Equipment

Type of Centrifuge: Tabletop Refrigerated High-Speed Microcentrifuge Construction: The body should be made of heavy-duty C.R.C. (Cold Rolled Steel Sheet) material with a powder-coated finish. The construction should provide durability and corrosion resistance. Centrifugal Bowl: The centrifuge should be fitted with a stainless-steel centrifugal bowl. It should ensure easy cleaning and long-term protection against corrosion. Motor: The unit should have a well-balanced universal motor with carbon brushes. The motor should support smooth and stable operation at high speeds. Display: The centrifuge should be equipped with an LCD for operational monitoring. The display should show RPM, RCF, set time, and run time parameters. Timer: A digital timer with a range of 1−99 minutes should be provided. The timer should allow accurate control of centrifugation duration. Speed Range: The system should support a programmable speed range from 500 to 16,000 RPM. Speed adjustment should be possible in increments of 100 RPM. Temperature Control and Temperature Range: The centrifuge should include a P.I.D. (Proportional Integral Derivative)-based electronic temperature controller with an indicator. The controller should maintain accurate cooling performance during operation. Temperature Range - the cooling system should operate from room temperature down to −20 °C. The system should maintain ±2 °C accuracy in standby mode. Power Supply: The system should operate on a 220–240 V AC, 50 Hz single-phase power supply. The unit should be suitable for standard laboratory electrical conditions. Safety Feature: The equipment should be provided with a safety lid lock mechanism. This should prevent accidental opening during centrifugation. Refrigeration System: The centrifuge should have a compressor-based refrigeration system. The cooling compressor should automatically shut off during standby mode. Rotor specifications Rotor Type: The centrifuge should be supplied with an angle rotor. The rotor should ensure stable and safe centrifugation performance. Rotor Capacity: The rotor should support 4 × 50 mL tubes. It should be suitable for routine laboratory sample processing. Speed of Rotor: 7000 rpm for 4 × 50 mL tubes Tube compatibility: The rotor should be compatible with standard 50 mL centrifuge tubes. It should support secure and stable tube holding during operation. Instrument Warranty: Warranty must be a minimum of 1 year Optional Accessories. Centrifuge Tubes: 50 mL volume tubes may be provided as optional accessories. An optional rotor with (16×2 mL) capacity may be supplied.