Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.1 CrAccepted-Finance | ₹5.1 Cr | 1 | Accepted-Finance L1 BIDDER |
| 2 | Rejected-Technical AT HOWRAH INDUSTRIAL CUM COMMERCIAL COMPLEX 24 BELLILIOUS ROAD 2ND FLOOR HOWRAH DIST BANKURA WEST BENGAL 713336 | HOWRAH | BANKURA | WEST BENGAL | 713336 | - | - | Rejected-Technical NOT ELIGIBLE FOR FINANCIAL BID |
| 3 | Not Admitted-Finance 159 KAILASH GHOSHI ROAD KOLKATA WEST BENGAL 700008 | KOLKATA | KOLKATA | WEST BENGAL | 700008 | - | - | Not Admitted-Finance Not qualified for AOC |
| 4 | Not Admitted-Finance 138 CANNING STREET GROUND FLOOR KOLKATA | KOLKATA | WEST BENGAL | - | - | Not Admitted-Finance Not qualified for AOC |
Tender Value
Refer Docs
EMD Value
₹5 L
Closing Date
13 Aug 2022, 4:00 pmClosed
CHAIRMAN
KOTWALI MIDNAPORE PASCHIM MEDINIPUR
Design Engineering Supply Storage Installation Commissioning, Trial Run Five Years Operation And Maintenance Of Clear Water Pumping Station with Power Distribution System Located at Nanurchawk and Power Distribution System for 10 Nos Tube well lo
2022_MAD_390711_1
WBMAD/ULB/MID/CM/e NIT- 127/22-23
Open Tender
Project Work
Item Rate
365 days
Midnapore Minucipality
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹5 L
11 Oct 2023
21 Jul 2022
16 Aug 2022
21 Jul 2022
13 Aug 2022
21 Jul 2022
Amount
PART-A ( SUPPLY PART) FOR NANURCHAWK Supply, delivery at site & storage of horizontal centrifugal pumps axially split case as per specification and technical offer complete with the coupling hub & all other accessories as per specification. Maximum allowable speed of pump shall be 1500 R.P.M. Group – I --- 325 M3 / hr at suitable head
Group – II --- 240 M3 / hr at suitable head
Group – I --- 150 M3 / hr at suitable head
Supply, delivery at site & storage of MS pipes, specials, joints, flanges & common delivery manifold with extended pipe line as per specification and Technical offer for Group – I, II & III Pump set
Supply, delivery at site & storage of valves complete with fixture as per specification and Technical offer & as follows. Sluice Valve for individual pump Suction pipe line for Group – I, II & III Pump set
Butterfly valve for delivery side of pumps fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line for Group – I, II & III Pump set
Non-Return Valve for individual pump delivery pipe line for Group – I, II & III Pump set
Butterfly valve fitted with electrical actuator suitable for local and control desk operation and display system for common delivery manifold for Group – I, II & III Pump set
Double throat air valve with Isolating Valve at common delivery manifold as per specification for Group – I, II & III Pump set
Supply, delivery at site and storage of M.S. dismantling joint assembly for common delivery manifold as per specification and Technical offer
Supply, delivery at site and storage of M.S. dismantling joint assembly for the individual pump suction pipe line as per specification and Technical offer for Group – I, II & III Pump set
Supply, delivery at site and storage of M.S. dismantling joint assembly for the individual pump delivery pipe line as per specification and Technical offer for Group – I, II & III Pump set
Supply, delivery at site and storage of M.S. puddle collar / plate for the individual pump suction pipe line as per specification .
Supply, delivery at site and storage of M.S. puddle collar / plate for delivery line as per specification .
Supply, delivery at site and storage of electromagnetic type Flow meter, Totaliser as per specification and Technical offer.
