SPECIAL REPAIRS TO BLDG NO T01 and T02 AND SAINIK BHOJNALAYA OF 113 MC,MF DET AT DIMAPUR AND RENOVATION OF AREA IN FRONT OF GP C AND D MESS ALONG WITH PLACING OF INTERLOCKING TILES AND RESURFACING OF PLINTH,ROAD IN FRONT OF THE OFFICE OF NAGALAND EXC

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.

M&L cement concrete 1:4:8 type D2 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M & L for sand filling under floors or in foundations including watering and consolidating complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.

Excavation over areas, n.exc 1.5m deep,and getting out for foundation, etc. soft/loose soil.

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Hard core of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to true surface.

M&L RCC 1:2:4 type B1 ( 20mm graded stone aggragate) for lintel beam, cantilevers, bressummers,etc.

M&L 40mm thick DPC 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm.

Removing excavated soil to a dist n.exc. 50m and depositing where directed at a level n.exc.1.5m above the starting point

M&L for RCC 1:2:4 (20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and shelves and the like.

M&L Formwork to sides and soffits of floor or roof beams,beam haunchings, girders, bressummers, lintels, cantilevers, shelves including suports over hangs etc.

M&L for PCC 1:2:4 (40 mm graded stone aggregate) in foundations, filling and mass concrete.

M&L mild steel TMT bars in reinforcement 5mm dia and over including 10mm dia cut to length bent to shape required for stirrups with hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia allas specified.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth withot using extra cement.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces with CM (1:4)finished even and smooth without using extra cement.

M&L 75 mm thick PCC 1:4:8 type D2 (40mm graded aggregate) for floor sub base.

M&L 25mm thick PCC 1:2:4 type B1 (20mm graded aggregate) for floor .

M&L colored non skid ceramic tiles 7 to 8mm thick(square/rectangular) area of eachtile exceeding 0.06 Sqm but not exc 0.11 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed of CM 1:6 complete all as specified and directed.

M&L coloured glazed tiles 300x200x6mm thick on vertical surfaces such as skirting, dados and rises to steps etc set in jointed in neat cement slurry and pointed to match.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rail M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement of styles and plain colour of PVC sheet for top rail lock rail and bottom rail, on either side & gap insert for top rail bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed tohether with solvent cement, at site as per specification & drawing.

Supply and fixing 100mm size stainless steel butt hinges,medium weight, cold rolled complete all as specified and as directed.

S&F Extruded Aluminium alloy handles 125mm long, fabricated type anodised complete all as specified.

S & F 150mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S & F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F Aluminium anodised barrel tower bolts 100mm long of extruded section complete all as specified.

M&L for steel ventilator with top hung shutter including hinge, steel peg stay complete.

Supply and fixing 3 mm thick frosted glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge. Make : Modifloat/Ashai/Saint Gobain.

S&F Rolled sections as in roof truss, purlins including cleats GDE Fe 410-0-or Fe 310-0.

S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified .

S & F Pre-painted galvatume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F in repairs soap dish Size 160x160x1mm fixed with chromium plated brass screws as specified .

S&F as in replacement brass chromium plated Tubular towel rail 600mm long fixed with and including chromium plated brass screws complete all as specified.

S&F Vitreous China squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe complete all as specified.

Supply and fixing as in replacement 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge. Make : Parryware Model No C-8090 or equivalent approved make of Hindware/Commander.

S&F in repair of vitreous china urinal white bowl type including connection to flushing pipe and outgoing pipe including flushing pipe complete

S&F push tap any colour of PTMT screwed for iron pipe and fixed (Minimum weight 15mm-50 gms) suitable for urinals.

S&F in repair vitreous china wash hand basin including brackets, white size 550x400mm incl cutting for and pinning in ends of brackets incl waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other and fixed complete all as specified.

S&F PVC connection 15mm dia with PTMT nuts of length 450mm long all as specified and directed Make: Prayag Cat No: 323 or equivalent approved make

S & F in repairs waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed.

S&F as in replacement 75mm bore PVC (SWR) floor trap(ISI marked) outlet with grating incl jointing to waste pipe fixed in Cement concrete (1:2:4) type B1 (using 20mm graded store aggregate) and making good the disturbed surface to match with existing size,complete all as specified and as directed. Make: Prince/Supreme/Finolex

S & F Cast iron P trap with vent horn including jointing with solvent cement of 100mm dia complete all as specified.

S&F 15mm GI tubing 'Medium grade' with all fiting and fixed complete tom wall and celing or laid in floor of fllowing sizes complete all as specified.

-ditto- as per item No 46.00 above but 20mm bore.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed of 500 litres capacity, including ball valves 20 mm size, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed and 20mm nipple suitable for HDPE water tank complete all as specified and directed.

S&F bib taps, cast copper alloy with crunch or butterfly handle screwed down, fancy type chromium plated screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specified.

S&F as in replacement for 15mm Stop valves fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, complete all as specified and directed. Make: Essco Cat No. 513A/513B or Equivalent approved make.

S&F stop cock cast copper alloy, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specified.

-ditto- as item No 51.00 above, but for 20mm bore pipe.

S&F as in replacement of 15mm bore Pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F in repairs for 15mm dia of pipe Angle valves ,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed .

Supply and fixing as in replacement 100mm dia grating doom with waste hole of PTMT (minimum weight 25gms) complete all as specified and as directed by the Engr-in-Charge. Make: Prayag / Polytuf

S&F PVC (SWR) pipes of 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 75 mm bore PVC (SWR) branch piece single (SingleY) equal or unequal complete all as specified.

M & L in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F 110mm bore PVC (SWR) branch piece single (Single Y equal or unequal) complete all as specified and directed.

M & L Preparing new plaster surface apply two coat of cement base paint over a coat of primer on external walls complete all as specified.

M & L Preparing new plaster surface apply three coat of white wash on internal walls complete all as specified.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone agg )as in plinth protection finishing the cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 (using 40mm stone aggregate) as in channel/drain complete all as specified and directed.

Extra for forming fair finished drain or channels 30cm inner girth in cement concrete using extra cement including forms,mitred stopped ends etc complete all as specified and as directed.

Material and labour for precast Cement Concrete chequered tiles of size 200 x 200 x 25mm thick as in floor, set and jointed in neat cement slurry and pointed with cement laid over and including 20mm thick screed bed in CM (1:4) complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed.

Dismantling of frame work timber scantling 40 Sq cm and over in section in any position complete all as specifed and directed.

Dismantling boarding any descriptionfixed in any position with nails.

Dismantling mild steel or wrought iron work of any description not otherwise provided for.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St-240

S&F expanded metal, cut to length, bend to shape required and tying with and including annealed mild steel wirw not less than 0.9 mm dia or fixing with galvanised steel stables supplied and fixed complete to wood or steel members n exc 4 kg per sqm.

S&F 2nd class hard wood scantling as in purlins rafters & framed work etc clean sawn.

Supply and fixing for false ceiling with aluminium anodised snap grid of size (605X605mm) to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm, cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides with and including 4mm thick HSPC non asbestos fibre cement bldg boards and preparation surfaces and applying two coats of distember of size 600x600mm as false ceiling including proper hanging arrangement with 4 mm dia anodized galvanised iron wire and adjuster after and including dismantling of existing false ceiling including frame work complete all as specified and as directed by the Engineer-in-Charge.

M&L 25mm thick second class hard wood boarding, plained one side with butt joints as in eaves boards.

S&F 12mm prelaminted particle board, exterior grade, prelaminted one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

S&F brass continious piano hinges width of flaps 30mm.

M&L for prelaminated particle board 9mm thick but prelaminated both sides with decorative choice laminations.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&l roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.

M&L for brushing neat cement slurry with 3.0 kg of cement per Sq meter.

Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed of CM 1:6, complete all as specified and directed.

M&L for machine cut kota stone slab of size 600x600 mm 20 to 25 mm thick over 15 mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as directed.

M&L 25 mm thick cement concrete type B0 1:2:4 (12.5 mm graded aggregate) as in level course.

Material and labour for glazed ceramic coloured tiles of size 300x200x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.

Material and labour for precast Cement Concrete chequered tiles of size 200 x 200 x 25mm thick as in floor, set and jointed in neat cement slurry and pointed with cement laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates and like including weathering, slightly rounded or chamfered angles and throating including necessary formwork all as directed by Engr-in-charge.

Taking down Chowkhats or frames not exc. 1.5 sqm each with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames exc. 1.5 sqm not exc 4 Sqm each with shutters (without taking off shutters from the frames)

Taking down shutters of any description n.exc 1 sqm each.

M&L 2nd class hardwood plain, solid, straight chowkats and frames rebated on the solid, rounded or chamfered, put together with glue pinned at joints

M&L 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to received glass, guaze, etc sash bar edges of framing plain chamfered or rounded, fitted with cut and mitred beads of for securing glass, etc complete all as specified and directed.

