Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹8.3 L
EMD Value
₹12,500
Closing Date
21 Sept 2023, 10:59 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
Lohith
INSTALLATION OF GYM EQUIPMENTS IN REGIONAL LAYOUT PARK UNDER WARD 44 MYSURU
DMA/2023-24/OW/WORK_INDENT3089
DMA/2023-24/OW/WORK_INDENT3089
Reserved
Other Works
Electronic Documents, First(One Cover)
DMA City Corporation Mysuru
3 documents required · 3 mandatory
₹500
₹12,500
6 Sept 2023
6 Sept 2023
13 Sept 2023
INSTALLATION OF GYM EQUIPMENTS IN REGIONAL LAYOUT PARK UNDER WARD 44 MYSURU
Clearing and grubbing road land including uprooting rank
vegetation, grass, bushes, shrubs, saplings and trees girth up
to 300 mm, removal of stumps of trees cut earlier and disposal
of unserviceab...
Earth work excavation by manual means for drains,canals, waste weir,
draft, approach channels, key trenches, foundation of bridges and
such simillar works in all kinds of soils , as per drawing and ...
Loading and Unloading of Stone Boulder/Stone aggregates/
Sand/Kankar/Moorum.
) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK
Cost of Haulage Excluding Loading and Unloading
Case-1 : Surfaced Road
A Taking output 10 t load and lead 10 km = 100 t.km ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF...
Providing Brick work with common burnt clay Non Modular bricks
of class designation 3.5 in foundation and plinth in Cement mortar
1:6 (1 cement : 6 coarse sand) including cost of all materials, labo...
Providing and laying heavy duty cobble stones 75mm thick interlock
pavers, using cement and course sand for manufacture of blocks of
approved size, shape and colour with a minimum compressive streng...
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :Two coats on new work after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :Two coats on new work after
thoroughly brooming the surface to remove all dirt, dust, mortar drops ...
Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x200x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS...
Providing and laying in position Reinforced cement concrete for all
Foundation works. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of...
Construction of rock fill embankment with broken hard rock
fragments of size not exceeding 300 mm laid in layers not
exceeding 500 mm thick including filling of surface voids with
stone spalls, bli...
Providing, laying & fixing cement base, precast, pre polished cement
concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty
tiles for flooring, treads of steps and landing, laid on a b...
Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4 and finished with CM 1:3 plastering and finishing cutting etc., complete. - of size 450 x 200 x 400 mm ---- WITH ALL LEAD ...
Supplying & Fixing open gym equipment - seated chest press made up of tubular steel of 2.5mm thickness, all galvanized and zinc dipped, joints are robotic welded, all welded joints are scalloped as ne...
Supplying & Fixing open gym equipment - AB trainer / sit up bench made up of tubular steel of 2.5mm thickness, all galvanized and zinc dipped, joints are robotic welded, all welded joints are scall...
Supplying & Fixing open gym equipment - waist twister triple made up of tubular steel of 2.5mm thickness, all galvanized and zinc dipped, joints are robotic welded, all welded joints are scalloped as ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-1 pdf.pdf
Tender Document • 0.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .