Renovation and Modernization of Co-Optex show room at Perambalur in Thanjavur Region

Amount

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

Electrical arrangements 74) Charges for assembling and fixing of ceiling "Fan"

77.4) Supplying and fixing of 25mm dia PVC pipe for TV/Telephone line

Annexure 8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture b. In First Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture b. In First Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture c. In First Floor

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

29.8.1) Supplying and fixing of Glazed tiles in C.M 1:2 10mm thick with Grout (Tile Joint Filler) using crushed stone sand

29.9.2) Supplying and laying of Ceramic tiles for flooring in C.M 1:3, 20mm thick with Grout (Tile Joint Filler) using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

38.4.2) Providing one coat of wall putty for new plastered surface

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

51.1) Supplying and fixing of HDPE water tank 1000 lit capacity with ISI mark

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 for soil line b) 160mm dia UPVC Non Pressure pipe

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself

69.1) Supply and fixing of 16 amps power plug socket with switch

77.5) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

77.5.2) Run off mains with MS pipe with open wiring 2 wires of 1.5 Sqmm copper PVC insulated unsheathed single core 1.1 KV cable

77.6) Run off main with 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable 1.1 KV Grade cable with ISI mark confirming to IS: 694:1990 in fully concealed.

84.4) Run of Main 4 wires of 6 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.2) Supplying and fixing of 20 Amps DP plug and socket in sheet enclosure with 32A DP MCB in Flush with wall with earth connection (For AC Plug)

114) Supplying and delivery of following PVC Aluminium armoured LTUG cable a) 3.5 core 25 Sqmm PVC Aluminium armoured LTUG cable

b) 2 core 25 Sqmm PVC Aluminium armoured LTUG cable

119) Supplying and delivery of 2 HP clear water vertical wet type submersible pumpset three phase suitable for borewell

119.1) Supplying and delivery of 2 HP open well submersible pumpset Duty - 50 lpm x 50m

120) Labour charges for erection of submersible pumpset in borewell / openwell upto 5 HP

122) Supplying and fixing of following dia of the UPVC, GI, PVC & GM specials a) 40mm dia UPVC Coupler

b) 40mm dia GI Elbow

c) 40mm dia UPVC Tee

d) 40mm x 32mm dia PVC Reducer

e) 40mm dia GI Bend

f) 40mm dia GI Union

g) 40mm dia GM Non Return valve

h) 32mm dia GM Gate valve

i) 40mm dia GI Hex Nipple

j) 25mm dia GM Gate valve

k) 40mm dia PVC Thread Adopter

l) 40mm dia PVC Female Thread Adopter

123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable for submersible pumpset

125.1) Supplying, laying and fixing of following dia PVC pipe below ground level a) 40mm dia PVC pipe

b) 25mm dia PVC pipe

126.1) Supplying and fixing of following dia M.S. Clamp set a) 150 mm dia MS clamp set

127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump

128) Supplying of 40mm dia Cast Iron Adopter

132.1) Charges for developing the Borewell with Air compressor of 300 CFM capacity (Minimum 8 Hrs)

132.2) Drilling of 150mm dia vertical bores in hard rock area to any required depth as directed by the departmental officers including labour charges for inserting of casing pipes and assembling in the drilled hole, including joint if necessary grouting the casing pipe etc., a) Upto 150m depth ending below Ground Level

b) From 150m upto 180m depth ending below Ground Level

c) From 181m upto 210m depth ending from Ground Level

d) From 211m upto 240m depth ending from Ground Level

e) From 241m upto 270m depth ending from Ground Level

f) From 271m upto 300m depth ending from Ground Level

g) From 301m upto 330m depth ending from Ground Level

133) Supplying and delivery of following dia PVC casing pipe as per IS 12818/2010 a) 200mm dia PVC Casing Pipe

133.1) Labour charges for inserting 200mm dia PVC casing pipe assembly (with slots or without slots) in the drilled hole including jointing the Pipes with PVC couplers with cement paste etc., complete

134) Supplying and fixing of 200mm dia PVC bore end cap

134.2) Supplying laying and fixing of following dia UPVC column pipe for Borewell a) 40mm dia UPVC column pipe

139) Supplying and fixing of Spot light (Master LED 3W-12W)

145) Supplying and fixing of CP Angle Cock Tap

146) Supplying and fixing of CP Two Way Bib Cock with Health Faucet

163) Supplying and fixing of 18W LED 3000K Square Type Recessed Fitting with LED

255.3) Providing and fixing of False ceiling with Gypsum Board suspended false ceiling using SAINT - GOBAIN GYPROC or Equivalent make

255.4) Providing and fixing of Gypboard Double skin partition of Gypsum Dry wall Double skin partition of 75mm thick using SAINT - GOBAIN GYPROC or Equivalent make

373) Supplying, testing, installation and commissioning of Air conditioner with copper coil 2 TR Split Type AC Unit - 5 Star Rated

374.1) Supplying and laying of 5/8" and 3/8" Copper pipe (Extra beyond 3 metres supplied with AC unit)

374.2) Supply and fixing of MS stand for fixing outdoor unit

375) Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay (V-Guard / equivalent brand)

378.4) Supplying and laying of Double Charged Vitrified tiles 600 x 600 x 8mm in CM 1:3, 20mm tk using crushed stone sand in all floors

567) Supply, installation, testing and commissioning of three phase, 8 way VTPN MCB DB double door type with IP 43 protection with 125A four pole MCB

586) Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control panel having the rating of 24 volt DC power supply

588) Supply, installation, testing and commissioning of Electronic Hooter / sounder providing on wall using fixing accessories like screws, plug, clamps

589) Supply, installation, testing and commissioning of Manual call point (MCP) providing on wall using fixing accessories like screws, plugs, clamps

590) Supply and laying of FRLS PVC insulated 2 core 1.5 Sqmm Armoured copper cable on ceiling / wall using fixing accessories like screws, plug, clamps

591) Supply, installation, testing and commissioning of conventional smoke detector suitably mounted on ceiling with MS junction box

601) Providing and fixing of 16" depth Silk goods display racks of size 7'0"x4'0"x1'4" depth made out of 18mm thick commercial plywood

602) Providing and fixing of 16" depth cotton goods display racks made out of 18mm thick commercial plywood and finished with laminate

603) Providing and fixing of cotton display counter of 2'0" depth and 2'6" height made out of 18mm thick commercial ply

604) Providing and fixing of silk display counter of 4'0" depth and 2'6" height made out of 18mm thick commercial ply

605) Providing and fixing of Billing counter of size 6'0" x 3'0" x 2'0" depth made out of 18mm thick commercial ply

606) Providing and fixing of Back storage of size 6'0"x2'6"x1'6" depth back unit for the billing counter made out of 18mm thick commercial ply

607) Providing and fixing Lasecut grills made out of 18mm MDF and designer grill pattern cut in laser cutting tools and to finish the grill with enamel spray paint or with polish to match the colour

608) Supply and fixing of FRP door shutter with FRP Door frames made out of FRP sheets of 3mm thick of over all size 65mmx50mm with rebate suitably reinforced using MS angle/Flats, cost of hold fasts and solid core FRP shutter panel of 5mm thick and hollow core frames of 3mm wall thickness for styles and rails etc.,

609) Providing and fixing of 12mm thick toughned glass door for the entrance of size 7'7" x 3'6" fixed with all required hardwares including floor spring, top pivot and required handles and locks

610) Providing and fixing of 12mm thick fixed glass on the side of the main door with required beading

611) Providing and fixing of Laminate sheet on to the surface of Gypsum board in ceiling and the partitions as per design by affixed with 1mm thick natural laminated sheet of approved colour using fevicol, nails etc.,

612) Providing and fixing of column panelling made out of 12mm thick commercial ply fied with GI frame work

613) Providing and fixing of standalone mirror panel of size 6'0"x2'0" made out of 18mm thick commercial ply

614) Providing and fixing of Premium vinyl back wall paper

615) Providing and fixing Utility storage for the staff and jaintor and other made out of 18mm thick commercial ply with the 12mm door finished with laminate including all required hardwares and all exposed edges shall be finished with edge binding tape

616) Supply and run of strip light

617) Supplying of BEE Energy efficient 1200mm Sweep ceiling Fan 5 star Rated, Invertor driven controlled by micro processor with 300mm down rod with regulator / remote control (35W)

618) Providing Co-axial TV cable laid through existing PVC conduits as required RG-06 Armoured

619) Supply and installation of CAT 6 unarmoured LAN cable for CCTV

620) Labour charges for laying of CAT 6 UTP unarmoured cable

621) Supply, Installation, Testing and Commissioning voice io MS enclosure including all required accessories

622) Supply, Installation, Testing and Commissioning data io MS enclosure including all required accessories

623) Supply, Installation, Testing and Commissioning TV io MS enclosure including all required accessories

624) Supply, Installation, Testing and Commissioning of the 45x45 casing/caping

625) Supply, installation of 8 channel HIKVISION Turbo HD stand Alone real time live display with H.264 compression in all channels, 1 HDMI output, 1 VGA interface with TCP IP connectivity for remove viewing

626) Supply, Installation of WD 2 TB Hard disk for NVR

627) Supply, installation of HIKVISION IR Dome colour camera 2 MP full HD night vision

628) Supply, installation of HIKVISION IR based out door IR bullet colour camera with 2 MP 1080p full HD night vision

629) Supply, installation of 12V DC Power supply for Individual Camera

630) Supply of video balun for camera video over CAT6 cable

631) Instalaltion of Existing 19" monitor for DVR

632) Installtion of existing VGA cable - 15m

633) Supply and fixing of 6U Rack

634) Supply and fixing of water drain pipe line (1" PVC pipe)

635) Providing Co-optex Logo 8mm imported clear Acrylic sheet Laser cut with HP latex Print, Back pasting with 3m Tape size 4 x4 ft

636) Providing Co-optex Letter 8mm imported milk white Acrylic sheet Laser cut with Plotting vinyl, Back pasting with 3m Tape size 4 x 5 ft

637) Front Elevation Louver with LED Stainless steel signage - 48x4ft Louver 4x1.75 inches Aluminium square 2mm thickness height 4 feet 2x2 inches square pipe frame work with two coat painting

638) Lollipop Double side LED profile Back light Board Signage size:3 ft width x 4 ft height - 6 No. Design, Fabrication, supply and installation of back light signboard 4x3ft LED Aluminium Fabric profile box suitable for outdoor use

639) Lollipop Double side LED profile Back light Board Signage with pole size : 3 ft width x 4 ft height - 1 No. Design, Fabrication, supply and installation of back light signboard 4x3 ft LED profile box suitable for outdoor use

640) Carting away the surplus earth / debris to alead of 16 km. including loading, unloading and dumping in the Corporation land as directed during execution

796) Painting the new walls with Two coats of Plastic emulsion paint in addition to one coat of approved primer coat

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of Pressed Tiles & Weathering Course

800.4) Chipping of concrete and roughening the surface

800.4.1) Dismantling clearing away and carefully stacking materials useful for reuse of brick masonry in cement mortar walls a) Above 3.00m height

800.5) Dismantling clearing away and carefully stacking materials useful for reuse for Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

800.13) Removing the damaged materials like, wooden false ceiling

800.14) Removing the existing damaged glass partitions and doors including clearing away the debris from site

800.15) Removing the existing damaged Mirror panelling including clearing away the debris from site

800.16) Removing the damaged electrical wiring and fitting and hand over to show room manager

800.17) Removal of damaged wall panelling and partition including clearing scrap pieces away from the site

800.18) Removal of existing AC units and copper pipe lines including carting away from the premises

800.19) Removal of existing damaged racks and clearing away the debris from site

800.20) Removal of existing damaged silk and cotton counter and clearing away the debris from site

800.21) Removal of cash counter including clearing away from the site

800.22) Removal of existing Centre units

800.23) Removal of existing Advertisement Flex banners with MS Tube frames with necessary scaffolding arrangements and hand over to show room manager

800.24) Servicing the Rolling shutter by replacing the damaged locking arrangements and servicing the rolling spring and rectifing the damaged portion of the shutter to the possible extent and refix the same including providing new locking arrangements

800.25) Injecting antitermite treatment with suitable chemical for show room floor