DAY TO DAY MAINT OF INTERNAL FITTINGS AND FIXTURE OF OTM ACCN UNDER GE HISAR AT HISAR MIL STN

Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed

All as per item No 1.00 (here-in-before) but excluding existing concealed conduit.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type pressed steel modular box covered with white modulat cover plate and frame for housing switches, sockets, fan regulators etc complete, all as specified & directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

All as per item No 3.00 (here-in-before) but ceiling fan /exhaust fan point controlled by one Number one way switch

All as per item No. 3.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board

All as per item No. 3.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.

All as per serial item No. 3.00 (here-in-before) but for one bell/buzzer point controlled by one bell push.

All as per srl item No. 3.00 (here-in-before) but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi stranded on independent board including provn of 2.50 Sqmm unsheathed, multistranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge.

M & L for point wiring for one light controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLS drawn through existing rigid PVC coduit and conduit accessories in existing concealed type in walls/ceilings and including change of pressed steel modular box with white modulat cover plate and frame for housing switches, sockets, fan regulators etc for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FRLS connected to common earth dolly complete complete all as specified and directed by Engineer-in-charge. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

All as per item No 9.00 (here-in-before) but ceiling fan /exhaust fan point controlled by one Number one way switch.

All as per item No. 9.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board.

All as per item No. 9.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.

All as per serial item No. 9.00 (here-in-before) but for One Light point controlled by two, two way switches, with cables 1.5Sqmm size.

All as per srl item No. 9.00 (here-in-before) but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi stranded on independent board including provn of 2.50 Sqmm unsheathed, multistranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs modular type switch 1 way 6Amp, 230Volts 1 modle complete all as specified and directed

Supply and fixing in repairs modular type switch 1 way 16Amp, 230Volts 1 modle complete all as specified and directed

Supply and fixing in repairs modular type socket 6Amp - 2/3 pin combined 2 modle 230 volts AC complete all as specified and directed

Supply and fixing in repairs modular type socket 6Amp/16 Amp - 2/3 pin combined 2 modle 230 volts AC complete all as specified and directed

S&F modular lamp holder, insluated body, with back plate suitable for batten fittings & complete all as specified & directed.

S&F modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

Supply only in replacement PVC flexible 3core cable with copper conductor of size 1.5sqmm complete all as specified & directed.

S&F modular Ceiling fan regulator 1 module 230V suitable for 1200 mm ceiling fan etc complete all as specified and directed.

Supply and fixing in repairs modular type bell push , 5 Amp 240 Volts.

S&F Bell ding dong type, AC, 230 Volts, single pole.

S & F sheet metal enclosure, DB SPN 8 way, double door powder coated, protection class IP-42 suitable for fixing mounting MCBs, DBs confirming to IS-13032, IS-8632, BS-5484 min with 200 Amps rated Aluminium bus bar, complete all as specified and directed.

S & F MCB SP, 6 to 32 Amps 240 Volts , 'C' curve, 10 KA, IS-8828 marked for fixing in DB complete all as specified & directed. . Note :-Make of MCB shall be same of that DB.

S & F MCB SPN 32 Amps 240 Volts , 'C' curve, 10 KA, IS-8828 marked for fixing in DB complete all as specified & directed. . Note :-Make of MCB shall be same of that DB.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts all as specified & directed.

S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts.

S&F flush type socket outlet multipurpose 3 Pin 5/6 Amp (with 2 pin outlet also) 230 volts AC complete all as specified and directed.

S&F flush type socket outlet multipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.

S&F lamp holder, insluated body, with back plate suitable for batten fittings & complete all as specified & directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F bell push flush type, 5 Amp 240 Volts.

S&F Bell ding dong type, AC, 230 Volts, single pole.

S & F sheet metal enclosure, DB SPN 8 way, double door powder coated, protection class IP-42 suitable for fixing mounting MCBs, DBs confirming to IS-13032, IS-8632, BS-5484 min with 200 Amps rated Aluminium bus bar, complete all as specified and directed.

S&F sheet metal enclosure distribution board SP&N, 12 way, double door, powder coated, protection class IP-42, suitable for mounting MCB, DBs confirming to IS-13032, IS-8632, BS-5484 with min 200 Amp rating Aluminium bus bar, complete all as specified & directed.