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to received glass, guaze, etc (without sash bar) edges of framing plain chamfered or rounded, fitted with cut and mitred beads of for securing glass, etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clipos and providing fixing new ones.

Supply and fixing in repair mild steel galvanized iron wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 and fixed with tinned tacks or staples complete all as specified and as directed.

Supply and fixing 5.5 mm sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge. Make : Modifloat/Ashai/Saint Gobain.

S&F powder coated of any colour (thickness or powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Supply and fixing 100mm size stainless steel butt hinges,medium weight, cold rolled complete all as specified and as directed.

Supply and fixing 75mm size mild steel butt hinges complete all as specified and as directed.

S & F Aluminium anodized, barrel tower bolts, 200mm long of extruded section complete all as specified and as directed.

Supply and fixing 150mm long cast type,anodised handles complete all as specified and as directed.

Supply and fixing 125mm long cast type,anodised handles, complete all as specified and as directed.

S&F aluminium hat pegs solid body 125 mm to 175 mm fixed with brass screw complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed.

Materials and labour for 15 mm thick rendering on brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by wt of cement finished fair faces of brick/concrete surfaces even and fair without using extra cement . The work will be carried out upto tripple storey building the rate of scafolding is included for this item also. WPC will be measured and paid separately.

Supply only integral water proofing compound ( ISI marked )

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like. Note :- Reinforcement & formwork shall be measured and paid for separately.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & including 15 mm thick screed bed (bedding layer) in CM 1:4, all as specified & directed by Engineer-in-charge.

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of new untreated surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L for preparation of new untreated steel and iron surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for preparation of new untreated steel and iron surfaces of any description n.exc 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for preparation of old painted surfaces of any description n.exc 10 cm in width or girth and applying one coat of synthetic enamel paint.

M&L for 3 mm thick Birla white wall care putty on walls.

M&L for preparation of new plastered surface & applying two coats of oil bound distemper (OBD) over a coat of white chalktening on wall complete all as specified and directed by Engineer-in-charge.

Material and labour for applying one coats of oil bound distemper after and including complete removal of existing treatment of old plastered surfaces of walls complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls & applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.

S&F Harrison rails, mild steel,chromium plated with fixing brackets, stops, rollers etc.

S&F in repairs aluminium (die cast) body door closer hydrulically regulated, designation No 2, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed .

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing.

Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing.

M&L cutting chasses, pinningin making good to facing where required and pointing in cement mortar 1:3 to ends of landings, steps, cills, sunshades, shelves lintels tec and cutting chases for concealed conduit wiring etc making good cutting n.exc 10cm girth.

Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.

Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.

M&L dismantling water tank of exc 250 ltr not exc 500 ltr capacity.

Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 1000 litres with and including 20mm bore PTMT float and ball valve set including providing necessary connections complete all as specified and as directed by the Engr-in-Charge. Make : Syntex/Polywell/Polycon

Taking down AC/salt glazed ware pipes and fittings upto 110mm.

M & L in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to floors complete all as specified and directed.

M & L repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to floors complete all as specified and directed.

M & L in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

M & L repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC vent cowl 110 mm dia.

S&F PVC vent cowl 75 mm dia.

S&F 100mm bore stack clamps out of 50mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for nominal bore.

S&F CP toilet paper holder as approved by GE.

Supply and fixing as in replacement vitreous China wash down water closet pan (squatt pattern) orrisa pattern 580x440 mm pan white with front back inlet with integral 'foot rest' including provn lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100 mm CI 'P' trap.

Supply and fixing 20mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends after and including taking up or down old unserviceable valve complete all as specified and as directed. Make : Leader/Audco/Zoloto.

Supply and fixing as in replacement 125mm dia brass chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed.

S&F PVC shelves of ptmt fixed with and including chromium plated brass screws and wooden/plastic cleats.

S&F 0.71 mm thick plain aluminium sheeting, alloy 31000 H4 ridges, hips valley gutter, drip and staight flashing.

S & F stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, as fixed in repairs complete all as specified and directed.

Taking down and refixing the door in same pening after easing & adjusting of shutters of any description exc 1 sqm and n.exc 2 sqm each without taking down.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.

M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and as directed. Make:- Finolex/Havells/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme

One light point controlled by one, one way switch .

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin socket outlet 5 Amps on the switch socket combination.

One Exhaust/Ceiling fan point controlled by one, one way switch.

All as per item no. 160.00 here in before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in color as earth continously conductor connected to common earth dolly completed all as specified and directed. Make:- Finolex/Havells/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme

M&L for Switch piano flush type single pole, one way 5 Amp. Make:- Havells/Legrand/Anchor

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make:- Havells/Legrand/Achor

M&L for 20 W LED 4', Wall mounted LED batten with LED tuberod single/double side connection, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core and flexible pipe from ceiling rose to the light fitting complete all as specified and as directed. Make : Havells Cat No LHFXCEP1TNNW020(batten) & LHDLEFXD5LR020(LED Tube) or equivalent in Bajaj/Philips

M& L for 42 watt LED, 2'x2' recess mounte ceiling light fitting extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic drive etc. with all accessories internally pre wired. Make : Havells/Bajaj/CG

M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings. Make oF Lamp holder :- Plaza/SSK/Hager MakeOf Lamp :- Havells/Bajaj/Philips

M&L for MCB Distribution board Single door type SPN 2 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Make:- Legrand Cat No 507710 or equivalent in ABB/Siemens

M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens

M&L for MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make : Legrand Cat No 507887 or equivalent in ABB/Siemens

M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed. Make:- Legrand Cat No 408636 or equivalent in ABB/Siemens

Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 4.0 Sqmm single core multi stranded copper conductor cable (FRLSH) 1100 Volt grade along with one run of 4.0 Sqmm PVC insulated & Unsheathed copper conductor cable (FRLSH) 1100 Volt grade connected to common earth dolly as earth continuty conductor, drawn through 20 mm PVC Casing Caping complete all as specified and as directed. Note : Two runs of 4.0 Sqmm cable and one run 4.0 Sqmm Earth wire. Make : Richa/Finolex/RR Kabel. Make of caping/casing PVC boxes : Prestoplast/finolex/Supreme

All as per itenm No 171.00 here-in-before but with sub main wiring with two runs of 6.0 Sqmm wire and one run of 6.0 sqmm of 6.0 Sqmm for earth wire with multi standard copper conductors complete all as specified and directed. Make:- Finolex/Richa/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa

S&F exhaust fan, heavy duty, 230 mm sweep, 240 Volts, AC single phase, Double ball bearing, 1350 RPM, with louvers ,and making electrical connections with twin twisted, copper flexible cable of size 0.75 Sqmm upto ceiling rose including making necessary holes in walls and fixing arrangement and making good disturbed surfaces complete all as specified and directed. (Make: Havells, Model Ventil Air DB or equivalent of Crompton Greaves/Bajaj)

S&F for fixing Exhaust fan, Metallic, AC single phase 230/ 240 volts of size 300 mm sweep with louvre shutter including anchor bolt of suitable size for fixing arrangement and connecting up with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make : Usha/Bajaj/CG

S&F for Ceiling fan 1200 mm sweep, 5 star rating including suitable size of fan hook and connecting up with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make : Usha/Bajaj/CG

S&F in repair wall mounted fan, AC 50 Hz single phase 230 V 400 mm sweep 135 RPM 4 Nos plastic blades insulation class A including capacitor to ensure power factor more than 0.9 complete all as specified and directed by Engineer -in- Charge. Make : Havells/Bajaj/CG

M&L for Socket outlet, 2 in 1, 5 pin 5A flush type Make :Anchor/Plaza/SSK

M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type Make :Anchor/Plaza/SSK

M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type Make :Anchor/Plaza/SSK

M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc. Make :Anchor/Plaza/SSK

M&L for MCB SP 5-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens

M&L for MCB TPN 100 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand Cat No 408794 or equivalent in ABB/Siemens

M&L for metal clad AC socket point single pole and neutral enclosure with a tow pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed. Make : Legrand/Havells/L&T/Siemens

Dismantling the ceiling fan and its allied smaller parts and taking out the bearing /bushes and refixng the same with all parts such as down rod, canopes, fan blades etc replacing damaged split pins and screw nuts and spring washers ( for blades/body) as complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.

M&L for copper rewinding for suitable size complete to the existing ceiling fan complete all as specifed and as directed.

M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed.

M&L for replacement of capacitor 2.5 Mfd incl making electrical connection complete all as specified and as directed.

M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber with CI cover plate 10mm thick including angle iron frame , funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 441 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable

commercial enterprises

M/S Lucky Builders

M/S VIKASH TRADERS

m/s chakraborty enterprises

das enterprises