforced transulcent Corrugated sheeting with two corrugations side lap fixed fixed with coach screw and washer in roof wall complete and all as directed by Engineer-in-Charge.

M&L for Running Welding Work exc. 2.5 Cm but not exc. 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/Guard Bars/ Gate/ Grills etc. Guard Bars in repairs, providing new Hinges to make the Steel Members Functional (as required) including painting the Steel Member to match the existing, complete and all as directed by Engineer-in-Charge.

M&L for preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete and all as directed by Engineer-in-Charge.

Dismantling/Taking down old existing Wooden Built-in Cup Boards of size 200x100x60 Cm (approx/nearest size) of any description including Making Good to dismantled portion of Brick Walls with Cement Concrete 1:2:4 (20mm graded crushed stone aggregate) or Cement Mortar 1:3 (as required) and adjoining Surfaces in Cement Mortar 1:4, complete and all as directed by Engineer-in-Charge.

S&F Pressed Mild Steel Shutter 1.0mm thick for Built-in Steel Cup Board, Godrej Pattern, made to Shape and Size as required/ordered at Site, necessary Welding etc. and fixing to Pressed Steel Frame, Locking Device with cover & Mild Steel Handle,Hanging Rod made out from Conduit Pipe 19mm dia, 1.6mm Wall thickness for Built-in Steel Cup Board, Godrej Pattern, including Set of Mild Steel Socket Chromium plated to hold Conduit Pipe Hanging Rod 19mm dia for Built-in Steel Cup Board, Godrej Pattern, inclduding set of Mild Steel Peg Set (Set of 3) for Built-in Steel Cup Board, Godrej pattern, including Spary Painting with Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide Zinc Chrome Primer, complete and all as directed by Engineer-in-Charge.

S&F Stainless Steel Curtain Rod 25mm dia/bore with teak wood finish (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete and all as directed by Engineer-in-Charge.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete and all as directed by Engineer-in-Charge.

Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete and all as directed by Engineer-in-Charge.

Fixing old Steel Tubing 15mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 76 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required/ordered at Sites), complete and all as directed by Engineer-in-Charge.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete and all as directed by Engineer-in-Charge.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation,complete and all as directed by Engineer-in-Charge.

Fixing old Steel Tubing 20mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 79 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required/ordered at Sites), complete and all as directed by Engineer-in-Charge.

M&L for preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of White Wash, complete and all as directed by Engineer-in-Charge.

M&L for preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying One Coat of White Wash,complete and all as directed by Engineer-in-Charge.

M&L for Complete Removal of existing Surface Treatment from Walls, applying a Coat of Wall Care Putty 1.5 minimum thick including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved), complete and all as directed by Engineer-in-Charge.

M&L for preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of Distemper Oil Emulsion (as approved), complete and all as directed by Engineer-in-Charge.

M&L for preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of Weather Coat Exterior Paint with approved Tint as per manufacturer's instructions, complete and all as directed by Engineer-in-Charge.

M&L for preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete and all as directed by Engineer-in-Charge.

M&L for preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete and all as directed by Engineer-in-Charge.

S&F for Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F for Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

M&L for Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule including dismantling/ lowering down unserviceable Water Storage Tanks, complete and all as directed by Engineer-in-Charge.

S&F for Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

M&L for Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 Litre and not exc. 500 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete and all as directed by Engineer-in-Charge.

S&F for Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

M&L for PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F for Vitreous China Wash Hand Basin 450x300mm in size, White (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F PVC Waste Pipe 32mm dia (bore) having 600mm long and fixed complete to Walls, Ceilings or in Floors, etc.and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F Bath Wall Mixer with 15mm bore (dia) Spout, Chromium Plated with long Bend Pipe for Over Head Shower including Flanges and fixing-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F Chromium Plated Shower Rose with Shower Arm 100mm, Swival Joint including fixing to Steel Pipe and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F mild steel chromium plated Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F Glass Shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long and complete and all as directed by Engineer-in-Charge.

S&F Sink with Drainage Board made of Stainless Steel l.0mm thick Kitchen or Laboratory overall size 915 x 460mm having Bowl size 410x330x160 mm with Plugs, Washers and Wastes, PVC Waste Pipe 40mm bore (dia) of suitable Length, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe and fixed-in-repairs, complete all as specified and as complete all as specified and as directed.

S&F Brass Chromium Plated Sink Mixer 15mm bore (dia), Wall mounted with 122mm (5") Swivel Spout, Connecting Legs including Wall Flanges and fixing-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F CP Grating Round 100mm dia jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. MAKE : PRAYAG Cat No. 111 or as approved by GE

S&F PVC (SWR) Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded crushed stone aggregate) and fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls and Fixed-in-repairs,complete and all as directed by Engineer-in-Charge.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F PVC (SWR) 75mm bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with Access Door, etc., jointing with Solvent Cement and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F PVC (SWR) 110mm bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with Access Door, etc., jointing with Solvent Cement and Fixed-in-repairs,complete and all as directed by Engineer-in-Charge.

S&F Stack Clamp for Pipe 75mm/110mm/150mm bore (dia), made out of Flat Iron 50x5mm and 16mm dia Round Iron Stay including Bolts and Nuts and securing Ends of Stays to Wall or Roof and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

S&F Plain (White) PVC Board Scratch and strain free (weight not less 9 Kg/Sqm) in Door, Shelves for Cup Boards or Kitchen Cabinets, both side laminated, 18/19mm thick as required, jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing door catcher medium grade to hold approx 1000 mm opening cabinet door (01 No for each shutter), including supply and fixing of Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), including supply and fixing of Stainless steel frog hinges suitable for kitchen cupboards 18/19 mm PVC Celuka Board (minimum of 02 Nos for Each leaf ) and Fixed-in-repairs, complete and all as directed by Engineer-in-Charge.

M&L for MS Door packing Strip including fixing with nuts and bolts complete, all as specified and as directed by the Engineer-in-Charge

Taking down and fixing of shutter in same opening of any description exc 1 sqm and n exc 2 sqm complete and all as directed by Engineer-in-Charge.

M & L for waste coupling chromium plated for sink of 40mm dia including fixing, suitable for 32mm dia waste pipe complete and all as directed by Engineer-in-Charge.

M&L for preparing Newly Plastered Surfaces of wall and applying Three Coats of White Wash, complete and all as directed by Engineer-in-Charge.

AGGARWAL CONSTRUCTION CO.

M/s Sheoran Brothers Builders And Engineers

YESH BUILDERS

DCM ENTERPRISES