S & F sheet metal enclosure, DB TP&N 4 way, double door powder coated, protection class IP-42 suitable for fixing mounting MCBs, DBs confirming to IS-13032, IS-8632, BS-5484 min with 200 Amps rated Aluminium bus bar, complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps 240 Volts , 'C' curve, 10 KA, IS-8828 marked fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DB.

S&F MCB SPN, 32 Amps 240 Volts , type 'C' curve, 10 KA, IS-8828 marked fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DB.

S&F MCB TPN, 63 Amps 415 Volts , type 'C' curve, 10 KA, IS-8828 marked fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DB.

S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 6 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 6 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable submain wiring. Note:- Two lengths of 6 Sqmm cable, one length of 6 Sqmm cable and one length of PVC conduit will be measured as one length.

All as per item No 43.00 (here-in-before) but cable drwan through existing surfaces/concealed conduit including taking out existing unserviceable sub main wiring of size 2x 6sqmm. + 1x6sqmm earth wire.

All as per item No 43.00 (here-in-before) but cable drwan through existing surfaces/concealed conduit including taking out existing unserviceable sub main wiring of size 2x 1.5sqmm. + 1x1.5sqmm earth wire.

All as per item No 43.00 (here-in-before) but cable drwan through existing surfaces/concealed conduit including taking out existing unserviceable sub main wiring of size 2x 2.5sqmm.+ 1x2.5sqmm earth wire.

Supply and fixing LED lights fitting 1x 40W, 220V,AC wall mounted LED batten with PVC housing & integrated electronic driver with efficacy of 100lumen/W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED lights fitting 1x 10W, 220V,AC wall mounted LED batten with PVC housing & integrated electronic driver with efficacy of 100lumen/W connecting up with three c

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F sheet metal enclosure Single pole and neutral with a two pin and earth plug and socket complete with and including one 20 Amp SPN MCB 'C' curve complete all as specified. Make :- Indo Asian Cat Part No 810394 or equivalent of makes mentioned in list of makes here-in-after .

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore upto 7.50 metre long GI pipe light grade for earth wire protection fixed with poles/wall with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing. Note :- PCC chamber shall be constructed at least 1.5m away from the earth electrode and pipe for watering shall be provided in slanting manners.

S&F in replacement single core copper conductor cable 1.5 Sq mm PVC insulated, FRLS unsheathed multistranded 1100 volts grade.

S&F in replacement single core copper conductor cable 2.5 Sq mm PVC insulated, FRLS unsheathed multistranded 1100 volts grade.

S&F in replacement single core copper conductor cable 4.0 Sq mm PVC insulated, FRLS unsheathed multistranded 1100 volts grade.

S&F in replacement single core copper conductor cable 6.0 Sq mm PVC insulated, FRLS unsheathed multistranded 1100 volts grade

Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, any type (ie warm white, cool day light) & 220 V AC surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

ore flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, any type (ie warm white, cool day light) & 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for surface mounted including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

S&F in replacement LED street light fitting 20 Watt, 230V AC outdoor type with high pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 25mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.

S&F in replacement PVC rectangular block of mounting, switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 100mm x 100mm and 50mm deep sunk in wall including making good disturbed surfaces complete all as specified and directed. Note: The cost of cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable blocks is included in this item and nothing will be paid extra on this account.

S&F in replacement PVC rectangular block of mounting, switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 175mm x 100mm and 50mm deep sunk in wall including making good disturbed surfaces complete all as specified and directed. Note: The cost of cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable blocks is included in this item and nothing will be paid extra on this account.

S&F in replacement 3mm thick laminated sheet for housing switches for required size including drilling holes for fixing complete all as specified and directed.

S&F in replacement 10 W LED bollard light , IP 65 having step profile on top idel for out door lighting, typically giving off light/warm white complete all as specified & directed Note:- PCC foundation for bollard light including in this and nothing will extra paid to contractor. makr Orient cat No LLSBL-10-W or equivalent crompton, Havells, Wipro.

Supply and fixing in repairs round / square surface mounting 12watt LED panel in PDC PVC housing and high translucent frosted plastic diffuser with 100lm/ w efficiency complete all as specified and directed. Make : Havells or equivalent of makes

S&F LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp.