Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹17,500
Closing Date
8 Nov 2024, 3:00 pmClosed
Block Development Officer (B.Pt)
Panchayat Union office , Ammapettai.
Construction of Anganwadi Building at Thirubuvanam Panchayat in Ammapet Block under MLACDS 2024-2025 Tranche
2024_RDTN_498047_1
1333/2024/A2 Dt 23.10.2024
Open Tender
Civil Works - Buildings
Item Rate
Block Developement Office, Ammapettai
Please refer Tender documents.
9 documents required · 9 mandatory
₹0
₹17,500
Yes
7 Dec 2024
30 Oct 2024
8 Nov 2024
30 Oct 2024
8 Nov 2024
30 Oct 2024
Amount
Construction of Anganwadi Building @ Thirubuvanam Panchayat.
Earth work Excavation and depositing on bank with initial lead and lift in all classes of soil except hard rock requiring blasting including all labour charges etc.,complete for foundation
Collection and supply of M.sand and filling in to the basement including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete
Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete
Brick work in CM 1:5 mix using country bricks ground moulded of size 83/4"x41/4"x21/4" for the following including curing etc., complete complying with standard specifications.
i)Below Basement
ii) Above Basement
Supplying and erecting centering shuttering including necessary supports for plane etc., complete.
i)Below Basement
ii)Above Basement
iii)Sunshade
Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing
Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., as directed by the departmental officers complete complying with standard specifications.
Providing granolithic flooring with CC 1:2:4 mix 25 mm thick including cost and conveyance of all materials to site and all labour charges etc complete
Paving the floor with best approved quality fine polished shahabad stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)
Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. The Glazed tiles should be got approved from the Departmental officers before execution.
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Finishing the top of the roof with one course of Machine Pressed Tiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification
Plastering with CM 1:3,10mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete
Plastering with CM 1:5,12mm thick including cost and conveyance of all materials to site and all labour charges etc.,complete
Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete
Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.
Fabrication and supply & Delivery of MILD STEEL DOORS/WINDOWS of the following sizes with Single Leaf outer frame made of 35x35x5 mm equal M.S L angle and shutter frame made of 25 x25 x5mm equal M.S. L angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 2 Nos. Horizontal and 3 Nos. diagonal using MS flat of size 20x5mm fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 Nos. of holdfasts made of 35x35x5 mm equal M.S L angle, 1 No. of wind appliance, 2 Nos. of tower bolts,1 No of aldrop,2 Nos of handles, fixing the shutter with 6 Nos. of 6 inch hinges with outer frame of the door including painting the whole unit with one coat of best quality of red oxide primer etc., complete
Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
Cost, supply and fixing of Cuddappah slab 38/40mm thick for Shelf, Cupboard and Kitchen top including cost and conveyance of all materials and labour charges etc., complete
Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia
Electrical Works
Fan point & Light point (SD 18)
Ceiling fan (SD 110)
Supply and fixing of 4' 18 W LED tube light SD 87
Exhaust fan (SD 114)
Plug point (SD 38)
Service wire (SD 62)
EB Metre board (SD 125)
EB Main board (SD 145)
Provision for Water supply arrangements
Supplying & Fixing in position of baby friendly Water closet of approved quality including cost and conveance of all etc., complete
Supplying & Fixing in position of European Water closet of approved quality including cost and conveance of all etc., complete
Supplying & Fixing in position of White hand wash basin of good quality including cost and conveyance of all etc., complete
Provision for 500 litres water tank
Provision for Name Board etc., complete.
GST 18 % Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST 18 % Amount for total overall quoted amount above this row in column "BB" for all works in this package}
VENKATESAN S (BID ID -1181420)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .