ADDN ALTN OF 120 DU MD ACCN UNDER GE (P) BIKANER (Job No 24D AMWP 01/2023-24)

Amount

B/R PORTION

Taking down chowkhats or frames with shutter i.e. steel window or ventilator or PVC shutter (without taking off shutter from the frames) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

Taking down chowkhats or frames with shutter i.e. steel window or panelled shutter (without taking off shutter from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters, i.e. panelled shutter and skelton shutter (without taking off shutters from the frames both shutter) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

Supply and fixing factory made pressed steel frames of size 105 x 60mm (thickness of sheet shall be 1.25mm) for doors with one or more rebates including necessary lugs and lock strike plate, etc. , including fixing only butt hinges suitable Nos as directed for each leaf, and making good the wall with plaster in CM 1:6 complete all as specified and as directed by Engineer-in- charge. Note : - Butt hinges shall be measured and paid separately under appropriate item of BOQ as supply only.

Supply and fixing factory made pressed steel frames of size 125 x 60mm (thickness of sheet shall be 1.25mm) for doors with one or more rebates including necessary lugs and lock strike plate, etc. , including fixing only butt hinges suitable Nos as directed for each leaf, and making good the wall with plaster in CM 1:6 complete all as specified and as directed by Engineer-in- charge. Note : - Butt hinges shall be measured and paid separately under appropriate item of BOQ as supply only.

Supply only 100mm long MS butt hinges heavy duty type B-21 including steel screws complete all as specified and as directed by Engineer-in-charge.

Material and labour for PCC (1:3:6) type C-1, using 20 mm graded aggregated as in back filling of pressed steel door frame/chowkhat and bed block for fixing of hold fast complete all as specified and as directed by Engineer-in-Charge

Supply & fixing factory made plain framed panelled shutter 35mm thick made out of 2nd class hard wood with lock rail and panel (two panels) inserts of 9mm BWP commercial ply. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in- charge.

Supply & fixing factory made glazed and skeleton shutter 35mm thick made out of 2nd class hard wood kiln seasoned and chemically pressure treated, open rebated and prepared to receive glass, gauze, etc., but divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, fitted with cut and mitred beads for securing glass, gauze etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); complete all as specified and as directed by Engineer-in- charge.

Supply & fixing Fiber Glass Reinforced plastic (FRP) Door Frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate door frame moulded with two resistant grade unsaturated polyester plain and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete all as specified and as directed by Engineer-in- charge.

Supply and fixing to existing door frames 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

Supply and fixing 100mm long stainless steel butt hinges heavy duty type B-21 including steel screws for fixing complete all as specified and as directed by Engineer-in-charge.

Supply & fixing factory made steel ventilator box type using ERW hollow 'P' section and double angle frame, with top hung shutter (glazed shutter, fly proof shutter and fixed glass) including fittings like hinges, tower bolt, stop leg, handle, lock system etc. complete all as shown on drawing No BTD-903 Sheet No 1/2 and 2/2 or as directed by GE including fixing of lugs in PCC complete all as specified & directed. Note :- (i) The width /height as shown in drawing are tentative, however the same shall be adjusted as per actual opeining of vent. GE will approved the variation in the size of vent during execution at site (ii) Glass, wire cloth, guard bars/grill and painting shall be measured and paid separately under respective item of Sch (iii) Provision of all other items as shown & specified in on drawings and Provision of cutting holes of suitable depth in wall for inserting lugs etc including making good dismantled portion with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate and cement mortar (1:3) shall be deemed to be include in quoted rates.

Supply & fixing factory made steel window box type with provision for cooler using ERW hollow 'P' section and double angle frame, with side hung shutters (glazed shutter, fly proof shutter, fixed glass and top hung glass shutter) complete including fittings like hinges, tower bolt, stop leg, handle, lock system etc. complete all as shown on drawing No BTD-903 Sheet No 1/2 and 2/2 or as directed by GE including fixing of lugs in PCC complete all as specified & directed. Note :- Note :- (i) The width /height as shown in drawing are tentative, however the same shall be adjusted as per actual opeining of window. GE will approved the variation in the size of window during execution at site. (ii) Glass, wire cloth, guard bars/grill and painting shall be measured and paid separately under respective item of Sch (iii) Provision of all other items as shown & specified in on drawings and Provision of cutting holes of suitable depth in wall for inserting lugs etc including making good dismantled portion with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate and cement mortar (1:3) shall be deemed to be include in quoted rates.

Supply & fixing factory made steel window box type without provision for cooler using ERW hollow 'P' section and double angle frame, with side hung shutters (glazed shutter and fly proof shutter) complete including fittings like hinges, tower bolt, stop leg, handle, lock system etc. complete all as shown on drawing No BTD-903 Sheet No 1/2 and 2/2 or as directed by GE including fixing of lugs in PCC complete all as specified & directed. Note :- Note :- (i) The width /height as shown in drawing are tentative, however the same shall be adjusted as per actual opeining of window. GE will approved the variation in the size of window during execution at site. (ii) Glass, wire cloth, guard bars/grill and painting shall be measured and paid separately under respective item of Sch (iii) Provision of all other items as shown & specified in on drawings and Provision of cutting holes of suitable depth in wall for inserting lugs etc including making good dismantled portion with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate and cement mortar (1:3) shall be deemed to be include in quoted rates.

Material and labour for mild steel Framed work such as grills, ladder, cooler stand, cloth drying provision, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and for chowkhat frame of cup board shutter using angle iron or other section of size as directed conforming to Fe-290 Gde E-165, complete including fabrication, welding work, hold fast, fixing arrangement with material along wall complete all as specified and as directed by Engineer-in- charge. Note :- (i) Shutter and Continuous hinges shall be measured and paid separately under respective item of Sch

Supply & fixing 18mm thick single side prelaminated wood grain solid PVC sheet suitabley fixed in shelves, partitions and shelevs of built up cupboard, almirahs, book cases, toilet boxes, rack, pelmet and similar work with 6mm PVC beading support, screws, washer, plug etc including taking down old shutter and frame any type and condition complete all as specified and as directed by Engineer-in-charge.

Supply & fixing Continuous (piano) hinges, stainless steel, bright finish, width of flap when open 30mm including steel screws or welding work as required complete all as specified and as directed by Engineer-in-charge .

Supply & fixing aluminium anodised sliding door bolts 300mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in- charge.

Supply & fixing aluminium anodised sliding door bolts 150mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in- charge.

Supply and fixing anodised aluminium handle cast type 125mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.

Supply and fixing aluminium anodised barrel tower bolt of extruded section, 200mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.

Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.

Supply and fixing mild steel 300mm long rat tail rod pattern spring including roller and roller plate and fixing to frame fixed with and including steel screws complete all as specified and as directed by Engineer-in- charge.

Supply and fixing stainless steel tubes of minimum 25mm dia for curtain rod havey duty fixed to wall complete all as specified and as directed by Engineer-in-Charge. (Note : (i) The weight of the pipe shall be ascertained by BOO to be convened by CWE Bikaner and payment shall be made accordingly. BOO duly counter signed by GE shall be enclosed with final bill. (ii) Bracket / decorated end knobs (finials)/wall to wall bracket /stop roller etc. and fixing accessories shall be measured and paid separately under appropriate item of BOQ.)

Supply and fixing stainless steel fancy type bracket / decorated end knobs (finials)/wall to wall bracket /stop roller etc. as per site requirement for curtain rod including fixing accessories like PVC plug, screw etc, complete all as specified and as directed by Engineer-in-Charge. Note :- For purpose of payment, accessories as mentioned above for one door or one window shall be measured and paid as each set.

Supply & fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with screw in steel window (as shown in drawing) and with tinned tack nails and wooden bead in wooden shutter complete all as specified and as directed by Engineer-in- charge

Supply & fixing 3mm thick sheet glass ordinary quality in squares / retangular not exceeding 0.5sqm in each pane and fixed with oil putty or as directed complete all as specified & directed by Engineer-in- charge.

Supply & fixing 4mm thick figured glass pin head type in squares / retangular not exceeding 0.5sqm in each pane and fixed with oil putty or as directed complete all as specified & directed by Engineer-in- charge.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, at 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed by Engineer-in-charge.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre 300mm apart including drilling depth of holes not less than 300mm and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area at any distance exceeding 5 KM but not exceeding 10 KM from the site complete all as specified and as directed by Engineer-in-Charge

Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement laid in anels including making joints 12mm wide to the full depth of PCC at the rate of 3.00 mtr centre to centre and at every turning point, filling the Joints with and including bitumen and sand (1:3) by weight complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 25mm thick cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in sub base of floor for leveling course, surface finished rough complete all as specified and as directed by Engineer-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc. including brushing neat cement slurry with 3kg of cement per Sqm complete all as specified and as directed by Engineer-in-Charge.

Demolition of floor hearth or wall tilling including cement mortar bedding/screed but not backing including removing rubbish material from building and thrown in low lying empty area at any distance exceeding 5 KM but not exceeding 10 KM from the site complete all as specified and as directed by Engineer-in-Charge

Material and labour for Non Skid ceramic light coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed bed) in cement mortar (1:6) and finish the surface rough to receive the tile complete all as specified and directed by Engineer-in-Charge.

Material and labour for Non Skid ceramic light coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed bed) in cement mortar (1:6) and finish the surface rough to receive the tile complete all as specified and directed by Engineer-in-Charge.

Material and labour for Non Skid ceramic light coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor, tiles laid over and including bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

Material and labour for Non Skid ceramic light coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor, tiles laid over and including bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

Material and labour for Non Skid ceramic light coloured tiles 7 to 8mm thick square or rectangular as in skirting (cut from same size and type as floor tile ), dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (rendering) in cement mortar (1:4) and finish the surface rough to receive the tile including making good plaster surfaces (above skirting tile) to match the existing complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Glazed ceramic coloured tiles light coloured of size 300mmx 450mm, 7 to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (rendering) in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and as directed by Engineer-in-Charge.

Dismantling of Stone slabs of any description or thickness in floors, plateform, apron etc laid bedded and pointed in any mortar including removing rubbish material from building and thrown in low lying empty area at any distance exceeding 5 KM but not exceeding 10 KM from the site complete all as specified and as directed by Engineer-in-Charge.

Material and labour 16-18mm thickness approved shade granite of minimum size equal to width of slab (not less than 610mm) machine cut, granite duly factory grinding and polishing (table rubbed and mirror polished) and chamfering/rounding the outer edges, as in cooking platform and like laid over and including 20mm thick cement mortar (1:4) screed bed including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including accomodate the hole for gas pipe complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machine cut 20mm thick (minimum), Kota stone slab (size of slab not less than 550x500mm for flooring and in single piece for treads of staircase, laid over and including 20 mm thick bedding layer in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding and polishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machine cut 15-18mm thick, Kota stone slab as in riser of steps, skirting, dado and on pillar, laid over and including 10 mm thick bedding layer in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding and polishing by machine, including machine cutting to make it square or rectangular complete all as specified and as directed by Engineer-in-Charge.

Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed by Engineer-in-charge.

Re-fixing old serviceable 15mm bore galvanised steel water tubing (GI pipe) but new fittings like elbow, tee, union, socket, reducer etc. in new or old portion/position to walls, ceiling, floor etc complete all as specified and as directed by Engineer-in-charge. (Note :- Old serviceable pipe obtained from taking up or down (here-in-before) item of this BOQ shall be reused after necessary cleaning internally and rerunning the old screw threads as required.

Supply and fixing galvanized steel tubing (GI pipe) medium grade 15mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling or laid in floor including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge.

Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed by Engineer-in-charge.

Re-fixing old serviceable 20mm bore galvanised steel water tubing (GI pipe) but new fittings like elbow, tee, union, socket, reducer etc. in new or old portion/position to walls, ceiling, floor etc complete all as specified and as directed by Engineer-in-charge. (Note :- Old serviceable pipe obtained from taking up or down (here-in-before) item of this BOQ shall be reused after necessary cleaning internally and rerunning the old screw threads as required.

Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling or laid in floor including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge. Note for item GI tubing items :- Cost for cutting chases/groove as required for concealed pipe as directed shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, three layered with closed top/lid), hoisted and fixed in position including making inlet and out let connection including dismantling/taking down of existing unserviceable PVC water storage tanks of any description and capicity with float valve and gate valve complete all as specified and as directed by Engineer-in-charge.

Disconnecting existing serviceable PVC tanks (OHT) of capacity upto 500 litre, setting aside or lowering for repairs, cleaning , etc. and hoisting if required, removing all scale and dirt from tanks and from mouths of circulating pipes and keep in safe custudy. After the building repair work or as directed reconnecting and re-fixing in original position including all inlet and outlet water connection (as per existing) complete all as specified and as directed by Engineer-in-charge. (Note : New ball valve (float valve) and gate valve shall be measured and paid separately under appropriate item of BOQ.)

Supply and fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed by Engineer-in-charge.

Supply and fixing gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.

Supply and fixing in replacement bib tap with Wall Flange cast copper alloy, chromium plated, fancy type, long nose body, with round head/knob, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

Supply and fixing in replacement 15 mm bore chromium plated Angle stop valve with Wall Flange of cast copper alloy chromium plated, fancy type with round head/knob, half/full turn, screwed down high pressure screwed end for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

Supply and fixing in replacement concealed stop cock cast copper alloy, chromium plated, fancy type, long shank and cup, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

Supply & fixing in replacement cromium plated swivel shower rose of 125mm size with shower arm 195 mm long with bend of 45 degree with flange of any colour for fixing with 15mm dia pipe complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

Supply and fixing in replacement pillar tap cast copper alloy with capstan head, chromium plated, fancy type, high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

Supply and fixing Kitchen Rack / Dish Rack (Kitchen Stand or wall mounted) of size 914mmx787mmx250mm (Appx size) made out of Food Grade Stainless Steel 0.6 mm thick sheet/strip including necessary arrangements for plates and utencils to keep (Holds up to many plates or bowls To accommodate several place settings, Multipurpose), stylish modern streamline design, rust resistant, easy to assemble and clean including fitting accessories complete all as directed by Engineer-in-charge.

Supply & fixing in replacement stainless steel sink with drainage board made out of 1.00mm thick sheet , kitchen or laboratory with plugs, washers, waste coupling, waste pipe (flexible) 800mm long, including bedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to waste pipe; overall size 915mm x 460mm with bowl size 410mm x 355mm x 185mm complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement vitreous china wash basin, white, flat back of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe (flexible) 600mm long including bracket and cutting for and pinning in end of bracket or erecting with long screwed shanks & fly-nuts, flange end bedded in red lead cement complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.

Supply & fixing in replacement vitreous China squatting pan 'Orissa' pattern white of size 580mmx440mm white with integral foot rests, excluding flushing cistern, flush pipe above floor but including setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, including PVC flush pipe upto finished floor level, joints of flush pipe and trap make leakproof and testing upto entire satisfaction of Engineer-in-charge before filling concrete complete all as specified and as directed by Engineer-in- charge.

Supply and fixing in replacement PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engineer-in-Charge.

Supply and fixing chromium plated Soap Dish Holder with Round Flange, fixed on wall with chromium plated brass screws and PVC plug complete all as specified and as directed by Engineer-in-charge

Supply and fixing in replacement Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed along wall with chromium plated catcher brackets, brass screws and PVC plug complete all as directed by Engineer-in-charge.

Supply and fixing corner glass shelf of size 300x200mmx150mm, fancy type, toughened glass, with CP bracket and gurad railing, fixed along wall with CP brass screws and PVC plug complete all as directed by Engineer-in-charge.

Supply and fixing in replacement aluminium peg set of 3 to 5 hooks and fixed in position with steel screws complete all as specified and as directed by Engineer-in-Charge.

Dismantling/taking up or down CI soil waste and vent pipe 100mm dia of any description from wall and taking out from trenches including all fittings (bend, trap, cowl, branch piece, reducer etc) and removing from the site complete all as directed by Engr-in-Charge.

Supply and fixing 100mm bore cast iron soil waste and vent pipe (spun pipe, confirming to IS 3989) in any length with or without ears, laid in trenches or under floor including joints and jointng material complete all as specified and as directed by Engineer-in- charge. (Note:- Excavation and earthwork shall be measured and paid separately under respective item of Sch.)

Supply and fixing 100mm bore cast iron soil waste and vent pipe (spun pipe, confirming to IS 3989) in any length with or without ears, fixed to wall with and including MS stack clamps (interval of 1m), nut and bolts of suitable size and securing ends of stays to wall and including PCC work for grouting, including joints and jointng material, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 50mm bore cast iron soil waste and vent pipe (spun cast pipe, confirming to IS 3989) in any length with or without ears, fixed to wall with and including MS stack clamps (interval of 1m), nut and bolts of suitable size and securing ends of stays to wall and including PCC work for grouting, including joints and jointng material, complete all as specified and as directed by Engineer-in-charge.

Supply & fixing 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 100mm bore cast iron bends plain (any radius) with oval access door complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 100mm bore cast iron Bends (any radius) with duck's foot or heel rest complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 100mm bore CI branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) complete all as specified and as directed by Engineer-in- charge.

Supply and fixing in repair 100mm dia of long neck cast iron (spun) floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified and as directed by Engineer-in- charge.

Supply and fixing in repair 100mm dia cast iron (spun) Nahani trap including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified and as directed by Engineer-in- charge.

Supply & fixing cast iron reducer socket 100 to 50mm bore complete all as specified and as directed by Engineer-in- charge.

Supply & fixing cast iron cowl for 50mm bore pipe complete all as specified and as directed by Engineer-in- charge.

Demolition and breaking up drain pipes SGSW, AC or reinforced concrete pipe up to and including 150 mm bore pipes complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete (1:4:8), type D2 using 40mm graded stone aggregate as in bed of drain pipe of size 150mm bore (internal) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in- charge.

Material and labour for cement concrete (1:4:8), type D2 using 40mm graded stone aggregate as in bed of drain pipe of size 200mm bore (internal) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in- charge.

Material and labour for 150mm bore (internal dia) salt glazed stone ware (SGSW) drain pipe, grade ‘A’, laid on concrete bed to required slope in trenches, jointing with packed spun yarn and in cement and sand mortar (1:1) and tested complete all as specified and directed by Engineer-in-Charge. (Note : Excavation, earth work and concrete bed shall be measured and paid separately under appropriate item of BOQ.)

Material and labour for 200mm bore (internal dia) salt glazed stone ware (SGSW) drain pipe, grade ‘A’, laid on concrete bed to required slope in trenches, jointing with packed spun yarn and in cement and sand mortar (1:1) and tested complete all as specified and directed by Engineer-in-Charge. (Note : Excavation, earth work and concrete bed shall be measured and paid separately under appropriate item of BOQ.)

Material & Labour for Precast M-25 factory made manhole cover, set in CM (1:4) including necessary form work including dismantling old unserviceable cover and removing from site complete all as specified and as directed (Reinforcement and MS handle shall be measured and paid separately under appropriate item of this Sch). Note :- One manhole cover out of 100 manhole cover will be broken for randomly checking of reinforcement and no extra payment will be paid to contractor.

Material and labour cutting into existing manholes/septic tank for connecting new drain upto 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round to 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required complete all as specified & directed by Engineer-in-charge.

Material and labour for PCC ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge.

Material and labour for Cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels and drains and surface finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Taking down eaves gutters and rain water PVC pipes ( any size or pattern) including all fittings, heads, shoes, bends, swan-neck etc ( measured overall as fixed along the centre line over fittings and accessories) including cleaning and stacking serviceable (good condition as directed by Engineer-in-charge) pipe for re use and balance removing from the site complete as specified and as directed by Engineer-in- charge

Re-fixing old serviceable PVC pipe in any length, fixed along wall with and including new PVC stack clamps (interval of 1m) of suitable size & nut bolts including PCC work for grouting and jointing material for joints complete all as specified and as directed by Engineer-in-charge.

Supply & fixing 110mm bore uPVC grade ‘A’ as per IS : 13592 pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC stack clamps (interval of 1m) of suitable size & nut bolts including PCC work for grouting and jointing material for joints, complete all as specified and as directed by Engineer-in- charge.

Supply & fixing uPVC bends (any radius) suitable for 110mm bore pipe complete all as specified and as directed by Engineer-in- charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil including cutting of grass, roots, bushes if any and filling of lower portion with soil obtained from cutting after sepration of grass, roots, bushes etc and dressing and removing from site all grass, roots complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cess pits, manholes, for taking out old pipe and laying new pipe line, for laying cable etc. not exceeding 10 Sqm on plan and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engineer-in-charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material (surplus soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge.

Removing excavated material (surplus soil) to a distance not exceeding 250m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge.

Material and labour for hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified & directed by Engineer-in- charge.

Material and labour for 100mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer-in-charge.

Supply and laying/fixing 60 mm thick (M35 grade) precast interlocking tile/paving block factory made chamfered edge (made by using PU moulds on Vibrating Table Machine) using cement concrete and pigment, prepolished & preglazed, with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc., laid in required colour & pattern, over and including 20mm thick compacted bed of fine sand cushining, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand and complete all as specified and as directed by Engineer-in-Charge.

Supply and laying factory made kerb stone of M-25 grade cement concrete laid in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement:3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed.

Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of Brick walls or concrete surfaces, finishing the surface fair and even complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering 15mm thick in cement mortar (1:4) on otherthan fair faces of Brick walls or concrete surfaces, including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, finishing the surface fair and even complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only)

Material and labour for rendering 15mm thick in cement mortar (1:4) on any surface of Brick work or concrete surfaces, finishing the surfaceeven and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering 5mm thick in cement mortar (1:3) onconcrete surface of ceiling, finished fair, even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge.

Material and labour for brick work (old serviceable bricks obtained from dismantled item shall be reused ) straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete reinforced of any description such as slab/OHT staging slab, kitchen chimeny, chajjas, fins, shelves etc, including reinforcement cut as required to facilitate demolition and prepare the surface to casting/jointing new including removing rubbish material from building and thrown in low lying empty area at any distance exceeding 5 KM but not exceeding 10 KM from the site complete all as specified and as directed by Engineer-in-Charge

Material and labour for reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate as in chajjas, fascias, fins and like complete all as specified and as directed by Engineer-in-Charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ.

Material and labour for mild steel TMT bars 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Material and labour for mild steel TMT bars 8 to 10 mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Form work to soffits of suspended slabs such as flat roof slabs, floor slabs, shelf slab, landings and similar work not exceeding 200mm thick (horizontal or sloping) rough finished complete all as specified and as directed by Engineer-in- charge.

Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished complete all as specified and as directed by Engineer-in- charge.

Form work to chullah hoods, chajjas, troughs and similar items including edges rough finished complete all as specified and as directed by Engineer-in- charge.

Material and labour for cleaning and removal of loose concrete, prepare the sunken portion for treatment, filling the cracks with polymer modified mortar using Dr fixit pidicrete URP and providing 50mmx50xx angle fillets on the vertical upstands, parapet wall junction corners, services units and properly dressed by preparing polymer modified mortar with Dr Fixit pidicrete URP in the ratio of 1:3 by adding polymer 10% by weight of the cement, add the water little unit the required consistency is achieved and thereafter providing and applying two coats of acrylic polymer modified cementitious coating Dr Fixit pidifin 2K of M/s Pidilite industries having elongation at break 50% 5 bar resistance to positive water pressure, Adhesive strength ASTM D 7234-1 N/mm Sq, water vapor transmission as per ASTM E96 of 0.3 perms and crack bridging ability as per EN 1062-7 upto 1mm. Apply two coats of Dr Fixit pidifin 2k slurry @ coverage of 0.55-0.58 Sqm/kg of mix slurry. Provide and lay 45 gsm glass fibre mesh over the angle fillet when the first coat instill wet. Aloow the first coat to dry for 6 to 8 hours, then apply the second coat at a direction perpendicular to first coat. Allow the coating to air cure for 5 days before conducting water ponding test for 24 hrs etc or other equivalent product as approved by GE in sunken area complete all as per the manufactures instructions, including removing rubbish material from building and thrown in low lying empty area at any distance out side MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for 10mm thick rendering /plaster in cement mortar (1:3) in sunken area including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg and finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only under relevant item of BOQ).

Material and labour for removing loose disturbed or disintegrated old concrete surfaces of RCC beam, ceiling, slab, column, lintel, pardi, railing etc. cleaning thoroughly exposed reinforcement by sand blasting using suitable pump as directed by GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti-corrosive paint to the exposed reinforcement, supply and fixing welded wire mesh of size 100x100mm of 3mm dia wire and weight not less than 1.37 kg/Sqm and binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting as per IS 6433 in cement mortar (1:3) average thickness 30mm and thereafter 10mm thick rendering in cement mortar (1:3) including mixing of liquid WPC in mortar @ as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement to match the existing surface including removing rubbish material from building and thrown in low lying empty area at any distance out side MD land complete all as specified and as directed by Engineer-in-Charge. Note :- (i) The finished level of the surfaces shall be matched with the existing surface. (ii) Provision of additional reinforcement steel in case required and ordered shall be measured and paid separately.

Material and labour for PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed by Engineer-in-charge.

Dismantling brick terracing tiles single layer from roof laid and pointed in cement mortar ncluding cleaning and stacking serviceable tiles for re use and balance unserviceable tiles removing from the site complete all as specified and as directed by Engineer-in-charge.

Demolition/taking out of lime concrete/cement concrete padding/mud from roofs, any thickness, including removing / cutting uprooting grass, vegetations and roots of small plants etc on roof and surrounding/parapit wall etc, including removing rubbish material from building and thrown in low lying empty area at any distance exceeding 5 KM but not exceeding 10 KM from the site complete all as specified and as directed by Engineer-in-Charge

Material and labour for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in roof padding complete all as specified and directed by Engineer-in-Charge.

Material and labour for 10mm thick rendering /screed in cement mortar (1:4) on roof top surface including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg and finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only under relevant item of BOQ).

Material and labour for cleaning the roof surface including flashing and junction of parapets etc. by brushing, removing all dust and applying evenly a tack coat of bitumen primer at the rate of 0.40 kg per Sqm complete all as specified and directed by Engineer-in-Charge.

Material and labour for APP based polymeric membrane minimum weighing 3.80 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, torching with overlaps as recommended by the manufacturer complete all as specified and as directed by Engineer-in-charge.

Material and labour for 40mm thick brick tiles laid/bedded on screed bed 15mm thick in cement mortar (1:6), on surfaces of roof, joints grouted flush in cement mortar (1:3) mixed with liquid WPC @ as per manufacturer instruction per bag of cement of 50kg and including flush pointing as work proceed with same material complete all as specified in clause 11.27.3 of MES Sch Part-I (2009) complete all as specified and as directed by Engineer-in-Charge. (Note :- Water proofing compound shall be measured & paid separately as Supply only)

Material and labour for 40mm thick brick tiles (old serviceable tiles obtained from demolition/dismantled item shall be reused) laid/bedded on screed bed 15mm thick in cement mortar (1:6), on surfaces of roof, joints grouted flush in cement mortar (1:3) mixed with liquid WPC @ as per manufacturer instruction per bag of cement of 50kg and including flush pointing as work proceed with same material complete all as specified in clause 11.27.3 of MES Sch Part-I (2009) complete all as specified and as directed by Engineer-in-Charge. (Note :- Water proofing compound shall be measured & paid separately as Supply only)

Material and labour for Pre-cast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in block masonry with solid blocks of required size and setting in cement mortar (1:6) including necessary form work, complete all as specified and as directed by Engineer-in-Charge

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer complete all as specified and as directed by Engineer-in- charge.

Material and labour for Preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of pink primer complete all as specified and as directed by Engineer-in- charge.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one coats of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge.

Material and labour for Preparation of new plastered Internal wall surface by sand papering or by any other mean and after preparing the surfaces applying the following complete all as specified and as directed by Engineer-in-charge:- (a) Applying Wall care putty in two coats on complete surface and smoothening the surfcae with sand papers / by Mechanical method (hand electric grinder) prepatory to paint as directed. (b) Two coats of acrylic emulsion (interior) of approved tint/shade (Company Depot Tinted) over a coat of primer by using paint Roller.

Material and labour for Preparation of new plastered external wall surface by sand papering or by any other mean and after preparing the surfaces applying the following complete all as specified and as directed by Engineer-in-charge:- (a) Applying Wall care putty in two coats on complete surface and smoothening the surfcae with sand papers / by Mechanical method (hand electric grinder) prepatory to paint as directed. (b) Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of approved tint/shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces by using paint Roller.

Material and labour for Preparation of new plastered or concrete surface of ceiling surface by sand papering or by any other mean and after preparing the surfaces applying the following complete all as specified and as directed by Engineer-in-charge:- (a) Applying Wall care putty in two coats on complete surface and smoothening the surfcae with sand papers / by Mechanical method (hand electric grinder) prepatory towhite wash as directed. (b) Three coats of white wash by using paint brush.

Material and labour for complete removal of existing treatment on old ceiling surfaces of any desciption, preperation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology, complete all as specified and as directed by Engineer-in- charge and applying the following:- (a) Applying Wall care putty in two coats on complete surface and smoothening the surfcae with sand papers / by Mechanical method (hand electric grinder) prepatory to white wash as directed. (b) Two coats of white wash by using paint brush.

Material and labour for complete removal of existing treatment on Old internal wall surfaces of any desciption, preperation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology, complete all as specified and as directed by Engineer-in- charge and applying the following:- (a) Applying Wall care putty in two coats on complete surface and smoothening the surfcae with sand papers / by Mechanical method (hand electric grinder) prepatory to paint as directed. (b) Two coats of acrylic emulsion (interior) of approved tint/shade (Company Depot Tinted) over a coat of primer on old prepared surface by using paint Roller. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible.

Material and labour for complete removal of existing treatment on Old external wall surfaces of any desciption, preperation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology, complete all as specified and as directed by Engineer-in- charge and applying the following:- (a) Applying Wall care putty in two coats on complete surface and smoothening the surfcae with sand papers / by Mechanical method (hand electric grinder) prepatory to paint as directed. (b) Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of approved tint/shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old prepared surface by using paint Roller. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible.

E/M PORTION

Taking down carefully existing copper/aluminium point wiring (light/fan/sockets/bell/power point) complete with all accessories such as switch socket with sheet, ceiling rose, lamp holder including rusted/broken concealed conduit, junction and sunken boxes etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for concealed Point wiring for one light point/fan point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size) concealed in wall, including inner and outer plates (cover plate white colour, any module as per requirements) suitable for fixing the modular switches/ socket / regulator etc, including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) including fixing of switch/socket etc complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). Note:- (i) Where ever it is not feasible to cable drawn through existing PVC conduit in roof slab (for ceiling fan point only) due to blocked, casing caping in lieu of pipe shall be provided by contractor without any extra cost, cost for the same shall deemed to be included in the quoted unit rate.

All as per above Srl item No. 149 but for one socket out let 5 Amps point controlled by one switch (on same board) complete all as specified and as directed by Engineer-in-charge.(switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

All as per above Srl item No. 149 but for one socket out let 5 Amps point controlled by one switch (on independent board and not below the any other switch board) complete all as specified and as directed by Engineer-in-charge. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

All as per above Srl item No. 149 but for call bell point (on independent board) complete all as specified and as directed by Engineer-in-charge. (switches shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

Material and labour for concealed Point wiring for one light point controlled by two Nos- two way switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate white colour) suitable for fixing the modular switch, including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM(1:3), including fixing of switches complete all as specified and as directed. (switches shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).

Material and labour for concealed Point wiring for one socket out let 15/16 Amps point controlled by one switch (on independant board) (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate white colour, any module as per requirements) suitable for fixing the modular switches / socket, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switch, socket complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate).

Supply only modular switch 6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.

Supply only modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.

Supply only modular switch 6Amps, single pole, two way (1 module) complete all as specified and as directed by Engineer-in-charge.

Supply only modular Bell Push switch, 6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.

Supply only modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.

Supply only modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Ceiling Rose, polycarbonate, isolated body, surface bakelite 3 terminal, 240 volts, 5/6 Amp complete all as specified and as directed.

Supply and fixing lamp holder (ISI marked) polycarbonate cased body (B22 base), top line series, with back plate, 6Amps, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement electric calling Bell Ding Dong type, AC 230 Volts single pole including making elctric connection complete all as specified and as directed by Engr-in-charge.

Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCB’s shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) TPN, 4 Way, suitable for mounting Isolator/MCB, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCB/ISOLATOR shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing MCB ‘C’ curve suitable for 415 volts AC supply, 40 Amps, Four Pole with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB/panel complete all as specified and as directed by Engineer-in-charge

Supply and fixing MCB ‘B’ curve suitable for 240 volts AC supply, 32-40 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB/panel complete all as specified and as directed by Engineer-in-charge

Supply and fixing MCB ‘B’ curve suitable for 240 volts AC supply, 06 to 32 Amps, SP with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB/panel complete all as specified and as directed by Engineer-in-charge

Supply and fixing blanking plate suitable for any type of DB box complete all as specified and as directed by Engineer-in-charge.

Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge.

Taking down carefully existing serviceable LED bulb/lamp and keep in safe custudy. After the building repair work or as directed refixing the same in holder complete all as specified and as directed by Engineer-in-charge.

Disconnecting electric connection and taking down carefully serviceable LED tube light any type and keep in safe custudy. After the building repair work or as directed refixing the same including electric connection with and including new 1 Sqmm, 2 core flexible copper conductor cable from ceiling rose to tube light fitting including screw and PVC plug for fixing complete all as specified and as directed by Engineer-in-charge.

Disconnecting electric connection and taking down carefully serviceable geyser any capacity, painting the geyser complete body with synthetic enamel paint (colour as directed) by spray gun after scraping down old paint and keep in safe custudy. After the building repair work or as directed refixing /hanging the same including making all water connection with and including new PVC connection 15mm bore 600mm long heavy duty with brass nuts both side suitable for hot and cold water, including electric connection with and including three core PVC Insulated PVC Sheathed copper conductor flexible cable, hanging on wall with 04 No Nut bolts grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note :- (i) GE Office name and Serial Number (already alloted ) of geyser shall be written with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

Disconnecting electric connection and taking down carefully serviceable electronic/electric energy meter single phase and keep in safe custudy and dismantling/taking out existing meter box any type installed near staircase. After the building repair work or as directed refixing the same in same qtr complete with accessories in and including new wooden/PVC board and making incoming and outgoing electric wire connection connections in concealed conduit complete all as specified and directed by Engr-in-Charge. Note :- (i) Refixing of Electric energy meter shall be done in such a way with sufficient space to house prepaid meters in future to be installed at later stage without any further modification all as per direction of Engineer-in-charge. (ii) Contractor shall maintain a register duly mentioned KWH meter Ser No for each Qtr and last meter reading and submit to the office of AGE E/M (North) store yard as per the direction of Engineer-charge.

Supply and fixing electric water heater (Geyser) storage type ABS body of capacity 25 litre, BEE approved 5 Star rating, 230 V , single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermostat, NRV, PVC connection 15mm bore 600mm long heavy duty with brass nuts both side suitable for hot and cold water, including electric connection with and including three core PVC Insulated PVC Sheathed copper conductor flexible cable, 04 no Nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note :- (i) GE Office name and Serial Number (issued by Engr-In-Charge) of geyser shall be written with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

Disconnecting electric connection and taking down carefully old ceiling fans complete with blades, nut bolts, rubber reel, capacitor 2.5mfd, canopies etc and shall be deposited in AGE E/M (North) store yard complete all as specified and as directed by Engineer-in-charge.

Supply and hanging /fixing ceiling fan 1200 mm sweep AC Supply (Input Voltage Range ; 120 to 280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding of 'B' class insulation, single phase, maximum 30W (± 10%), Temperature rise 40 degree maximum without remote but with and including capacitive regulator, 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable size from ceiling rose to fan complete all as specified. Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on ceiling fan with red colour permanent marker and fixing of regulator on switch board, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account

Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50Hz, 900RPM, size 300mm sweep with blades and frame including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc including provision of cutting of existing wall for suitable opening as per fan, including electric connection with and including new 1 Sqmm, 2 core flexible copper conductor cable from ceiling rose to fan, fan hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface with cement mortar complete all as specified and as directed by Engineer-in-charge. Note :- (i) Serial Number as issued by Engr-In-Charge of exhaust fan and GE Office name shall also be written on exhaust fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

Supply and fixing ventilating Air fresher Fan of size 250mm sweep, single phase, 1200RPM, copper winding, made of sturdy Engineering plastic body complete with louvers shutter, including provision of cutting of wall for suitable opening as per fan and making good the disturbed surface as per existing, including electric connection with and including new 1 Sqmm, 2 core flexible copper conductor cable from ceiling rose to fan including fixing material complete all as specified and as directed by Engineer-in-charge. Note :- (i) Serial Number as issued by Engr-In-Charge of Air fresher Fan and GE Office name shall also be written on Air fresher Fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

Disconnecting electric connection and taking down carefully serviceable LED mirror light fitting 1x5 watt and keep in safe custudy. After the building repair work or as directed refixing the same including electric connection with and including new 1 Sqmm, 2 core flexible copper conductor cable from ceiling rose to mirror light fitting including screw and PVC plug for fixing complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of LED Bulkhead fitting 1 x 10 Watt, complete with Standard profile linear LED lighting fixture with extruded polycarbonate environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications, including taking down old unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max 10%. (f) IP rating : IP-65. (g) CCT : 6500K (h) Impact resistant polycarbonate housing, polycarbonate diffuser with silicon gasket (j) LED Driver of the same make as of the luminaire. (k) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection minimum 2.5 kV. (m) CRI : Minimum 80 (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

Supply and fixing energy efficient LED security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5Sqmm from ceiling rose to light fitting, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket along wall including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, including taking down old unserviceable light fitting any type with bracket complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

Taking out old sub main wiring of any conductor any size from conduit and taking down old unserviceable conduit with fittings, and making good disturbed surfaces of walls as per original complete all as specified and as directed by Engineer-in-Charge.

Material and labour for concealed sub main wiring (using colour coding such as red, black, white, green colour or as directed) with 4 Sqmm single core (03 run i.e 2 runs for main phase and neutral, 01 run for continues as earth wire) FRLSH PVC insulated unsheathed multistrand copper conductor cable drawn through and including PVC conduit 25mm dia (medium quality ISI marked), for independent circuit including all fitting arrangement i.e. PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. and including cutting of chases in wall and making good disturbed surfaces of walls as per original complete all as specified and as directed. Note :- Three runs of copper conductor cable and one run of PVC conduit including accessories shall be measured and paid as one unit (one RM length) for payment and extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.

Material and labour for concealed sub main wiring (using colour coding such as red, black, white, green colour or as directed) with 6 Sqmm single core (03 run i.e 2 runs for main phase and neutral, 01 run for continues as earth wire) FRLSH PVC insulated unsheathed multistrand copper conductor cable drawn through and including PVC conduit 25mm dia (medium quality ISI marked), for independent circuit including all fitting arrangement i.e. PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. and including cutting of chases in wall and making good disturbed surfaces of walls as per original complete all as specified and as directed. Note :- Three runs of copper conductor cable and one run of PVC conduit including accessories shall be measured and paid as one unit (one RM length) for payment and extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate.

Supply and laying or fixing or laid in trenches / ducts / through pipes / in floors / under roads / under hard standing /along poles and testing, Cross linked Polyethylene (XLPE) LT Cable, XLPE Insulated, PVC inner sheathed, bedded, galvanised steel strip or wire armoured cable (heavy duty) 1100 volt grade with stranded aluminium conductor having cross sectional area 25 Sqmm 4 core conforming to IS-7098 (Part-I)-1988 with upto date amendments, including taking out old unserviceable cable any size complete all as specified and as directed. Note :- (i) Excavation, earth work, sand cushioning, brick protection, boring/cutting of road and pipe shall be measured & paid separately under appropriate item of this Schedule.)

Supply and laying or fixing or laid in trenches / ducts / through pipes / in floors / under roads / under hard standing /along poles and testing, Cross linked Polyethylene (XLPE) LT Cable, XLPE Insulated, PVC inner sheathed, bedded, galvanised steel strip or wire armoured cable (heavy duty) 1100 volt grade with stranded aluminium conductor having cross sectional area 16 Sqmm 2 core conforming to IS-7098 (Part-I)-1988 with upto date amendments, including taking out old unserviceable cable any size complete all as specified and as directed. Note :- (i) Excavation, earth work, sand cushioning, brick protection, boring/cutting of road and pipe shall be measured & paid separately under appropriate item of this Schedule.)

Material and labour for sand cushioning, with dry and clean fine river sand (for under ground cable) 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and as directed. (Note:- Punned thickness shall be considered for payment purpose)

Supplying and laying Factory made un-reinforced precast concrete cable cover (ISI marked), class LV, type I flat, size 250mm x 150mm x 40mm complete all as specified and as directed.

Supply and fixing GI tubing light grade of size 40 mm bore, ISI marked, laid in trenches, under road for cable protection including fittings (elbow, tee, socket etc) complete all as specified and as directed. (Note:- Excavation and earthwork as required shall be measured and paid separately under respective item of Sch.)

Supply and fixing GI tubing light grade of size 25 mm bore, ISI marked, fixed along poles/walls or laid in trenches, under road for cable protection including fittings (elbow, tee, socket etc) including fixing arrangement if pipe fixed along pole/wall complete all as specified and as directed. (Note:- Excavation and earthwork as required shall be measured and paid separately under respective item of Sch.)

Material and labour for extra wiring for inverter socket out going to DB with 1.5 Sqmm single core, FRLSH PVC (using colour coding as directed) insulated multistrand copper conductor drawn through existing conduit (conduit for point wiring already catered in point wiring item of BOQ) including making connection to DB/light point/fan point and inverter socket) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing plug top 5/6Amp 3 pin good quality suitable for 240 volts, AC supply for inverter socket complete all as specified and as directed by Engineer-in-charge.

Supply, laying, jointing and testing of galvanized steel water tubing 25 mm bore ISI marked medium grade including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches, along walls or laid in floor including cutting and threading of pipe including taking up or down existing galvanised steel water tubing complete all as specified and as directed by Engineer-in- charge. (Note:- Excavation and Earth work shall be measured and paid separately under respective item of Schedule of Earth work)

Supply and fixing in replacement gun metal, globe or gate valve (ISI marked), with iron wheel head, screwed both ends suitable for 25mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing wire 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto main switch board, fixing with 02 Nos nuts and bolts. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) including taking out/dismantling old unserviceable earthing system complete all as specified and as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

Jasraj & Company

M/s Khanna Enterprises

ENGINEER CONSTRUCTION PVT. LTD.

M/s Jatindra Construction Company

M/S RAJINDER SINGH

RAJENDER ENTERPRISES

M/s Sourabh Construction Pvt. Ltd.

Pawansut Infra Projects Private Limited

Pioneer Enterprises