Supply, delivery at site and storage of Pressure gauges complete with fittings and fixture as per specification and Technical offer & as follows. Pressure gauge for Delivery side (0– 8 Kg / cm2)
Pressure gauge for common delivery manifold (0 – 8 Kg / cm2 )
Compound gauge for suction side [ (-) 1 – (+) 1] Kg / cm2 )
Supply, delivery at site and storage of pressure transmitter and level indicator complete with fitting and fixture as per specification and Technical offer & as follows. Pressure transmitter for delivery side ( 0 – 8 Kg / cm2 )
Pressure transmitter for common delivery manifold ( 0 – 8 Kg / cm2 )
Radar type Level Monitoring system for Clear Water Level complete with all accessories
Supply, delivery at site and storage of Horizontal squirrel-cage TEFC IE2 motor rated at 415V ±10%, 50Hz ±5%, 3Ph, 1500 R.P.M.(syn.) of adequate capacity to match the pump at sl. no. 1.1), 1.2) & 1.3) complete with coupling hub and all other accessories as per specification & Technical offer ( Rating not less than 55 / 45 / 22 KW for Group – I, II & III pumps respectively )
Supply, delivery at site and storage of multi panel HT PDB of minimum 800 A capacity suitable for operation at 11000 Volt, ± 10%, 3 phase, 50Hz, ± 5%, A.C. system as per specification and Technical offer
Supply, delivery at site & storage of ONAN, outdoor type 400 KVA Transformer, 11 KV / 433 volts Delta –Star transformer with neutral brought out as per specification
Supply, delivery at site and storage of MCC cum PDB of 800 A capacity at the Pump House, suitable for operation at 415 Volt, ± 10%, 3 phase, 50Hz, ± 5%, A.C. system as per specification
Supply, Delivery at site and storage of 525V automatic power factor improvement capacitor bank ( APFC ) with all inter connection complete suitable for 415 V, 50 Hz system as per specification
Supply, delivery at site & storage of Remote Control Desk & Instrument panel for the motor control, Power Distribution & other system as per specification and Technical offer
Supply, delivery at site & storage of stationary, 110 V DC, 100 Ah with 55 cells sealed maintenance free battery with float and boost battery charger cum DCDB as per Specification
Supply, delivery at site & storage of DCDB at Substation as per specification
Supply, delivery at site & storage of Exhaust Fans with Control panel (For Sub Station & Pump House) as per Specification.
Supply, delivery at site and storage of H.T., M.V. and Control Cable as per specification & as follows : From WBSEDCL’s Summation Panel to incoming panel of HT PDB, 11 KV (E ) grade, 300 sq mm dia AL conductor, XLPE insulated, armoured cable as per Specification.
From HT PDB to two number 400 KVA transformers ( 1 No. existing ) H.V. side terminal, 11 KV ( E ) grade, 300 sq mm AL conductor, XLPE insulated, armoured cable as per Specification.
From two nos. 400 KVA transformer secondary side to the two number incomers of MCC cum PDB , 1.1KV grade, 2 x 3.5 C x 300 sq mm Al. conductor, XLPE insulated armoured cable, 2 lengths each per incomer i.e. total 4 lengths.
From MCC cum PDB to Battery Charger, 1.1 KV grade, 4 C, 4 sq mm, stranded Cu. Conductor XLPE insulated armoured cable
From Battery Charger / DCDB at Pump House to DCDB at Sub-station, 1.1 KV grade, 4 C 4sq mm stranded copper conductor XLPE insulated armoured cable
From DCDB at Substation to H.T. PDB, 1.1 KV grade, 3 C, 2.5 sq mm stranded copper conductor XLPE insulated armoured cable for DC supply
From DB / LDB at Substation to H.T. PDB, 1.1 KV grade, 3C, 2.5 sq mm stranded copper conductor XLPE insulated armoured cable for AC Supply
From MCC cum PDB at Pump House to 2 Nos. DB / LDB’s at Sub Station & pump House (One no. in each location), 1.1 KV 4C, 4 sq mm Multi strand Copper conductor XLPE insulated armoured cable
From MCC cum PDB at Pump House to Exhaust Fan Control Panels at Pump House and DB / LTD at Substation to Exhaust Fan Control Panel (One no. in each location), 1.1 KV, 4C, 4 sq mm Multi strand copper conductor XLPE insulated armoured cable
From MCC cum PDB to all Valve Actuators, 1.1 KV, 4C, 2.5 sq mm Multi strand copper conductor XLPE insulated armoured cable
From Control Desk to all Pressure Transmitter & other Indicator, 1.1 KV 3C, 0.75 sq mm Screen Cable
From Control Desk to all motor Space Heaters, 1.1 KV 3C, 2.5 sq mm Multi strand Copper conductor XLPE insulated armoured cable
From DCDB at Pump House to Control Desk, 1.1 KV 3C, 2.5 sq mm Multi strand Copper conductor XLPE insulated armoured cable for DC supply
From MCC cum PDB to Control Desk, 1.1 KV 3C, 2.5 sq mm Multi strand Copper conductor XLPE insulated armoured cable for AC supply
From MCC cum PDB to Main Drive Motor 1.1KV grade, 2 x 3 C x 50 & 2 x 3C x 25 sq mm ( for Group – I, II & III pumps respectively) Al. conductor, XLPE insulated armoured cable, i.e. 2 lengths each per motor
Control Cable for AC & DC supply of stranded copper conductor of various sizes & grade and of suitable length as per specification for all remote control, indication and interlocking circuits
Supply, delivery at site and storage of Jointing materials as per specification & as follows All H.T. Cable jointing materials ( dry type )
All M.V. Cable jointing materials ( dry type)
All Control & Screen Cable jointing materials ( dry type)
Supply, delivery at site and storage of materials for Earthing system as per current I.E. Rule & specification for all equipment
Supply, delivery at site and storage of Lightning Arrestor along with earth strip and earth electrodes all complete as per specification and all other equipment required to comply with latest I.E. Rule
Supply, delivery at site & storage of fire extinguishers and fire buckets as follows: Dry Powder ( 5Kg. each )
ABC Type ( 5 Kg. each )
ABC Type ( 2 Kg. each ) portable
Fire Bucket ( 9 Litres )
Supply, delivery at site and storage of M.S. Structural materials for cable tray / rack, panel installation supports, Pipes & valves supports, fabricated stairs & all other fabrication work.
Supply, delivery at site and storage of all luminaries, fittings, fixtures complete with necessary cables with wires and all other accessories for inside lighting of pump house and Sub-station including Lighting Distribution Boards as per specification.
Supply, delivery at site and storage of Misc. Item such as rubber mats, Shock Treatment Chart ,Glow Sign Board etc. as per specification
Supply, delivery at site and storage of 3 T capacity HOT Crane with other allied equipment complete as per specification
Supply and delivery at site and storage of Miscellaneous items as per specification
PART-B ( INSTALLATION PART) FOR NANURCHAWK Installation at site of horizontal centrifugal pumps axially split case as per specification and technical offer complete with the coupling hub & all other accessories as per specification. Maximum allowable speed of pump shall be 1500 R.P.M. Group – I --- 325 M3 / hr at suitable head
Group – II --- 240 M3 / hr at suitable head
Group – I --- 150 M3 / hr at suitable head
Installation at site of MS pipes, specials, joints, flanges & common delivery manifold with extended pipe line as per specification and Technical offer for Group – I, II & III Pump set
Installation at site of valves complete with fixture as per specification and Technical offer & as follows Sluice Valve for individual pump Suction pipe line for Group – I, II & III Pump set
Butterfly valve for delivery side of pumps fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line for Group – I, II & III Pump set
Non-Return Valve for individual pump delivery pipe line for Group – I, II & III Pump set
Butterfly valve fitted with electrical actuator suitable for local and control desk operation and display system for common delivery manifold for Group – I, II & III Pump set
Double throat air valve with Isolating Valve at common delivery manifold as per specification for Group – I, II & III Pump set
Installation at site of M.S. dismantling joint assembly for common delivery manifold as per specification and Technical offer
Installation at site of M.S. dismantling joint assembly for the individual pump suction pipe line as per specification and Technical offer for Group – I, II & III Pump set
Installation at site of M.S. dismantling joint assembly for the individual pump delivery pipe line as per specification and Technical offer for Group – I, II & III Pump set
Installation at site of M.S. puddle collar / plate for the individual pump suction pipe line as per specification .
Installation at site of M.S. puddle collar / plate for delivery line as per specification .
Installation at sitte of electromagnetic type Flow meter, Totaliser as per specification and Technical offer.
Installation at site of Pressure gauges complete with fittings and fixture as per specification and Technical offer & as follows. Pressure gauge for Delivery side (0– 8 Kg / cm2)
Pressure gauge for common delivery manifold (0 – 8 Kg / cm2 )
Compound gauge for suction side [ (-) 1 – (+) 1] Kg / cm2 )
Installation at site of pressure transmitter and level indicator complete with fitting and fixture as per specification and Technical offer & as follows. Pressure transmitter for delivery side ( 0 – 8 Kg / cm2 )
Pressure transmitter for common delivery manifold ( 0 – 8 Kg / cm2 ) Radar type Level Monitoring system for Clear Water Level complete with all accessories
Compound gauge for suction side [ (-) 1 – (+) 1] Kg / cm2 )
Installation at site of Horizontal squirrel-cage TEFC IE2 motor rated at 415V ±10%, 50Hz ±5%, 3Ph, 1500 R.P.M.(syn.) of adequate capacity to match the pump at sl. no. 1.1), 1.2) & 1.3) complete with coupling hub and all other accessories as per specification & Technical offer (Rating not less than 55 / 45 / 22 KW for Group – I, II & III pumps respectively )
Installation at site of multi panel HT PDB of minimum 800 A capacity suitable for operation at 11000 Volt, ± 10%, 3 phase, 50Hz, ± 5%, A.C. system as per specification and Technical offer
Installation at site of ONAN, outdoor type 400 KVA Transformer, 11 KV / 433 volts Delta –Star transformer with neutral brought out as per specification
Installation at site of MCC cum PDB of 800 A capacity at the Pump House, suitable for operation at 415 Volt, ± 10%, 3 phase, 50Hz, ± 5%, A.C. system as per specification
Installation at site of 525V automatic power factor improvement capacitor bank ( APFC ) with all inter connection complete suitable for 415 V, 50 Hz system as per specification
Installation at site of Remote Control Desk & Instrument panel for the motor control, Power Distribution & other system as per specification and Technical offer
Installation at site of stationary, 110 V DC, 100 Ah with 55 cells sealed maintenance free battery with float and boost battery charger cum DCDB as per Specification
Installation at site of DCDB at Substation as per specification
Installation at site of Exhaust Fans with Control panel (For Sub Station & Pump House) as per Specification.
Installation / laying at site of H.T., M.V. and Control Cable as per specification & as follows : From WBSEDCL’s Summation Panel to incoming panel of HT PDB, 11 KV (E ) grade, 300 sq mm dia AL conductor, XLPE insulated, armoured cable as per Specification.
From HT PDB to two number 400 KVA transformers ( 1 No. existing ) H.V. side terminal, 11 KV ( E ) grade, 300 sq mm AL conductor, XLPE insulated, armoured cable as per Specification.
From two nos. 400 KVA transformer secondary side to the two number incomers of MCC cum PDB , 1.1KV grade, 2 x 3.5 C x 300 sq mm Al. conductor, XLPE insulated armoured cable, 2 lengths each per incomer i.e. total 4 lengths.
From MCC cum PDB to Battery Charger, 1.1 KV grade, 4 C, 4 sq mm, stranded Cu. Conductor XLPE insulated armoured cable
From Battery Charger / DCDB at Pump House to DCDB at Sub-station, 1.1 KV grade, 4 C 4sq mm stranded copper conductor XLPE insulated armoured cable
From DCDB at Substation to H.T. PDB, 1.1 KV grade, 3 C, 2.5 sq mm stranded copper conductor XLPE insulated armoured cable for DC supply
From DB / LDB at Substation to H.T. PDB, 1.1 KV grade, 3C, 2.5 sq mm stranded copper conductor XLPE insulated armoured cable for AC Supply
From MCC cum PDB at Pump House to 2 Nos. DB / LDB’s at Sub Station & pump House (One no. in each location), 1.1 KV 4C, 4 sq mm Multi strand Copper conductor XLPE insulated armoured cable
From MCC cum PDB at Pump House to Exhaust Fan Control Panels at Pump House and DB / LTD at Substation to Exhaust Fan Control Panel (One no. in each location), 1.1 KV, 4C, 4 sq mm Multi strand copper conductor XLPE insulated armoured cable
From MCC cum PDB to all Valve Actuators, 1.1 KV, 4C, 2.5 sq mm Multi strand copper conductor XLPE insulated armoured cable
From Control Desk to all Pressure Transmitter & other Indicator, 1.1 KV 3C, 0.75 sq mm Screen Cable
From Control Desk to all motor Space Heaters, 1.1 KV 3C, 2.5 sq mm Multi strand Copper conductor XLPE insulated armoured cable
From DCDB at Pump House to Control Desk, 1.1 KV 3C, 2.5 sq mm Multi strand Copper conductor XLPE insulated armoured cable for DC supply
From MCC cum PDB to Control Desk, 1.1 KV 3C, 2.5 sq mm Multi strand Copper conductor XLPE insulated armoured cable for AC supply
From MCC cum PDB to Main Drive Motor 1.1KV grade, 2 x 3 C x 50 & 2 x 3C x 25 sq mm ( for Group – I, II & III pumps respectively) Al. conductor, XLPE insulated armoured cable, i.e. 2 lengths each per motor
Control Cable for AC & DC supply of stranded copper conductor of various sizes & grade and of suitable length as per specification for all remote control, indication and interlocking circuits
Installation at site of Jointing materials as per specification & as follows All H.T. Cable jointing materials ( dry type )
All M.V. Cable jointing materials ( dry type)
All Control & Screen Cable jointing materials ( dry type)
Installation at site of materials for Earthing system as per current I.E. Rule & specification for all equipment
Installation at site of Lightning Arrestor along with earth strip and earth electrodes all complete as per specification and all other equipment required to comply with latest I.E. Rule
Installation at site of fire extinguishers and fire buckets as follows: Dry Powder ( 5Kg. each )
ABC Type ( 5 Kg. each )
ABC Type ( 2 Kg. each ) portable
Fire Bucket ( 9 Litres )
Installation at site of M.S. Structural materials for cable tray / rack, panel installation supports, Pipes & valves supports, fabricated stairs & all other fabrication work.
Installation at site of all luminaries, fittings, fixtures complete with necessary cables with wires and all other accessories for inside lighting of pump house and Sub-station including Lighting Distribution Boards as per specification.
Installation at site of Misc. Item such as rubber mats, Shock Treatment Chart ,Glow Sign Board etc. as per specification
Installation at site of 3 T capacity HOT Crane with other allied equipment complete as per specification
Dismantling and removal of Existing Pump motor sets, valves, pipes, LT Switchboard and other replacement items as per direction of EIC
Painting the whole installation as per specification & direction of E.I.C.
Carrying out pre-commissioning test on H.T & M.V equipments and making ready all H.T. & M.V. equipment for High/Medium pressure tests and submission of test reports
Carrying out Statutory High pressure tests on all H.T. equipment & medium pressure testing on M.V. Equipments as per specification including charges of Govt. Electrical Inspector.
Charges for Diesel Generator set/Temporary power connection from WBSEDCL for construction purpose.
Commissioning the whole installation including Trial Run of Pumps for 8 hrs. at a stretch operation as per specification & direction of E.I.C.
Operation & Maintenance of the whole installation for a period of five years ( after trial run ) deploying adequate number of working personnel for round the clock operation as per requirement, specification & direction of E.I.C.
PART - C ( SUPPLY PART ) FOR POWER DISTRIBUTION SYSTEM FOR 10 NOS. TUBEWELL Supply, delivery at site & storage of 415 V MCC cum PDB for 5 Nos. Submersible pump sets as per technical specification.
Supply, delivery at site & storage of 1.1 KV grade XLPE insulated Al. Conductor armoured cable of following sizes 3.5 Core 240 mm2
3.5 Core 185 mm2
3.5 Core 50 mm2
3.5 Core 25 mm2
Supply, delivery at site & storage of 175 / 200 KVA, 350V – 460 V Automatic voltage controller / stabilizer as per technical specification.
Supply, delivery at site & storage of jointing materials for all cables under Sl. No. 2.0 above
Supply, delivery at site & storage of materials for earthing system as per IE Rules and technical specification
Supply, delivery at site & storage of Lightning Arrestor along with earth strip and earth electrodes all complete as per specification and all other equipment required to comply with latest I.E. Rule
Supply, delivery at site & storage of fire extinguisher & fire buckets as per following ABC Type ( 5 Kg )
ABC Type ( 2 Kg ) Portable
Fire buckets ( 9 Ltrs. )
Supply, delivery at site & storage of all luminaries, fittings, fixtures complete with necessary cables with wires and all other accessories for inside lighting of 415V MCC cum PDB room including Lighting Distribution Boards as per specification.
Supply, delivery at site & storage of Misc. item i.e. rubber mat, shock treatment chart, Glow sign board
Supply, delivery at site & storage of 300 mm dia. Electro-magnetic type flow meter with totaliser as per technical specification
PART - D ( INSTALLATION PART ) FOR POWER DISTRIBUTION SYSTEM FOR 10 NOS. TUBEWELL Installation at site of 415 V MCC cum PDB for 5 Nos. Submersible pump sets as per technical specification.
Installation / laying at site of 1.1 KV grade XLPE insulated Al. Conductor armoured cable of following sizes 3.5 Core 240 mm2
3.5 Core 185 mm2
3.5 Core 50 mm2
3.5 Core 25 mm2
Installation at site of 175 / 200 KVA, 350V – 460 V Automatic voltage controller / stabilizer as per technical specification.
Installation at site of Jointing materials as per specification for all cables under Sl. No. 2.0 above
Installation at site of materials for earthing system as per IE Rules and technical specification
Installation at site of Lightning Arrestor along with earth strip and earth electrodes all complete as per specification and all other equipment required to comply with latest I.E. Rule
Installation at site of fire extinguisher & fire buckets as per following ABC Type ( 5 Kg )
ABC Type ( 2 Kg ) Portable
Fire buckets ( 9 Ltrs. )
Installation at site of all luminaries, fittings, fixtures complete with necessary cables with wires and all other accessories for inside lighting of 415V MCC cum PDB Room including Lighting Distribution Boards as per specification.
Installation at site of Misc. item i.e. rubber mat, shock treatment chart, Glow sign board
Installation at site of 300 mm dia. Electro-magnetic type flow meter with totaliser as per technical specification
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .